64 bits ?

Le
ptilou
Bonsoir,

J'ai un atom 2600N, sur un HP mini 4100-quelque chose 1 Go ram 320 Go
DD, intel dit 64 bits, j'arrive même pas à booter une fedora, alors
quel tourne à merveille sur ma tour PackardBell !
Y a t'il une solution pour faire tourner une distrib 64 bits ?

Merki

Ptilou
Vidéos High-Tech et Jeu Vidéo
Téléchargements
Vos réponses Page 1 / 5
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
jp willm
Le #24653951
Le 23/07/2012 21:58, ptilou a écrit :
Bonsoir,

J'ai un atom 2600N, sur un HP mini 4100-quelque chose 1 Go ram 320 Go
DD, intel dit 64 bits, j'arrive même pas à booter une fedora, alors
quel tourne à merveille sur ma tour PackardBell !
Y a t'il une solution pour faire tourner une distrib 64 bits ?



Booter sur un liveusb 64 bit pour voir


--
http://perso.orange.fr/willms/index.html
ptilou
Le #24654211
Bonjour,

Le mardi 24 juillet 2012 06:26:22 UTC+2, jp willm a écrit :
Le 23/07/2012 21:58, ptilou a �crit :
> Bonsoir,
>
> J'ai un atom 2600N, sur un HP mini 4100-quelque chose 1 Go ram 3 20 Go
> DD, intel dit 64 bits, j'arrive m�me pas � boote r une fedora, alors
> quel tourne � merveille sur ma tour PackardBell !
> Y a t'il une solution pour faire tourner une distrib 64 bits ?

Booter sur un liveusb 64 bit pour voir





C est ce que j ai fait marche pas, ma question est y a t il une limitation comme chez MS, et qu il faut 2 Go de ram ? ou/et comment avoir les infos su r bios ou firmware ?
Marche en 32 bits sur Fedora et Netbsd ...
Les infos tel que les adresses hexa donnee par le dmesg, ne sont ils pas un debut de piste ?


Ptilou
François
Le #24654351
Le 24/07/2012 08:56, ptilou a écrit :
C est ce que j ai fait marche pas, ma question est y a t il une limitation comme chez MS, et qu il faut 2 Go de ram ? ou/et comment avoir les infos sur bios ou firmware ?



Je ne pense pas qu'il y a une telle limitation, mais il faut savoir que
les distributions 64 bits sont plus gourmandes en mémoire que les 32
bits. Avec 1 Go de RAM, il n'y a aucune accélération à espérer du fait
d'une mémoire disponible moins importante. Les applis les plus lourdes
seront même pénalisées. C'est d'ailleurs ce que j'avais constaté en
comparant une ubuntu 32 bits et une ubuntu 64 bits sur un portable de 1
Go (partagé avec la vidéo).

Contrairement à W$, c'est la mémoire qui est déterminante dans la
rapidité d'exécution des programmes.

L'installation d'une version 64 bits ne se justifie que si tu envisages
une augmentation de ram au-delà de 2 Go, 2 Go étant le maximum géré en
32 bits.

--
François
YannicK
Le #24654381
Le 24/07/12 10:01, François a écrit :


L'installation d'une version 64 bits ne se justifie que si tu envisages
une augmentation de ram au-delà de 2 Go, 2 Go étant le maximum géré en
32 bits.




Ah ? Tu es sûr ? Pour moi un système 32 bits peut adresser jusqu'à 4 Go
de mémoire : 2 ** 32 = 4 294 967 296
Nicolas George
Le #24654411
YannicK , dans le message
Ah ? Tu es sûr ? Pour moi un système 32 bits peut adresser jusqu'à 4 Go
de mémoire : 2 ** 32 = 4 294 967 296



Avec ce genre de raisonnement simpliste, tu nous aurais prétendu qu'un 286
ne pouvait pas avoir plus de 16 ko de RAM (pour mémoire, la limite était de
1 Mo en mode réel (plus des poussières en bidouillant) et 16 Mo en mode
protégé).

Un x86_32 avec PAE peut adresser jusqu'à 64 Go. A contrario, avec la manière
dont Linux utilise son espace d'adressage, il faut commencer à bidouiller à
partir de 960 Mo.
Nicolas George
Le #24654401
François , dans le message
Je ne pense pas qu'il y a une telle limitation, mais il faut savoir que
les distributions 64 bits sont plus gourmandes en mémoire que les 32
bits.



C'est très variable, puisque seuls les pointeurs sont affectés : une
application qui utilise beaucoup de pointeurs va presque doubler
d'occupation mémoire, une application qui utilise surtout des données plates
va occuper presque exactement la même place. Presque toujours, ce qui est
vraiment gourmand en mémoire, ce sont les données plates : images, cache
disque, etc., donc le phénomène est très limité.

Avec 1 Go de RAM, il n'y a aucune accélération à espérer du fait
d'une mémoire disponible moins importante.



C'est totalement faux. À part le fait d'avoir un adressage sur 64 bits,
x86_64 est, par rapport à x86_32, une nouvelle architecture, avec en
particulier nettement plus de registres généraux et une ABI mise à jour. Ces
deux points offrent un gain de vitesse considérable pour les applications
gourmandes en CPU.

Je commence à trouver ça lourd de devoir corriger cette erreur à chaque fois
qu'elle sort.

C'est d'ailleurs ce que j'avais constaté en
comparant une ubuntu 32 bits et une ubuntu 64 bits sur un portable de 1
Go



Cette méthodologie est beaucoup trop approximative et non rigoureuse pour
signifier quoi que ce soit.

2 Go étant le maximum géré en
32 bits.



Totalement faux, cf. mon autre message.
Sergio
Le #24654851
Le Tue, 24 Jul 2012 10:01:28 +0200, François a écrit :


L'installation d'une version 64 bits ne se justifie que si tu envisages
une augmentation de ram au-delà de 2 Go, 2 Go étant le maximum géré en
32 bits.



4 Go !

(expérience faite) : un Linux 64 bits (Ubuntu en l'occurrence) avec 2Go
se débrouille très bien et ne prend pas beaucoup plus de mémoire que le
même en 32 bits.
Au contraire, plus rapide dès qu'il y a un peu de calcul (décoder/encoder
des vidéos par exemple).

Seule contrainte : Parfois des pilotes propriétaires n'existent qu'en 32
bits pour des matériels un peu vieux : J'ai eu ce cas avec mon scanner
Epson Perfection 1250 (problème résolu fortuitement en le faisant passer
pour un Plustek)[*].

[*]Me demander si vous avez ce problème, ou voir mon message dans le
forum ubuntu-fr.
Nicolas George
Le #24654961
Sergio , dans le message écrit :
une augmentation de ram au-delà de 2 Go, 2 Go étant le maximum géré en
32 bits.


