freeze après mise en veille et hibernation

Le
HEGRON Florian
--=-4zckk9dFY2QKN/buiSdE
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 8bit

Bonjour,

Voilà j'ai un gros problème de "freeze" lorsque je mets en veille ou en
hibernation mon ordinateur (COMPAQ Presario A900). La mise en veille en
elle même se passe bien. Mais au redémarrage, je tape le mot de passe de
la session verrouillée, et hop, l'ordinateur ne réponds plus du tout
(image bloquée et impossible d'accéder à la console).

Pour ceux qui savent lire le syslog (20:17 - mise en veille; 20:18 -
tentative de réveil) je le mets en dessous.
Et encore en dessous, mon lspci.
Si je dois faire un reportbug, je ne sais sur quel paquet.

Merci beaucoup



Florian HEGRON



Mar 1 20:17:21 MumuAndFlo anacron[4267]: Anacron 2.3 started on
2011-03-01
Mar 1 20:17:21 MumuAndFlo anacron[4267]: Normal exit (0 jobs run)
Mar 1 20:17:21 MumuAndFlo dhclient: Internet Systems Consortium DHCP
Client 4.1.1-P1
Mar 1 20:17:21 MumuAndFlo dhclient: Copyright 2004-2010 Internet
Systems Consortium.
Mar 1 20:17:21 MumuAndFlo dhclient: All rights reserved.
Mar 1 20:17:21 MumuAndFlo dhclient: For info, please visit
https://www.isc.org/software/dhcp/
Mar 1 20:17:21 MumuAndFlo dhclient:
Mar 1 20:17:21 MumuAndFlo dhclient: Listening on
LPF/ath0/00:23:4d:01:c3:55
Mar 1 20:17:21 MumuAndFlo dhclient: Sending on
LPF/ath0/00:23:4d:01:c3:55
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on Socket/fallback
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Withdrawing address
record for 192.168.1.2 on ath0.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Leaving mDNS multicast
group on interface ath0.IPv4 with address 192.168.1.2.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Interface ath0.IPv4 no
longer relevant for mDNS.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Interface ath0.IPv6 no
longer relevant for mDNS.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Leaving mDNS multicast
group on interface ath0.IPv6 with address fe80::223:4dff:fe01:c355.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Withdrawing address
record for fe80::223:4dff:fe01:c355 on ath0.
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.273338] ADDRCONF(NETDEV_UP):
ath0: link is not ready
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.277406]
ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
Mar 1 20:17:22 MumuAndFlo dhclient: Internet Systems Consortium DHCP
Client 4.1.1-P1
Mar 1 20:17:22 MumuAndFlo dhclient: Copyright 2004-2010 Internet
Systems Consortium.
Mar 1 20:17:22 MumuAndFlo dhclient: All rights reserved.
Mar 1 20:17:22 MumuAndFlo dhclient: For info, please visit
https://www.isc.org/software/dhcp/
Mar 1 20:17:22 MumuAndFlo dhclient:
Mar 1 20:17:22 MumuAndFlo dhclient: Listening on
LPF/eth0/00:1e:ec:89:19:be
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on
LPF/eth0/00:1e:ec:89:19:be
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on Socket/fallback
Mar 1 20:17:22 MumuAndFlo dhclient: DHCPRELEASE on eth0 to 192.168.1.1
port 67
Mar 1 20:17:22 MumuAndFlo avahi-autoipd(eth0)[2165]: Got SIGTERM,
quitting.
Mar 1 20:17:22 MumuAndFlo avahi-autoipd(eth0)[2165]: Callout STOP,
address 169.254.8.172 on interface eth0
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Withdrawing address
record for 169.254.8.172 on eth0.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Leaving mDNS multicast
group on interface eth0.IPv4 with address 169.254.8.172.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Interface eth0.IPv4 no
longer relevant for mDNS.
Mar 1 20:17:22 MumuAndFlo dhclient: receive_packet failed on eth0:
Network is down
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.508604] eth0: link down
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.509346] ADDRCONF(NETDEV_UP):
eth0: link is not ready
Mar 1 20:17:22 MumuAndFlo dhclient: Internet Systems Consortium DHCP
Client 4.1.1-P1
Mar 1 20:17:22 MumuAndFlo dhclient: Copyright 2004-2010 Internet
Systems Consortium.
Mar 1 20:17:22 MumuAndFlo dhclient: All rights reserved.
Mar 1 20:17:22 MumuAndFlo dhclient: For info, please visit
https://www.isc.org/software/dhcp/
Mar 1 20:17:22 MumuAndFlo dhclient:
Mar 1 20:17:22 MumuAndFlo dhclient: Listening on
LPF/ath0/00:23:4d:01:c3:55
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on
LPF/ath0/00:23:4d:01:c3:55
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on Socket/fallback
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.601084] ADDRCONF(NETDEV_UP):
ath0: link is not ready
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.607129]
ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
Mar 1 20:17:22 MumuAndFlo dhclient: Internet Systems Consortium DHCP
Client 4.1.1-P1
Mar 1 20:17:22 MumuAndFlo dhclient: Copyright 2004-2010 Internet
Systems Consortium.
Mar 1 20:17:22 MumuAndFlo dhclient: All rights reserved.
Mar 1 20:17:22 MumuAndFlo dhclient: For info, please visit
https://www.isc.org/software/dhcp/
Mar 1 20:17:22 MumuAndFlo dhclient:
Mar 1 20:17:22 MumuAndFlo dhclient: Listening on
LPF/eth0/00:1e:ec:89:19:be
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on
LPF/eth0/00:1e:ec:89:19:be
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on Socket/fallback
Mar 1 20:17:22 MumuAndFlo dhclient: DHCPRELEASE on eth0 to 192.168.1.1
port 67
Mar 1 20:17:22 MumuAndFlo dhclient: send_packet: Network is unreachable
Mar 1 20:17:22 MumuAndFlo dhclient: send_packet: please consult README
file regarding broadcast address.
Mar 1 20:17:22 MumuAndFlo dhclient: receive_packet failed on eth0:
Network is down
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.706023] eth0: link down
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.706765] ADDRCONF(NETDEV_UP):
eth0: link is not ready
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.866322] PM: Syncing
filesystems done.
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.878136] PM: Preparing system
for mem sleep
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.152969] Freezing user space
processes (elapsed 0.00 seconds) done.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.154062] Freezing remaining
freezable tasks (elapsed 0.00 seconds) done.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.154119] PM: Entering mem sleep
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.154138] Suspending console(s)
(use no_console_suspend to debug)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.184050] sd 2:0:0:0: [sda]
Synchronizing SCSI cache
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.184173] sd 2:0:0:0: [sda]
Stopping disk
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.131265] ath_pci 0000:01:00.0:
PCI INT A disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.176225] ata_piix 0000:00:1f.1:
PCI INT B disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.176239] ehci_hcd 0000:00:1d.7:
PCI INT A disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.176248] uhci_hcd 0000:00:1d.2:
PCI INT C disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.176256] uhci_hcd 0000:00:1d.1:
PCI INT B disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.176265] uhci_hcd 0000:00:1d.0:
PCI INT D disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.280840] HDA Intel
0000:00:1b.0: PCI INT A disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.380320] ACPI: Preparing to
enter system sleep state S3
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.382391] Disabling non-boot
CPUs
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.382410] CPU0 attaching NULL
sched-domain.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.382413] CPU1 attaching NULL
sched-domain.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.429029] CPU0 attaching NULL
sched-domain.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.532030] CPU 1 is now offline
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.532033] SMP alternatives:
switching to UP code
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] Back to C!
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU0: Thermal
monitoring enabled (TM1)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] Enabling non-boot
CPUs
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] SMP alternatives:
switching to SMP code
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.542420] Booting processor 1
APIC 0x1 ip 0x6000
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] Initializing CPU#1
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: L1 I cache: 32K,
L1 D cache: 32K
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: L2 cache: 1024K
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU 1/0x1 -> Node 0
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: Physical
Processor ID: 0
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: Processor Core
ID: 1
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU1: Thermal
monitoring enabled (TM1)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.632107] CPU1: Intel(R)
Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.632163] CPU0 attaching NULL
sched-domain.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660035] CPU0 attaching
sched-domain:
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660039] domain 0: span 0-1
level MC
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660041] groups: 0 1
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660046] CPU1 attaching
sched-domain:
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660048] domain 0: span 0-1
level MC
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660050] groups: 1 0
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660556] CPU1 is up
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660872] ACPI: Waking up from
system sleep state S3
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663038] i915 0000:00:02.0:
restoring config space at offset 0xf (was 0x100, writing 0x10b)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663048] i915 0000:00:02.0:
restoring config space at offset 0x8 (was 0x1, writing 0x30d1)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663053] i915 0000:00:02.0:
restoring config space at offset 0x6 (was 0xc, writing 0x8000000c)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663057] i915 0000:00:02.0:
restoring config space at offset 0x4 (was 0x4, writing 0x91000004)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663063] i915 0000:00:02.0:
restoring config space at offset 0x1 (was 0x900000, writing 0x900407)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663116] HDA Intel
0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing
0x10b)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663137] HDA Intel
0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing
0x92400004)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663147] HDA Intel
0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000,
writing 0x100002)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663182] pcieport 0000:00:1c.0:
restoring config space at offset 0xf (was 0x100, writing 0x10b)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663196] pcieport 0000:00:1c.0:
restoring config space at offset 0x9 (was 0x10001, writing 0x90f19001)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663202] pcieport 0000:00:1c.0:
restoring config space at offset 0x8 (was 0x0, writing 0x92309130)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663207] pcieport 0000:00:1c.0:
restoring config space at offset 0x7 (was 0x0, writing 0x2020)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663213] pcieport 0000:00:1c.0:
restoring config space at offset 0x6 (was 0x0, writing 0x10100)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663226] pcieport 0000:00:1c.0:
restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663290] uhci_hcd 0000:00:1d.0:
restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663324] uhci_hcd 0000:00:1d.1:
restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663359] uhci_hcd 0000:00:1d.2:
restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663403] ehci_hcd 0000:00:1d.7:
restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663438] pci 0000:00:1e.0:
restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663444] pci 0000:00:1e.0:
restoring config space at offset 0x8 (was 0x0, writing 0x91209120)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663450] pci 0000:00:1e.0:
restoring config space at offset 0x7 (was 0x22800000, writing
0x22801010)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663464] pci 0000:00:1e.0:
restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663552] ata_piix 0000:00:1f.1:
restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663599] ahci 0000:00:1f.2:
restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663689] ath_pci 0000:01:00.0:
restoring config space at offset 0xf (was 0x100, writing 0x10b)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663718] ath_pci 0000:01:00.0:
restoring config space at offset 0x4 (was 0x4, writing 0x91300004)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663725] ath_pci 0000:01:00.0:
restoring config space at offset 0x3 (was 0x0, writing 0x10)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663735] ath_pci 0000:01:00.0:
restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663796] 8139too 0000:02:01.0:
restoring config space at offset 0x5 (was 0x0, writing 0x91200000)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663802] 8139too 0000:02:01.0:
restoring config space at offset 0x4 (was 0x1, writing 0x1001)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663808] 8139too 0000:02:01.0:
restoring config space at offset 0x3 (was 0x0, writing 0x4000)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663817] 8139too 0000:02:01.0:
restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.910092] i915 0000:00:02.0:
setting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.932495] [Firmware Bug]: ACPI:
ACPI brightness control misses _BQC function
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.028169] HDA Intel
0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.028177] HDA Intel
0000:00:1b.0: setting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117857] uhci_hcd 0000:00:1d.0:
PCI INT D -> GSI 21 (level, low) -> IRQ 21
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117864] uhci_hcd 0000:00:1d.0:
setting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117896] usb usb2: root hub
lost power or was reset
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117923] uhci_hcd 0000:00:1d.1:
PCI INT B -> GSI 20 (level, low) -> IRQ 20
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117930] uhci_hcd 0000:00:1d.1:
setting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117962] usb usb3: root hub
lost power or was reset
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117988] uhci_hcd 0000:00:1d.2:
PCI INT C -> GSI 19 (level, low) -> IRQ 19
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117995] uhci_hcd 0000:00:1d.2:
setting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118027] usb usb4: root hub
lost power or was reset
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118049] ehci_hcd 0000:00:1d.7:
PCI INT A -> GSI 23 (level, low) -> IRQ 23
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118056] ehci_hcd 0000:00:1d.7:
setting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118086] pci 0000:00:1e.0:
setting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118098] ata_piix 0000:00:1f.1:
PCI INT B -> GSI 19 (level, low) -> IRQ 19
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118103] ata_piix 0000:00:1f.1:
setting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118129] ahci 0000:00:1f.2:
setting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118211] ath_pci 0000:01:00.0:
PCI INT A -> GSI 16 (level, low) -> IRQ 16
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118220] ath_pci 0000:01:00.0:
setting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.120118] eth0: link down
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.260102] sd 2:0:0:0: [sda]
Starting disk
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.328451] ata1.00: ACPI cmd
ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.328455] ata1.00: ACPI cmd
ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.344353] ata1.00: configured
for MWDMA2
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.000081] ata3: SATA link up 1.5
Gbps (SStatus 113 SControl 300)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.002843] ata3.00: ACPI cmd
ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.005685] ata3.00: ACPI cmd
ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.005713] ata3.00: configured
for UDMA/100
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.144081] usb 1-5: reset high
speed USB device using ehci_hcd and address 2
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.936081] usb 1-6: reset high
speed USB device using ehci_hcd and address 3
Mar 1 20:18:21 MumuAndFlo kernel: [ 1379.085367] PM: Finishing wakeup.
Mar 1 20:18:21 MumuAndFlo avahi-daemon[1278]: Joining mDNS multicast
group on interface ath0.IPv6 with address fe80::223:4dff:fe01:c355.
Mar 1 20:18:21 MumuAndFlo avahi-daemon[1278]: New relevant interface
ath0.IPv6 for mDNS.
Mar 1 20:18:21 MumuAndFlo avahi-daemon[1278]: Registering new address
record for fe80::223:4dff:fe01:c355 on ath0.*.
Mar 1 20:18:21 MumuAndFlo acpid: client 2127[0:0] has disconnected
Mar 1 20:18:21 MumuAndFlo acpid: client connected from 2127[0:0]
Mar 1 20:18:21 MumuAndFlo acpid: 1 client rule loaded
Mar 1 20:18:21 MumuAndFlo kernel: [ 1379.085370] Restarting tasks
done.
Mar 1 20:18:21 MumuAndFlo anacron[4441]: Anacron 2.3 started on
2011-03-01
Mar 1 20:18:21 MumuAndFlo anacron[4441]: Normal exit (0 jobs run)
Mar 1 20:18:23 MumuAndFlo anacron[4497]: Anacron 2.3 started on
2011-03-01
Mar 1 20:18:23 MumuAndFlo anacron[4497]: Normal exit (0 jobs run)
Mar 1 20:18:26 MumuAndFlo kernel: [ 1384.364079] ath0: no IPv6 routers
present






