Logo GNT
Actualités Tests & Guides Bons Plans
Twitter iPhone pliant OnePlus 11 PS5 Disney+ Orange Livebox Windows 11
Entraide Linux Autres OS Linux Mandrake Configurer 3 écrans et 2 cartes video

Configurer 3 écrans et 2 cartes video

7 réponses
Avatar
news free
Nouveau sous Linux, j'essaye sans succès de configurer mes trois écrans et
mes deux cartes video :

Gforce4200ti avec un écran CRT Philips 107P5 (fonctionne) + 1 LCD Philps
150S (Affichage brouillé)
S3 Savage4 aevec écran CRT 17" générique (Proview) Noir complet.

Mes différentes tentatives de modification de ce fichier m'ont conduit à
des catastrophes qui vu mon faible niveau (linux installé depuis 3 jours)
m'ont contraint à tout reinstaller.

Si quelqu'un peut me conseiller c'est vraiment pas de refus

Mon fichier Xorg.conf actuel :

# File generated by XFdrake (rev 57713)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# font server independent of the X server to render fonts.
FontPath "unix/:-1"

# minimal fonts to allow X to run without xfs
FontPath "/usr/share/fonts/misc:unscaled"
EndSection

Section "Extensions"
Option "Composite"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse
does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "PHILIPS 107P5"
HorizSync 30-97
VertRefresh 50-160

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce4 (generic)"
Driver "nv"
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection


--
Utilisant le client e-mail révolutionnaire d'Opera :
http://www.opera.com/mail/
Signaler un problème avec ce contenu

7 réponses

Supprimer
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire

Veuillez sélectionner un problème

Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
Avatar
sansflotusspam
news free a commis :


Nouveau sous Linux, j'essaye sans succès de configurer mes trois
écrans et mes deux cartes video :

Gforce4200ti avec un écran CRT Philips 107P5 (fonctionne) + 1 LCD
Philps 150S (Affichage brouillé)
S3 Savage4 aevec écran CRT 17" générique (Proview) Noir complet.

Mes différentes tentatives de modification de ce fichier m'ont conduit
à des catastrophes qui vu mon faible niveau (linux installé depuis 3
jours) m'ont contraint à tout reinstaller.

Si quelqu'un peut me conseiller c'est vraiment pas de refus

Mon fichier Xorg.conf actuel :

# File generated by XFdrake (rev 57713)

#


**********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
#


**********************************************************************

Section "Files"
# font server independent of the X server to render fonts.
FontPath "unix/:-1"

# minimal fonts to allow X to run without xfs
FontPath "/usr/share/fonts/misc:unscaled"
EndSection

Section "Extensions"
Option "Composite"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the
mouse
does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution
#switching)
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "PHILIPS 107P5"
HorizSync 30-97
VertRefresh 50-160

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595
630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590
616
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce4 (generic)"
Driver "nv"
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection





Normal .... que ça ne marche pas !

il faut une section "Monitor" par moniteur (écran), soit 3 puisqu'il y a
3 écrans raccordés,
il faut une section "Device" par écran raccordé, soit 3, en tenant
compte de chaque liaison :
en général, les moniteurs cathodiques sont reliés en vga et les lcd en
dvi,
il faut autant de sections "Screen" correspondant aux liens Monitor(x)
<--> Device(y)
et les directives situant la distribution des affichages (Xinerama on ou
off, moniteur X à droite ou à gauche de moniteur Y, etc.)

tout cela est très bien expliqué sur les sites d'aide comme lea-linux,
delafond, guide du routard, etc
tu peux aussi regarder les archives avec google, et le tuto sur le site
de Nvidia pour la Geforce.
vas voir aussi un fil auquel j'ai participé récemment sur
fr.comp.os.linux.configuration.

un détail : il est possible que la carte S3 Savage4 pose qques menues
difficultés sous Xorg ... donc, voir la doc de Xorg
Avatar
news.free.fr
"sansflotusspam" a écrit dans le message
news:<465d2057$0$1043$...

