Gros problème USB

Le
Patrick
Bonjour,

J'ai depuis quelques jours des soucis avec mon USB. On dirait que quand
je ne branche que le disque externe, ça marche, mais dès que je met
l'imprimante, c'est la panique: le disque devient inaccessible, ou alors
hyper lent, et l'imprimante aussi fait n'importe quoi.

Le système est Ubuntu 9.10, noyau 2.6.31-19-generic, x86_64.

Je précise que les périphériques sont alimentés sur secteur.

Voici quelques infos, s'il y a un gourou dans l'assistance, je lui
serais très reconnaissant, car je suis un peu largué. Merci d'avance

$ lsusb

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 0d49:7310 Maxtor
Bus 001 Device 004: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1
Flash Card Reader/Writer (Internal/External)
Bus 001 Device 002: ID 03f0:6911 Hewlett-Packard PhotoSmart D7200 series
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 004 Device 003: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96
Optical Wheel Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

$ dmesg |grep -i error

[ 1.810034] usb 1-4: device not accepting address 3, error -71
[ 787.336921] sd 4:0:0:0: [sdg] Unhandled error code
[ 787.336934] end_request: I/O error, dev sdg, sector 63
[ 787.336945] Buffer I/O error on device sdg1, logical block 0
[ 787.336948] lost page write due to I/O error on sdg1