4 Go !



Ça devient lourd, arrêtez de dire n'importe quoi quand vous ne savez pas.
ptilou
Le #24655001
Bonjour, amies du jour !
(Ne soyer pas comme moi )

Le mardi 24 juillet 2012 10:16:02 UTC+2, YannicK a écrit :
Le 24/07/12 10:01, François a écrit :

>
> L'installation d'une version 64 bits ne se justifie que si t u envisages
> une augmentation de ram au-delà de 2 Go, 2 Go étant le maximum g éré en
> 32 bits.
>

Ah ? Tu es sûr ? Pour moi un système 32 bits peut adresser jusqu' à 4 Go
de mémoire : 2 ** 32 = 4 294 967 296



La il disent que c'est 64 bit :
http://www.x86-secret.com/cpchw.php
La aussi :
http://fr.wikipedia.org/wiki/Intel_Atom

C'est quelle distrib qui fait du 64 bits ? ( architecture ? )

Voila le dmesg : ( merci )

Ptilou

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-7.fc16.i686 ( aproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Tue Nov 1 21:00:16 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f4af000 (usable)
[ 0.000000] BIOS-e820: 000000003f4af000 - 000000003f5af000 (reserved)
[ 0.000000] BIOS-e820: 000000003f5af000 - 000000003f6af000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6af000 - 000000003f6ef000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6ef000 - 000000003f6f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6f0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: n on-PAE kernel!
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Mini 110-4100/338D, BIOS F.01 12/20/ 2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usab le) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usab le)
[ 0.000000] last_pfn = 0x3f6f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask FE0000000 write-back
[ 0.000000] 2 base 020000000 mask FE0000000 write-back
[ 0.000000] 3 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 base 03F6F0000 mask FFFFF0000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x701060007 0106
[ 0.000000] found SMP MP-table at [c00fe250] fe250
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ ffa000-1000000
[ 0.000000] RAMDISK: 3e9eb000 - 3f4ae000
[ 0.000000] Allocated new RAMDISK: 3693b000 - 373fdef3
[ 0.000000] Move RAMDISK from 000000003e9eb000 - 000000003f4adef2 to 369 3b000 - 373fdef2
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 3f6ee120 0008C (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 3f6ec000 000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 3f6de000 09EE5 (v02 HP 338D 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 3f66e000 00040
[ 0.000000] ACPI: UEFI 3f6ed000 00236 (v01 HP 338D 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 3f6eb000 00038 (v01 HP 338D 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 3f6ea000 00078 (v02 HP 338D 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 3f6e9000 0003C (v01 HP 338D 00000001 ACPI 00040000)
[ 0.000000] ACPI: WDRT 3f6e8000 00047 (v01 HP 338D 00000000 ACPI 00040000)
[ 0.000000] ACPI: SLIC 3f6dd000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 3f6dc000 00028 (v01 HP 338D 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 3f6da000 00090 (v01 HP 338D 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 3f6d9000 00655 (v01 HP 338D 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 3f6d8000 00259 (v01 HP 338D 00003000 INTL 20100121)
[ 0.000000] ACPI: SSDT 3f6d7000 0020F (v01 HP 338D 00003000 INTL 20100121)
[ 0.000000] ACPI: WDAT 3f6d6000 00194 (v01 HP 338D 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 130MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003f6f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0003f4af
[ 0.000000] 0: 0x0003f6ef -> 0x0003f6f0
[ 0.000000] On node 0 totalpages: 259134
[ 0.000000] free_area_init_node: node 0, pgdat c0aa3f40, node_mem_map f6 14a200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 262 pages used for memmap
[ 0.000000] HighMem zone: 32684 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0- 23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000 9f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000 a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000 e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000001 00000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000 :a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_ node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5c00000 s29504 r0 d23744 u10 48576
[ 0.000000] pcpu-alloc: s29504 r0 d23744 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Tota l pages: 257104
[ 0.000000] Kernel command line: initrd=initrd0.img root=live:UUID >A4-4241 rootfstype=vfat rw liveimg overlay=UUID>A4-4241 quiet rhgb rd.luks=0 rd.md=0 rd.dm=0 BOOT_IMAGE=vmlinuz0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 by tes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 byte s)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4156928 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't wan t memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003f6f0)
[ 0.000000] Memory: 1003892k/1039296k available (4189k kernel code, 3264 4k reserved, 2691k data, 592k init, 131784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffa95000 - 0xfffff000 (5544 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc0ab9000 - 0xc0b4d000 ( 592 kB)
[ 0.000000] .data : 0xc081754a - 0xc0ab8200 (2691 kB)
[ 0.000000] .text : 0xc0400000 - 0xc081754a (4189 kB)
[ 0.000000] Checking if this processor honours the WP bit even in superv isor mode...Ok.
[ 0.000000] SLUB: Genslabs, HWalignd, Order=0-3, MinObjects =0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hardõ420000 softõ422000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 1595.777 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using tim er frequency.. 3191.55 BogoMIPS (lpj95777)
[ 0.000017] pid_max: default: 32768 minimum: 301
[ 0.000221] Security Framework initialized
[ 0.000235] SELinux: Initializing.
[ 0.000269] SELinux: Starting in permissive mode
[ 0.000443] Mount-cache hash table entries: 512
[ 0.001250] Initializing cgroup subsys cpuacct
[ 0.001312] Initializing cgroup subsys memory
[ 0.001347] Initializing cgroup subsys devices
[ 0.001353] Initializing cgroup subsys freezer
[ 0.001359] Initializing cgroup subsys net_cls
[ 0.001365] Initializing cgroup subsys blkio
[ 0.001380] Initializing cgroup subsys perf_event
[ 0.001488] CPU: Physical Processor ID: 0
[ 0.001493] CPU: Processor Core ID: 0
[ 0.001499] mce: CPU supports 5 MCE banks
[ 0.001516] CPU0: Thermal monitoring handled by SMI
[ 0.001525] using mwait in idle threads.
[ 0.002189] ACPI: Core revision 20110623
[ 0.045767] ftrace: allocating 24277 entries in 48 pages
[ 0.055568] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.056000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2= -1
[ 0.065996] CPU0: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz stepping 01
[ 0.166980] Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU driver.
[ 0.166994] ... version: 3
[ 0.166998] ... bit width: 40
[ 0.167002] ... generic registers: 2
[ 0.167006] ... value mask: 000000ffffffffff
[ 0.167011] ... max period: 000000007fffffff
[ 0.167015] ... fixed-purpose events: 3
[ 0.167019] ... event mask: 0000000700000003
[ 0.167907] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.168292] CPU 1 irqstacks, hardõ52c000 softõ52e000
[ 0.168298] Booting Node 0, Processors #1
[ 0.168305] smpboot cpu 1: start_ip = 9a000
[ 0.178422] Initializing CPU#1
[ 0.238931] CPU1: Thermal monitoring handled by SMI
