Je possède ce modem avec wifi tout en un et il fonctionne top mais à
l'étranger.
Mais en regardant ces spécifications quelqu'un peut-il me dire s'il est
compatible avec la ou les normes des FAI français ?
La marque est "Prolink" et il est fabriqué en asie.
Sur la doc mode d'emploi, les canaux wifi utilisés en France, moins nombreux
que dans le reste de l'europe sont référencés.
Ce qui pourrait laisser supposer que sont fonctionnement est possible.
Merci de vos lumières
Michel
The Hurricane 9000W is a 802.11b Wireless ADSL Router with 4-port
10/100 switch . It provides Full rate (ANSI and G.DMT) as well as G.lite
ADSL standards line support, and can be connected to PC through Ethernet or
via IEEE802.11b WLAN technology. It comes with full feature routing,
forwarding , DMZ , MAC address Filtering and WEP function, easy to setup via
web-based management. It's targeted at the SOHO for multi-user sharing of
ADSL broadband via wireless and wired connectivity, bring ADSL and Wireless
into corporate or home LAN and WAN.
1.2 Features Summary
ADSL Compliance
Compliant with ADSL standards: ANSI T1.413 Issue 2, ITU G.dmt
(G.992.1) and G.lite (G.992.2).
ADSL over POTS (Annex A) and ADSL over ISDN (Annex B)
DMT modulation and demodulation
Full-rate adaptive modem
Maximum downstream rate of 8 Mbps
Maximum upstream rate of 1 Mbps
Tone detection for low power mode
Supports splitterless ADSL implementation
Supports Dying Gasp
ATM Protocols
WAN mode support: PPP over ATM and over Ethernet. (RFC 2364/2516)
LAN mode support: bridged/routed Ethernet over ATM (RFC 1483) and
Classical IP over ATM (RFC 1577)
ATM Forum UNI 3.1/4.0 PVC
Up to 8 VCs (Virtual Circuits)
ATM SAR (Segmentation and Reassembly)
ATM AAL5 (Adaption Layer type 5)
OAM F4/F5
Bridge Mode
Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses·
Router Mode
IP routing/ RIPv2/ Static routing
DHCP (Dynamic Host Configuration Protocol) Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
Simultaneous USB and Ethernet operation·
Security
User authentication for PPP
PAP (Password Authentication Protocol)
CHAP (Challenge Authentication Protocol)
Password protected system management
Ethernet interface
Compliant with IEEE 802.3 standard
10/100 Mbps auto selection
4 x LAN ports (MDI/MDIX Auto-Sensing)
USB host interface
Compliant with USB Specification, Revision 1.1
USB full speed (12 Mbps)
Vendor specific descriptors
HTTP Web-based management
Firmware upgrade
WAN and LAN side connection statistics
Configuration of static routes and Routing table
Configuration of NAT/NAPT/DMZ
VPN pass-through
Port Forwarding
PPP Auto Reconnect for Idle Timeout/PPP on Demand
Password protected access
PPP user ID and password
IGMP Multicast support
Wireless
Fully compatible with IEEE 802.11b standard and supports a high data
rate up to 11Mbps.
Interoperable with IEEE 802.11b (DSSS) 2.4GHz-Compliant equipment
"Michel" a écrit dans le message de news:4017ea9a$0$26042$
Je possède ce modem avec wifi tout en un et il fonctionne top mais à l'étranger. Mais en regardant ces spécifications quelqu'un peut-il me dire s'il est compatible avec la ou les normes des FAI français ? La marque est "Prolink" et il est fabriqué en asie. Sur la doc mode d'emploi, les canaux wifi utilisés en France, moins nombreux
que dans le reste de l'europe sont référencés. Ce qui pourrait laisser supposer que sont fonctionnement est possible.
Merci de vos lumières
Michel
The Hurricane 9000W is a 802.11b Wireless ADSL Router with 4-port 10/100 switch . It provides Full rate (ANSI and G.DMT) as well as G.lite ADSL standards line support, and can be connected to PC through Ethernet or
via IEEE802.11b WLAN technology. It comes with full feature routing, forwarding , DMZ , MAC address Filtering and WEP function, easy to setup via
web-based management. It's targeted at the SOHO for multi-user sharing of ADSL broadband via wireless and wired connectivity, bring ADSL and Wireless
into corporate or home LAN and WAN.