Normal .... que ça ne marche pas !







il faut une section "Monitor" par moniteur (écran), soit 3 puisqu'il y a



3 écrans raccordés,



il faut une section "Device" par écran raccordé, soit 3, en tenant



compte de chaque liaison :



en général, les moniteurs cathodiques sont reliés en vga et les lcd en



dvi,



il faut autant de sections "Screen" correspondant aux liens Monitor(x)



<--> Device(y)



et les directives situant la distribution des affichages (Xinerama on ou



off, moniteur X à droite ou à gauche de moniteur Y, etc.)







tout cela est très bien expliqué sur les sites d'aide comme lea-linux,



delafond, guide du routard, etc



tu peux aussi regarder les archives avec google, et le tuto sur le site



de Nvidia pour la Geforce.



vas voir aussi un fil auquel j'ai participé récemment sur



fr.comp.os.linux.configuration.







un détail : il est possible que la carte S3 Savage4 pose qques menues



difficultés sous Xorg ... donc, voir la doc de Xorg











J'ai mis le fichier d'origine... Tout mes essais avec monitor1 & 2 et device
1 & 2 ayant échoué. La lecture des differentes docs ne m'ayant pas vraiment
renseigné, en gros j'y pige rien !

Si ça continue je vais virer tout ça et retourner sous windows

j'ai qu'un écran qui marche sur 3

Je n'ai pas de son

Auqune de mes imprimantes ne fonctionne (1 en reseau, 1 en local)

Mon palm n'est pas reconnu

Ma webcam est ivisible

Ma tablette grapique non plus

Ma souris n'a plus que 3 boutons

Mon apprereil photo et mon camescope ne sont pas vu

Y'a guerre qu'internet et le voisinage réseau que j'ai réussi à faire
fonctionner correctement.

Tout ça ne donne pas vraiment envie de passer au libre...
Avatar
news free
J'ai un peu progréssé, maintenant j'ai deux écrans sur trois qui
fonctionne mais l'écran principal se trouve sur la S3 alors que je
voudrais qu'il soit sur le 17" branché sur la gforce4

en gros:

LCD philips 150s sur gforce4 CRT Philips 107P sur gforce4 CRT Proview
17" sur S3

mon fichier xorg.conf :

# File generated by XFdrake (rev 57713)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# font server independent of the X server to render fonts.
FontPath "unix/:-1"

# minimal fonts to allow X to run without xfs
FontPath "/usr/share/fonts/misc:unscaled"
EndSection

Section "Extensions"
Option "Composite"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse
does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "PHILIPS 107P5"
HorizSync 30-97
VertRefresh 50-160

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor2"

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "S3 Inc."
BoardName "S3 Savage4"
Driver "savage"
VideoRam 4096
Screen 0
BusID "PCI:0:9:0"
Option "DPMS"

# Option "no_accel" # You may enable this if there are timeouts when
starting X
EndSection

Section "Device"
Identifier "device2"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce4 (generic)"
Driver "nv"
Screen 0
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection

Section "Screen"
Identifier "screen2"
Device "device2"
Monitor "monitor2"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
Screen "screen2" RightOf "screen1"
Option "Xinerama"
EndSection
Avatar
news free
Ca commence à marchouiller, mon écran principal est bien le philps107P,
celui de droite fonctione (c'est celui qui est sur la S3) mais celui de
gauche (le lcd philips 150S) reste brouillé...

Une idée ?