$ dmesg

[ 0.600868] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.600974] alloc irq_desc for 23 on node 0
[ 0.600976] alloc kstat_irqs on node 0
[ 0.600980] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 0.600997] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.601000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.601047] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 0.604935] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.604949] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3104000
[ 0.620036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.620172] usb usb1: configuration #1 chosen from 1 choice
[ 0.620216] hub 1-0:1.0: USB hub found
[ 0.620223] hub 1-0:1.0: 8 ports detected
[ 0.620291] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.620305] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.620415] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 0.620421] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.620424] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.620460] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 0.620482] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
[ 0.620554] usb usb2: configuration #1 chosen from 1 choice
[ 0.620577] hub 2-0:1.0: USB hub found
[ 0.620583] hub 2-0:1.0: 2 ports detected
[ 0.620645] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 0.620650] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.620653] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.620682] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 0.620709] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
[ 0.620779] usb usb3: configuration #1 chosen from 1 choice
[ 0.620803] hub 3-0:1.0: USB hub found
[ 0.620809] hub 3-0:1.0: 2 ports detected
[ 0.620867] alloc irq_desc for 18 on node 0
[ 0.620869] alloc kstat_irqs on node 0
[ 0.620873] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 0.620878] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.620881] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.620920] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 0.620947] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
[ 0.621014] usb usb4: configuration #1 chosen from 1 choice
[ 0.621041] hub 4-0:1.0: USB hub found
[ 0.621046] hub 4-0:1.0: 2 ports detected
[ 0.621104] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low)
-> IRQ 16
[ 0.621110] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.621113] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.621141] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 5
[ 0.621170] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
[ 0.621241] usb usb5: configuration #1 chosen from 1 choice
[ 0.621264] hub 5-0:1.0: USB hub found
[ 0.621272] hub 5-0:1.0: 2 ports detected
[ 0.621369] PNP: No PS/2 controller found. Probing ports directly.
[ 0.621681] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.621689] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.621771] mice: PS/2 mouse device common for all mice
[ 0.621891] rtc_cmos 00:04: RTC can wake from S4
[ 0.621937] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.621964] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.622088] device-mapper: uevent: version 1.0.3
[ 0.622175] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
initialised: dm-devel@redhat.com
[ 0.622230] device-mapper: multipath: version 1.1.0 loaded
[ 0.622233] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.622365] cpuidle: using governor ladder
[ 0.622367] cpuidle: using governor menu
[ 0.622752] TCP cubic registered
[ 0.622877] NET: Registered protocol family 10
[ 0.623303] lo: Disabled Privacy Extensions
[ 0.623583] NET: Registered protocol family 17
[ 0.623601] Bluetooth: L2CAP ver 2.13
[ 0.623603] Bluetooth: L2CAP socket layer initialized
[ 0.623607] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.623609] Bluetooth: SCO socket layer initialized
[ 0.623631] Bluetooth: RFCOMM TTY layer initialized
[ 0.623634] Bluetooth: RFCOMM socket layer initialized
[ 0.623636] Bluetooth: RFCOMM ver 1.11
[ 0.625448] PM: Resume from disk failed.
[ 0.625461] registered taskstats version 1
[ 0.625567] Magic number: 14:642:237
[ 0.625649] rtc_cmos 00:04: setting system clock to 2010-02-24
16:13:16 UTC (1267027996)
[ 0.625652] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.625654] EDD information not available.
[ 0.781617] ata2.01: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 0.820221] ata2.01: configured for UDMA/100
[ 0.830220] ata1.00: HPA unlocked: 976771055 -> 976773168, native
976773168
[ 0.830225] ata1.00: ATA-8: STM3500418AS, CC38, max UDMA/133
[ 0.830227] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.870404] ata1.00: configured for UDMA/133
[ 0.870543] scsi 0:0:0:0: Direct-Access ATA STM3500418AS
CC38 PQ: 0 ANSI: 5
[ 0.870695] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.870728] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 0.870811] sd 0:0:0:0: [sda] Write Protect is off
[ 0.870814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.870837] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.870961] sda:
[ 0.874145] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22NS50
TN01 PQ: 0 ANSI: 5
[ 0.895688] sda1 sda2 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram
cd/rw xa/form2 cdda tray