--=-4zckk9dFY2QKN/buiSdE
Content-Type: text/html; charset="utf-8"
Content-Transfer-Encoding: 7bit

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.30.3">
</HEAD>
<BODY>
Bonjour,<BR>
<BR>
Voil&#224; j'ai un gros probl&#232;me de &quot;freeze&quot; lorsque je mets en veille ou en hibernation mon ordinateur (COMPAQ Presario A900). La mise en veille en elle m&#234;me se passe bien. Mais au red&#233;marrage, je tape le mot de passe de la session verrouill&#233;e, et hop, l'ordinateur ne r&#233;ponds plus du tout (image bloqu&#233;e et impossible d'acc&#233;der &#224; la console).<BR>
<BR>
Pour ceux qui savent lire le syslog (20:17 - mise en veille; 20:18 - tentative de r&#233;veil) je le mets en dessous.<BR>
Et encore en dessous, mon lspci.<BR>
Si je dois faire un reportbug, je ne sais sur quel paquet.<BR>
<BR>
Merci beaucoup<BR>
<BR>
<BR>
<BR>
Florian HEGRON<BR>
<BR>
<BR>
<BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:21 MumuAndFlo anacron[4267]: Anacron 2.3 started on 2011-03-01</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:21 MumuAndFlo anacron[4267]: Normal exit (0 jobs run)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:21 MumuAndFlo dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:21 MumuAndFlo dhclient: Copyright 2004-2010 Internet Systems Consortium.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:21 MumuAndFlo dhclient: All rights reserved.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:21 MumuAndFlo dhclient: For info, please visit https://www.isc.org/software/dhcp/</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:21 MumuAndFlo dhclient: </FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:21 MumuAndFlo dhclient: Listening on LPF/ath0/00:23:4d:01:c3:55</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:21 MumuAndFlo dhclient: Sending on&nbsp;&nbsp; LPF/ath0/00:23:4d:01:c3:55</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;&nbsp; Socket/fallback</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Withdrawing address record for 192.168.1.2 on ath0.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Leaving mDNS multicast group on interface ath0.IPv4 with address 192.168.1.2.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Interface ath0.IPv4 no longer relevant for mDNS.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Interface ath0.IPv6 no longer relevant for mDNS.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Leaving mDNS multicast group on interface ath0.IPv6 with address fe80::223:4dff:fe01:c355.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Withdrawing address record for fe80::223:4dff:fe01:c355 on ath0.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo kernel: [ 1373.273338] ADDRCONF(NETDEV_UP): ath0: link is not ready</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo kernel: [ 1373.277406] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Copyright 2004-2010 Internet Systems Consortium.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: All rights reserved.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: For info, please visit https://www.isc.org/software/dhcp/</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: </FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Listening on LPF/eth0/00:1e:ec:89:19:be</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;&nbsp; LPF/eth0/00:1e:ec:89:19:be</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;&nbsp; Socket/fallback</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: DHCPRELEASE on eth0 to 192.168.1.1 port 67</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-autoipd(eth0)[2165]: Got SIGTERM, quitting.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-autoipd(eth0)[2165]: Callout STOP, address 169.254.8.172 on interface eth0</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Withdrawing address record for 169.254.8.172 on eth0.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Leaving mDNS multicast group on interface eth0.IPv4 with address 169.254.8.172.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Interface eth0.IPv4 no longer relevant for mDNS.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: receive_packet failed on eth0: Network is down</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo kernel: [ 1373.508604] eth0: link down</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo kernel: [ 1373.509346] ADDRCONF(NETDEV_UP): eth0: link is not ready</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Copyright 2004-2010 Internet Systems Consortium.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: All rights reserved.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: For info, please visit https://www.isc.org/software/dhcp/</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: </FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Listening on LPF/ath0/00:23:4d:01:c3:55</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;&nbsp; LPF/ath0/00:23:4d:01:c3:55</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;&nbsp; Socket/fallback</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo kernel: [ 1373.601084] ADDRCONF(NETDEV_UP): ath0: link is not ready</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo kernel: [ 1373.607129] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Internet Systems Consortium DHCP Client 4.1.1-P1</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Copyright 2004-2010 Internet Systems Consortium.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: All rights reserved.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: For info, please visit https://www.isc.org/software/dhcp/</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: </FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Listening on LPF/eth0/00:1e:ec:89:19:be</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;&nbsp; LPF/eth0/00:1e:ec:89:19:be</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;&nbsp; Socket/fallback</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: DHCPRELEASE on eth0 to 192.168.1.1 port 67</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: send_packet: Network is unreachable</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: send_packet: please consult README file regarding broadcast address.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: receive_packet failed on eth0: Network is down</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo kernel: [ 1373.706023] eth0: link down</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo kernel: [ 1373.706765] ADDRCONF(NETDEV_UP): eth0: link is not ready</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo kernel: [ 1373.866322] PM: Syncing filesystems done.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:17:22 MumuAndFlo kernel: [ 1373.878136] PM: Preparing system for mem sleep</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1374.152969] Freezing user space processes (elapsed 0.00 seconds) done.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1374.154062] Freezing remaining freezable tasks (elapsed 0.00 seconds) done.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1374.154119] PM: Entering mem sleep</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1374.154138] Suspending console(s) (use no_console_suspend to debug)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1374.184050] sd 2:0:0:0: [sda] Synchronizing SCSI cache</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1374.184173] sd 2:0:0:0: [sda] Stopping disk</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.131265] ath_pci 0000:01:00.0: PCI INT A disabled</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.176225] ata_piix 0000:00:1f.1: PCI INT B disabled</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.176239] ehci_hcd 0000:00:1d.7: PCI INT A disabled</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.176248] uhci_hcd 0000:00:1d.2: PCI INT C disabled</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.176256] uhci_hcd 0000:00:1d.1: PCI INT B disabled</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.176265] uhci_hcd 0000:00:1d.0: PCI INT D disabled</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.280840] HDA Intel 0000:00:1b.0: PCI INT A disabled</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.380320] ACPI: Preparing to enter system sleep state S3</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.382391] Disabling non-boot CPUs </FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.382410] CPU0 attaching NULL sched-domain.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.382413] CPU1 attaching NULL sched-domain.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.429029] CPU0 attaching NULL sched-domain.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.532030] CPU 1 is now offline</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.532033] SMP alternatives: switching to UP code</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] Back to C!</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU0: Thermal monitoring enabled (TM1)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] Enabling non-boot CPUs </FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] SMP alternatives: switching to SMP code</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.542420] Booting processor 1 APIC 0x1 ip 0x6000</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] Initializing CPU#1</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: L1 I cache: 32K, L1 D cache: 32K</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: L2 cache: 1024K</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU 1/0x1 -&gt; Node 0</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: Physical Processor ID: 0</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: Processor Core ID: 1</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU1: Thermal monitoring enabled (TM1)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.632107] CPU1: Intel(R) Pentium(R) Dual&nbsp; CPU&nbsp; T2390&nbsp; @ 1.86GHz stepping 0d</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.632163] CPU0 attaching NULL sched-domain.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.660035] CPU0 attaching sched-domain:</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.660039]&nbsp; domain 0: span 0-1 level MC</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.660041]&nbsp;&nbsp; groups: 0 1</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.660046] CPU1 attaching sched-domain:</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.660048]&nbsp; domain 0: span 0-1 level MC</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.660050]&nbsp;&nbsp; groups: 1 0</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.660556] CPU1 is up</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.660872] ACPI: Waking up from system sleep state S3</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663038] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663048] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x30d1)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663053] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0x8000000c)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663057] i915 0000:00:02.0: restoring config space at offset 0x4 (was 0x4, writing 0x91000004)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663063] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900000, writing 0x900407)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663116] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663137] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0x92400004)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663147] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663182] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663196] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x90f19001)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663202] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0x92309130)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663207] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x2020)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663213] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663226] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663290] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663324] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663359] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663403] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663438] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663444] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0x91209120)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663450] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x22801010)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663464] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663552] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663599] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663689] ath_pci 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663718] ath_pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x4, writing 0x91300004)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663725] ath_pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663735] ath_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663796] 8139too 0000:02:01.0: restoring config space at offset 0x5 (was 0x0, writing 0x91200000)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663802] 8139too 0000:02:01.0: restoring config space at offset 0x4 (was 0x1, writing 0x1001)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663808] 8139too 0000:02:01.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.663817] 8139too 0000:02:01.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.910092] i915 0000:00:02.0: setting latency timer to 64</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1375.932495] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.028169] HDA Intel 0000:00:1b.0: PCI INT A -&gt; GSI 22 (level, low) -&gt; IRQ 22</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.028177] HDA Intel 0000:00:1b.0: setting latency timer to 64</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.117857] uhci_hcd 0000:00:1d.0: PCI INT D -&gt; GSI 21 (level, low) -&gt; IRQ 21</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.117864] uhci_hcd 0000:00:1d.0: setting latency timer to 64</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.117896] usb usb2: root hub lost power or was reset</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.117923] uhci_hcd 0000:00:1d.1: PCI INT B -&gt; GSI 20 (level, low) -&gt; IRQ 20</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.117930] uhci_hcd 0000:00:1d.1: setting latency timer to 64</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.117962] usb usb3: root hub lost power or was reset</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.117988] uhci_hcd 0000:00:1d.2: PCI INT C -&gt; GSI 19 (level, low) -&gt; IRQ 19</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.117995] uhci_hcd 0000:00:1d.2: setting latency timer to 64</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.118027] usb usb4: root hub lost power or was reset</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.118049] ehci_hcd 0000:00:1d.7: PCI INT A -&gt; GSI 23 (level, low) -&gt; IRQ 23</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.118056] ehci_hcd 0000:00:1d.7: setting latency timer to 64</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.118086] pci 0000:00:1e.0: setting latency timer to 64</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.118098] ata_piix 0000:00:1f.1: PCI INT B -&gt; GSI 19 (level, low) -&gt; IRQ 19</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.118103] ata_piix 0000:00:1f.1: setting latency timer to 64</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.118129] ahci 0000:00:1f.2: setting latency timer to 64</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.118211] ath_pci 0000:01:00.0: PCI INT A -&gt; GSI 16 (level, low) -&gt; IRQ 16</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.118220] ath_pci 0000:01:00.0: setting latency timer to 64</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.120118] eth0: link down</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.260102] sd 2:0:0:0: [sda] Starting disk</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.328451] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.328455] ata1.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1376.344353] ata1.00: configured for MWDMA2</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1378.000081] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1378.002843] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1378.005685] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1378.005713] ata3.00: configured for UDMA/100</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1378.144081] usb 1-5: reset high speed USB device using ehci_hcd and address 2</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1378.936081] usb 1-6: reset high speed USB device using ehci_hcd and address 3</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1379.085367] PM: Finishing wakeup.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo avahi-daemon[1278]: Joining mDNS multicast group on interface ath0.IPv6 with address fe80::223:4dff:fe01:c355.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo avahi-daemon[1278]: New relevant interface ath0.IPv6 for mDNS.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo avahi-daemon[1278]: Registering new address record for fe80::223:4dff:fe01:c355 on ath0.*.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo acpid: client 2127[0:0] has disconnected</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo acpid: client connected from 2127[0:0]</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo acpid: 1 client rule loaded</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo kernel: [ 1379.085370] Restarting tasks done.</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo anacron[4441]: Anacron 2.3 started on 2011-03-01</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:21 MumuAndFlo anacron[4441]: Normal exit (0 jobs run)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:23 MumuAndFlo anacron[4497]: Anacron 2.3 started on 2011-03-01</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:23 MumuAndFlo anacron[4497]: Normal exit (0 jobs run)</FONT><BR>
<FONT SIZE="2">Mar&nbsp; 1 20:18:26 MumuAndFlo kernel: [ 1384.364079] ath0: no IPv6 routers present</FONT><BR>
<BR>
<BR>
<BR>
<BR>
<BR>
</BODY>
</HTML>