[ 0.259076] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.259331] CPU 2 irqstacks, hardõ53a000 softõ53c000
[ 0.259337] #2
[ 0.259341] smpboot cpu 2: start_ip = 9a000
[ 0.269375] Initializing CPU#2
[ 0.329835] CPU2: Thermal monitoring handled by SMI
[ 0.349904] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.350143] CPU 3 irqstacks, hardõ550000 softõ552000
[ 0.350148] #3 Ok.
[ 0.350152] smpboot cpu 3: start_ip = 9a000
[ 0.360188] Initializing CPU#3
[ 0.420744] CPU3: Thermal monitoring handled by SMI
[ 0.440809] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.440872] Brought up 4 CPUs
[ 0.440881] Total of 4 processors activated (12767.09 BogoMIPS).
[ 0.442649] devtmpfs: initialized
[ 0.443184] PM: Registering ACPI NVS region at 3f5af000 (1048576 bytes)
[ 0.445966] atomic64 test passed for i586+ platform with CX8 and with SS E
[ 0.446026] RTC time: 14:17:31, date: 07/24/12
[ 0.446201] NET: Registered protocol family 16
[ 0.446775] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.446783] ACPI: bus type pci registered
[ 0.447087] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000 -0xefffffff] (base 0xe0000000)
[ 0.447096] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E82 0
[ 0.447101] PCI: Using MMCONFIG for extended config space
[ 0.447105] PCI: Using configuration type 1 for base access
[ 0.450736] bio: create slab <bio-0> at 0
[ 0.451102] ACPI: Added _OSI(Module Device)
[ 0.451109] ACPI: Added _OSI(Processor Device)
[ 0.451114] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.451120] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.454415] ACPI: EC: Look up EC in DSDT
[ 0.457612] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.470786] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.475267] ACPI: SSDT 3f567a90 002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
[ 0.476112] ACPI: Dynamic OEM Table Load:
[ 0.476120] ACPI: SSDT (null) 002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
[ 0.476487] ACPI: SSDT 3f566710 0069F (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.477308] ACPI: Dynamic OEM Table Load:
[ 0.477316] ACPI: SSDT (null) 0069F (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.483409] ACPI: SSDT 3f567e10 001CF (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.484298] ACPI: Dynamic OEM Table Load:
[ 0.484306] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.486945] ACPI: SSDT 3f565f10 0008D (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.487771] ACPI: Dynamic OEM Table Load:
[ 0.487779] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.510458] ACPI: Interpreter enabled
[ 0.510473] ACPI: (supports S0 S3 S4 S5)
[ 0.510530] ACPI: Using IOAPIC for interrupt routing
[ 0.524509] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.524941] ACPI: No dock devices found.
[ 0.524948] HEST: Table not found.
[ 0.524957] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.525484] _SB_.PCI0:_OSC invalid UUID
[ 0.525489] _OSC request data:1 8 1f
[ 0.525502] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.526201] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.526209] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.526217] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x00 0bffff]
[ 0.526224] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x00 0dffff]
[ 0.526230] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x00 0effff]
[ 0.526237] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x00 0fffff]
[ 0.526244] pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0x3f ffffff]
[ 0.526251] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfe bfffff]
[ 0.526285] pci 0000:00:00.0: [8086:0bf1] type 0 class 0x000600
[ 0.526357] pci 0000:00:02.0: [8086:0be1] type 0 class 0x000300
[ 0.526378] pci 0000:00:02.0: reg 10: [mem 0x44000000-0x440fffff]
[ 0.526389] pci 0000:00:02.0: reg 14: [io 0x40d0-0x40d7]
[ 0.526526] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.526563] pci 0000:00:1b.0: reg 10: [mem 0x44100000-0x44103fff 64bit]
[ 0.526697] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.526708] pci 0000:00:1b.0: PME# disabled
[ 0.526770] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.526906] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.526916] pci 0000:00:1c.0: PME# disabled
[ 0.526968] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.527093] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.527102] pci 0000:00:1c.1: PME# disabled
[ 0.527158] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.527243] pci 0000:00:1d.0: reg 20: [io 0x40a0-0x40bf]
[ 0.527306] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.527392] pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f]
[ 0.527454] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.527540] pci 0000:00:1d.2: reg 20: [io 0x4060-0x407f]
[ 0.527604] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.527699] pci 0000:00:1d.3: reg 20: [io 0x4040-0x405f]
[ 0.527792] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.527836] pci 0000:00:1d.7: reg 10: [mem 0x44105000-0x441053ff]
[ 0.527968] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.527978] pci 0000:00:1d.7: PME# disabled
[ 0.528016] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.528138] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.528324] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.528361] pci 0000:00:1f.2: reg 10: [io 0x40c8-0x40cf]
[ 0.528381] pci 0000:00:1f.2: reg 14: [io 0x40dc-0x40df]
[ 0.528401] pci 0000:00:1f.2: reg 18: [io 0x40c0-0x40c7]
[ 0.528421] pci 0000:00:1f.2: reg 1c: [io 0x40d8-0x40db]
[ 0.528441] pci 0000:00:1f.2: reg 20: [io 0x4020-0x402f]
[ 0.528461] pci 0000:00:1f.2: reg 24: [mem 0x44104000-0x441043ff]
[ 0.528523] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.528533] pci 0000:00:1f.2: PME# disabled
[ 0.528564] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.528659] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f]
[ 0.528908] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200
[ 0.528984] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.529112] pci 0000:01:00.0: reg 18: [mem 0x40004000-0x40004fff 64bit p ref]
[ 0.529194] pci 0000:01:00.0: reg 20: [mem 0x40000000-0x40003fff 64bit p ref]
[ 0.529417] pci 0000:01:00.0: supports D1 D2
[ 0.529423] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.529442] pci 0000:01:00.0: PME# disabled
[ 0.529592] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.529603] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.529613] pci 0000:00:1c.0: bridge window [mem 0x43000000-0x43ffffff ]
[ 0.529629] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x40ffffff 64bit pref]
[ 0.529759] pci 0000:02:00.0: [168c:0032] type 0 class 0x000280
[ 0.529802] pci 0000:02:00.0: reg 10: [mem 0x42000000-0x4207ffff 64bit]
[ 0.529882] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.529935] pci 0000:02:00.0: supports D1 D2
[ 0.529940] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.529950] pci 0000:02:00.0: PME# disabled
[ 0.529997] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.530008] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.530018] pci 0000:00:1c.1: bridge window [mem 0x42000000-0x42ffffff ]
[ 0.530033] pci 0000:00:1c.1: bridge window [mem 0x41000000-0x41ffffff 64bit pref]
[ 0.530152] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive dec ode)
[ 0.530175] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtr active decode)
[ 0.530183] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtr active decode)