[ 0.895880] Uniform CD-ROM driver Revision: 3.20
[ 0.895955] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 0.895993] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 0.907943] sda5 sda6 >
[ 0.918029] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.918047] Freeing unused kernel memory: 660k freed
[ 0.918208] Write protecting the kernel read-only data: 7584k
[ 0.951287] usb 1-2: new high speed USB device using ehci_hcd and
address 2
[ 1.044233] Floppy drive(s): fd0 is 1.44M
[ 1.070464] FDC 0 is a post-1991 82077
[ 1.110949] usb 1-2: configuration #1 chosen from 1 choice
[ 1.118232] Initializing USB Mass Storage driver
[ 1.118448] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1.118537] usb-storage: device found at 2
[ 1.118539] usb-storage: waiting for device to settle before scanning
[ 1.118549] usbcore: registered new interface driver usb-storage
[ 1.118552] USB Mass Storage support registered.
[ 1.230019] usb 1-4: new high speed USB device using ehci_hcd and
address 3
[ 1.810034] usb 1-4: device not accepting address 3, error -71
[ 1.904753] PM: Starting manual resume from disk
[ 1.904757] PM: Resume from partition 8:5
[ 1.904759] PM: Checking hibernation image.
[ 1.904906] PM: Resume from disk failed.
[ 1.919411] EXT4-fs (sda1): barriers enabled
[ 1.931274] usb 1-4: new high speed USB device using ehci_hcd and
address 4
[ 1.932214] kjournald2 starting: pid 390, dev sda1:8, commit interval
5 seconds
[ 1.932231] EXT4-fs (sda1): delayed allocation enabled
[ 1.932236] EXT4-fs: file extents enabled
[ 1.933903] EXT4-fs: mballoc enabled
[ 1.933916] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 2.083609] usb 1-4: configuration #1 chosen from 1 choice
[ 2.084689] scsi3 : SCSI emulation for USB Mass Storage devices
[ 2.084800] usb-storage: device found at 4
[ 2.084802] usb-storage: waiting for device to settle before scanning
[ 2.320037] usb 1-7: new high speed USB device using ehci_hcd and
address 7
[ 2.361023] type05 audit(1267027998.234:2):
operation="profile_load" pidA8 name=/usr/share/gdm/guest-session/Xsession
[ 2.363182] type05 audit(1267027998.234:3):
operation="profile_load" pidA9 name=/sbin/dhclient3
[ 2.363897] type05 audit(1267027998.234:4):
operation="profile_load" pidA9
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 2.364282] type05 audit(1267027998.234:5):
operation="profile_load" pidA9
name=/usr/lib/connman/scripts/dhclient-script
[ 2.398886] type05 audit(1267027998.264:6):
operation="profile_load" pidB0 name=/usr/bin/evince
[ 2.410325] type05 audit(1267027998.284:7):
operation="profile_load" pidB0 name=/usr/bin/evince-previewer
[ 2.417054] type05 audit(1267027998.284:8):
operation="profile_load" pidB0 name=/usr/bin/evince-thumbnailer
[ 2.437826] type05 audit(1267027998.304:9):
operation="profile_load" pidB2 name=/usr/lib/cups/backend/cups-pdf
[ 2.438696] type05 audit(1267027998.304:10):
operation="profile_load" pidB2 name=/usr/sbin/cupsd
[ 2.472954] usb 1-7: configuration #1 chosen from 1 choice
[ 2.473208] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2.473333] usb-storage: device found at 7
[ 2.473335] usb-storage: waiting for device to settle before scanning
[ 2.750034] usb 4-1: new low speed USB device using uhci_hcd and
address 2
[ 2.934097] usb 4-1: configuration #1 chosen from 1 choice
[ 3.210031] usb 4-2: new low speed USB device using uhci_hcd and
address 3
[ 3.390153] usb 4-2: configuration #1 chosen from 1 choice
[ 6.110194] usb-storage: device scan complete
[ 6.110666] scsi 2:0:0:0: Direct-Access HP Photosmart D7200
1.00 PQ: 0 ANSI: 5
[ 6.111019] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.112515] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 7.080230] usb-storage: device scan complete
[ 7.081211] scsi 3:0:0:0: Direct-Access Generic USB SD Reader
1.00 PQ: 0 ANSI: 0
[ 7.081688] scsi 3:0:0:1: Direct-Access Generic USB CF Reader
1.01 PQ: 0 ANSI: 0
[ 7.082175] scsi 3:0:0:2: Direct-Access Generic USB xD/SM Reader
1.02 PQ: 0 ANSI: 0
[ 7.082689] scsi 3:0:0:3: Direct-Access Generic USB MS Reader
1.03 PQ: 0 ANSI: 0
[ 7.083055] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 7.083135] sd 3:0:0:1: Attached scsi generic sg4 type 0
[ 7.083213] sd 3:0:0:2: Attached scsi generic sg5 type 0
[ 7.083292] sd 3:0:0:3: Attached scsi generic sg6 type 0
[ 7.480367] usb-storage: device scan complete
[ 7.480883] scsi 4:0:0:0: Direct-Access Maxtor OneTouch
0125 PQ: 0 ANSI: 4
[ 7.481273] sd 4:0:0:0: Attached scsi generic sg7 type 0
[ 7.481863] sd 4:0:0:0: [sdg] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[ 7.482484] sd 4:0:0:0: [sdg] Write Protect is off
[ 7.482488] sd 4:0:0:0: [sdg] Mode Sense: 2d 08 00 00
[ 7.482492] sd 4:0:0:0: [sdg] Assuming drive cache: write through
[ 7.483734] sd 4:0:0:0: [sdg] Assuming drive cache: write through
[ 7.483739] sdg: sdg1 sdg2
[ 7.513488] sd 4:0:0:0: [sdg] Assuming drive cache: write through
[ 7.513493] sd 4:0:0:0: [sdg] Attached SCSI disk
[ 8.000450] udev: starting version 147
[ 8.007653] Adding 3903752k swap on /dev/sda5. Priority:-1 extents:1
across:3903752k
[ 8.032408] intel_rng: FWH not detected
[ 8.146694] nvidia: module license 'NVIDIA' taints kernel.
[ 8.146699] Disabling lock debugging due to kernel taint
[ 8.155725] parport_pc 00:09: reported by Plug and Play ACPI