# File generated by XFdrake (rev 57713)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# font server independent of the X server to render fonts.
FontPath "unix/:-1"

# minimal fonts to allow X to run without xfs
FontPath "/usr/share/fonts/misc:unscaled"
EndSection

Section "Extensions"
Option "Composite"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse
does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "PHILIPS 107P5"
HorizSync 30-97
VertRefresh 50-160

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor2"
VendorName "Plug'n Play"
ModelName "PHILIPS 150S"
HorizSync 30-97
VertRefresh 50-160

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor3"
VendorName "Plug'n Play"
ModelName "Proview 17"
HorizSync 30-97
VertRefresh 50-160

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce4 (generic)"
Driver "nv"
Screen 0
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Device"
Identifier "device2"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce4 (generic)"
Driver "nv"
Screen 0
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Device"
Identifier "device3"
VendorName "S3 Inc."
BoardName "S3 Savage4"
Driver "savage"
VideoRam 4096
Screen 0
BusID "PCI:0:9:0"
Option "DPMS"

# Option "no_accel" # You may enable this if there are timeouts when
starting X
EndSection



Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection

Section "Screen"
Identifier "screen2"
Device "device2"
Monitor "monitor2"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection

Section "Screen"
Identifier "screen3"
Device "device3"
Monitor "monitor3"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
Screen "screen2" RightOf "screen1"
Screen "screen3" LeftOf "screen1"
Option "Xinerama"
EndSection
Avatar
sansflotusspam
news free a commis :

J'ai un peu progréssé, maintenant j'ai deux écrans sur trois qui
fonctionne mais l'écran principal se trouve sur la S3 alors que je
voudrais qu'il soit sur le 17" branché sur la gforce4

en gros:

LCD philips 150s sur gforce4 CRT Philips 107P sur gforce4 CRT
Proview 17" sur S3

mon fichier xorg.conf :

# File generated by XFdrake (rev 57713)

#


**********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
#


**********************************************************************

Section "Files"
# font server independent of the X server to render fonts.
FontPath "unix/:-1"

# minimal fonts to allow X to run without xfs
FontPath "/usr/share/fonts/misc:unscaled"
EndSection

Section "Extensions"
Option "Composite"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the
mouse
does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution
#switching)
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "PHILIPS 107P5"
HorizSync 30-97
VertRefresh 50-160

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595
630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590
616
EndSection

Section "Monitor"
Identifier "monitor2"

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595
630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590
616
EndSection

Section "Device"
Identifier "device1"
VendorName "S3 Inc."
BoardName "S3 Savage4"
Driver "savage"
VideoRam 4096
Screen 0
BusID "PCI:0:9:0"
Option "DPMS"

# Option "no_accel" # You may enable this if there are timeouts
# when
starting X
EndSection

Section "Device"
Identifier "device2"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce4 (generic)"
Driver "nv"
Screen 0
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection
EndSection

Section "Screen"
Identifier "screen2"
Device "device2"
Monitor "monitor2"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360"
"320x240"
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
Screen "screen2" RightOf "screen1"
Option "Xinerama"
EndSection



il faut utiliser le driver Nvidia (module nvidia), à cherger sur le site
de Nvidia !
Avatar
news free
Le Fri, 01 Jun 2007 12:04:54 +0200, sansflotusspam
a écrit:


il faut utiliser le driver Nvidia (module nvidia), à cherger sur le site
de Nvidia !





C'est fait, mais à part un joli logo au démarage ça ne change pas grand
chose, le troisième écran est toujours noir et je n'ai toujours pas de 3D

Mon fichier xorg.conf du jour :

# File generated by XFdrake (rev 57713)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# font server independent of the X server to render fonts.
FontPath "unix/:-1"

# minimal fonts to allow X to run without xfs
FontPath "/usr/share/fonts/misc:unscaled"
EndSection

Section "Extensions"
Option "Composite"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse
does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "PHILIPS 107P5"
HorizSync 30-97
VertRefresh 50-160

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor2"
VendorName "Philips"
ModelName "Philips 150S"
HorizSync 30-61
VertRefresh 56-75

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Monitor"
Identifier "monitor3"
VendorName "Plug'n Play"
HorizSync 30-61
VertRefresh 56-75

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce4 (generic)"
Driver "nvidia"
Screen 0
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Device"
Identifier "device2"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce4 (generic)"
Driver "nvidia"
Screen 0
BusID "PCI:1:0:0"
Option "DPMS"
EndSection