--=-4zckk9dFY2QKN/buiSdE--

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers debian-user-french-REQUEST@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmaster@lists.debian.org
Archive: http://lists.debian.org/1299008592.3015.10.camel@MumuAndFlo
Vidéos High-Tech et Jeu Vidéo
Téléchargements
Vos réponses Page 1 / 2
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
Thibault Dupuis
Le #23168321
--Apple-Mail-8-727059520
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=utf-8



Le 1 mars 2011 à 20:43, HEGRON Florian
Bonjour,

Voilà j'ai un gros problème de "freeze" lorsque je mets en veill e ou en hibernation mon ordinateur (COMPAQ Presario A900). La mise en veille en elle même se passe bien. Mais au redémarrage, je tape le mot d e passe de la session verrouillée, et hop, l'ordinateur ne réponds plus du tout (image bloquée et impossible d'accéder à la con sole).

Pour ceux qui savent lire le syslog (20:17 - mise en veille; 20:18 - tenta tive de réveil) je le mets en dessous.
Et encore en dessous, mon lspci.
Si je dois faire un reportbug, je ne sais sur quel paquet.

Merci beaucoup



Florian HEGRON



Mar 1 20:17:21 MumuAndFlo anacron[4267]: Anacron 2.3 started on 2011-03-0 1
Mar 1 20:17:21 MumuAndFlo anacron[4267]: Normal exit (0 jobs run)
Mar 1 20:17:21 MumuAndFlo dhclient: Internet Systems Consortium DHCP Clie nt 4.1.1-P1
Mar 1 20:17:21 MumuAndFlo dhclient: Copyright 2004-2010 Internet Systems C onsortium.
Mar 1 20:17:21 MumuAndFlo dhclient: All rights reserved.
Mar 1 20:17:21 MumuAndFlo dhclient: For info, please visit https://www.is c.org/software/dhcp/
Mar 1 20:17:21 MumuAndFlo dhclient:
Mar 1 20:17:21 MumuAndFlo dhclient: Listening on LPF/ath0/00:23:4d:01:c3: 55
Mar 1 20:17:21 MumuAndFlo dhclient: Sending on LPF/ath0/00:23:4d:01:c3: 55
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on Socket/fallback
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Withdrawing address record f or 192.168.1.2 on ath0.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Leaving mDNS multicast grou p on interface ath0.IPv4 with address 192.168.1.2.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Interface ath0.IPv4 no long er relevant for mDNS.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Interface ath0.IPv6 no long er relevant for mDNS.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Leaving mDNS multicast grou p on interface ath0.IPv6 with address fe80::223:4dff:fe01:c355.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Withdrawing address record f or fe80::223:4dff:fe01:c355 on ath0.
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.273338] ADDRCONF(NETDEV_UP): ath 0: link is not ready
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.277406] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
Mar 1 20:17:22 MumuAndFlo dhclient: Internet Systems Consortium DHCP Clie nt 4.1.1-P1
Mar 1 20:17:22 MumuAndFlo dhclient: Copyright 2004-2010 Internet Systems C onsortium.
Mar 1 20:17:22 MumuAndFlo dhclient: All rights reserved.
Mar 1 20:17:22 MumuAndFlo dhclient: For info, please visit https://www.is c.org/software/dhcp/
Mar 1 20:17:22 MumuAndFlo dhclient:
Mar 1 20:17:22 MumuAndFlo dhclient: Listening on LPF/eth0/00:1e:ec:89:19: be
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on LPF/eth0/00:1e:ec:89:19: be
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on Socket/fallback
Mar 1 20:17:22 MumuAndFlo dhclient: DHCPRELEASE on eth0 to 192.168.1.1 po rt 67
Mar 1 20:17:22 MumuAndFlo avahi-autoipd(eth0)[2165]: Got SIGTERM, quittin g.
Mar 1 20:17:22 MumuAndFlo avahi-autoipd(eth0)[2165]: Callout STOP, addres s 169.254.8.172 on interface eth0
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Withdrawing address record f or 169.254.8.172 on eth0.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Leaving mDNS multicast grou p on interface eth0.IPv4 with address 169.254.8.172.
Mar 1 20:17:22 MumuAndFlo avahi-daemon[1278]: Interface eth0.IPv4 no long er relevant for mDNS.
Mar 1 20:17:22 MumuAndFlo dhclient: receive_packet failed on eth0: Networ k is down
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.508604] eth0: link down
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.509346] ADDRCONF(NETDEV_UP): eth 0: link is not ready
Mar 1 20:17:22 MumuAndFlo dhclient: Internet Systems Consortium DHCP Clie nt 4.1.1-P1
Mar 1 20:17:22 MumuAndFlo dhclient: Copyright 2004-2010 Internet Systems C onsortium.
Mar 1 20:17:22 MumuAndFlo dhclient: All rights reserved.
Mar 1 20:17:22 MumuAndFlo dhclient: For info, please visit https://www.is c.org/software/dhcp/
Mar 1 20:17:22 MumuAndFlo dhclient:
Mar 1 20:17:22 MumuAndFlo dhclient: Listening on LPF/ath0/00:23:4d:01:c3: 55
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on LPF/ath0/00:23:4d:01:c3: 55
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on Socket/fallback
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.601084] ADDRCONF(NETDEV_UP): ath 0: link is not ready
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.607129] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
Mar 1 20:17:22 MumuAndFlo dhclient: Internet Systems Consortium DHCP Clie nt 4.1.1-P1
Mar 1 20:17:22 MumuAndFlo dhclient: Copyright 2004-2010 Internet Systems C onsortium.
Mar 1 20:17:22 MumuAndFlo dhclient: All rights reserved.
Mar 1 20:17:22 MumuAndFlo dhclient: For info, please visit https://www.is c.org/software/dhcp/
Mar 1 20:17:22 MumuAndFlo dhclient:
Mar 1 20:17:22 MumuAndFlo dhclient: Listening on LPF/eth0/00:1e:ec:89:19: be
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on LPF/eth0/00:1e:ec:89:19: be
Mar 1 20:17:22 MumuAndFlo dhclient: Sending on Socket/fallback
Mar 1 20:17:22 MumuAndFlo dhclient: DHCPRELEASE on eth0 to 192.168.1.1 po rt 67
Mar 1 20:17:22 MumuAndFlo dhclient: send_packet: Network is unreachable
Mar 1 20:17:22 MumuAndFlo dhclient: send_packet: please consult README fi le regarding broadcast address.
Mar 1 20:17:22 MumuAndFlo dhclient: receive_packet failed on eth0: Networ k is down
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.706023] eth0: link down
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.706765] ADDRCONF(NETDEV_UP): eth 0: link is not ready
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.866322] PM: Syncing filesystems . .. done.
Mar 1 20:17:22 MumuAndFlo kernel: [ 1373.878136] PM: Preparing system for mem sleep
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.152969] Freezing user space proc esses ... (elapsed 0.00 seconds) done.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.154062] Freezing remaining freez able tasks ... (elapsed 0.00 seconds) done.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.154119] PM: Entering mem sleep
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.154138] Suspending console(s) (u se no_console_suspend to debug)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.184050] sd 2:0:0:0: [sda] Synchr onizing SCSI cache
Mar 1 20:18:21 MumuAndFlo kernel: [ 1374.184173] sd 2:0:0:0: [sda] Stoppi ng disk
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.131265] ath_pci 0000:01:00.0: PC I INT A disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.176225] ata_piix 0000:00:1f.1: P CI INT B disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.176239] ehci_hcd 0000:00:1d.7: P CI INT A disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.176248] uhci_hcd 0000:00:1d.2: P CI INT C disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.176256] uhci_hcd 0000:00:1d.1: P CI INT B disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.176265] uhci_hcd 0000:00:1d.0: P CI INT D disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.280840] HDA Intel 0000:00:1b.0: P CI INT A disabled
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.380320] ACPI: Preparing to enter system sleep state S3
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.382391] Disabling non-boot CPUs . ..
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.382410] CPU0 attaching NULL sche d-domain.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.382413] CPU1 attaching NULL sche d-domain.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.429029] CPU0 attaching NULL sche d-domain.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.532030] CPU 1 is now offline
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.532033] SMP alternatives: switch ing to UP code
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] Back to C!
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU0: Thermal monitoring enabled (TM1)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] Enabling non-boot CPUs . ..
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] SMP alternatives: switch ing to SMP code
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.542420] Booting processor 1 APIC 0x1 ip 0x6000
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] Initializing CPU#1
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: L1 I cache: 32K, L1 D cache: 32K
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: L2 cache: 1024K
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU 1/0x1 -> Node 0
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: Physical Processor I D: 0
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU: Processor Core ID: 1
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.537366] CPU1: Thermal monitoring enabled (TM1)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.632107] CPU1: Intel(R) Pentium(R ) Dual CPU T2390 @ 1.86GHz stepping 0d
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.632163] CPU0 attaching NULL sche d-domain.