[ 8.155773] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.159616] atl1c 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 8.159630] atl1c 0000:03:00.0: setting latency timer to 64
[ 8.159758] atl1c 0000:03:00.0: PME# disabled
[ 8.159763] atl1c 0000:03:00.0: PME# disabled
[ 8.166003] ppdev: user-space parallel port driver
[ 8.200589] usbcore: registered new interface driver hiddev
[ 8.215571] input: LITEON Technology USB Multimedia Keyboard as
/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
[ 8.215642] generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID
v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on
usb-0000:00:1d.2-1/input0
[ 8.231850] input: Logitech Optical USB Mouse as
/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
[ 8.231918] generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID
v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-2/input0
[ 8.231936] usbcore: registered new interface driver usbhid
[ 8.231939] usbhid: v2.6:USB HID core driver
[ 8.434656] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 8.434664] nvidia 0000:01:00.0: setting latency timer to 64
[ 8.434860] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36
Fri Aug 14 17:35:21 PDT 2009
[ 8.440391] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto
2 vid 0x03F0 pid 0x6911
[ 8.440417] usbcore: registered new interface driver usblp
[ 8.480062] EXT4-fs (sda1): internal journal on sda1:8
[ 8.481468] atl1c 0000:03:00.0: version 1.0.0.1-NAPI
[ 8.753929] EXT4-fs (sda6): barriers enabled
[ 8.777077] kjournald2 starting: pid 770, dev sda6:8, commit interval
5 seconds
[ 8.777360] EXT4-fs (sda6): internal journal on sda6:8
[ 8.777366] EXT4-fs (sda6): delayed allocation enabled
[ 8.777371] EXT4-fs: file extents enabled
[ 8.778027] EXT4-fs: mballoc enabled
[ 8.778042] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 9.151897] __ratelimit: 6 callbacks suppressed
[ 9.151900] type05 audit(1267028005.025:13):
operation="profile_replace" pid“5
name=/usr/share/gdm/guest-session/Xsession
[ 9.186788] alloc irq_desc for 27 on node 0
[ 9.186792] alloc kstat_irqs on node 0
[ 9.186807] atl1c 0000:03:00.0: irq 27 for MSI/MSI-X
[ 9.187427] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.189046] type05 audit(1267028005.055:14):
operation="profile_replace" pid”5 name=/sbin/dhclient3
[ 9.189754] type05 audit(1267028005.055:15):
operation="profile_replace" pid”5
name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 9.190163] type05 audit(1267028005.055:16):
operation="profile_replace" pid”5
name=/usr/lib/connman/scripts/dhclient-script
[ 9.204445] type05 audit(1267028005.075:17):
operation="profile_replace" pid”7 name=/usr/bin/evince
[ 9.216157] type05 audit(1267028005.085:18):
operation="profile_replace" pid”7 name=/usr/bin/evince-previewer
[ 9.222995] type05 audit(1267028005.095:19):
operation="profile_replace" pid”7 name=/usr/bin/evince-thumbnailer
[ 9.233060] type05 audit(1267028005.105:20):
operation="profile_replace" pid•2 name=/usr/lib/cups/backend/cups-pdf
[ 9.233899] type05 audit(1267028005.105:21):
operation="profile_replace" pid•2 name=/usr/sbin/cupsd
[ 9.236299] type05 audit(1267028005.105:22):
operation="profile_replace" pid•3 name=/usr/sbin/mysqld-akonadi
[ 9.863199] lp0: using parport0 (interrupt-driven).
[ 10.023424] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps
Full Duplex>
[ 10.023918] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.151258] eth0: no IPv6 routers present
[ 38.140023] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 39.140018] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 69.170022] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 70.130015] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 70.164339] usplash:353 freeing invalid memtype
ffffffffe1000000-ffffffffe1e00000
[ 100.130022] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 100.287881] sd 3:0:0:1: [sdd] Attached SCSI removable disk
[ 100.295290] sd 3:0:0:3: [sdf] Attached SCSI removable disk
[ 131.161274] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 162.130022] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 162.284663] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 193.150025] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 224.140019] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 224.294610] sd 3:0:0:2: [sde] Attached SCSI removable disk
[ 224.308006] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 224.321424] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 224.321639] CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
Please use
[ 224.321642] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack
module option or
[ 224.321644] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 224.364843] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 224.405356] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 224.405435] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 224.550889] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input5
[ 225.716429] usb 1-2: usbfs: interface 0 claimed by usblp while 'usb'
sets config #1
[ 235.170018] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 245.431271] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 251.608935] CPU0 attaching NULL sched-domain.
[ 251.608941] CPU1 attaching NULL sched-domain.