1.2 Features Summary
ADSL Compliance
Compliant with ADSL standards: ANSI T1.413 Issue 2, ITU G.dmt (G.992.1) and G.lite (G.992.2).
ADSL over POTS (Annex A) and ADSL over ISDN (Annex B)
DMT modulation and demodulation
Full-rate adaptive modem
Maximum downstream rate of 8 Mbps
Maximum upstream rate of 1 Mbps
Tone detection for low power mode
Supports splitterless ADSL implementation
Supports Dying Gasp
ATM Protocols
WAN mode support: PPP over ATM and over Ethernet. (RFC 2364/2516)
LAN mode support: bridged/routed Ethernet over ATM (RFC 1483) and Classical IP over ATM (RFC 1577)
ATM Forum UNI 3.1/4.0 PVC
Up to 8 VCs (Virtual Circuits)
ATM SAR (Segmentation and Reassembly)
ATM AAL5 (Adaption Layer type 5)
OAM F4/F5
Bridge Mode
Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses·
Router Mode
IP routing/ RIPv2/ Static routing
DHCP (Dynamic Host Configuration Protocol) Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
Simultaneous USB and Ethernet operation·
Security
User authentication for PPP
PAP (Password Authentication Protocol)
CHAP (Challenge Authentication Protocol)
Password protected system management
Ethernet interface
Compliant with IEEE 802.3 standard
10/100 Mbps auto selection
4 x LAN ports (MDI/MDIX Auto-Sensing)
USB host interface
Compliant with USB Specification, Revision 1.1
USB full speed (12 Mbps)
Vendor specific descriptors
HTTP Web-based management
Firmware upgrade
WAN and LAN side connection statistics
Configuration of static routes and Routing table
Configuration of NAT/NAPT/DMZ
VPN pass-through
Port Forwarding
PPP Auto Reconnect for Idle Timeout/PPP on Demand
Password protected access
PPP user ID and password
IGMP Multicast support
Wireless
Fully compatible with IEEE 802.11b standard and supports a high data rate up to 11Mbps.
Interoperable with IEEE 802.11b (DSSS) 2.4GHz-Compliant equipment
Capable of up to 128-bit WEP encryption
Support up to 14 Operation Channels
Support up to 32 wireless users.
Bonsoir,
A priori cela devrait fonctionner.
- pour la partie modem/routeur, j'ai comparé avec le mien (Olitec SX200 - existe en versio WiFi SX200 et 500) et les caractéristiques, protocoles etc sont identiques.
- pour la partie WiFi, les normes 802.11b et g sont supportées en France sans modification (ce n'est pas le cas de la 802.11a, à ma connaissance). Au bureau on a un réseau WiFi Cisco qui marche très bien, et les routeurs et cartes PC sont les mêmes que celles vendues aux US ou ailleurs. Donc pas de souci à avoir à mon avis.
"Michel" <michel.dx@aon.at> a écrit dans le message de
news:4017ea9a$0$26042$91cee783@newsreader01.highway.telekom.at...
Je possède ce modem avec wifi tout en un et il fonctionne top mais à
l'étranger.
Mais en regardant ces spécifications quelqu'un peut-il me dire s'il est
compatible avec la ou les normes des FAI français ?
La marque est "Prolink" et il est fabriqué en asie.
Sur la doc mode d'emploi, les canaux wifi utilisés en France, moins
nombreux
que dans le reste de l'europe sont référencés.
Ce qui pourrait laisser supposer que sont fonctionnement est possible.
Merci de vos lumières
Michel
The Hurricane 9000W is a 802.11b Wireless ADSL Router with 4-port
10/100 switch . It provides Full rate (ANSI and G.DMT) as well as G.lite
ADSL standards line support, and can be connected to PC through Ethernet
or
via IEEE802.11b WLAN technology. It comes with full feature routing,
forwarding , DMZ , MAC address Filtering and WEP function, easy to setup
via
web-based management. It's targeted at the SOHO for multi-user sharing of
ADSL broadband via wireless and wired connectivity, bring ADSL and
Wireless
into corporate or home LAN and WAN.
1.2 Features Summary
ADSL Compliance
Compliant with ADSL standards: ANSI T1.413 Issue 2, ITU G.dmt
(G.992.1) and G.lite (G.992.2).
