DVD gravé en joliet (M$)

Le
Jules ALIX
slt,

j'ai gravé un dvd en udftout va bien il se monte et je peux le =
lire.
j'ai gravé un dvd en jolietil se monte à priorimais pas moyen
de lire le contenu.

j'ai essayé les chmod 777, liens symboliques, création de =
répertoire
dans /mnt ou /dev pas moyen de lire le contenu

quelqu'un a une idée ? version du noyau 2.6.30

Jules ALIX
Vidéos High-Tech et Jeu Vidéo
Téléchargements
Vos réponses
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
Doug713705
Le #20634061
Le Wed, 25 Nov 2009 22:50:20 +0100, Jules ALIX a gâché de la bande
passante pour nous écrire :

j'ai gravé un dvd en udf...tout va bien il se monte et je peux le lire.
j'ai gravé un dvd en joliet...il se monte à priori...mais pas moyen de
lire le contenu.




Avec quelle commande/outil tente tu de monter le DVD ?
Que dit dmesg après la tentative de montage ?

--
@+
Doug - Linux user #307925 - Slackware64 roulaize ;-)
[ Plus ou moins avec une chance de peut-être ]
Jules ALIX
Le #20634421
il me dit tout ça après montage du dit DVD

---

ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages at c2810000, static data 30980 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778977
Kernel command line: auto BOOT_IMAGE=zenwalk1 ro root€5 resume=/dev/sda7 splash=silent
bootsplash: silent mode.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
NR_IRQS:384
CPU 0 irqstacks, hardÂ810000 softÂ811000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2161.711 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:000bfe00)
Memory: 3109388k/3143680k available (2853k kernel code, 30228k reserved, 1020k data, 312k init, 2231556k highmem)
virtual kernel memory layout:
fixmap : 0xfff82000 - 0xfffff000 ( 500 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc04ce000 - 0xc051c000 ( 312 kB)
.data : 0xc03c973b - 0xc04c8870 (1020 kB)
.text : 0xc0100000 - 0xc03c973b (2853 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs, HWalignd, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4323.42 BogoMIPS (lpj!61711)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz stepping 0d
CPU 1 irqstacks, hardÂ820000 softÂ821000
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4322.28 BogoMIPS (lpj!61140)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (8645.70 BogoMIPS).
net_namespace: 504 bytes
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 7916.000 MB/sec
xor: using function: pIII_sse (7916.000 MB/sec)
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0504800-0xf0504bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0504c00-0xf0504fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7]
pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7]
pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef]
pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3]
pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0504000-0xf05047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:06:00.0: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:06:00.2: reg 10 32bit mmio: [0xf0300400-0xf03004ff]
pci 0000:06:00.3: reg 10 32bit mmio: [0xf0300800-0xf03008ff]
pci 0000:06:00.4: reg 10 32bit mmio: [0xf0300c00-0xf0300cff]
pci 0000:00:1c.2: bridge io port: [0x00-0xfff]
pci 0000:00:1c.2: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:07:00.0: reg 10 64bit mmio: [0x000000-0x00ffff]
pci 0000:07:00.0: supports D1
pci 0000:07:00.0: PME# supported from D0 D1 D3hot
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0x000000-0x00ffff]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 882 MB/s
raid6: int32x2 902 MB/s
raid6: int32x4 656 MB/s
raid6: int32x8 593 MB/s
raid6: mmxx1 2835 MB/s
raid6: mmxx2 3113 MB/s
raid6: sse1x1 1730 MB/s
raid6: sse1x2 2273 MB/s
raid6: sse2x1 3281 MB/s
raid6: sse2x2 3527 MB/s
raid6: using algorithm sse2x2 (3527 MB/s)
PCI: Using ACPI for IRQ routing
pci 0000:00:1c.0: BAR 7: can't allocate resource
pci 0000:00:1c.0: BAR 8: can't allocate resource
pci 0000:00:1c.0: BAR 9: can't allocate resource
pci 0000:00:1c.2: BAR 7: can't allocate resource
pci 0000:00:1c.2: BAR 8: can't allocate resource
pci 0000:00:1c.2: BAR 9: can't allocate resource
pci 0000:00:1c.3: BAR 7: can't allocate resource
pci 0000:00:1c.3: BAR 8: can't allocate resource
pci 0000:00:1c.3: BAR 9: can't allocate resource
pci 0000:00:1c.5: BAR 7: can't allocate resource
pci 0000:00:1c.5: BAR 8: can't allocate resource
pci 0000:00:1c.5: BAR 9: can't allocate resource
pci 0000:06:00.2: BAR 0: can't allocate resource
pci 0000:06:00.3: BAR 0: can't allocate resource
pci 0000:06:00.4: BAR 0: can't allocate resource
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:04: ioport range 0x680-0x69f has been reserved
system 00:04: ioport range 0x480-0x48f has been reserved
system 00:04: ioport range 0xffff-0xffff has been reserved
system 00:04: ioport range 0xffff-0xffff has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1180-0x11ff has been reserved
system 00:04: ioport range 0x164e-0x164f has been reserved
system 00:04: ioport range 0xfe00-0xfe00 has been reserved
system 00:04: ioport range 0x400-0x47f has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x2000-0x2fff
pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: 0xc2000000-0xc20fffff
pci 0000:00:1c.2: PREFETCH window: 0x000000c2100000-0x000000c21fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.3: IO window: disabled
pci 0000:00:1c.3: MEM window: 0xc2200000-0xc22fffff
pci 0000:00:1c.3: PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.5: IO window: disabled
pci 0000:00:1c.5: MEM window: 0xc2300000-0xc23fffff
pci 0000:00:1c.5: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: enabling device (0000 -> 0002)
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: enabling device (0000 -> 0002)
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: enabling device (0000 -> 0002)
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
pci_bus 0000:02: resource 2 mem: [0x0-0xfffff]
pci_bus 0000:06: resource 0 mem: [0x0-0xfff]
