plus de son après SUSPEND

Le
Serge Cavailles
Bonjour,

J'ai installé Etch ces jours ci depuis un CD netinstall sur un portabl=
e
Toshiba Satellite P200-12W (Intel® Pentium Core™ Duo T2080 Ã=
  1.73 GHz).

La mise en oeuvre des possibilités d'économie d'énergie est =
importante pour
cette machine destinée à une installation personnelle solaire non=
raccordée
au réseau EDF.

Pour le choix des paquets, j'ai laissé faire l'installeur avec le prof=
il
portable.

Au début j'ai du son (lecture d'un .avi).
A ma surprise, sous KDE, j'ai du activer l'ACPI pour pouvoir disposer des
options suspend2ram/2hd. Est-ce normal, ou faut-il y voir un lien avec mon=

problème?

Toujours est-il qu'un fois activée l'une ou l'autre des options
suspend2ram/suspend2hd, je n'ai plus de son au réveil du système.=
Il suffit
de relancer alsaconf en validant les options proposées pour retrouver =
le
son, mais pour l'usage d'un primo utilisateur de PC curieux des vertus du
pingouin, j'aurai bien aimé pouvoir lui proposer un truc plus propre. =
:/

Le problème est indépendant du gestionnaire de fenêtre (test=
é avec KDE et
Gnome) et des applis de lecture utilisées (Mplayer, Noatun, Totem). Il=

existe aussi avec un fichier wav et RythmBox.


Des recherches sur le web m'ont amené à envisager un problèm=
e lié à l'ACPI,
ce qui m'a conduit à tenter ce qui est expliqué ici:
http://gentoo-wiki.com/HOWTO_Fix_Common_ACPI_Problems

J'ai donc vérifié la DSDT en décompilant et recompilant la D=
SDT avec iasl:
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 58 Optimizations

L'étape suivante conseillée dans ce cas est de vérifier si d=
es mentions au
système d'exploitation existent dans l'asl. La page citée prÃ=
©cédemment
parle de nombre de lettres du nom. Rien de tel dans mon cas, mais on trouve=

cependant:

> If (CondRefOf (_OSI, Local0))
> {
> If (_OSI ("Linux"))
> {
> Store (0x03E8, OSYS)
> Store (Zero, ECDY)
> }
>
> If (_OSI ("Windows 2001"))
> {
> Store (0x07D1, OSYS)
> }
>
> If (_OSI ("Windows 2001 SP1"))
> {
> Store (0x07D1, OSYS)
> }
> If (_OSI ("Windows 2001 SP2"))
> {
> Store (0x07D2, OSYS)
> }
>
> If (_OSI ("Windows 2006"))
> {
> Store (0x07D6, OSYS)
> }
>
> If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
> {
> TRAP (0x3D)
> }
> }
>
> If (LGreaterEqual (OSYS, 0x07D0))
> {
> Store (One, PRM0)
> If (LGreaterEqual (OSYS, 0x07D1))
> {
> Store (0x03, PRM0)
> }
> }
> Else
> {
> Store (Zero, PRM0)
> }

Je ne sais ce que représentent ces variables (OSYS, ECDY, PRM0) ni si =
je
peux les modifier (mettre OSYS==0x07D6) sans risque pour le matéri=
el.
Peut-il y avoir des raisons valables à cette différenciation d'OS?


Par ailleurs, il existe une mise à jour du Bios chez le constructeur, =
mais
comme ça fonctionne sous Vista, à moins d'une suppression de la
différenciation des valeurs dans la DSDT (hum!), je ne suis pas convai=
ncu
que ça change quelque chose.

En fait je ne suis d'ailleurs même pas certain d'être sur la bonn=
e piste. :D

Un lsmod avant et après le suspend n'affiche pas de différences.
Pas de messages particuliers dans le syslog à la reprise.

Une idée?