[ 0.530190] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff ] (subtractive decode)
[ 0.530197] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff ] (subtractive decode)
[ 0.530204] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff ] (subtractive decode)
[ 0.530212] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff ] (subtractive decode)
[ 0.530219] pci 0000:00:1e.0: bridge window [mem 0x3f800000-0x3fffffff ] (subtractive decode)
[ 0.530226] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfebfffff ] (subtractive decode)
[ 0.530261] pci_bus 0000:00: on NUMA node 0
[ 0.530270] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[ 0.530527] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
[ 0.530686] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
[ 0.530806] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT]
[ 0.531031] _SB_.PCI0:_OSC invalid UUID
[ 0.531036] _OSC request data:1 1f 1f
[ 0.531047] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.531154] _SB_.PCI0:_OSC invalid UUID
[ 0.531159] _OSC request data:1 0 1d
[ 0.531170] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned c ontrol mask: 0x1d
[ 0.531175] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.540039] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.540182] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 1 5) *10
[ 0.540322] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 1 5) *11
[ 0.540461] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 1 5) *10
[ 0.540599] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 1 5) *0, disabled.
[ 0.540758] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 1 5) *0, disabled.
[ 0.540905] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.541043] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 1 5) *0, disabled.
[ 0.541304] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns =io+mem,locks=none
[ 0.541325] vgaarb: loaded
[ 0.541328] vgaarb: bridge control possible 0000:00:02.0
[ 0.541613] SCSI subsystem initialized
[ 0.541817] libata version 3.00 loaded.
[ 0.541962] usbcore: registered new interface driver usbfs
[ 0.542001] usbcore: registered new interface driver hub
[ 0.542101] usbcore: registered new device driver usb
[ 0.542330] PCI: Using ACPI for IRQ routing
[ 0.557290] PCI: pci_cache_line_size set to 64 bytes
[ 0.557414] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.557421] reserve RAM buffer: 000000003f4af000 - 000000003fffffff
[ 0.557428] reserve RAM buffer: 000000003f6f0000 - 000000003fffffff
[ 0.557729] NetLabel: Initializing
[ 0.557734] NetLabel: domain hash size = 128
[ 0.557738] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.557768] NetLabel: unlabeled traffic allowed by default
[ 0.557788] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.557800] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.559847] Switching to clocksource hpet
[ 0.560615] Switched to NOHz mode on CPU #0
[ 0.560727] Switched to NOHz mode on CPU #2
[ 0.560732] Switched to NOHz mode on CPU #3
[ 0.560777] Switched to NOHz mode on CPU #1
[ 0.579774] pnp: PnP ACPI init
[ 0.579813] ACPI: bus type pnp registered
[ 0.580798] pnp 00:00: [bus 00-ff]
[ 0.580806] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.580813] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.580819] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.580826] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.580832] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.580838] pnp 00:00: [mem 0x000e0000-0x000effff window]
[ 0.580845] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.580851] pnp 00:00: [mem 0x3f800000-0x3fffffff window]
[ 0.580858] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.581044] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (a ctive)
[ 0.581116] pnp 00:01: [io 0x0000-0x001f]
[ 0.581122] pnp 00:01: [io 0x0081-0x0091]
[ 0.581128] pnp 00:01: [io 0x0093-0x009f]
[ 0.581134] pnp 00:01: [io 0x00c0-0x00df]
[ 0.581140] pnp 00:01: [dma 4]
[ 0.581205] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.581231] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.581293] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.581474] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.581576] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.581585] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.581618] pnp 00:04: [io 0x00f0]
[ 0.581638] pnp 00:04: [irq 13]
[ 0.581704] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.581737] pnp 00:05: [io 0x002e-0x002f]
[ 0.581743] pnp 00:05: [io 0x004e-0x004f]
[ 0.581749] pnp 00:05: [io 0x0061]
[ 0.581754] pnp 00:05: [io 0x0063]
[ 0.581759] pnp 00:05: [io 0x0065]
[ 0.581764] pnp 00:05: [io 0x0067]
[ 0.581770] pnp 00:05: [io 0x0070]
[ 0.581775] pnp 00:05: [io 0x0080]
[ 0.581780] pnp 00:05: [io 0x0092]
[ 0.581785] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.581791] pnp 00:05: [io 0x0680-0x069f]
[ 0.581797] pnp 00:05: [io 0x1000-0x1003]
[ 0.581802] pnp 00:05: [io 0x1010-0x101f]
[ 0.581808] pnp 00:05: [io 0x1004-0x1007]
[ 0.581813] pnp 00:05: [io 0x0400-0x047f]
[ 0.581819] pnp 00:05: [io 0x0500-0x057f]
[ 0.581824] pnp 00:05: [io 0x0380-0x0383]
[ 0.581980] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.581988] system 00:05: [io 0x1000-0x1003] has been reserved
[ 0.581996] system 00:05: [io 0x1010-0x101f] has been reserved
[ 0.582003] system 00:05: [io 0x1004-0x1007] has been reserved
[ 0.582010] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.582017] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.582024] system 00:05: [io 0x0380-0x0383] has been reserved
[ 0.582033] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active )
[ 0.582105] pnp 00:06: [io 0x06a0-0x06af]
[ 0.582112] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.582208] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.582216] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.582224] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active )
[ 0.582252] pnp 00:07: [io 0x0070-0x0077]
[ 0.582267] pnp 00:07: [irq 8]
[ 0.582335] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.582383] pnp 00:08: [io 0x0060]
[ 0.582389] pnp 00:08: [io 0x0064]
[ 0.582402] pnp 00:08: [irq 1]
[ 0.582497] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.582546] pnp 00:09: [irq 12]
[ 0.582618] pnp 00:09: Plug and Play ACPI device, IDs SYN1e51 SYN1e00 SY N0002 PNP0f13 (active)
[ 0.583004] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.583011] pnp 00:0a: [mem 0x00000000-0x00003fff]
[ 0.583018] pnp 00:0a: [mem 0x00000000-0x00000fff]
[ 0.583024] pnp 00:0a: [mem 0x00000000-0x00000fff]
[ 0.583030] pnp 00:0a: [mem 0x00000000-0xffffffff disabled]
[ 0.583036] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.583171] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.583180] system 00:0a: [mem 0x00000000-0x00003fff] could not be reser ved
[ 0.583187] system 00:0a: [mem 0x00000000-0x00000fff] could not be reser ved
[ 0.583195] system 00:0a: [mem 0x00000000-0x00000fff] could not be reser ved
[ 0.583203] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.583212] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active )
[ 0.583532] pnp: PnP ACPI: found 11 devices
[ 0.583538] ACPI: ACPI bus type pnp unregistered
[ 0.627315] pci 0000:02:00.0: no compatible bridge window for [mem 0xfff f0000-0xffffffff pref]
[ 0.627325] PCI: max bus depth: 1 pci_try_num: 2