pci_bus 0000:06: resource 1 mem: [0xc2000000-0xc20fffff]
pci_bus 0000:06: resource 2 pref mem [0xc2100000-0xc21fffff]
pci_bus 0000:07: resource 0 mem: [0x0-0xfff]
pci_bus 0000:07: resource 1 mem: [0xc2200000-0xc22fffff]
pci_bus 0000:07: resource 2 mem: [0x0-0xfffff]
pci_bus 0000:09: resource 0 mem: [0x0-0xfff]
pci_bus 0000:09: resource 1 mem: [0xc2300000-0xc23fffff]
pci_bus 0000:09: resource 2 mem: [0x0-0xfffff]
pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Freeing initrd memory: 216k freed
Simple Boot Flag at 0x36 set to 0x1
highmem bounce pool size: 64 pages
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 1716
alg: No test for stdrng (krng)
async_tx: api initialized (sync-only)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
vesafb: framebuffer at 0xcd000000, mapped to 0xf8080000, using 6144k, total 14336k
vesafb: mode is 1024x768x16, linelength 48, pages=1
vesafb: protected mode interface info at c000:c1b0
vesafb: pmi: set display start = c00cc213, set palette = c00cc26e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 36178 bytes,<6>...found (1024x768, 35271 bytes, v3).
Console: switching to colour frame buffer device 118x38
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pmp pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar port 0xf0504100 irq 29
ata2: SATA max UDMA/133 abar port 0xf0504180 irq 29
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar port 0xf0504300 irq 29
ata6: SATA max UDMA/133 abar port 0xf0504380 irq 29
PPP generic driver version 2.4.2
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
input: AT Translated Set 2 keyboard as /class/input/input0
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Warning (nspredef-0943): _SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20090320]
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
ata1.00: _GTF unexpected object type 0x1
ata1.00: ATA-8: WDC WD2500BEVT-22ZCT0, 11.01A11, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ata1.00: _GTF unexpected object type 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 11.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AC00, max UDMA/100, ATAPI AN
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A AC00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Couldn't find valid RAM disk image starting at 0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
Freeing unused kernel memory: 312k freed
ACPI: WMI: Mapper loaded
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Linux agpgart interface v0.103
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0504800
ACPI: SSDT bfd1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
ACPI: SSDT bfd18620 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Monitor-Mwait will be used to enter C-1 state
usb usb7: configuration #1 chosen from 1 choice
Monitor-Mwait will be used to enter C-2 state
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
input: Power Button as /class/input/input2
ACPI: Power Button [PWRF]
ACPI: SSDT bfd19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT bfd19f20 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0504c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
acpi device:03: registered as cooling_device2
input: Video Bus as /class/input/input3
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (53 C)
usb 7-6: new high speed USB device using ehci_hcd and address 3
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
Clocksource tsc unstable (delta = -118017279 ns)
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Power Button as /class/input/input5
ACPI: Power Button [PWRB]
input: Sleep Button as /class/input/input6
ACPI: Sleep Button [SLPB]
acer-wmi: Acer Laptop ACPI-WMI Extras
sdhci-pci 0000:06:00.0: SDHCI controller found [197b:2382] (rev 0)
sdhci-pci 0000:06:00.0: enabling device (0000 -> 0002)
sdhci-pci 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:06:00.0: setting latency timer to 64
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:06:00.0] using ADMA
sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:06:00.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
sdhci-pci 0000:06:00.2: PCI INT A disabled
acer-wmi: Brightness must be controlled by generic video driver
tg3.c:v3.98 (February 25, 2009)
tg3 0000:09:00.0: enabling device (0000 -> 0002)
tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:09:00.0: setting latency timer to 64
tg3 0000:09:00.0: wake-up capability disabled by ACPI
tg3 0000:09:00.0: PME# disabled
ath9k 0000:07:00.0: enabling device (0000 -> 0002)
ath9k 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
usb 7-6: configuration #1 chosen from 1 choice
ath9k 0000:07:00.0: setting latency timer to 64
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
eth0: Tigon3 [partno(BCM95764M) rev 5784100] (PCI Express) MAC address 00:23:8b:36:79:82
eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
Linux video capture interface: v2.00
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:a103)
input: Acer Crystal Eye webcam as /class/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: Genius Optical Mouse as /class/input/input8
generic-usb 0003:0458:003A.0001: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1a.1-1/input0
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf89a0000, irq
EXT3 FS on sda5, internal journal
fuse init (API version 7.11)
lp: driver loaded but no devices found
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 1992020k swap on /dev/sda7. Priority:-1 extents:1 across:1992020k
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
ondemand governor failed, too long transition latency of HW, fallback to performance governor
ondemand governor failed, too long transition latency of HW, fallback to performance governor
tg3 0000:09:00.0: wake-up capability disabled by ACPI
tg3 0000:09:00.0: PME# disabled
tg3 0000:09:00.0: irq 30 for MSI/MSI-X
bootsplash: status on console 0 changed to on
CE: hpet increasing min_delta_ns to 15000 nsec

ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
ISOFS: Interleaved files not (yet) supported.

---

Jules ALIX
doug713705
Le #20634701
On Thu, 26 Nov 2009 09:27:38 +0100, Jules ALIX wrote:

ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
ISOFS: Interleaved files not (yet) supported.



Seules les dernières lignes suffisent ;-)

Cependant tu ne dis topujours pas comment tu essayes de monter ce DVD
(avec quelle ligne de commande, quel outil).

Par ailleurs, comment as-tu crée ce DVD, avec quel outil, quelles options... ?


--
Doug713705
capfree
Le #20634941
doug713705 a écrit :
On Thu, 26 Nov 2009 09:27:38 +0100, Jules ALIX wrote:

ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
ISOFS: Interleaved files not (yet) supported.



Seules les dernières lignes suffisent ;-)

Cependant tu ne dis topujours pas comment tu essayes de monter ce DVD
(avec quelle ligne de commande, quel outil).

Par ailleurs, comment as-tu crée ce DVD, avec quel outil, quelles options... ?




Si k3b, les infos de débogage ont-elles été enregistrées?

--
capfree -
Jules ALIX
Le #20637271
"doug713705"
On Thu, 26 Nov 2009 09:27:38 +0100, Jules ALIX wrote:

ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
ISOFS: Interleaved files not (yet) supported.



Seules les dernières lignes suffisent ;-)

Cependant tu ne dis topujours pas comment tu essayes de monter ce DVD
(avec quelle ligne de commande, quel outil).

Par ailleurs, comment as-tu crée ce DVD, avec quel outil, quelles options... ?



il monte tout seul ! dès qu'il est dans le lecteur/graveur dvd...je ne tappe pas
de ligne genre mount....
il a été créé avec le soft NTI8 livré par défaut avec mon pc....

j'ai jetté un oeil dans fstab...aucune référence à hdd ou quoi que ce soit
d'autre ! étrange pour un dvd qui monte tout seul ?
j'ai dans /etc des liens symbolique à priori....dvd et dvd0 rs0 rs1....etc...
j'ai créé un répertoire /mnt/cdrom...nada...

joliet c'est une variante ISO...et Roméo ?