Merci d'avance




# dmesg | grep [AP]C[PI]
--
BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS)
ACPI: RSDP (v000 TOSCPL ) @ 0x000f75e0
ACPI: RSDT (v001 TOSCPL TOSCPL00 0x06040000 LTP 0x00000000) @ 0x7f6877a8
ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fc78
ACPI: SLIC (v001 TOSCPL TOSCPL00 0x06040000 LOHR 0x00000000) @ 0x7f68fcec
ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe62
ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68feca
ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68ff02
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7f68ffd8
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x7f68ff70
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x7f688ec0
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x7f68882e
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7f687d88
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7f687ce2
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6877fc
ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20060608) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: 2 duplicate APIC table ignored.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
ACPI: Core revision 20060707
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06)
(try 'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
PCI: Bridge: 0000:00:1c.1
PCI: Bridge: 0000:00:1c.2
PCI: Bus 7, cardbus bridge: 0000:06:04.0
PCI: Bridge: 0000:00:1e.0
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: (supports S0 S3 S4 S5)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[dc005000-dc00=
57ff]
Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:06:04.3[C] -> GSI 18 (level, low) -> IRQ 185
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
--

J'ai essayé 'pci=assign-busses' et 'pci=routeirq' comme conseill=
é, pas de
changement.




#lspci -v
--
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT=

Express Memory Controller Hub (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GM=
L
Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at dc100000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 1800 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dc200000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0=

Enable-
Capabilities: [d0] Power Management version 2

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0
Memory at dc180000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definitio=
n
Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff03
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at dc440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0=

Enable-
Capabilities: [70] Express Unknown type IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port=

1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d6000000-d7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0=

Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device=

ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port=

2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0=

Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device=

ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)

00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port=

3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d5ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0=

Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device=

ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1=

(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at 1820 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2=

(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at 1840 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3=

(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 185
I/O ports at 1860 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4=

(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 177
I/O ports at 1880 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
Memory at dc444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=56
I/O behind bridge: 00005000-00005fff
Memory behind bridge: dc000000-dc0fffff
Prefetchable memory behind bridge: 0000000088000000-0000000089ffffff
Capabilities: [50] Subsystem: Toshiba America Info Systems Unknown device=

ff00

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridg=
e
(rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information

00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial=

ATA Storage Controller IDE (rev 02) (prog-if 80 [Master])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 18b0 [size=16]
Capabilities: [70] Power Management version 2

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev=

02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: medium devsel, IRQ 233
I/O ports at 18c0 [size=32]

04:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device
001c (rev 01)
Subsystem: Askey Computer Corp. Unknown device 7128
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d8000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0=

Enable-
Capabilities: [60] Express Legacy Endpoint IRQ 0
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI
Express Fast Ethernet controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast
Ethernet controller
Flags: bus master, fast devsel, latency 0, IRQ 185
I/O ports at 4000 [size=256]
Memory at da000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at d4000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1=

Enable-
Capabilities: [60] Express Endpoint IRQ 0
Capabilities: [84] Vendor Specific Information
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Virtual Channel
Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-00-01
Capabilities: [154] Power Budgeting

06:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 168, IRQ 177
Memory at dc006000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 88000000-89fff000 (prefetchable)
Memory window 1: 8a000000-8bfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001

06:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE=

1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 32, IRQ 169
Memory at dc005000 (32-bit, non-prefetchable) [size=2K]
Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2

06:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card
Reader (SD/MMC/MS/MS PRO/xD)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 10
Memory at dc004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

06:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA
Standard Compliant SD Host Controller (prog-if 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 185
Memory at dc005800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
--

Bonne journée,
--
Serge
Vidéos High-Tech et Jeu Vidéo
Téléchargements
Vos réponses
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
nono
Le #9587071
--=-eLUGB5uQj+C2sn+QW5tQ
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

Le mercredi 15 août 2007 à 02:29 +0200, Serge Cavailles a éc rit :
Bonjour,

J'ai installé Etch ces jours ci depuis un CD netinstall sur un porta ble
Toshiba Satellite P200-12W (Intel® Pentium Core™ Duo T2080 à 1.73 GHz).

La mise en oeuvre des possibilités d'économie d'énergie es t importante pour
cette machine destinée à une installation personnelle solaire n on raccordée
au réseau EDF.