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660035] CPU0 attaching sched-dom ain:
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660039] domain 0: span 0-1 leve l MC
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660041] groups: 0 1
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660046] CPU1 attaching sched-dom ain:
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660048] domain 0: span 0-1 leve l MC
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660050] groups: 1 0
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660556] CPU1 is up
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.660872] ACPI: Waking up from sys tem sleep state S3
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663038] i915 0000:00:02.0: resto ring config space at offset 0xf (was 0x100, writing 0x10b)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663048] i915 0000:00:02.0: resto ring config space at offset 0x8 (was 0x1, writing 0x30d1)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663053] i915 0000:00:02.0: resto ring config space at offset 0x6 (was 0xc, writing 0x8000000c)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663057] i915 0000:00:02.0: resto ring config space at offset 0x4 (was 0x4, writing 0x91000004)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663063] i915 0000:00:02.0: resto ring config space at offset 0x1 (was 0x900000, writing 0x900407)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663116] HDA Intel 0000:00:1b.0: r estoring config space at offset 0xf (was 0x100, writing 0x10b)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663137] HDA Intel 0000:00:1b.0: r estoring config space at offset 0x4 (was 0x4, writing 0x92400004)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663147] HDA Intel 0000:00:1b.0: r estoring config space at offset 0x1 (was 0x100000, writing 0x100002)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663182] pcieport 0000:00:1c.0: r estoring config space at offset 0xf (was 0x100, writing 0x10b)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663196] pcieport 0000:00:1c.0: r estoring config space at offset 0x9 (was 0x10001, writing 0x90f19001)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663202] pcieport 0000:00:1c.0: r estoring config space at offset 0x8 (was 0x0, writing 0x92309130)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663207] pcieport 0000:00:1c.0: r estoring config space at offset 0x7 (was 0x0, writing 0x2020)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663213] pcieport 0000:00:1c.0: r estoring config space at offset 0x6 (was 0x0, writing 0x10100)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663226] pcieport 0000:00:1c.0: r estoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663290] uhci_hcd 0000:00:1d.0: r estoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663324] uhci_hcd 0000:00:1d.1: r estoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663359] uhci_hcd 0000:00:1d.2: r estoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663403] ehci_hcd 0000:00:1d.7: r estoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663438] pci 0000:00:1e.0: restor ing config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663444] pci 0000:00:1e.0: restor ing config space at offset 0x8 (was 0x0, writing 0x91209120)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663450] pci 0000:00:1e.0: restor ing config space at offset 0x7 (was 0x22800000, writing 0x22801010)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663464] pci 0000:00:1e.0: restor ing config space at offset 0x1 (was 0x100000, writing 0x100007)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663552] ata_piix 0000:00:1f.1: r estoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663599] ahci 0000:00:1f.2: resto ring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663689] ath_pci 0000:01:00.0: re storing config space at offset 0xf (was 0x100, writing 0x10b)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663718] ath_pci 0000:01:00.0: re storing config space at offset 0x4 (was 0x4, writing 0x91300004)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663725] ath_pci 0000:01:00.0: re storing config space at offset 0x3 (was 0x0, writing 0x10)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663735] ath_pci 0000:01:00.0: re storing config space at offset 0x1 (was 0x100000, writing 0x100007)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663796] 8139too 0000:02:01.0: re storing config space at offset 0x5 (was 0x0, writing 0x91200000)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663802] 8139too 0000:02:01.0: re storing config space at offset 0x4 (was 0x1, writing 0x1001)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663808] 8139too 0000:02:01.0: re storing config space at offset 0x3 (was 0x0, writing 0x4000)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.663817] 8139too 0000:02:01.0: re storing config space at offset 0x1 (was 0x2900000, writing 0x2900007)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.910092] i915 0000:00:02.0: setti ng latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1375.932495] [Firmware Bug]: ACPI: AC PI brightness control misses _BQC function
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.028169] HDA Intel 0000:00:1b.0: P CI INT A -> GSI 22 (level, low) -> IRQ 22
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.028177] HDA Intel 0000:00:1b.0: s etting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117857] uhci_hcd 0000:00:1d.0: P CI INT D -> GSI 21 (level, low) -> IRQ 21
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117864] uhci_hcd 0000:00:1d.0: s etting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117896] usb usb2: root hub lost p ower or was reset
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117923] uhci_hcd 0000:00:1d.1: P CI INT B -> GSI 20 (level, low) -> IRQ 20
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117930] uhci_hcd 0000:00:1d.1: s etting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117962] usb usb3: root hub lost p ower or was reset
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117988] uhci_hcd 0000:00:1d.2: P CI INT C -> GSI 19 (level, low) -> IRQ 19
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.117995] uhci_hcd 0000:00:1d.2: s etting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118027] usb usb4: root hub lost p ower or was reset
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118049] ehci_hcd 0000:00:1d.7: P CI INT A -> GSI 23 (level, low) -> IRQ 23
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118056] ehci_hcd 0000:00:1d.7: s etting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118086] pci 0000:00:1e.0: settin g latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118098] ata_piix 0000:00:1f.1: P CI INT B -> GSI 19 (level, low) -> IRQ 19
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118103] ata_piix 0000:00:1f.1: s etting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118129] ahci 0000:00:1f.2: setti ng latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118211] ath_pci 0000:01:00.0: PC I INT A -> GSI 16 (level, low) -> IRQ 16
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.118220] ath_pci 0000:01:00.0: se tting latency timer to 64
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.120118] eth0: link down
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.260102] sd 2:0:0:0: [sda] Starti ng disk
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.328451] ata1.00: ACPI cmd ef/03: 0c:00:00:00:a0 (SET FEATURES) filtered out
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.328455] ata1.00: ACPI cmd ef/03: 22:00:00:00:a0 (SET FEATURES) filtered out
Mar 1 20:18:21 MumuAndFlo kernel: [ 1376.344353] ata1.00: configured for M WDMA2
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.000081] ata3: SATA link up 1.5 G bps (SStatus 113 SControl 300)
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.002843] ata3.00: ACPI cmd ef/10: 03:00:00:00:a0 (SET FEATURES) filtered out
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.005685] ata3.00: ACPI cmd ef/10: 03:00:00:00:a0 (SET FEATURES) filtered out
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.005713] ata3.00: configured for U DMA/100
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.144081] usb 1-5: reset high spee d USB device using ehci_hcd and address 2
Mar 1 20:18:21 MumuAndFlo kernel: [ 1378.936081] usb 1-6: reset high spee d USB device using ehci_hcd and address 3
Mar 1 20:18:21 MumuAndFlo kernel: [ 1379.085367] PM: Finishing wakeup.
Mar 1 20:18:21 MumuAndFlo avahi-daemon[1278]: Joining mDNS multicast grou p on interface ath0.IPv6 with address fe80::223:4dff:fe01:c355.
Mar 1 20:18:21 MumuAndFlo avahi-daemon[1278]: New relevant interface ath0 .IPv6 for mDNS.
Mar 1 20:18:21 MumuAndFlo avahi-daemon[1278]: Registering new address rec ord for fe80::223:4dff:fe01:c355 on ath0.*.
Mar 1 20:18:21 MumuAndFlo acpid: client 2127[0:0] has disconnected
Mar 1 20:18:21 MumuAndFlo acpid: client connected from 2127[0:0]
Mar 1 20:18:21 MumuAndFlo acpid: 1 client rule loaded
Mar 1 20:18:21 MumuAndFlo kernel: [ 1379.085370] Restarting tasks ... don e.
Mar 1 20:18:21 MumuAndFlo anacron[4441]: Anacron 2.3 started on 2011-03-0 1
Mar 1 20:18:21 MumuAndFlo anacron[4441]: Normal exit (0 jobs run)
Mar 1 20:18:23 MumuAndFlo anacron[4497]: Anacron 2.3 started on 2011-03-0 1
Mar 1 20:18:23 MumuAndFlo anacron[4497]: Normal exit (0 jobs run)
Mar 1 20:18:26 MumuAndFlo kernel: [ 1384.364079] ath0: no IPv6 routers pr esent