ADSL over POTS (Annex A) and ADSL over ISDN (Annex B)
DMT modulation and demodulation
Full-rate adaptive modem
Maximum downstream rate of 8 Mbps
Maximum upstream rate of 1 Mbps
Tone detection for low power mode
Supports splitterless ADSL implementation
Supports Dying Gasp
ATM Protocols
WAN mode support: PPP over ATM and over Ethernet. (RFC 2364/2516)
LAN mode support: bridged/routed Ethernet over ATM (RFC 1483) and
Classical IP over ATM (RFC 1577)
ATM Forum UNI 3.1/4.0 PVC
Up to 8 VCs (Virtual Circuits)
ATM SAR (Segmentation and Reassembly)
ATM AAL5 (Adaption Layer type 5)
OAM F4/F5
Bridge Mode
Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses·
Router Mode
IP routing/ RIPv2/ Static routing
DHCP (Dynamic Host Configuration Protocol) Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
Simultaneous USB and Ethernet operation·
Security
User authentication for PPP
PAP (Password Authentication Protocol)
CHAP (Challenge Authentication Protocol)
Password protected system management
Ethernet interface
Compliant with IEEE 802.3 standard
10/100 Mbps auto selection
4 x LAN ports (MDI/MDIX Auto-Sensing)
USB host interface
Compliant with USB Specification, Revision 1.1
USB full speed (12 Mbps)
Vendor specific descriptors
HTTP Web-based management
Firmware upgrade
WAN and LAN side connection statistics
Configuration of static routes and Routing table
Configuration of NAT/NAPT/DMZ
VPN pass-through
Port Forwarding
PPP Auto Reconnect for Idle Timeout/PPP on Demand
Password protected access
PPP user ID and password
IGMP Multicast support
Wireless
Fully compatible with IEEE 802.11b standard and supports a high data
rate up to 11Mbps.
Interoperable with IEEE 802.11b (DSSS) 2.4GHz-Compliant equipment
Capable of up to 128-bit WEP encryption
Support up to 14 Operation Channels
Support up to 32 wireless users.
Bonsoir,
A priori cela devrait fonctionner.
- pour la partie modem/routeur, j'ai comparé avec le mien (Olitec SX200 -
existe en versio WiFi SX200 et 500) et les caractéristiques, protocoles etc
sont identiques.
- pour la partie WiFi, les normes 802.11b et g sont supportées en France
sans modification (ce n'est pas le cas de la 802.11a, à ma connaissance). Au
bureau on a un réseau WiFi Cisco qui marche très bien, et les routeurs et
cartes PC sont les mêmes que celles vendues aux US ou ailleurs. Donc pas de
souci à avoir à mon avis.
"Michel" a écrit dans le message de news:4017ea9a$0$26042$
Je possède ce modem avec wifi tout en un et il fonctionne top mais à l'étranger. Mais en regardant ces spécifications quelqu'un peut-il me dire s'il est compatible avec la ou les normes des FAI français ? La marque est "Prolink" et il est fabriqué en asie. Sur la doc mode d'emploi, les canaux wifi utilisés en France, moins nombreux
que dans le reste de l'europe sont référencés. Ce qui pourrait laisser supposer que sont fonctionnement est possible.
Merci de vos lumières
Michel
The Hurricane 9000W is a 802.11b Wireless ADSL Router with 4-port 10/100 switch . It provides Full rate (ANSI and G.DMT) as well as G.lite ADSL standards line support, and can be connected to PC through Ethernet or
via IEEE802.11b WLAN technology. It comes with full feature routing, forwarding , DMZ , MAC address Filtering and WEP function, easy to setup via
web-based management. It's targeted at the SOHO for multi-user sharing of ADSL broadband via wireless and wired connectivity, bring ADSL and Wireless
into corporate or home LAN and WAN.
1.2 Features Summary
ADSL Compliance
Compliant with ADSL standards: ANSI T1.413 Issue 2, ITU G.dmt (G.992.1) and G.lite (G.992.2).