Désolé, je n'ai pas de réponse à ton problème (man que de compétences)
mais ta solution énergétique m'intéresse. As-tu un plan de t on
installation ?

nono

--
nono sur jabber: nono at jabber-fr dot net
les pages à nono: http://zenith.noel.free.fr/
le projet Einar FR: http://www.linux-france.org/~jcnoel/index.html

--=-eLUGB5uQj+C2sn+QW5tQ
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: Ceci est une partie de message
=?ISO-8859-1?Q?numériquement?= =?ISO-8859-1?Q?_signée?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQBGwrVmsuWx6lZRvlsRAngnAJ4rBcaLMr3/O0QPx+mWdgX/0HvsIgCgoK5q
1DYAzP4YwsKB8G43jR+xAHA =SkgO
-----END PGP SIGNATURE-----

--=-eLUGB5uQj+C2sn+QW5tQ--


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Andreï V. Fomitchev
Le #9587041
--0-1727813385-1187169782=:29572
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Salut.

J'ai eu exactement le même problème sur mon portable Dell (chip SigmaTel HD Audio) quand Etch était testing: plus de son après un suspend... Ma solution était plus brutale: je faisais rmmod et insmod du module snd intel et le son revenait.
Depuis, je suis resté en testing (donc lenny) et après un dist-upgrade qui a installé le noyau 2.6.21, je n'ai plus le problème...
Certes, j'ai pas de solutions, mais regarde les différences entre les modules du noyau en version 2.6.18 et 2.6.21, ils ont sûrement fixé quelques bricoles


Serge Cavailles
J'ai installé Etch ces jours ci depuis un CD netinstall sur un portable
Toshiba Satellite P200-12W (Intel® Pentium Core™ Duo T2080 à 1.73 GHz).

La mise en oeuvre des possibilités d'économie d'énergie est importante pour
cette machine destinée à une installation personnelle solaire non raccordée
au réseau EDF.

Pour le choix des paquets, j'ai laissé faire l'installeur avec le profil
portable.

Au début j'ai du son (lecture d'un .avi).
A ma surprise, sous KDE, j'ai du activer l'ACPI pour pouvoir disposer des
options suspend2ram/2hd. Est-ce normal, ou faut-il y voir un lien avec mon
problème?

Toujours est-il qu'un fois activée l'une ou l'autre des options
suspend2ram/suspend2hd, je n'ai plus de son au réveil du système. Il suffit
de relancer alsaconf en validant les options proposées pour retrouver le
son, mais pour l'usage d'un primo utilisateur de PC curieux des vertus du
pingouin, j'aurai bien aimé pouvoir lui proposer un truc plus propre. :/

Le problème est indépendant du gestionnaire de fenêtre (testé avec KDE et
Gnome) et des applis de lecture utilisées (Mplayer, Noatun, Totem). Il
existe aussi avec un fichier wav et RythmBox.


Des recherches sur le web m'ont amené à envisager un problème lié à l'ACPI,
ce qui m'a conduit à tenter ce qui est expliqué ici:
http://gentoo-wiki.com/HOWTO_Fix_Common_ACPI_Problems

J'ai donc vérifié la DSDT en décompilant et recompilant la DSDT avec iasl:
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 58 Optimizations

L'étape suivante conseillée dans ce cas est de vérifier si des mentions au
système d'exploitation existent dans l'asl. La page citée précédemment
parle de nombre de lettres du nom. Rien de tel dans mon cas, mais on trouve
cependant:

If (CondRefOf (_OSI, Local0))
{
If (_OSI ("Linux"))
{
Store (0x03E8, OSYS)
Store (Zero, ECDY)
}

If (_OSI ("Windows 2001"))
{
Store (0x07D1, OSYS)
}

If (_OSI ("Windows 2001 SP1"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP2"))
{
Store (0x07D2, OSYS)
}

If (_OSI ("Windows 2006"))
{
Store (0x07D6, OSYS)
}

If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
{
TRAP (0x3D)
}
}

If (LGreaterEqual (OSYS, 0x07D0))
{
Store (One, PRM0)
If (LGreaterEqual (OSYS, 0x07D1))
{
Store (0x03, PRM0)
}
}
Else
{
Store (Zero, PRM0)
}



Je ne sais ce que représentent ces variables (OSYS, ECDY, PRM0) ni si je
peux les modifier (mettre OSYS==0x07D6) sans risque pour le matériel.
Peut-il y avoir des raisons valables à cette différenciation d'OS?