[ 251.641376] CPU0 attaching sched-domain:
[ 251.641381] domain 0: span 0-1 level MC
[ 251.641385] groups: 0 1
[ 251.641393] CPU1 attaching sched-domain:
[ 251.641397] domain 0: span 0-1 level MC
[ 251.641400] groups: 1 0
[ 323.170034] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 328.161285] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 339.160020] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 357.130036] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 370.160028] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 388.160030] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 401.160026] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 419.140024] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 432.161278] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 450.130031] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 463.160021] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 481.140040] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 494.200043] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 512.130133] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 525.161287] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 543.131278] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 556.130033] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 574.130029] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 574.452147] kjournald starting. Commit interval 5 seconds
[ 587.130031] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 605.140024] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 618.130033] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 636.131282] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 649.130035] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 667.131283] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 680.131282] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 690.402540] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 698.130163] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 708.403892] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 720.581305] INFO: task mount:2271 blocked for more than 120 seconds.
[ 720.581310] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 720.581314] mount D 0000000000000000 0 2271 2198
0x00000000
[ 720.581322] ffff88011c0cdae8 0000000000000082 ffff88011e754448
0000000000015880
[ 720.581329] ffff88011e7547c0 0000000000015880 0000000000015880
0000000000015880
[ 720.581335] 0000000000015880 ffff88011e7547c0 0000000000015880
0000000000015880
[ 720.581342] Call Trace:
[ 720.581355] [<ffffffff81146400>] ? sync_buffer+0x0/0x50
[ 720.581363] [<ffffffff81527cf8>] io_schedule+0x28/0x40
[ 720.581368] [<ffffffff8114643b>] sync_buffer+0x3b/0x50
[ 720.581373] [<ffffffff81528427>] __wait_on_bit+0x57/0x80
[ 720.581379] [<ffffffff81146400>] ? sync_buffer+0x0/0x50
[ 720.581384] [<ffffffff815284c3>] out_of_line_wait_on_bit+0x73/0x90
[ 720.581390] [<ffffffff81078a00>] ? wake_bit_function+0x0/0x40
[ 720.581396] [<ffffffff811463f6>] __wait_on_buffer+0x26/0x30
[ 720.581401] [<ffffffff811474eb>] sync_dirty_buffer+0x6b/0xf0
[ 720.581408] [<ffffffff8119878a>] T.851+0x5a/0x80
[ 720.581413] [<ffffffff81198ec8>] ext3_setup_super+0xf8/0x220
[ 720.581419] [<ffffffff811328c1>] ? d_instantiate+0x51/0x60
[ 720.581424] [<ffffffff8119af50>] ext3_fill_super+0xce0/0x1130
[ 720.581430] [<ffffffff811224df>] get_sb_bdev+0x16f/0x1b0
[ 720.581435] [<ffffffff8119a270>] ? ext3_fill_super+0x0/0x1130
[ 720.581441] [<ffffffff811199eb>] ? __alloc_percpu+0xb/0x10
[ 720.581447] [<ffffffff81196a63>] ext3_get_sb+0x13/0x20
[ 720.581451] [<ffffffff81121fa6>] vfs_kern_mount+0x76/0x180
[ 720.581456] [<ffffffff8112211d>] do_kern_mount+0x4d/0x130
[ 720.581461] [<ffffffff8113a4af>] do_new_mount+0x8f/0xc0
[ 720.581466] [<ffffffff8113af97>] do_mount+0x1f7/0x210
[ 720.581471] [<ffffffff8113b03f>] sys_mount+0x8f/0xe0
[ 720.581478] [<ffffffff81012002>] system_call_fastpath+0x16/0x1b
[ 724.681692] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 724.987226] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 727.131281] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 737.412182] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 756.130043] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 774.131287] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 787.133995] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 787.336921] sd 4:0:0:0: [sdg] Unhandled error code
[ 787.336928] sd 4:0:0:0: [sdg] Result: hostbyte=DID_ABORT
driverbyte=DRIVER_OK
[ 787.336934] end_request: I/O error, dev sdg, sector 63
[ 787.336941] __ratelimit: 3 callbacks suppressed
[ 787.336945] Buffer I/O error on device sdg1, logical block 0
[ 787.336948] lost page write due to I/O error on sdg1
[ 787.337021] EXT3 FS on sdg1, internal journal
[ 787.337030] EXT3-fs: mounted filesystem with writeback data mode.
[ 805.130568] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 815.401279] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 852.130681] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 883.131284] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
Vidéos High-Tech et Jeu Vidéo
Téléchargements
Vos réponses
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
Fabien LE LEZ
Le #21260301
On Wed, 24 Feb 2010 17:56:37 +0100, Patrick

J'ai depuis quelques jours des soucis avec mon USB.[...]
Le système est Ubuntu 9.10



As-tu essayé avec un système totalement différent ? Par exemple, une
Mandriva sur live-CD, voire carrément un BSD.
Ça permettrait au moins d'avoir une bonne idée de l'origine du
problème (matériel ou logiciel).
Patrick
Le #21261971
Le 24/02/2010 19:02, Fabien LE LEZ a écrit :
On Wed, 24 Feb 2010 17:56:37 +0100, Patrick

J'ai depuis quelques jours des soucis avec mon USB.[...]
Le système est Ubuntu 9.10



As-tu essayé avec un système totalement différent ? Par exemple, une
Mandriva sur live-CD, voire carrément un BSD.
Ça permettrait au moins d'avoir une bonne idée de l'origine du
problème (matériel ou logiciel).



Bonne idée. Voire carrément Windoze tant qu'à faire? Je n'ai pas été
jusqu'à installer cette chose sur mon PC, mais j'ai branché les mêmes
disque + imprimante avec les mêmes câbles sur un autre PC avec Windows,
et ça a marché sans problème (à part les partitions ext3 évidemment pas
accessibles).

Puis j'ai testé Mandriva One Live sur le PC posant problème, avec les
mêmes symptômes: erreurs disque, ou disque qui ne se monte pas.

usb 5-4: device not accepting address 3, error -71
...
usb 5-8: reset high speed USB device using ehci_hcd and address 8
usb 5-8: reset high speed USB device using ehci_hcd and address 8
sd 5:0:0:0: [sdh] Unhandled error code
sd 5:0:0:0: [sdh] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
end_request: I/O error, dev sdh, sector 0
Buffer I/O error on device sdh, logical block 0
usb 5-8: reset high speed USB device using ehci_hcd and address 8
usb 5-8: reset high speed USB device using ehci_hcd and address 8
...

Mais à mon avis ça ne prouve pas que c'est un problème matériel, puisque
cette Mandriva a le même noyau 2.6.31 que Ubuntu...
Est-ce qu'il faut que je teste un Linux plus ancien, ou bien avez-vous
une autre idée?...
Merci,

--
Patrick
Hugues
Le #21263601
Bonjour,

Ce cher Patrick
Bonjour,

J'ai depuis quelques jours des soucis avec mon USB. On dirait que
quand je ne branche que le disque externe, ça marche, mais dès que je
met l'imprimante, c'est la panique: le disque devient inaccessible, ou
alors hyper lent, et l'imprimante aussi fait n'importe quoi.

Le système est Ubuntu 9.10, noyau 2.6.31-19-generic, x86_64.

Je précise que les périphériques sont alimentés sur secteur.

Voici quelques infos, s'il y a un gourou dans l'assistance, je lui
serais très reconnaissant, car je suis un peu largué. Merci
d'avance...

$ lsusb

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 0d49:7310 Maxtor
Bus 001 Device 004: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 001 Device 002: ID 03f0:6911 Hewlett-Packard PhotoSmart D7200 series
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 004 Device 003: ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[ 774.131287] usb 1-4: reset high speed USB device using ehci_hcd and
address 4
[ 787.133995] usb 1-7: reset high speed USB device using ehci_hcd and
address 7
[ 787.336921] sd 4:0:0:0: [sdg] Unhandled error code
[ 787.336928] sd 4:0:0:0: [sdg] Result: hostbyte=DID_ABORT
driverbyte=DRIVER_OK
[ 787.336934] end_request: I/O error, dev sdg, sector 63
[ 787.336941] __ratelimit: 3 callbacks suppressed
[ 787.336945] Buffer I/O error on device sdg1, logical block 0
[ 787.336948] lost page write due to I/O error on sdg1
[ 787.337021] EXT3 FS on sdg1, internal journal
[ 787.337030] EXT3-fs: mounted filesystem with writeback data mode.



Les éléments récurrents dans le log sont le disque dur et le lecteur de
cartes mémoire (usb 1-4 et usb 1-7)...
Moi, je penche pour un problème de disque dur, ou de hub usb (le #1).

Mais essayez déjà sans le lecteur de cartes, ou branchez le ailleurs ?
Idem pour l'imprimante, essayez de la brancher ailleurs..


Bon courage,
--
Hugues Hiegel [http://www.hiegel.fr/~hugues/]
Patrick
Le #21265791
Le 25/02/2010 09:13, Hugues a écrit :

Les éléments récurrents dans le log sont le disque dur et le lecteur de
cartes mémoire (usb 1-4 et usb 1-7)...
Moi, je penche pour un problème de disque dur, ou de hub usb (le #1).

Mais essayez déjà sans le lecteur de cartes, ou branchez le ailleurs ?
Idem pour l'imprimante, essayez de la brancher ailleurs..



J'ai essayé les 3 ports USB en façade: même problème.

Le lecteur de cartes est intégré au PC donc on peut pas le retirer.