ADSL over POTS (Annex A) and ADSL over ISDN (Annex B)
DMT modulation and demodulation
Full-rate adaptive modem
Maximum downstream rate of 8 Mbps
Maximum upstream rate of 1 Mbps
Tone detection for low power mode
Supports splitterless ADSL implementation
Supports Dying Gasp
ATM Protocols
WAN mode support: PPP over ATM and over Ethernet. (RFC 2364/2516)
LAN mode support: bridged/routed Ethernet over ATM (RFC 1483) and Classical IP over ATM (RFC 1577)
ATM Forum UNI 3.1/4.0 PVC
Up to 8 VCs (Virtual Circuits)
ATM SAR (Segmentation and Reassembly)
ATM AAL5 (Adaption Layer type 5)
OAM F4/F5
Bridge Mode
Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses·
Router Mode
IP routing/ RIPv2/ Static routing
DHCP (Dynamic Host Configuration Protocol) Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
Simultaneous USB and Ethernet operation·
Security
User authentication for PPP
PAP (Password Authentication Protocol)
CHAP (Challenge Authentication Protocol)
Password protected system management
Ethernet interface
Compliant with IEEE 802.3 standard
10/100 Mbps auto selection
4 x LAN ports (MDI/MDIX Auto-Sensing)
USB host interface
Compliant with USB Specification, Revision 1.1
USB full speed (12 Mbps)
Vendor specific descriptors
HTTP Web-based management
Firmware upgrade
WAN and LAN side connection statistics
Configuration of static routes and Routing table
Configuration of NAT/NAPT/DMZ
VPN pass-through
Port Forwarding
PPP Auto Reconnect for Idle Timeout/PPP on Demand
Password protected access
PPP user ID and password
IGMP Multicast support
Wireless
Fully compatible with IEEE 802.11b standard and supports a high data rate up to 11Mbps.
Interoperable with IEEE 802.11b (DSSS) 2.4GHz-Compliant equipment
Capable of up to 128-bit WEP encryption
Support up to 14 Operation Channels
Support up to 32 wireless users.
Bonsoir,
A priori cela devrait fonctionner.
- pour la partie modem/routeur, j'ai comparé avec le mien (Olitec SX200 - existe en versio WiFi SX200 et 500) et les caractéristiques, protocoles etc sont identiques.
- pour la partie WiFi, les normes 802.11b et g sont supportées en France sans modification (ce n'est pas le cas de la 802.11a, à ma connaissance). Au bureau on a un réseau WiFi Cisco qui marche très bien, et les routeurs et cartes PC sont les mêmes que celles vendues aux US ou ailleurs. Donc pas de souci à avoir à mon avis.
Michel
Bonsoir,
A priori cela devrait fonctionner.
- pour la partie modem/routeur, j'ai comparé avec le mien (Olitec SX200 - existe en versio WiFi SX200 et 500) et les caractéristiques, protocoles etc
sont identiques.
- pour la partie WiFi, les normes 802.11b et g sont supportées en France sans modification (ce n'est pas le cas de la 802.11a, à ma connaissance). Au
bureau on a un réseau WiFi Cisco qui marche très bien, et les routeurs et cartes PC sont les mêmes que celles vendues aux US ou ailleurs. Donc pas de
souci à avoir à mon avis.
Merci de ta réponse rapide
Comme je vais assez souvent dans la zone Asie, l'idée était d'en acheter un deuxième et de le ramener comme l'engin n'est vraiment pas cher.
Mais je vais tout de même aller voir sur le site Olitec histoire de comparer.
Michel
Bonsoir,
A priori cela devrait fonctionner.
- pour la partie modem/routeur, j'ai comparé avec le mien (Olitec SX200 -
existe en versio WiFi SX200 et 500) et les caractéristiques, protocoles
etc
sont identiques.
- pour la partie WiFi, les normes 802.11b et g sont supportées en France
sans modification (ce n'est pas le cas de la 802.11a, à ma connaissance).
Au
bureau on a un réseau WiFi Cisco qui marche très bien, et les routeurs et
cartes PC sont les mêmes que celles vendues aux US ou ailleurs. Donc pas
de
souci à avoir à mon avis.
Merci de ta réponse rapide
Comme je vais assez souvent dans la zone Asie, l'idée était d'en acheter un
deuxième et de le ramener comme l'engin n'est vraiment pas cher.
Mais je vais tout de même aller voir sur le site Olitec histoire de
comparer.