Bonsoir,

Très étrange, j'ai déjà eu le même problème su r un Compaq Evo N400C et cela était dû à une incompatibilità © avec l'ACPI. Essaie de désactiver l'utilisation de l'ACPI pour voir si ça vient de là.

C'est la plus probable des pistes.
--Apple-Mail-8-727059520
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html;
charset=utf-8


Bonjour,<br>
<br>
Voilà j'ai un gros problème de "freeze" lorsque je mets en veille o u en hibernation mon ordinateur (COMPAQ Presario A900). La mise en veille en elle même se passe bien. Mais au redémarrage, je tape le mot de p asse de la session verrouillée, et hop, l'ordinateur ne réponds pl us du tout (image bloquée et impossible d'accéder à la consol e).<br>
<br>
Pour ceux qui savent lire le syslog (20:17 - mise en veille; 20:18 - tentati ve de réveil) je le mets en dessous.<br>
Et encore en dessous, mon lspci.<br>
Si je dois faire un reportbug, je ne sais sur quel paquet.<br>
<br>
Merci beaucoup<br>
<br>
<br>
<br>
Florian HEGRON<br>
<br>
<br>
<br>
<font size="2">Mar&nbsp; 1 20:17:21 MumuAndFlo anacron[4267]: Normal exit ( 0 jobs run)</font><br>
<font size="2">Mar&nbsp; 1 20:17:21 MumuAndFlo dhclient: </font><br>
<font size="2">Mar&nbsp; 1 20:17:21 MumuAndFlo dhclient: Listening on LPF/ ath0/00:23:4d:01:c3:55</font><br>
<font size="2">Mar&nbsp; 1 20:17:21 MumuAndFlo dhclient: Sending on&nbsp;& nbsp; LPF/ath0/00:23:4d:01:c3:55</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;& nbsp; Socket/fallback</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: </font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Listening on LPF/ eth0/00:1e:ec:89:19:be</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;& nbsp; LPF/eth0/00:1e:ec:89:19:be</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;& nbsp; Socket/fallback</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: receive_packet fa iled on eth0: Network is down</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: </font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Listening on LPF/ ath0/00:23:4d:01:c3:55</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;& nbsp; LPF/ath0/00:23:4d:01:c3:55</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;& nbsp; Socket/fallback</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: </font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Listening on LPF/ eth0/00:1e:ec:89:19:be</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;& nbsp; LPF/eth0/00:1e:ec:89:19:be</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: Sending on&nbsp;& nbsp; Socket/fallback</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: send_packet: Netw ork is unreachable</font><br>
<font size="2">Mar&nbsp; 1 20:17:22 MumuAndFlo dhclient: receive_packet fa iled on eth0: Network is down</font><br>
<font size="2">Mar&nbsp; 1 20:18:21 MumuAndFlo acpid: client 2127[0:0] has disconnected</font><br>
<font size="2">Mar&nbsp; 1 20:18:21 MumuAndFlo acpid: client connected fro m 2127[0:0]</font><br>
<font size="2">Mar&nbsp; 1 20:18:21 MumuAndFlo acpid: 1 client rule loaded </font><br>
<font size="2">Mar&nbsp; 1 20:18:21 MumuAndFlo anacron[4441]: Normal exit ( 0 jobs run)</font><br>
<font size="2">Mar&nbsp; 1 20:18:23 MumuAndFlo anacron[4497]: Normal exit ( 0 jobs run)</font><br>
<br>
<br>
<br>
<br>
<br>


--Apple-Mail-8-727059520--

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Bernard Schoenacker
Le #23168441
Le Tue, 01 Mar 2011 20:43:12 +0100,
HEGRON Florian
Bonjour,

Voilà j'ai un gros problème de "freeze" lorsque je mets en veille ou
en hibernation mon ordinateur (COMPAQ Presario A900). La mise en
veille en elle même se passe bien. Mais au redémarrage, je tape le
mot de passe de la session verrouillée, et hop, l'ordinateur ne
réponds plus du tout (image bloquée et impossible d'accéder à la
console).

Pour ceux qui savent lire le syslog (20:17 - mise en veille; 20:18 -
tentative de réveil) je le mets en dessous.
Et encore en dessous, mon lspci.
Si je dois faire un reportbug, je ne sais sur quel paquet.