[ 0.627379] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.627387] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.627400] pci 0000:00:1c.0: bridge window [mem 0x43000000-0x43ffffff ]
[ 0.627411] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x40ffffff 64bit pref]
[ 0.627431] pci 0000:02:00.0: BAR 6: assigned [mem 0x41000000-0x4100ffff pref]
[ 0.627438] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.627446] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.627458] pci 0000:00:1c.1: bridge window [mem 0x42000000-0x42ffffff ]
[ 0.627469] pci 0000:00:1c.1: bridge window [mem 0x41000000-0x41ffffff 64bit pref]
[ 0.627484] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.627531] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.627543] pci 0000:00:1c.0: setting latency timer to 64
[ 0.627564] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.627574] pci 0000:00:1c.1: setting latency timer to 64
[ 0.627590] pci 0000:00:1e.0: setting latency timer to 64
[ 0.627599] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.627605] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.627612] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.627618] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.627625] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff]
[ 0.627632] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff]
[ 0.627638] pci_bus 0000:00: resource 10 [mem 0x3f800000-0x3fffffff]
[ 0.627645] pci_bus 0000:00: resource 11 [mem 0x40000000-0xfebfffff]
[ 0.627652] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.627658] pci_bus 0000:01: resource 1 [mem 0x43000000-0x43ffffff]
[ 0.627665] pci_bus 0000:01: resource 2 [mem 0x40000000-0x40ffffff 64bit pref]
[ 0.627672] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.627678] pci_bus 0000:02: resource 1 [mem 0x42000000-0x42ffffff]
[ 0.627685] pci_bus 0000:02: resource 2 [mem 0x41000000-0x41ffffff 64bit pref]
[ 0.627692] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.627699] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.627705] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.627711] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.627718] pci_bus 0000:03: resource 8 [mem 0x000e0000-0x000effff]
[ 0.627724] pci_bus 0000:03: resource 9 [mem 0x000f0000-0x000fffff]
[ 0.627731] pci_bus 0000:03: resource 10 [mem 0x3f800000-0x3fffffff]
[ 0.627738] pci_bus 0000:03: resource 11 [mem 0x40000000-0xfebfffff]
[ 0.627880] NET: Registered protocol family 2
[ 0.628036] IP route cache hash table entries: 32768 (order: 5, 131072 b ytes)
[ 0.628319] TCP established hash table entries: 131072 (order: 8, 104857 6 bytes)
[ 0.629339] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.629775] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.629782] TCP reno registered
[ 0.629791] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.629812] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.630180] NET: Registered protocol family 1
[ 0.630215] pci 0000:00:02.0: Boot video device
[ 1.728910] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 0101 0001
[ 1.729069] PCI: CLS 64 bytes, default 64
[ 1.729210] Unpacking initramfs...
[ 2.327037] Freeing initrd memory: 11020k freed
[ 2.337775] Simple Boot Flag at 0x44 set to 0x1
[ 2.340099] apm: BIOS not found.
[ 2.341435] Intel AES-NI instructions are not detected.
[ 2.341896] audit: initializing netlink socket (disabled)
[ 2.341921] type 00 audit(1343139453.146:1): initialized
[ 2.393320] highmem bounce pool size: 64 pages
[ 2.393334] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.402929] VFS: Disk quotas dquot_6.5.2
[ 2.403246] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.404940] msgmni has been set to 1724
[ 2.405128] SELinux: Registering netfilter hooks
[ 2.406408] alg: No test for stdrng (krng)
[ 2.406441] NET: Registered protocol family 38
[ 2.406623] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma jor 253)
[ 2.406741] io scheduler noop registered
[ 2.406746] io scheduler deadline registered
[ 2.406793] io scheduler cfq registered (default)
[ 2.407007] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.407096] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 2.407288] pcieport 0000:00:1c.1: setting latency timer to 64
[ 2.407369] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 2.407562] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.407645] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.407651] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.408406] intel_idle: MWAIT substates: 0x3020220
[ 2.408411] intel_idle: does not run on family 6 model 54
[ 2.408849] ACPI: Deprecated procfs I/F for AC is loaded, please retry w ith CONFIG_ACPI_PROCFS_POWER cleared
[ 2.409266] ACPI: AC Adapter [ACAD] (on-line)
[ 2.409779] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D: 00/input/input0
[ 2.410713] ACPI: Lid Switch [LID0]
[ 2.410892] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0 C:00/input/input1
[ 2.410903] ACPI: Power Button [PWRB]
[ 2.411072] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/inpu t/input2
[ 2.411081] ACPI: Power Button [PWRF]
[ 2.411443] ACPI: acpi_idle registered with cpuidle
[ 2.416942] Monitor-Mwait will be used to enter C-1 state
[ 2.417059] Monitor-Mwait will be used to enter C-2 state
[ 2.426370] [Firmware Bug]: Invalid critical threshold (0)
[ 2.428160] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.428198] ACPI: Thermal Zone [TZ01] (50 C)
[ 2.428289] ERST: Table is not found!
[ 2.428294] GHES: HEST is not enabled!
[ 2.428329] isapnp: Scanning for PnP cards...
[ 2.485585] ACPI: Deprecated procfs I/F for battery is loaded, please re try with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.485607] ACPI: Battery Slot [BAT0] (battery present)
[ 2.785240] isapnp: No Plug & Play device found
[ 2.785548] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.788218] Non-volatile memory driver v1.3
[ 2.788225] Linux agpgart interface v0.103
[ 2.791398] loop: module loaded
[ 2.791595] ahci 0000:00:1f.2: version 3.0
[ 2.791632] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 1 9
[ 2.791712] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 2.791783] ahci: SSS flag set, parallel bus scan disabled
[ 2.791876] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x 3 impl SATA mode
[ 2.791886] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[ 2.791897] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.793148] scsi0 : ahci
[ 2.793436] scsi1 : ahci
[ 2.793647] scsi2 : ahci
[ 2.793883] scsi3 : ahci
[ 2.794019] ata1: SATA max UDMA/133 abar port 0x4410410 0 irq 42
[ 2.794028] ata2: SATA max UDMA/133 abar port 0x4410418 0 irq 42
[ 2.794034] ata3: DUMMY
[ 2.794038] ata4: DUMMY
[ 2.794267] Fixed MDIO Bus: probed
[ 2.794483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.794526] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> I RQ 17
[ 2.794563] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.794571] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.794782] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.794821] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.794891] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.798771] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supporte d
[ 2.798809] ehci_hcd 0000:00:1d.7: irq 17, io mem 0x44105000
[ 2.807888] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.807939] usb usb1: New USB device found, idVendor6b, idProduct 02