Jules ALIX
doug713705
Le #20637351
On Thu, 26 Nov 2009 14:37:01 +0100, Jules ALIX wrote:

ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
ISOFS: Interleaved files not (yet) supported.



Seules les dernières lignes suffisent ;-)

Cependant tu ne dis topujours pas comment tu essayes de monter ce DVD
(avec quelle ligne de commande, quel outil).

Par ailleurs, comment as-tu crée ce DVD, avec quel outil, quelles options... ?



il monte tout seul ! dès qu'il est dans le lecteur/graveur dvd...je ne tappe pas
de ligne genre mount....



Ok pour ça, mais as tu essayé de le monter à la main :
mount -t iso9660 /dev/sdx /mnt/cdrom (à adapter à ta configuration)

il a été créé avec le soft NTI8 livré par défaut avec mon pc....



Ah ! Bon... Et il n'y a pas des options à selectionner dans ton truc ?
Si oui, quelles options ont-elles été selectionnées lors de la
création de ce DVD ?

j'ai jetté un oeil dans fstab...aucune référence à hdd ou quoi que ce soit
d'autre ! étrange pour un dvd qui monte tout seul ?



Ben non, c'est normal.
man hald

j'ai dans /etc des liens symbolique à priori....dvd et dvd0 rs0 rs1....etc...
j'ai créé un répertoire /mnt/cdrom...nada...



Tant qu'à faire des choses au pif, un petit rm -Rf / est toujours bon à
tenter :-D

joliet c'est une variante ISO...et Roméo ?



Mort empoisonné il y'a belle lurette.

--
Doug713705
grostophe
Le #20637471
>
j'ai dans /etc des liens symbolique à priori....dvd et dvd0 rs0 rs1....etc...
j'ai créé un répertoire /mnt/cdrom...nada...



Tant qu'à faire des choses au pif, un petit rm -Rf / est toujours bon à
tenter :-D





ça, c'est sympa comme commande. je ne connaissais pas, mais je re
commande ;-) !!!

--
linux user #375006 sur http://counter.li.org
AbulEduLive (basée sur Xubuntu)

"La libre communication des pensées et des opinions est un des droits
les plus précieux de l'homme ; tout citoyen peut donc parler, écrire,
imprimer librement, sauf à répondre de l'abus de cette liberté dans les
cas déterminés par la loi."
article 11 de la déclaration de droits de l'homme et du citoyen du 26
août 1789.
Stéphane CARPENTIER
Le #20639551
grostophe wrote:
j'ai dans /etc des liens symbolique à priori....dvd et dvd0 rs0 rs1....etc...
j'ai créé un répertoire /mnt/cdrom...nada...


Tant qu'à faire des choses au pif, un petit rm -Rf / est toujours bon à
tenter :-D



ça, c'est sympa comme commande. je ne connaissais pas, mais je re
commande ;-) !!!



Ça fait longtemps que ça ne marche plus sous Linux.
grostophe
Le #20639541
Stéphane CARPENTIER a tapoté sur son clavier:
grostophe wrote:
j'ai dans /etc des liens symbolique à priori....dvd et dvd0 rs0 rs1....etc...
j'ai créé un répertoire /mnt/cdrom...nada...


Tant qu'à faire des choses au pif, un petit rm -Rf / est toujours bon à
tenter :-D


ça, c'est sympa comme commande. je ne connaissais pas, mais je re
commande ;-) !!!



Ça fait longtemps que ça ne marche plus sous Linux.



si si, il parait. voir sur peWidiaki ,-)

--
linux user #375006 sur http://counter.li.org
AbulEduLive (basée sur Xubuntu)

"La libre communication des pensées et des opinions est un des droits
les plus précieux de l'homme ; tout citoyen peut donc parler, écrire,
imprimer librement, sauf à répondre de l'abus de cette liberté dans les
cas déterminés par la loi."
article 11 de la déclaration de droits de l'homme et du citoyen du 26
août 1789.
Publicité
Poster une réponse
Anonyme