Merci beaucoup

Florian HEGRON




bonjour,


en consultant le syslog :

-a) erreur dhcp
-b) bug firmaware ACPI

pourrais tu également donner la liste des paquets installés
concernant la partie acpi et les particularités
d'un ordi portable ...

liste des paquets :

dkms
firmaware-linux

liste des paquet installés pour l'acpi :

for pkg in `apt-cache search acpi |awk '{print $1}' |xargs` ;do dpkg -l | grep ii |awk '{print $2}' | grep $pkg ;done


ensuite, la liste des modules concernant (vérification):

apm
acpi

utiliser : modconf


autre remarque :

serait il possible de configuer le MUA pour que le html ne
soit plus dans le message ...

slt
bernard

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
giggzounet
Le #23169951
Le 01/03/2011 20:43, HEGRON Florian a écrit :
Bonjour,

Voilà j'ai un gros problème de "freeze" lorsque je mets en veille ou en
hibernation mon ordinateur (COMPAQ Presario A900). La mise en veille en
elle même se passe bien. Mais au redémarrage, je tape le mot de passe de
la session verrouillée, et hop, l'ordinateur ne réponds plus du tout
(image bloquée et impossible d'accéder à la console).

Pour ceux qui savent lire le syslog (20:17 - mise en veille; 20:18 -
tentative de réveil) je le mets en dessous.
Et encore en dessous, mon lspci.
Si je dois faire un reportbug, je ne sais sur quel paquet.

Merci beaucoup





salut,

j'ai lu il y a qqs temps un pb semblable sur un eeepc du au module ehci.
Il fallait le "décharger" et le recharger avant/après la mise en veille.
je suppose que tu as pm-utils d'installer:

1: tu crées un fichier sous /etc/pm/config.d/ (par exemple "config")
2: tu mets dedans SUSPEND_MODULES="ehci_hcd"

tu retestes le suspend.

ce freeze est surement du à un module qu'il faut charger/decharger avant
de rentrer en veille. vraisemblablement une conséquence d'un bug dans le
bios. si c'est pas ehci_hcd, ben tu testes un autre :D

Bye
GiGGz

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/ikl5en$mi2$
Thibault Dupuis
Le #23170441
Le 2 mars 2011 à 11:16, giggzounet
Le 01/03/2011 20:43, HEGRON Florian a écrit :
Bonjour,

Voilà j'ai un gros problème de "freeze" lorsque je mets en veil le ou en
hibernation mon ordinateur (COMPAQ Presario A900). La mise en veille en
elle même se passe bien. Mais au redémarrage, je tape le mot de passe de
la session verrouillée, et hop, l'ordinateur ne réponds plus du tout
(image bloquée et impossible d'accéder à la console).

Pour ceux qui savent lire le syslog (20:17 - mise en veille; 20:18 -
tentative de réveil) je le mets en dessous.
Et encore en dessous, mon lspci.
Si je dois faire un reportbug, je ne sais sur quel paquet.

Merci beaucoup





salut,

j'ai lu il y a qqs temps un pb semblable sur un eeepc du au module ehci.
Il fallait le "décharger" et le recharger avant/après la mise en veille.
je suppose que tu as pm-utils d'installer:

1: tu crées un fichier sous /etc/pm/config.d/ (par exemple "config")
2: tu mets dedans SUSPEND_MODULES="ehci_hcd"

tu retestes le suspend.

ce freeze est surement du à un module qu'il faut charger/decharger av ant
de rentrer en veille. vraisemblablement une conséquence d'un bug dans le
bios. si c'est pas ehci_hcd, ben tu testes un autre :D

Bye
GiGGz



Bonjour,

Avez-vous regardé si il y avait une mise à jour du BIOS pour votre ordinateur?
Dès fois ce problème peut être réglé en faisant la m ise à jour.

Cordialement.
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Bernard Schoenacker
Le #23177381
Le Fri, 04 Mar 2011 22:09:36 +0100,
a écrit :

Bonjour,

Alors je vais essayé d'afficher le résultat de chaque commande :

#for pkg in `apt-cache search acpi |awk '{print }' |xargs` ;do
dpkg -l |grep ii |awk '{print }' | grep $pkg ;done



Bonjour,

HORREUR , MALHEUR !!!!!!

Sort de ton corral vacher, et va prendre une douche ...

Merci de bien vouloir recommencer à rédiger
convenablement ...

Autrement, prend le kit pour réaliser les chateau de
sable et les anti-fuites pampers pour le "Kindergarten" ...

Si tu n'est pas capable de reprendre exactement les instructions
voici la méthode simplifiée :

dpkg -l |grep ii |grep acpi | awk '{print $2" "$3}'>>list-pkg-acpi.txt

normalement tu doit avoir un éqivalent à ceci :

acpi 1.5-2
acpi-fakekey 0.138-7
acpi-support 0.138-7
acpi-support-base 0.138-7
acpid 1:2.0.8-2

attention les version indiquées ci dessus sont pour une sid et
non pour la Squeeze ...

merci de ne pas recommencer ce genre de gaffes tu risque de
réveiller un ours mal en point qui lit les messages ...

quelques liens :

http://www.linux-pour-lesnuls.com/gawk.php
http://cli.asyd.net/home/filtres/awk/presentation
http://ufrsciencestech.u-bourgogne.fr/m2bdia/mi300/MNT/awk.pdf

je suis très patient, mais je n'aime plus du tout répéter
pour un bouseux sur son canasson ...

voici ma contribution te concernant puisque c'est trolldy:

http://www.youtube.com/watch?v=KdE-Rw2TjBQ
http://www.youtube.com/watch?v=UkkWguRNLx4

slt
bernard


le message doit se trouver à la suite de cette ligne :

# --------------------------------------------------------




--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
hogren
Le #23177471
Sorry !

Oui, belle gaffe de ma part.
Excusez moi. J'ai fait un copier-colle de la fonction, j'ai dû bugué
quelque part. J'ai refait comme Bernard me l'a indiqué et
effectivement,
voici le resultat :

acpi 1.5-2
acpi-fakekey 0.137-5
acpi-support 0.137-5
acpi-support-base 0.137-5
acpid 1:2.0.7-1


Voilà, encore désolé, et merci pour l'aide !

Florian HEGRON



On Fri, 4 Mar 2011 23:15:47 +0100, Bernard Schoenacker wrote:

Le Fri, 04 Mar 2011 22:09:36 +0100,
[1] a écrit :

Bonjour, Alors je vais essayé d'afficher le résultat de chaque
commande : #for pkg in `apt-cache search acpi |awk '{print }'
|xargs`
;do dpkg -l |grep ii |awk '{print }' | grep $pkg ;done


Bonjour, HORREUR , MALHEUR !!!!!! Sort de ton corral vacher, et va
prendre une douche ... Merci de bien vouloir recommencer à rédiger
convenablement ... Autrement, prend le kit pour réaliser les chateau
de
sable et les anti-fuites pampers pour le "Kindergarten" ... Si tu
n'est
pas capable de reprendre exactement les instructions voici la méthode
simplifiée : dpkg -l |grep ii |grep acpi | awk '{print "
"}'>>list-pkg-acpi.txt normalement tu doit avoir un éqivalent à ceci
: acpi 1.5-2 acpi-fakekey 0.138-7 acpi-support 0.138-7
acpi-support-base
0.138-7 acpid 1:2.0.8-2 attention les version indiquées ci dessus
sont
pour une sid et non pour la Squeeze ... merci de ne pas recommencer
ce
genre de gaffes tu risque de réveiller un ours mal en point qui lit
les
messages ... quelques liens :
http://www.linux-pour-lesnuls.com/gawk.php
[2] http://cli.asyd.net/home/filtres/awk/presentation [3]
http://ufrsciencestech.u-bourgogne.fr/m2bdia/mi300/MNT/awk.pdf [4] je
suis très patient, mais je n'aime plus du tout répéter pour un
bouseux
sur son canasson ... voici ma contribution te concernant puisque
c'est
trolldy: http://www.youtube.com/watch?v=KdE-Rw2TjBQ [5]
http://www.youtube.com/watch?v=UkkWguRNLx4 [6] slt bernard le message
doit se trouver à la suite de cette ligne : #
-------------------------------------------------------- -- Lisez la
FAQ
de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists [7] Pour vous DESABONNER,
envoyez
un message avec comme objet "unsubscribe" vers
[8] En cas de soucis,
contactez EN ANGLAIS [9] Archive:



http://lists.debian.org/
[10]




Links:
------
[1] mailto:
[2] http://www.linux-pour-lesnuls.com/gawk.php
[3] http://cli.asyd.net/home/filtres/awk/presentation
[4] http://ufrsciencestech.u-bourgogne.fr/m2bdia/mi300/MNT/awk.pdf
[5] http://www.youtube.com/watch?v=KdE-Rw2TjBQ
[6] http://www.youtube.com/watch?v=UkkWguRNLx4
[7] http://wiki.debian.org/fr/FrenchLists
[8] mailto:
[9] mailto:
[10]
http://lists.debian.org/

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Bernard Schoenacker
Le #23177831
Le Fri, 04 Mar 2011 23:35:38 +0100,
a écrit :

Sorry !