[ 2.807950] usb usb1: New USB device strings: Mfr=3, Product=2, Seri alNumber=1
[ 2.807957] usb usb1: Product: EHCI Host Controller
[ 2.807962] usb usb1: Manufacturer: Linux 3.1.0-7.fc16.i686 ehci_hcd
[ 2.807968] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.808269] hub 1-0:1.0: USB hub found
[ 2.808281] hub 1-0:1.0: 8 ports detected
[ 2.808466] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.808501] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.808570] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> I RQ 17
[ 2.808586] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.808594] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.808752] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.808804] uhci_hcd 0000:00:1d.0: irq 17, io base 0x000040a0
[ 2.808922] usb usb2: New USB device found, idVendor6b, idProduct 01
[ 2.808930] usb usb2: New USB device strings: Mfr=3, Product=2, Seri alNumber=1
[ 2.808936] usb usb2: Product: UHCI Host Controller
[ 2.808941] usb usb2: Manufacturer: Linux 3.1.0-7.fc16.i686 uhci_hcd
[ 2.808947] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.809221] hub 2-0:1.0: USB hub found
[ 2.809233] hub 2-0:1.0: 2 ports detected
[ 2.809383] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> I RQ 19
[ 2.809400] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.809408] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.809542] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.809614] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[ 2.809699] usb usb3: New USB device found, idVendor6b, idProduct 01
[ 2.809706] usb usb3: New USB device strings: Mfr=3, Product=2, Seri alNumber=1
[ 2.809713] usb usb3: Product: UHCI Host Controller
[ 2.809718] usb usb3: Manufacturer: Linux 3.1.0-7.fc16.i686 uhci_hcd
[ 2.809724] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.810021] hub 3-0:1.0: USB hub found
[ 2.810032] hub 3-0:1.0: 2 ports detected
[ 2.810209] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> I RQ 18
[ 2.810225] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.810234] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.810376] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.810441] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[ 2.810532] usb usb4: New USB device found, idVendor6b, idProduct 01
[ 2.810539] usb usb4: New USB device strings: Mfr=3, Product=2, Seri alNumber=1
[ 2.810545] usb usb4: Product: UHCI Host Controller
[ 2.810550] usb usb4: Manufacturer: Linux 3.1.0-7.fc16.i686 uhci_hcd
[ 2.810556] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.810850] hub 4-0:1.0: USB hub found
[ 2.810862] hub 4-0:1.0: 2 ports detected
[ 2.811005] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> I RQ 16
[ 2.811021] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.811029] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.811170] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.811241] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
[ 2.811323] usb usb5: New USB device found, idVendor6b, idProduct 01
[ 2.811331] usb usb5: New USB device strings: Mfr=3, Product=2, Seri alNumber=1
[ 2.811337] usb usb5: Product: UHCI Host Controller
[ 2.811342] usb usb5: Manufacturer: Linux 3.1.0-7.fc16.i686 uhci_hcd
[ 2.811348] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.811615] hub 5-0:1.0: USB hub found
[ 2.811627] hub 5-0:1.0: 2 ports detected
[ 2.811911] usbcore: registered new interface driver usbserial
[ 2.811940] USB Serial support registered for generic
[ 2.811972] usbcore: registered new interface driver usbserial_generic
[ 2.811977] usbserial: USB Serial Driver core
[ 2.812085] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0 x60,0x64 irq 1,12
[ 2.815373] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.815393] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.815682] mousedev: PS/2 mouse device common for all mice
[ 2.816287] rtc_cmos 00:07: RTC can wake from S4
[ 2.816551] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.816600] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irq s
[ 2.816911] device-mapper: uevent: version 1.0.3
[ 2.817169] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised:
[ 2.817560] cpuidle: using governor ladder
[ 2.817945] cpuidle: using governor menu
[ 2.818164] EFI Variables Facility v0.08 2004-May-17
[ 2.818560] usbcore: registered new interface driver usbhid
[ 2.818565] usbhid: USB HID core driver
[ 2.818732] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.818779] TCP cubic registered
[ 2.818783] Initializing XFRM netlink socket
[ 2.819230] NET: Registered protocol family 10
[ 2.819881] Mobile IPv6
[ 2.819888] NET: Registered protocol family 17
[ 2.819934] Registering the dns_resolver key type
[ 2.819978] Using IPI No-Shortcut mode
[ 2.820350] PM: Hibernation image not present or could not be loaded.
[ 2.820378] registered taskstats version 1
[ 2.822705] IMA: No TPM chip found, activating TPM-bypass!
[ 2.823396] Magic number: 4:15:284
[ 2.823549] rtc_cmos 00:07: setting system clock to 2012-07-24 14:17:34 UTC (1343139454)
[ 2.825898] Initializing network drop monitor service
[ 2.881341] input: AT Translated Set 2 keyboard as /devices/platform/i80 42/serio0/input/input3
[ 3.098694] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.100131] ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA60W, max UDMA/ 100
[ 3.100140] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32 ), AA
[ 3.101749] ata1.00: configured for UDMA/100
[ 3.102694] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 ES 2O PQ: 0 ANSI: 5
[ 3.103669] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB /298 GiB)
[ 3.103686] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.103947] sd 0:0:0:0: [sda] Write Protect is off
[ 3.103955] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.104063] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.109680] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 3.137620] sda: sda1 sda2 sda3 sda4
[ 3.139163] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.318835] usb 1-3: New USB device found, idVendor8f, idProduct= 6387
[ 3.318857] usb 1-3: New USB device strings: Mfr=1, Product=2, Seria lNumber=3
[ 3.318874] usb 1-3: Product: Mass Storage
[ 3.318887] usb 1-3: Manufacturer: Generic
[ 3.318900] usb 1-3: SerialNumber: DEB619B5
[ 3.337456] Refined TSC clocksource calibration: 1596.001 MHz.
[ 3.337480] Switching to clocksource tsc
[ 3.408369] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.409024] Freeing unused kernel memory: 592k freed
[ 3.409892] Write protecting the kernel text: 4192k
[ 3.410162] Write protecting the kernel read-only data: 2036k
[ 3.421354] usb 1-4: new high speed USB device number 3 using ehci_hcd
[ 3.575912] usb 1-4: New USB device found, idVendorf2, idProduct= b2a6
[ 3.575925] usb 1-4: New USB device strings: Mfr=3, Product=1, Seria lNumber=2
[ 3.575936] usb 1-4: Product: HP Webcam-50
[ 3.575943] usb 1-4: Manufacturer: Chicony Electronics Co.,Ltd.
[ 3.575951] usb 1-4: SerialNumber: 0x0001
[ 3.633466] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0x d00173/0x240000/0xa0400
[ 3.672318] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042 /serio1/input/input4
[ 3.681082] usb 1-5: new high speed USB device number 4 using ehci_hcd
[ 3.789069] dracut: dracut-013-18.fc16
[ 3.808768] usb 1-5: New USB device found, idVendor da, idProduct= 0138
[ 3.808800] usb 1-5: New USB device strings: Mfr=1, Product=2, Seria lNumber=3
[ 3.808826] usb 1-5: Product: USB2.0-CRW