Par ailleurs, il existe une mise à jour du Bios chez le constructeur, mais
comme ça fonctionne sous Vista, à moins d'une suppression de la
différenciation des valeurs dans la DSDT (hum!), je ne suis pas convaincu
que ça change quelque chose.

En fait je ne suis d'ailleurs même pas certain d'être sur la bonne piste. :D

Un lsmod avant et après le suspend n'affiche pas de différences.
Pas de messages particuliers dans le syslog à la reprise.

Une idée?

Merci d'avance




# dmesg | grep [AP]C[PI]
--------------------------------------------
BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS)
ACPI: RSDP (v000 TOSCPL ) @ 0x000f75e0
ACPI: RSDT (v001 TOSCPL TOSCPL00 0x06040000 LTP 0x00000000) @ 0x7f6877a8
ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fc78
ACPI: SLIC (v001 TOSCPL TOSCPL00 0x06040000 LOHR 0x00000000) @ 0x7f68fcec
ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe62
ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68feca
ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68ff02
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7f68ffd8
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x7f68ff70
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x7f688ec0
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x7f68882e
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7f687d88
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7f687ce2
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6877fc
ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20060608) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: 2 duplicate APIC table ignored.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
ACPI: Core revision 20060707
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06)
(try 'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
PCI: Bridge: 0000:00:1c.1
PCI: Bridge: 0000:00:1c.2
PCI: Bus 7, cardbus bridge: 0000:06:04.0
PCI: Bridge: 0000:00:1e.0
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: (supports S0 S3 S4 S5)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[dc005000-dc0057ff]
Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:06:04.3[C] -> GSI 18 (level, low) -> IRQ 185
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
--------------------------------------------

J'ai essayé 'pci=assign-busses' et 'pci=routeirq' comme conseillé, pas de
changement.




#lspci -v
--------------------------------------------
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT
Express Memory Controller Hub (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at dc100000 (32-bit, non-prefetchable) [sizeQ2K]
I/O ports at 1800 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size%6M]
Memory at dc200000 (32-bit, non-prefetchable) [size%6K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Capabilities: [d0] Power Management version 2

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0
Memory at dc180000 (32-bit, non-prefetchable) [sizeQ2K]
Capabilities: [d0] Power Management version 2

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff03
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at dc440000 (64-bit, non-prefetchable) [sizeK]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [70] Express Unknown type IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary, secondary, subordinate, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d6000000-d7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary, secondary, subordinate, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)

00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary, secondary, subordinate, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d5ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at 1820 [size2]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at 1840 [size2]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 185
I/O ports at 1860 [size2]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 177
I/O ports at 1880 [size2]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
Memory at dc444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary, secondary, subordinate
, sec-latencyV
I/O behind bridge: 00005000-00005fff
Memory behind bridge: dc000000-dc0fffff
Prefetchable memory behind bridge: 0000000088000000-0000000089ffffff
Capabilities: [50] Subsystem: Toshiba America Info Systems Unknown device
ff00

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information

00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial
ATA Storage Controller IDE (rev 02) (prog-if 80 [Master])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233
I/O ports at
I/O ports at
I/O ports at
I/O ports at
I/O ports at 18b0 [size]
Capabilities: [70] Power Management version 2

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: medium devsel, IRQ 233
I/O ports at 18c0 [size2]

04:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device
001c (rev 01)
Subsystem: Askey Computer Corp. Unknown device 7128
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d8000000 (64-bit, non-prefetchable) [sizedK]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Enable-
Capabilities: [60] Express Legacy Endpoint IRQ 0
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI
Express Fast Ethernet controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast
Ethernet controller
Flags: bus master, fast devsel, latency 0, IRQ 185
I/O ports at 4000 [size%6]
Memory at da000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at d4000000 [disabled] [size8K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1
Enable-
Capabilities: [60] Express Endpoint IRQ 0
Capabilities: [84] Vendor Specific Information
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Virtual Channel
Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-00-01
Capabilities: [154] Power Budgeting

06:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 168, IRQ 177
Memory at dc006000 (32-bit, non-prefetchable) [size=4K]
Bus: primary, secondary, subordinate
, sec-latency6
Memory window 0: 88000000-89fff000 (prefetchable)
Memory window 1: 8a000000-8bfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001

06:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE
1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 32, IRQ 169
Memory at dc005000 (32-bit, non-prefetchable) [size=2K]
Memory at dc000000 (32-bit, non-prefetchable) [sizeK]
Capabilities: [44] Power Management version 2

06:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card
Reader (SD/MMC/MS/MS PRO/xD)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 10
Memory at dc004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

06:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA
Standard Compliant SD Host Controller (prog-if 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 185
Memory at dc005800 (32-bit, non-prefetchable) [size%6]
Capabilities: [80] Power Management version 2
--------------------------------------------

Bonne journée,
--
Serge





---------------------------------
Libérez votre adresse mail de votre fournisseur d'accès - Choisissez Yahoo! Mail
--0-1727813385-1187169782=:29572
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Salut. importante pour Il OSYS)<br>&gt; }<br>&gt;<br>&gt; If (_OSI ("Windows 2001 SP1"))<br>&gt; {<br>&gt; Store (0x07D1, OSYS)<br>&gt; }<br>&gt; If (_OSI ("Windows 2001 SP2"))<br>&gt; {<br>&gt; Store (0x07D2, OSYS)<br>&gt; }<br>&gt; <br>&gt; If (_OSI ("Windows 2006"))<br>&gt; {<br>&gt; Store (0x07D6, OSYS)<br>&gt; }<br>&gt; <br>&gt; If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))<br>&gt; {<br>&gt; TRAP (0x3D)<br>&gt; }<br>&gt; }<br>&gt; <br>&gt; If (LGreaterEqual (OSYS, 0x07D0))<br>&gt; {<br>&gt; Store (One, PRM0)<br>&gt; If (LGreaterEqual (OSYS, 0x07D1))<br>&gt; {<br>&gt; Store (0x03, PRM0)<br>&gt; }<br>&gt; }<br>&gt; Else<br>&gt; {<br>&gt; Store (Zero, PRM0)<br>&gt; }<br><br>Je ne sais ce que représentent ces variables (OSYS, ECDY, PRM0) ni si je <br>peux les modifier (mettre OSYS==0x07D6) sans risque pour le matériel.
0x0000005a) @ 0x7f68fc78<br>ACPI: SLIC (v001 TOSCPL TOSCPL00 0x06040000 LOHR 0x00000000) @ 0x7f68fcec<br>ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe62<br>ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68feca<br>ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68ff02<br>ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7f68ffd8<br>ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ <br>0x7f68ff70<br>ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x7f688ec0<br>ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x7f68882e<br>ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7f687d88<br>ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7f687ce2<br>ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6877fc<br>ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20060608) @ 0x00000000<br>ACPI: PM-Timer IO Port:
0x1008 (0000:00) Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 timer of device 0000:00:1c.2 to 64 device 0000:05:00.0 to 64 device 0000:00:1d.7 0000:00:02.0[A] -&gt; GSI 16 (level, low) -&gt; IRQ 177 [size%6M] (prog-if 00 [Normal decode]) Prefetchable memory behind bridge: 00000000d4000000-00000000d5ffffff Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 <br>(prog-if 01 [Subtractive decode])<br> Flags: bus master, fast devsel, latency 0<br> Bus: primary, secondary, subordinate
, sec-latencyV Channel Controller<br> Subsystem: Toshiba America Info Systems Unknown device ff00<br> Flags: bus master, medium devsel, latency 168, IRQ 177<br> Memory at dc006000 (32-bit, non-prefetchable) [size=4K]<br> Bus: primary, secondary, subordinate
, sec-latency6 (SD/MMC/MS/MS PRO/xD)

<hr size="1">
Libérez votre adresse mail de votre fournisseur d'accès - --0-1727813385-1187169782=:29572--


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Hugues LARRIVE
Le #9587001
This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--------------enigE2E0A6D40EDBBE5549BFC5BF
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

Serge Cavailles a écrit :
Bonjour,

J'ai installé Etch ces jours ci depuis un CD netinstall sur un por table
Toshiba Satellite P200-12W (Intel® Pentium Core™ Duo T2080 à 1.73 GHz).