Oui, belle gaffe de ma part.
Excusez moi. J'ai fait un copier-colle de la fonction, j'ai dû bugué
quelque part. J'ai refait comme Bernard me l'a indiqué et
effectivement,
voici le resultat :

acpi 1.5-2
acpi-fakekey 0.137-5
acpi-support 0.137-5
acpi-support-base 0.137-5
acpid 1:2.0.7-1


Voilà, encore désolé, et merci pour l'aide !

Florian HEGRON



bonjour,

prénom : Florian
âge maxi : 16 ans
âge mental : 6 ans

Va prendre ton cheval de bois et apprend à lire et à
écrire ...

GIYF ==>>[]

raz le bol d'avoir un boutoneux qui n'en fait qu'à sa tête ...


CDLT
Bernard



--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Pierre Meurisse
Le #23177861
Bonjour,

On Sat, Mar 05, 2011 at 08:53:29AM +0100, Bernard Schoenacker wrote:

bonjour,

prénom : Florian
âge maxi : 16 ans
âge mental : 6 ans

Va prendre ton cheval de bois et apprend à lire et à
écrire ...

GIYF ==>>[]

raz le bol d'avoir un boutoneux qui n'en fait qu'à sa tête ...


CDLT
Bernard



et autres.

Est-il vraiment nécessaire d'insulter les gens sur cette liste ?
Que dit la nétiquette à ce sujet ?

--
Pierre Meurisse

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Bernard Schoenacker
Le #23177931
Le Sat, 5 Mar 2011 09:29:13 +0100,
Pierre Meurisse
Pierre Meurisse



Bonjour,


merci pour la remarque, mais monsieur Paul (acteur) n'était
pas non plus un tendre (cf : les tontons flingueurs) ...

une peut de culture générale :

http://andrepousse.free.fr/pmeurisse.htm

Please, please, feed or not feed the troll, that's question ?


mais le fond du sujet principal était : "ça marche pô"


dans la même veine de style épistolaire j'ai trouvé de bell es
perles issues des archives de :"duf" ...


je demande réellement à prendre la main dessus via ssh pour
réellement en avoir le cœur net sur le fond du problème
concernant la partie acpi et ses autres erreurs ....


slt
bernard

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
hogren
Le #23178171
--=_71c1a2be858a6b33d80344672dfb0a20
Content-Transfer-Encoding: 8bit
Content-Type: text/plain; charset=UTF-8

Il est bien loin le temps où linux était synonime de liberté, de
convivialité, de respect.

Il est bien loin le temps où les gens qui
renvoyaient à la nétiquette la suivaient eux-même.

Il est bien loin le
temps où l'expression "âge mental" n'était utilisée que par des
primaires, voire collègiens.

Je ne perdrait plus mon temps (après ce
message) pour te parler Bernard. Si je me suis mis aux listes de
diffusions Debian, c'est pour m'instruire et comprendre un peu mieux ce
monde dont je suis passionné depuis quelques années. Il arrive à tous de
faire des erreurs, même plusieurs à la suite. Je ne suis pas fermé au
critique, conseil, et autres sur l'utilisation des listes. Mais les
insulte du genre "Tu sais pas ça, t'es nul" ou "Tu sais pas décrire ton
problème, va chier" n'ont pas à exister, d'après moi, et pas seulement
ici.

J'aurais encore plein de choses à dire, mais cela ne sert à rien,
on ne peut changer les gens, ou presque...

Pour finir, je dirais juste
que moi, simple linuxien débutant, passionné, voulant le promouvoir au
grand public, souhaitant même devenir développeur Debian, et bien
entendu assez agé pour réfléchir aux buts que je veux me fixer dans ma
vie, me fait insulté en public par quelqu'un qui ne me connais pas, qui
ne me voit pas, qui n'était pas obligé de répondre aux messages que j'ai
envoyé. qui je suppose retire une certaine satisfaction à cela en plus.


Ne répondez pas trop nombreux à ce message, gardez à l'esprit (à
l'inverse de certains) que les listes, surtout celle-ci est faite pour
l'entraide au sein de Debian, et non un débat sur les différentes
mentalités qui éxiste.

Et si un Gérant de listes passe par là,
n'hésitez pas à supprimer tout ce sujet avec ses réponses, qui
encrassent l'utopie que je vois en Debian.

Merci

Florian HEGRON

On
Sat, 5 Mar 2011 08:53:29 +0100, Bernard Schoenacker wrote:

Le Fri,


04 Mar 2011 23:35:38 +0100,
[1] a écrit :

Sorry




! Oui, belle gaffe de ma part. Excusez moi. J'ai fait un copier-colle de
la fonction, j'ai dû bugué quelque part. J'ai refait comme Bernard me
l'a indiqué et effectivement, voici le resultat : acpi 1.5-2
acpi-fakekey 0.137-5 acpi-support 0.137-5 acpi-support-base 0.137-5
acpid 1:2.0.7-1 Voilà, encore désolé, et merci pour l'aide ! Florian
HEGRON
bonjour, prénom : Florian âge maxi : 16 ans âge mental : 6 ans


Va prendre ton cheval de bois et apprend à lire et à écrire ... GIYF
==>>[] raz le bol d'avoir un boutoneux qui n'en fait qu'à sa tête ...
CDLT Bernard -- Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists [2] Pour vous DESABONNER, envoyez
un message avec comme objet "unsubscribe" vers
[3] En cas de soucis,
contactez EN ANGLAIS [4] Archive:
http://lists.debian.org/
[5]


Links:
------
[1] mailto:
[2]
http://wiki.debian.org/fr/FrenchLists
[3]
mailto:
[4]
mailto:
[5]
http://lists.debian.org/

--=_71c1a2be858a6b33d80344672dfb0a20
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8

<html><body>
Il est bien loin le temps o&ugrave; linux &eacute;tait synonime de libert&e acute;, de convivialit&eacute;, de respect. <p>On Sat, 5 Mar 2011 08:53:29 +0100, Bernard Schoenacker wrote:</p>
<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2p x solid; margin-left:5px; width:100%"><!-- html ignored --><!-- head ignore d --><!-- meta ignored -->
<pre>Le Fri, 04 Mar 2011 23:35:38 +0100,

<blockquote type="cite" style="padding-left:5px; border-left:#1010ff 2p x solid; margin-left:5px; width:100%">Sorry !

Oui, belle gaffe de ma part.
Excusez moi. J'ai fait un copier-colle de la fonction, j'ai d&ucirc; bugu&e acute;
quelque part. J'ai refait comme Bernard me l'a indiqu&eacute; et
effectivement,
voici le resultat :

acpi 1.5-2
acpi-fakekey 0.137-5
acpi-support 0.137-5
acpi-support-base 0.137-5
acpid 1:2.0.7-1


Voil&agrave;, encore d&eacute;sol&eacute;, et merci pour l'aide !

Florian HEGRON
</blockquote>
bonjour,

pr&eacute;nom : Florian
&acirc;ge maxi : 16 ans
&acirc;ge mental : 6 ans

Va prendre ton cheval de bois et apprend &agrave; lire et &agrave;
&eacute;crire ...

GIYF ==&gt;&gt;[]

raz le bol d'avoir un boutoneux qui n'en fait qu'&agrave; sa t&ecirc;te ...


CDLT
Bernard



<span class="sig">--
Lisez la FAQ de la liste avant de poser une question :

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers En cas de soucis, contactez EN ANGLAIS Archive:
</span></pre>
</blockquote>
</body></html>

--=_71c1a2be858a6b33d80344672dfb0a20--

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Publicité
Poster une réponse
Anonyme