[ 3.808846] usb 1-5: Manufacturer: Generic
[ 3.808866] usb 1-5: SerialNumber: 20090516388200000
[ 3.843988] dracut: rd.luks=0: removing cryptoluks activation
[ 3.853738] dracut: root was live:/dev/disk/by-uuid/3EA4-4241, liveroot is now live:UUID>A4-4241
[ 3.897475] udevd[124]: starting version 173
[ 4.053536] dracut: Starting plymouth daemon
[ 4.123693] usb 4-2: new full speed USB device number 2 using uhci_hcd
[ 4.213618] dracut: rd.dm=0: removing DM RAID activation
[ 4.239075] dracut: rd.md=0: removing MD RAID activation
[ 4.286164] usb 4-2: New USB device found, idVendor f3, idProduct= 311d
[ 4.286176] usb 4-2: New USB device strings: Mfr=1, Product=2, Seria lNumber=3
[ 4.286186] usb 4-2: Product: Bluetooth USB Host Controller
[ 4.286194] usb 4-2: Manufacturer: Atheros Communications
[ 4.286201] usb 4-2: SerialNumber: Alaska Day 2006
[ 4.347655] wmi: Mapper loaded
[ 4.424267] Initializing USB Mass Storage driver...
[ 4.426524] scsi4 : usb-storage 1-3:1.0
[ 4.427249] usbcore: registered new interface driver usb-storage
[ 4.427258] USB Mass Storage support registered.
[ 5.429978] scsi 4:0:0:0: Direct-Access Generic Flash Disk 8. 07 PQ: 0 ANSI: 2
[ 5.438196] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 5.439195] sd 4:0:0:0: [sdb] 2009088 512-byte logical blocks: (1.02 GB/ 981 MiB)
[ 5.439910] sd 4:0:0:0: [sdb] Write Protect is off
[ 5.439939] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 5.440641] sd 4:0:0:0: [sdb] No Caching mode page present
[ 5.440666] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5.447464] sd 4:0:0:0: [sdb] No Caching mode page present
[ 5.447493] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5.483837] sdb: sdb1
[ 5.486519] sd 4:0:0:0: [sdb] No Caching mode page present
[ 5.486527] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5.486534] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 6.144922] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 6.830352] EXT4-fs (dm-0): mounted filesystem with ordered data mode. O pts: (null)
[ 6.868543] dracut: Mounted root filesystem /dev/mapper/live-rw
[ 7.094134] dracut: Switching root
[ 7.913412] type04 audit(1343139459.593:2): enforcing=1 old_enfor cing=0 auidB94967295 sesB94967295
[ 8.170894] SELinux: 2048 avtab hash slots, 96028 rules.
[ 8.217863] SELinux: 2048 avtab hash slots, 96028 rules.
[ 8.238166] SELinux: 9 users, 13 roles, 3892 types, 204 bools, 1 sens, 1024 cats
[ 8.238177] SELinux: 82 classes, 96028 rules
[ 8.254152] SELinux: Completing initialization.
[ 8.254162] SELinux: Setting up existing superblocks.
[ 8.254187] SELinux: initialized (dev sysfs, type sysfs), uses genfs_con texts
[ 8.254209] SELinux: initialized (dev rootfs, type rootfs), uses genfs_c ontexts
[ 8.254985] SELinux: initialized (dev bdev, type bdev), uses genfs_conte xts
[ 8.255003] SELinux: initialized (dev proc, type proc), uses genfs_conte xts
[ 8.255026] SELinux: initialized (dev tmpfs, type tmpfs), uses transitio n SIDs
[ 8.255057] SELinux: initialized (dev devtmpfs, type devtmpfs), uses tra nsition SIDs
[ 8.256607] SELinux: initialized (dev sockfs, type sockfs), uses task SI Ds
[ 8.256621] SELinux: initialized (dev debugfs, type debugfs), uses genfs _contexts
[ 8.258736] SELinux: initialized (dev pipefs, type pipefs), uses task SI Ds
[ 8.258758] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 8.258769] SELinux: initialized (dev devpts, type devpts), uses transit ion SIDs
[ 8.258809] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses t ransition SIDs
[ 8.258827] SELinux: initialized (dev mqueue, type mqueue), uses transit ion SIDs
[ 8.258848] SELinux: initialized (dev selinuxfs, type selinuxfs), uses g enfs_contexts
[ 8.258887] SELinux: initialized (dev usbfs, type usbfs), uses genfs_con texts
[ 8.258907] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 8.258921] SELinux: initialized (dev sysfs, type sysfs), uses genfs_con texts
[ 8.259843] SELinux: initialized (dev tmpfs, type tmpfs), uses transitio n SIDs
[ 8.259870] SELinux: initialized (dev tmpfs, type tmpfs), uses transitio n SIDs
[ 8.265472] SELinux: initialized (dev sdb1, type vfat), uses genfs_conte xts
[ 8.265487] SELinux: initialized (dev loop0, type squashfs), not configu red for labeling
[ 8.265497] SELinux: initialized (dev loop2, type squashfs), not configu red for labeling
[ 8.265521] SELinux: initialized (dev dm-0, type ext4), uses xattr
[ 8.271027] type03 audit(1343139459.951:3): policy loaded auidB 94967295 sesB94967295
[ 8.282476] systemd[1]: Successfully loaded SELinux policy in 397ms 555u s.
[ 8.358584] systemd[1]: Successfully loaded SELinux database in 75ms 695 us, size on heap is 362K.
[ 8.396366] SELinux: initialized (dev tmpfs, type tmpfs), uses transitio n SIDs
[ 8.398220] SELinux: initialized (dev cgroup, type cgroup), uses genfs_c ontexts
[ 8.602919] systemd[1]: Relabelled /dev and /run in 204ms 578us.
[ 8.634176] SELinux: initialized (dev cgroup, type cgroup), uses genfs_c ontexts
[ 8.650518] SELinux: initialized (dev cgroup, type cgroup), uses genfs_c ontexts
[ 8.666688] SELinux: initialized (dev cgroup, type cgroup), uses genfs_c ontexts
[ 8.683476] SELinux: initialized (dev cgroup, type cgroup), uses genfs_c ontexts
[ 8.692627] SELinux: initialized (dev cgroup, type cgroup), uses genfs_c ontexts
[ 8.708452] SELinux: initialized (dev cgroup, type cgroup), uses genfs_c ontexts
[ 8.718686] SELinux: initialized (dev cgroup, type cgroup), uses genfs_c ontexts
[ 8.735406] SELinux: initialized (dev cgroup, type cgroup), uses genfs_c ontexts
[ 8.735961] systemd[1]: systemd 36 running in system mode. (+PAM +LIBWRA P +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 8.782913] systemd[1]: Set hostname to [ 9.729954] SELinux: initialized (dev autofs, type autofs), uses genfs_c ontexts
[ 10.188070] SELinux: initialized (dev tmpfs, type tmpfs), uses transitio n SIDs
[ 10.190808] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses t ransition SIDs
[ 10.456203] systemd-fsck[463]: Root directory is writable, skipping chec k.
[ 10.518929] udevd[455]: starting version 173
[ 12.870995] microcode: CPU0 sig=0x30661, pf=0x8, revision=0x109
[ 12.887585] iTCO_vendor_support: vendor-support=0
[ 13.165146] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 13.165420] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x 0460)
[ 13.165807] iTCO_wdt: initialized. heartbeat0 sec (nowayout=0)
[ 13.169384] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.169437] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.169506] r8169 0000:01:00.0: setting latency timer to 64
[ 13.169606] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 13.170137] r8169 0000:01:00.0: eth0: RTL8105e at 0xf812e000, ec:9a:74:6 2:86:c3, XID 00a00000 IRQ 43
[ 13.227378] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 13.407061] microcode: CPU1 sig=0x30661, pf=0x8, revision=0x109
[ 13.412665] microcode: CPU2 sig=0x30661, pf=0x8, revision=0x109
[ 13.417831] microcode: CPU3 sig=0x30661, pf=0x8, revision=0x109
[ 13.425272] microcode: Microcode Update Driver: v2.00 [ 13.433110] cfg80211: Calling CRDA to update world regulatory domain
[ 13.443536] mtp-probe[623]: checking bus 1, device 3: "/sys/devices/pci0 000:00/0000:00:1d.7/usb1/1-4"
[ 13.445230] mtp-probe[619]: checking bus 1, device 4: "/sys/devices/pci0 000:00/0000:00:1d.7/usb1/1-5"
[ 13.447243] mtp-probe[620]: checking bus 1, device 2: "/sys/devices/pci0 000:00/0000:00:1d.7/usb1/1-3"
[ 13.483376] Bluetooth: Core ver 2.16