La mise en oeuvre des possibilités d'économie d'énergie est importante pour
cette machine destinée à une installation personnelle solaire non raccordée
au réseau EDF.

Pour le choix des paquets, j'ai laissé faire l'installeur avec le profil
portable.

Au début j'ai du son (lecture d'un .avi).
A ma surprise, sous KDE, j'ai du activer l'ACPI pour pouvoir disposer d es
options suspend2ram/2hd. Est-ce normal, ou faut-il y voir un lien avec mon
problème?

Toujours est-il qu'un fois activée l'une ou l'autre des options
suspend2ram/suspend2hd, je n'ai plus de son au réveil du systè me. Il suffit
de relancer alsaconf en validant les options proposées pour retrou ver le
son, mais pour l'usage d'un primo utilisateur de PC curieux des vertus du
pingouin, j'aurai bien aimé pouvoir lui proposer un truc plus prop re. :/



Ou plus précisément de recharger les modules de la carte son et alsa...
Le problème est indépendant du gestionnaire de fenêtre ( testé avec KDE et
Gnome) et des applis de lecture utilisées (Mplayer, Noatun, Totem) . Il
existe aussi avec un fichier wav et RythmBox.


Des recherches sur le web m'ont amené à envisager un problà ¨me lié à l'ACPI,
ce qui m'a conduit à tenter ce qui est expliqué ici:
http://gentoo-wiki.com/HOWTO_Fix_Common_ACPI_Problems



Tu n'étais pas loin dutout :
http://gentoo-wiki.com/HOWTO_Software_Suspend_v2#Modules_and_Startup_scri pts
Bon ça c'est pour le suspend2hd et ça fonctionne parfaitement s ur mon
portable, je n'ai pas essayé mais il me semble qu'il existe des
mécanismes assez proches pour le suspend2ram (peut-être mê me un fichier
de conf commun).
J'ai donc vérifié la DSDT en décompilant et recompilant la DSDT avec iasl:
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 58 Optimizations

L'étape suivante conseillée dans ce cas est de vérifier si des mentions au
système d'exploitation existent dans l'asl. La page citée prà ©cédemment
parle de nombre de lettres du nom. Rien de tel dans mon cas, mais on tr ouve
cependant:


If (CondRefOf (_OSI, Local0))
{
If (_OSI ("Linux"))
{
Store (0x03E8, OSYS)
Store (Zero, ECDY)
}

If (_OSI ("Windows 2001"))
{
Store (0x07D1, OSYS)
}

If (_OSI ("Windows 2001 SP1"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP2"))
{
Store (0x07D2, OSYS)
}

If (_OSI ("Windows 2006"))
{
Store (0x07D6, OSYS)
}

If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
{
TRAP (0x3D)
}
}

If (LGreaterEqual (OSYS, 0x07D0))
{
Store (One, PRM0)
If (LGreaterEqual (OSYS, 0x07D1))
{
Store (0x03, PRM0)
}
}
Else
{
Store (Zero, PRM0)
}




Je ne sais ce que représentent ces variables (OSYS, ECDY, PRM0) ni si je
peux les modifier (mettre OSYS==0x07D6) sans risque pour le maté riel.
Peut-il y avoir des raisons valables à cette différenciation d'OS?


Par ailleurs, il existe une mise à jour du Bios chez le constructe ur, mais
comme ça fonctionne sous Vista, à moins d'une suppression de la
différenciation des valeurs dans la DSDT (hum!), je ne suis pas co nvaincu
que ça change quelque chose.

En fait je ne suis d'ailleurs même pas certain d'être sur la bonne piste. :D

Un lsmod avant et après le suspend n'affiche pas de différenc es.
Pas de messages particuliers dans le syslog à la reprise.

Une idée?

Merci d'avance




# dmesg | grep [AP]C[PI]
--------------------------------------------
BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS)
ACPI: RSDP (v000 TOSCPL ) @ 0x000f75e0
ACPI: RSDT (v001 TOSCPL TOSCPL00 0x06040000 LTP 0x00000000) @ 0x7f6877 a8
ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fc 78
ACPI: SLIC (v001 TOSCPL TOSCPL00 0x06040000 LOHR 0x00000000) @ 0x7f68fc ec
ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe 62
ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe ca
ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68ff 02
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7f68ff d8
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x7f68ff70
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x7f688e c0
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x7f6888 2e
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7f687d 88
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7f687c e2
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6877 fc
ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20060608) @ 0x000000 00
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: 2 duplicate APIC table ignored.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
ACPI: Core revision 20060707
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06)
(try 'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disa bled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disa bled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
PCI: Bridge: 0000:00:1c.1
PCI: Bridge: 0000:00:1c.2
PCI: Bus 7, cardbus bridge: 0000:06:04.0
PCI: Bridge: 0000:00:1e.0
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: (supports S0 S3 S4 S5)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[dc005000- dc0057ff]
Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:06:04.3[C] -> GSI 18 (level, low) -> IRQ 185
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
--------------------------------------------

J'ai essayé 'pci=assign-busses' et 'pci=routeirq' comme consei llé, pas de
changement.




#lspci -v
--------------------------------------------
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 9 45GT
Express Memory Controller Hub (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/9 40GML
Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at dc100000 (32-bit, non-prefetchable) [sizeQ2K]
I/O ports at 1800 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size%6M]
Memory at dc200000 (32-bit, non-prefetchable) [size%6K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable-
Capabilities: [d0] Power Management version 2

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0
Memory at dc180000 (32-bit, non-prefetchable) [sizeQ2K]
Capabilities: [d0] Power Management version 2

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Defin ition
Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff03
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at dc440000 (64-bit, non-prefetchable) [sizeK]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue= 0/0
Enable-
Capabilities: [70] Express Unknown type IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary, secondary, subordinate, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d6000000-d7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary, secondary, subordinate, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)

00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary, secondary, subordinate, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d5ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at 1820 [size2]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at 1840 [size2]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 185
I/O ports at 1860 [size2]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 177
I/O ports at 1880 [size2]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHC I
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
Memory at dc444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary, secondary, subordinate , sec-latencyV
I/O behind bridge: 00005000-00005fff
Memory behind bridge: dc000000-dc0fffff
Prefetchable memory behind bridge: 0000000088000000-0000000089ffffff
Capabilities: [50] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00

00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface B ridge
(rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information

00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Ser ial
ATA Storage Controller IDE (rev 02) (prog-if 80 [Master])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 18b0 [size]
Capabilities: [70] Power Management version 2

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: medium devsel, IRQ 233
I/O ports at 18c0 [size2]

04:00.0 Ethernet controller: Atheros Communications, Inc. Unknown devic e
001c (rev 01)
Subsystem: Askey Computer Corp. Unknown device 7128
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d8000000 (64-bit, non-prefetchable) [sizedK]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable-
Capabilities: [60] Express Legacy Endpoint IRQ 0
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel

05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E P CI
Express Fast Ethernet controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast
Ethernet controller
Flags: bus master, fast devsel, latency 0, IRQ 185
I/O ports at 4000 [size%6]
Memory at da000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at d4000000 [disabled] [size8K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue= 0/1
Enable-
Capabilities: [60] Express Endpoint IRQ 0
Capabilities: [84] Vendor Specific Information
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Virtual Channel
Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-00-01
Capabilities: [154] Power Budgeting

06:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 168, IRQ 177
Memory at dc006000 (32-bit, non-prefetchable) [size=4K]
Bus: primary, secondary, subordinate , sec-latency6
Memory window 0: 88000000-89fff000 (prefetchable)
Memory window 1: 8a000000-8bfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001

06:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE
1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 32, IRQ 169
Memory at dc005000 (32-bit, non-prefetchable) [size=2K]
Memory at dc000000 (32-bit, non-prefetchable) [sizeK]
Capabilities: [44] Power Management version 2

06:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Ca rd
Reader (SD/MMC/MS/MS PRO/xD)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 10
Memory at dc004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

06:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA
Standard Compliant SD Host Controller (prog-if 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 185
Memory at dc005800 (32-bit, non-prefetchable) [size%6]
Capabilities: [80] Power Management version 2
--------------------------------------------

Bonne journée,






--------------enigE2E0A6D40EDBBE5549BFC5BF
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFGwtvqNdTZuHWpgVIRAnPVAJ0drAOLu8uM7DUtsluz7rl9/gGFzwCaA3uI
Pxmt2xLpkmF4IzDAKBba+AU =Imj8
-----END PGP SIGNATURE-----

--------------enigE2E0A6D40EDBBE5549BFC5BF--


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Serge Cavailles
Le #9769731
Le mercredi 15 août 2007 10:12, nono a écrit :
Le mercredi 15 août 2007 à 02:29 +0200, Serge Cavailles a à ©crit :
> Bonjour,



Bonjour,

> J'ai installé Etch ces jours ci depuis un CD netinstall sur un por table
> Toshiba Satellite P200-12W (Intel® Pentium Core™ Duo T2080 à 1.73 GHz).
>
> La mise en oeuvre des possibilités d'économie d'énergie est importante
> pour cette machine destinée à une installation personnelle so laire non
> raccordée au réseau EDF.

Désolé, je n'ai pas de réponse à ton problème (m anque de compétences)
mais ta solution énergétique m'intéresse. As-tu un plan de ton
installation ?



Non, je n'ai pas de plan, mais une installation solaire pour un particulier,
pour ce que j'ai pu en voir (en simple curieux) ça se résume à  

2 fils en provenance des panneaux de capteurs.
2 fils en provenance des batteries
2 fils vers l'utilisation

Le tout relié à un boitier de régulation qui gère l'ens emble.

Si ça peut répondre à ta question :)

@+
--
Serge
Serge Cavailles
Le #9769581
Bon[soir|jour]

Le mercredi 15 août 2007 12:56, Hugues LARRIVE a écrit :
Serge Cavailles a écrit :
> Toujours est-il qu'un fois activée l'une ou l'autre des options
> suspend2ram/suspend2hd, je n'ai plus de son au réveil du système. Il
> suffit de relancer alsaconf en validant les options proposées pour
> retrouver le son, mais pour l'usage d'un primo utilisateur de PC
> curieux des vertus du pingouin, j'aurai bien aimé pouvoir lui proposer
> un truc plus propre. :/

Ou plus précisément de recharger les modules de la carte son et alsa. ..



Euh... oui, par exemple. Suffisait d'y penser, hein? :D

[snip]
http://gentoo-wiki.com/HOWTO_Software_Suspend_v2#Modules_and_Startup_scri
pts Bon ça c'est pour le suspend2hd et ça fonctionne parfaitement sur mon
portable, je n'ai pas essayé mais il me semble qu'il existe des
mécanismes assez proches pour le suspend2ram (peut-être même un fic hier
de conf commun).



Oui effectivement, suspend2 semble gérer les 2 modes 2hd et 2ram.

J'ai ajouté une ligne contenant les drivers qui sont déchargés lors d 'un
alsaconf au fichier /etc/hibernate/common.cinf, section modules:

UnloadModules snd-hda-intel snd-hda-codec snd-pcm-oss snd-mixer-oss
snd-pcm snd-timer snd-page-alloc

Mais aucun progrès n'est constaté sur le suspend2hd.
Si quelqu'un voit ce que j'ai pu oublier...

Merci pour ton aide.

Bonne [nuit|journée]
--
Serge
Publicité
Poster une réponse
Anonyme