Par contre j'ai testé avec une autre imprimante, et là il ne semble plus
y avoir de problème (à part que cette autre imprimante est HS).

Mais l'imprimante posant problème marche très bien sur un autre PC Windows.

Cette imprimante a un lecteur de cartes intégré: est-ce que par hasard
il y aurait une raison pour que ça fasse un conflit avec celui du PC?

Auriez vous une autre idée pour me dépanner?

--
Patrick
Patrick
Le #21267131
Le 24/02/2010 19:02, Fabien LE LEZ a écrit :
On Wed, 24 Feb 2010 17:56:37 +0100, Patrick

J'ai depuis quelques jours des soucis avec mon USB.[...]
Le système est Ubuntu 9.10



As-tu essayé avec un système totalement différent ? Par exemple, une
Mandriva sur live-CD, voire carrément un BSD.
Ça permettrait au moins d'avoir une bonne idée de l'origine du
problème (matériel ou logiciel).



J'ai constaté le même problème avec Fedora 7 Live.

Quand l'imprimante est débranchée ça marche apparemment mieux, mais j'ai
quand même l'erreur suivante:
usb 5-7: device descriptor read/64, error -110

Est-ce que ça confirme que c'est matériel? Ça m'embêterait car le PC est
quasi neuf.

Merci,
--
Patrick
Sergio
Le #21267471
Patrick a écrit :

As-tu essayé avec un système totalement différent ? Par exemple, une
Mandriva sur live-CD, voire carrément un BSD.
Ça permettrait au moins d'avoir une bonne idée de l'origine du
problème (matériel ou logiciel).



J'ai constaté le même problème avec Fedora 7 Live.

Quand l'imprimante est débranchée ça marche apparemment mieux, mais j'ai
quand même l'erreur suivante:
usb 5-7: device descriptor read/64, error -110

Est-ce que ça confirme que c'est matériel? Ça m'embêterait car le PC est
quasi neuf.



Au fait t'as testé avec un LiveCD *32 bits* ?

--
Serge http://leserged.online.fr/
Mon blog: http://cahierdesergio.free.fr/
Soutenez le libre: http://www.framasoft.org
Patrick
Le #21267811
Le 25/02/2010 19:31, Sergio a écrit :

Au fait t'as testé avec un LiveCD *32 bits* ?



Oui.
pipantal
Le #21277091
Le 25/02/2010 15:18, Patrick a écrit :
Le 25/02/2010 09:13, Hugues a écrit :

Les éléments récurrents dans le log sont le disque dur et le lecteur de
cartes mémoire (usb 1-4 et usb 1-7)...
Moi, je penche pour un problème de disque dur, ou de hub usb (le #1).

Mais essayez déjà sans le lecteur de cartes, ou branchez le ailleurs ?
Idem pour l'imprimante, essayez de la brancher ailleurs..



J'ai essayé les 3 ports USB en façade: même problème.

Le lecteur de cartes est intégré au PC donc on peut pas le retirer.

Par contre j'ai testé avec une autre imprimante, et là il ne semble plus
y avoir de problème (à part que cette autre imprimante est HS).

Mais l'imprimante posant problème marche très bien sur un autre PC Windows.

Cette imprimante a un lecteur de cartes intégré: est-ce que par hasard
il y aurait une raison pour que ça fasse un conflit avec celui du PC?

Auriez vous une autre idée pour me dépanner?



as-tu au moins installé un driver qui va bien.
Patrick
Le #21278031
Le 27/02/2010 09:30, pipantal a écrit :

as-tu au moins installé un driver qui va bien.




Je n'ai rien installé, Ubuntu installe tout seul l'imprimante quand on
la branche. Le driver est hplip.

Quelques erreurs:

[ 1.790012] usb 1-4: device not accepting address 3, error -71
[ 9.680893] sd 5:0:0:0: [sdh] Unhandled error code
[ 9.680897] sd 5:0:0:0: [sdh] Result: hostbyte=DID_ERROR
driverbyte=DRIVER_OK
[ 9.680901] end_request: I/O error, dev sdh, sector 0

usb_id[3912]: unable to access
'/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host5/target5:0:0/5:0:0:0/block/sdb'

udev-configure-printer: unable to access
/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/usb/lp0

udev-configure-printer: unable to access
/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.2

...

Est-ce que ça vous inspire?
Merci,
--
Patrick
Publicité
Poster une réponse
Anonyme