[ 13.483450] NET: Registered protocol family 31
[ 13.483458] Bluetooth: HCI device and connection manager initialized
[ 13.483467] Bluetooth: HCI socket layer initialized
[ 13.483475] Bluetooth: L2CAP socket layer initialized
[ 13.484428] Bluetooth: SCO socket layer initialized
[ 13.557175] mtp-probe[620]: bus: 1, device: 2 was not an MTP device
[ 13.557210] mtp-probe[619]: bus: 1, device: 4 was not an MTP device
[ 13.557374] mtp-probe[623]: bus: 1, device: 3 was not an MTP device
[ 13.757997] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 13.998789] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 14.286094] Linux media interface: v0.10
[ 14.327518] usbcore: registered new interface driver uas
[ 14.350038] usbcore: registered new interface driver btusb
[ 14.419995] scsi5 : usb-storage 1-5:1.0
[ 14.420611] usbcore: registered new interface driver ums-realtek
[ 14.462895] Linux video capture interface: v2.00
[ 14.562416] uvcvideo: Found UVC 1.00 device HP Webcam-50 (04f2:b2a6)
[ 14.569654] input: HP Webcam-50 as /devices/pci0000:00/0000:00:1d.7/usb1 /1-4/1-4:1.0/input/input6
[ 14.570011] usbcore: registered new interface driver uvcvideo
[ 14.570018] USB Video Class driver (1.1.1)
[ 14.725572] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.725755] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 14.725825] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 14.725922] cfg80211: World regulatory domain updated:
[ 14.725932] cfg80211: (start_freq - end_freq @ bandwidth), (max_ante nna_gain, max_eirp)
[ 14.725943] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.725954] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.725964] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.725974] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.725983] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.764969] udevd[496]: renamed network interface eth0 to em1
[ 14.792248] ALSA sound/pci/hda/patch_sigmatel.c:5656 mute LED gpio 1 pol arity 0
[ 14.792262] ALSA sound/pci/hda/hda_codec.c:4877 autoconfig: line_outs= 1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 14.792271] ALSA sound/pci/hda/hda_codec.c:4881 speaker_outs=0 (0x0 /0x0/0x0/0x0/0x0)
[ 14.792279] ALSA sound/pci/hda/hda_codec.c:4885 hp_outs=1 (0xb/0x0/ 0x0/0x0/0x0)
[ 14.792285] ALSA sound/pci/hda/hda_codec.c:4886 mono: mono_out=0x0
[ 14.792291] ALSA sound/pci/hda/hda_codec.c:4890 inputs:
[ 14.792297] ALSA sound/pci/hda/hda_codec.c:4894 Mic=0xc
[ 14.792302] ALSA sound/pci/hda/hda_codec.c:4896
[ 14.792508] ALSA sound/pci/hda/patch_sigmatel.c:3104 stac92xx: dac_nids =1 (0x13/0x0/0x0/0x0/0x0)
[ 14.794728] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.794759] ath9k 0000:02:00.0: setting latency timer to 64
[ 14.804027] ath: EEPROM regdomain: 0x60
[ 14.804034] ath: EEPROM indicates we should expect a direct regpair map
[ 14.804049] ath: Country alpha2 being used: 00
[ 14.804054] ath: Regpair used: 0x60
[ 14.807056] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:0 0/0000:00:1b.0/sound/card0/input7
[ 14.807590] input: HDA Intel HP Out at Ext Right Jack as /devices/pci000 0:00/0000:00:1b.0/sound/card0/input8
[ 14.830355] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_ control'
[ 14.831364] Registered led device: ath9k-phy0
[ 14.831395] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xf7e00000, irq 
[ 15.423539] scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1. 00 PQ: 0 ANSI: 0 CCS
[ 15.427655] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 15.779328] rmmod[793]: ERROR: Module scsi_wait_scan does not exist in / proc/modules
[ 16.093768] sd 5:0:0:0: [sdc] 3862528 512-byte logical blocks: (1.97 GB/ 1.84 GiB)
[ 16.094741] sd 5:0:0:0: [sdc] Write Protect is on
[ 16.094757] sd 5:0:0:0: [sdc] Mode Sense: 03 00 80 00
[ 16.095702] sd 5:0:0:0: [sdc] No Caching mode page present
[ 16.095713] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 16.100239] sd 5:0:0:0: [sdc] No Caching mode page present
[ 16.100259] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 16.103612] sdc: sdc1 sdc2
[ 16.107714] sd 5:0:0:0: [sdc] No Caching mode page present
[ 16.107735] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 16.107754] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 16.850167] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 17.457843] fedora-storage-init[803]: Setting up Logical Volume Manageme nt: No volume groups found
[ 17.477430] fedora-storage-init[803]: [ OK ]
[ 17.888178] fedora-storage-init[831]: Setting up Logical Volume Manageme nt: No volume groups found
[ 17.914739] fedora-storage-init[831]: [ OK ]
[ 18.251938] lvm[837]: No volume groups found
[ 18.511266] systemd-tmpfiles[842]: Successfully loaded SELinux database in 45ms 431us, size on heap is 363K.
[ 19.252660] bluetoothd[848]: Bluetooth daemon 4.96
[ 19.261418] bluetoothd[848]: bluetoothd[848]: Bluetooth daemon 4.96
[ 19.551332] auditd[856]: Started dispatcher: /sbin/audispd pid: 891
[ 19.655332] auditd[856]: Init complete, auditd 2.1.3 listening for event s (startup state enable)
[ 19.765466] audispd[891]: priority_boost_parser called with: 4
[ 19.765500] audispd[891]: max_restarts_parser called with: 10
[ 19.893278] /usr/sbin/irqbalance[905]: WARNING: MSI interrupts found in /proc/interrupts
[ 19.893315] /usr/sbin/irqbalance[905]: But none found in sysfs, you need to update your kernel
[ 19.893346] /usr/sbin/irqbalance[905]: Until then, IRQs will be improper ly classified
[ 20.239354] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 20.552324] nf_conntrack version 0.5.0 (15867 buckets, 63468 max)
[ 20.841122] SELinux: initialized (dev tmpfs, type tmpfs), uses transitio n SIDs
[ 20.847717] SELinux: initialized (dev tmpfs, type tmpfs), uses transitio n SIDs
[ 20.853047] SELinux: initialized (dev tmpfs, type tmpfs), uses transitio n SIDs
[ 22.864352] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.864366] Bluetooth: BNEP filters: protocol multicast
[ 23.049602] Bluetooth: RFCOMM TTY layer initialized
[ 23.049621] Bluetooth: RFCOMM socket layer initialized
[ 23.049628] Bluetooth: RFCOMM ver 1.11
[ 24.619413] r8169 0000:01:00.0: em1: link down
[ 24.619430] r8169 0000:01:00.0: em1: link down
[ 24.620144] ADDRCONF(NETDEV_UP): em1: link is not ready
[ 24.694960] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.882513] 8021q: 802.1Q VLAN Support v1.8
[ 26.271465] r8169 0000:01:00.0: em1: link up
[ 26.272225] ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
[ 36.324296] em1: no IPv6 routers present
[ 38.606272] fuse init (API version 7.17)
[ 38.634605] SELinux: initialized (dev fusectl, type fusectl), uses genfs _contexts
[ 38.640229] SELinux: initialized (dev fuse, type fuse), uses genfs_conte xts
[ 52.843449] lp: driver loaded but no devices fo
Sergio
Le #24655061
Le Tue, 24 Jul 2012 12:31:42 +0000, Nicolas George a écrit :

Sergio , dans le message écrit :
une augmentation de ram au-delà de 2 Go, 2 Go étant le maximum géré en
32 bits.


4 Go !



Ça devient lourd, arrêtez de dire n'importe quoi quand vous ne savez
pas.



Oui mais moi, je sais...

Linux (ou Windows ou tout autre système normal) 32 bits : 4Go sauf si
noyau (et processeur/chipset afférent) gérant le PAE.

Voir : http://fr.wikipedia.org/wiki/Extension_d%27adresse_physique

Il peut y avoir des systèmes ne supportant pas plus de 2Go (voire
moins...) à cause de limitations dues au chipset, à la carte mère (pas
assez d'emplacements RAM...)...
Publicité
Poster une réponse
Anonyme