Section "Device"
Identifier "device3"
VendorName "S3 Inc."
BoardName "S3 Savage4"
Driver "savage"
VideoRam 4096
Screen 0
BusID "PCI:0:9:0"
Option "DPMS"
# Option "no_accel" # You may enable this if there are timeouts when
starting X
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection

Section "Screen"
Identifier "screen2"
Device "device2"
Monitor "monitor2"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection

Section "Screen"
Identifier "screen3"
Device "device3"
Monitor "monitor3"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
Screen "screen2" RightOf "screen1"
Screen "screen3" LeftOf "screen1"
Option "Xinerama"
EndSection
Avatar
sansflotusspam
news free a commis :

Le Fri, 01 Jun 2007 12:04:54 +0200, sansflotusspam
a écrit:


il faut utiliser le driver Nvidia (module nvidia), à cherger sur le
site de Nvidia !





C'est fait, mais à part un joli logo au démarage ça ne change pas
grand chose, le troisième écran est toujours noir et je n'ai toujours
pas de 3D

Mon fichier xorg.conf du jour :

# File generated by XFdrake (rev 57713)



si tu as le logo Nvidia au démarrage de X, c'est que X tourne ...

les écrans plats n'ont qu'une fréquence verticale, 60 Hz (VertRefresh)

ci-dessous mon xorg.conf, qui fait tourner un écran plat Sony (en dvi)
et un crt 19" (en vga) à gauche du plat, sur une 6600 GT ; il te suffit
de recopier en ajoutant le 3° écran sur la 2° carte.

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"
ModulePath "/usr/X11R6/lib/modules"

# The module search path. The default path is shown here.
RgbPath "/usr/X11R6/lib/X11/rgb"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is
normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated
together),
# as well as specifying multiple comma-separated entries in one
FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "unix/:-1"
EndSection

Section "Module"
# This loads the font modules
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
Load "speedo"
Load "xtt"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)

# allows the server to start up even if the mouse does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
Option "allowmouseopenfail"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "DFP-0"
VendorName "SONY"
ModelName "LCD Panel 1920x1200"
HorizSync 28.0 - 75.0
VertRefresh 60
Option "dpms"
EndSection

Section "Monitor"
Identifier "CRT-1"
VendorName "SAMPO"
ModelName "AlphaScan811"
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 150.0
Option "dpms"
EndSection

Section "Device"
Identifier "NVIDIA0"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce 6600 GT"
Driver "nvidia"
Screen 0
BusID "PCI:01:00:0"
Option "TwinView" "on"
EndSection

Section "Device"
Identifier "NVIDIA1"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce 6600 GT"
Driver "nvidia"
Screen 1
BusID "PCI:01:00:0"
Option "TwinView" "on"
EndSection

Section "Screen"
Identifier "DFP-0"
Device "NVIDIA0"
Monitor "DFP-0"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1920x1200" "1680x1050" "1600x1200" "1600x1000" "1440x900"
"1280x1024" "1280x800" "1024x768" "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 15
Modes "1920x1200" "1680x1050" "1600x1200" "1600x1000" "1440x900"
"1280x1024" "1280x800" "1024x768" "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 16
Modes "1920x1200" "1680x1050" "1600x1200" "1600x1000" "1440x900"
"1280x1024" "1280x800" "1024x768" "800x600" "640x480"
EndSubsection

Subsection "Display"
Depth 24
Modes "1920x1200" "1680x1050" "1600x1200" "1600x1000" "1440x900"
"1280x1024" "1280x800" "1024x768" "800x600" "640x480"
EndSubsection
Option "UseDisplayDevice" "DFP-0"
Option "DPMS"
EndSection

Section "Screen"
Identifier "CRT-1"
Device "NVIDIA1"
Monitor "CRT-1"
DefaultDepth 24

Subsection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Option "UseDisplayDevice" "CRT-1"
Option "DPMS"
Option "TwinViewOrientation" "LeftOf"
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen 0 "DFP-0"# 0 0
Screen 1 "CRT-1" LeftOf "DFP-0"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection