Pb après install de Gnome
Le
Patrice OLIVER
Bonsoir la liste,
Je suis en SID, noyau 2.6.9 Debian.
Après avoir pas mal appris en utilisant fluxbox, puis xfce4, et
compte-tenu des performance de mon portable, j'ai tenté :
1) la désinstallation de fluxbox
2) la désinstallation de xfce4
3) l'installation de gnome
4) l'installation de gdm
au lancement de gdm, erreur, au lancement de startx, erreur.
Voici les erreurs de XF86.log.0 :
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) NVIDIA(1): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(1): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Pourtant, tout celà fonctionnait avec XFCE4
Si celà peut vous aider, voici mon XF86Config-4 :
# XF86Config-4 (XFree86 X server configuration file) generated by
dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edited by root@tethys, 03.01.2003.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
#FontPath "/usr/lib/X11/fonts/misc:unscaled"
#FontPath "/usr/lib/X11/fonts/75dpi:unscaled"
#FontPath "/usr/lib/X11/fonts/100dpi:unscaled"
#FontPath "/usr/lib/X11/fonts/Speedo"
#FontPath "/usr/lib/X11/fonts/Type1"
#FontPath "/usr/lib/X11/fonts/CID"
#FontPath "/usr/share/fonts/truetype"
#FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
#FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/lib/X11/fonts/misc"
#FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
#FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
FontPath "/usr/lib/X11/fonts/truetypes"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
#FontPath "/usr/share/fonts/truetype"
#FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
#FontPath "/usr/share/fonts/truetype/openoffice"
#FontPath "/usr/share/fonts/truetype/freefont"
#FontPath "/usr/share/fonts/type1"
#FontPath "/usr/share/fonts/type1/gsfonts"
ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "Module"
Load "dbe"
SubSection "extmod"
Option "xfree86-dga"
EndSubSection
Load "freetype"
# Load "xtt"
Load "type1"
Load "speedo"
# Load "dri"
Load "glx"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Internal Keyboard"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "AutoRepeat" "250 33.3"
EndSection
Section "InputDevice"
Identifier "Internal Mouse"
Driver "mouse"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "false"
Option "buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "VGA"
Driver "nvidia"
BusID "PCI:01:00:0"
VideoRam 131072
Screen 0
VendorName "NVidia"
#BoardName "GeForce4 4200 Go"
BoardName "GeForce FX Go5650"
Option "NoLogo" "0"
Option "TwinView" "0"
#Option "TwinViewOrientation" "Clone"
Option "NoRenderAccel" "0"
#Option "PageFlip" "1"
Option "DigitalVibrance" "2"
Option "SWCursor" "0"
Option "HWCursor" "1"
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "64"
Option "CursorShadowXOffset" "4"
Option "CursorShadowYOffset" "2"
EndSection
Section "Device"
Identifier "TVOut"
Driver "nvidia"
BusID "PCI:01:00:0"
VideoRam 131072
Screen 1
VendorName "NVidia"
#BoardName "GeForce4 4200 Go"
BoardName "GeForce FX Go5650"
Option "NoLogo" "0"
Option "TwinView" "1"
Option "TwinViewOrientation" "Clone"
# Option "TVOutFormat" "COMPOSITE"
Option "TVStandard" "PAL-B"
Option "ConnectedMonitor" "TV"
Option "MetaModes" "1280x1024@1280x1024,800x600@1280x1024"
EndSection
Section "Monitor"
Identifier "LCD"
ModelName "Dell LCD"
VendorName "Dell"
HorizSync 31.5-100.0
VertRefresh 30.0-90.0
Option "DPMS"
Option "FlatPanelProperties" "Scaling = aspect-scaled"
#Option "CalcAlgorithm" "CheckDesktopGemoetry"
#Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087
ModeLine "1680x1050" 221.31 1680 1752 2112 2256 1050 1052 1064
1090 #90Hz
#ModeLine "1680x1050" 210.42 1680 1712 2504 2536 1050
1070 1083 1103 #75Hz
#ModeLine "1680x1050" 154.20 1680 1712 2296 2328 1050
1071 1081 1103 #60Hz
EndSection
Section "Monitor"
Identifier "TV"
ModelName "PAL TV"
VendorName "ITT"
HorizSync 30-50
VertRefresh 60
EndSection
Section "Screen"
Identifier "Internal Screen"
Device "VGA"
Monitor "LCD"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1680x1050" "1400x1050" "1280x1024" "1280x800"
"1024x800" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1400x1050" "1280x1024" "1280x800"
"1024x800" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1400x1050" "1280x1024" "1280x800"
"1024x800" "800x600"
EndSubSection
EndSection
Section "Screen"
Identifier "External TV"
Device "TVOut"
Monitor "TV"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1280x1024" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
InputDevice "Internal Keyboard" "CoreKeyboard"
InputDevice "Internal Mouse" "SendCoreEvents"
InputDevice "USB Mouse" "CorePointer"
Screen "Internal Screen"
Screen "External TV" LeftOf "Internal Screen"
Option "Clone" "on"
Option "Xinerama" "off"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Merci d'avance de votre aide.
Patrice.
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Je suis en SID, noyau 2.6.9 Debian.
Après avoir pas mal appris en utilisant fluxbox, puis xfce4, et
compte-tenu des performance de mon portable, j'ai tenté :
1) la désinstallation de fluxbox
2) la désinstallation de xfce4
3) l'installation de gnome
4) l'installation de gdm
au lancement de gdm, erreur, au lancement de startx, erreur.
Voici les erreurs de XF86.log.0 :
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) NVIDIA(1): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(1): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Pourtant, tout celà fonctionnait avec XFCE4
Si celà peut vous aider, voici mon XF86Config-4 :
# XF86Config-4 (XFree86 X server configuration file) generated by
dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edited by root@tethys, 03.01.2003.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
#FontPath "/usr/lib/X11/fonts/misc:unscaled"
#FontPath "/usr/lib/X11/fonts/75dpi:unscaled"
#FontPath "/usr/lib/X11/fonts/100dpi:unscaled"
#FontPath "/usr/lib/X11/fonts/Speedo"
#FontPath "/usr/lib/X11/fonts/Type1"
#FontPath "/usr/lib/X11/fonts/CID"
#FontPath "/usr/share/fonts/truetype"
#FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
#FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/lib/X11/fonts/misc"
#FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
#FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
FontPath "/usr/lib/X11/fonts/truetypes"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
#FontPath "/usr/share/fonts/truetype"
#FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
#FontPath "/usr/share/fonts/truetype/openoffice"
#FontPath "/usr/share/fonts/truetype/freefont"
#FontPath "/usr/share/fonts/type1"
#FontPath "/usr/share/fonts/type1/gsfonts"
ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "Module"
Load "dbe"
SubSection "extmod"
Option "xfree86-dga"
EndSubSection
Load "freetype"
# Load "xtt"
Load "type1"
Load "speedo"
# Load "dri"
Load "glx"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Internal Keyboard"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "AutoRepeat" "250 33.3"
EndSection
Section "InputDevice"
Identifier "Internal Mouse"
Driver "mouse"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "false"
Option "buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "VGA"
Driver "nvidia"
BusID "PCI:01:00:0"
VideoRam 131072
Screen 0
VendorName "NVidia"
#BoardName "GeForce4 4200 Go"
BoardName "GeForce FX Go5650"
Option "NoLogo" "0"
Option "TwinView" "0"
#Option "TwinViewOrientation" "Clone"
Option "NoRenderAccel" "0"
#Option "PageFlip" "1"
Option "DigitalVibrance" "2"
Option "SWCursor" "0"
Option "HWCursor" "1"
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "64"
Option "CursorShadowXOffset" "4"
Option "CursorShadowYOffset" "2"
EndSection
Section "Device"
Identifier "TVOut"
Driver "nvidia"
BusID "PCI:01:00:0"
VideoRam 131072
Screen 1
VendorName "NVidia"
#BoardName "GeForce4 4200 Go"
BoardName "GeForce FX Go5650"
Option "NoLogo" "0"
Option "TwinView" "1"
Option "TwinViewOrientation" "Clone"
# Option "TVOutFormat" "COMPOSITE"
Option "TVStandard" "PAL-B"
Option "ConnectedMonitor" "TV"
Option "MetaModes" "1280x1024@1280x1024,800x600@1280x1024"
EndSection
Section "Monitor"
Identifier "LCD"
ModelName "Dell LCD"
VendorName "Dell"
HorizSync 31.5-100.0
VertRefresh 30.0-90.0
Option "DPMS"
Option "FlatPanelProperties" "Scaling = aspect-scaled"
#Option "CalcAlgorithm" "CheckDesktopGemoetry"
#Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087
ModeLine "1680x1050" 221.31 1680 1752 2112 2256 1050 1052 1064
1090 #90Hz
#ModeLine "1680x1050" 210.42 1680 1712 2504 2536 1050
1070 1083 1103 #75Hz
#ModeLine "1680x1050" 154.20 1680 1712 2296 2328 1050
1071 1081 1103 #60Hz
EndSection
Section "Monitor"
Identifier "TV"
ModelName "PAL TV"
VendorName "ITT"
HorizSync 30-50
VertRefresh 60
EndSection
Section "Screen"
Identifier "Internal Screen"
Device "VGA"
Monitor "LCD"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1680x1050" "1400x1050" "1280x1024" "1280x800"
"1024x800" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1400x1050" "1280x1024" "1280x800"
"1024x800" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1400x1050" "1280x1024" "1280x800"
"1024x800" "800x600"
EndSubSection
EndSection
Section "Screen"
Identifier "External TV"
Device "TVOut"
Monitor "TV"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1280x1024" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
InputDevice "Internal Keyboard" "CoreKeyboard"
InputDevice "Internal Mouse" "SendCoreEvents"
InputDevice "USB Mouse" "CorePointer"
Screen "Internal Screen"
Screen "External TV" LeftOf "Internal Screen"
Option "Clone" "on"
Option "Xinerama" "off"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Merci d'avance de votre aide.
Patrice.
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Poser une question
J'ai eu le même problème que j'ai résolu en installant le binaire
téléchargé chez nVidia. :-/
Cela dit, tout ne marche pas encore au poil :
* Unreal Tournament refuse de se lancer parce qu'il ne veut pas de
libGL.so.1 alors que je l'ai
binding libGL.so.1
appError called:
Could not load OpenGL library
* Quake 3 refuse de faire du bruit... mais ça doit venir des pilotes son,
et le log dit ça (sound system is muted [mais non !]), en cours de partie
le jeu se met à ramer à cause du son
* Frozen Bubble refuse aussi de se lancer, lui pour cause de
Can't load '/usr/lib/perl5/auto/SDL_perl/SDL_perl.so' for module SDL_perl:
libnvidia-tls.so.1: ne peut traiter les données TLS at
/usr/lib/perl/5.8/DynaLoader.pm line 225. at /usr/lib/perl5/SDL.pm line 9
Tout ça marchait avant la réinstallation en début d'année. :-/
nicolas patrois : pts noir asocial
--
SPROTCH !
P : Non, y a rien de plus immonde que de chier sur la moquette...
M : Pas d'accord... A pire... Chier sous la moquette...
H : ?!!
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Merci du renseignement.
Patrice.
:)
nicolas wrote:
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Section "Module"
# Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
si tu utilise glx tu dois desactiver GLcore et dri quant à savoir
pkoi.... c'est une bonne question, je ne sais plus non plus pourquoi
j'ai fais ca, doc nvidia ou forum quelqconque
Patrice OLIVER a écrit :
--
Erwann PENCREACH
__________________________________
/ Sans l'illusion, où irons-nous ?
| |
-+- Honoré de Balzac -+- /
----------------------------------
^__^
(oo)_______
(__) )/
||----w |
|| ||
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Je sais pour GLCore et DRI, et c'est le vieux UT, pas UT2003. M'enfin je
ne suis pas pressé.
nicolas patrois : pts noir asocial
--
SPROTCH !
P : Non, y a rien de plus immonde que de chier sur la moquette...
M : Pas d'accord... A pire... Chier sous la moquette...
H : ?!!
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Résolu, il lui manquait l'interface lo correctement configurée (adresse
127.0.0.1). Pourquoi lo ne se lance pas toute seule au démarrage ? :-/
Non résolu.
Résolu, cf. UT.
Soyons fous, essayons UT2003.
nicolas patrois : pts noir asocial
--
SPROTCH !
P : Non, y a rien de plus immonde que de chier sur la moquette...
M : Pas d'accord... A pire... Chier sous la moquette...
H : ?!!
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact