Bonjour,
J'ai installé Etch ces jours ci depuis un CD netinstall sur un porta ble
Toshiba Satellite P200-12W (Intel® Pentium Core⢠Duo T2080 à 1.73 GHz).
La mise en oeuvre des possibilités d'économie d'énergie es t importante pour
cette machine destinée à une installation personnelle solaire n on raccordée
au réseau EDF.
Bonjour,
J'ai installé Etch ces jours ci depuis un CD netinstall sur un porta ble
Toshiba Satellite P200-12W (Intel® Pentium Core⢠Duo T2080 à 1.73 GHz).
La mise en oeuvre des possibilités d'économie d'énergie es t importante pour
cette machine destinée à une installation personnelle solaire n on raccordée
au réseau EDF.
Bonjour,
J'ai installé Etch ces jours ci depuis un CD netinstall sur un porta ble
Toshiba Satellite P200-12W (Intel® Pentium Core⢠Duo T2080 à 1.73 GHz).
La mise en oeuvre des possibilités d'économie d'énergie es t importante pour
cette machine destinée à une installation personnelle solaire n on raccordée
au réseau EDF.
If (CondRefOf (_OSI, Local0))
{
If (_OSI ("Linux"))
{
Store (0x03E8, OSYS)
Store (Zero, ECDY)
}
If (_OSI ("Windows 2001"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP1"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP2"))
{
Store (0x07D2, OSYS)
}
If (_OSI ("Windows 2006"))
{
Store (0x07D6, OSYS)
}
If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
{
TRAP (0x3D)
}
}
If (LGreaterEqual (OSYS, 0x07D0))
{
Store (One, PRM0)
If (LGreaterEqual (OSYS, 0x07D1))
{
Store (0x03, PRM0)
}
}
Else
{
Store (Zero, PRM0)
}
If (CondRefOf (_OSI, Local0))
{
If (_OSI ("Linux"))
{
Store (0x03E8, OSYS)
Store (Zero, ECDY)
}
If (_OSI ("Windows 2001"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP1"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP2"))
{
Store (0x07D2, OSYS)
}
If (_OSI ("Windows 2006"))
{
Store (0x07D6, OSYS)
}
If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
{
TRAP (0x3D)
}
}
If (LGreaterEqual (OSYS, 0x07D0))
{
Store (One, PRM0)
If (LGreaterEqual (OSYS, 0x07D1))
{
Store (0x03, PRM0)
}
}
Else
{
Store (Zero, PRM0)
}
If (CondRefOf (_OSI, Local0))
{
If (_OSI ("Linux"))
{
Store (0x03E8, OSYS)
Store (Zero, ECDY)
}
If (_OSI ("Windows 2001"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP1"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP2"))
{
Store (0x07D2, OSYS)
}
If (_OSI ("Windows 2006"))
{
Store (0x07D6, OSYS)
}
If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
{
TRAP (0x3D)
}
}
If (LGreaterEqual (OSYS, 0x07D0))
{
Store (One, PRM0)
If (LGreaterEqual (OSYS, 0x07D1))
{
Store (0x03, PRM0)
}
}
Else
{
Store (Zero, PRM0)
}
Bonjour,
J'ai installé Etch ces jours ci depuis un CD netinstall sur un por table
Toshiba Satellite P200-12W (Intel® Pentium Core⢠Duo T2080 à 1.73 GHz).
La mise en oeuvre des possibilités d'économie d'énergie est importante pour
cette machine destinée à une installation personnelle solaire non raccordée
au réseau EDF.
Pour le choix des paquets, j'ai laissé faire l'installeur avec le profil
portable.
Au début j'ai du son (lecture d'un .avi).
A ma surprise, sous KDE, j'ai du activer l'ACPI pour pouvoir disposer d es
options suspend2ram/2hd. Est-ce normal, ou faut-il y voir un lien avec mon
problème?
Toujours est-il qu'un fois activée l'une ou l'autre des options
suspend2ram/suspend2hd, je n'ai plus de son au réveil du systè me. Il suffit
de relancer alsaconf en validant les options proposées pour retrou ver le
son, mais pour l'usage d'un primo utilisateur de PC curieux des vertus du
pingouin, j'aurai bien aimé pouvoir lui proposer un truc plus prop re. :/
Le problème est indépendant du gestionnaire de fenêtre ( testé avec KDE et
Gnome) et des applis de lecture utilisées (Mplayer, Noatun, Totem) . Il
existe aussi avec un fichier wav et RythmBox.
Des recherches sur le web m'ont amené à envisager un problà ¨me lié à l'ACPI,
ce qui m'a conduit à tenter ce qui est expliqué ici:
http://gentoo-wiki.com/HOWTO_Fix_Common_ACPI_Problems
J'ai donc vérifié la DSDT en décompilant et recompilant la DSDT avec iasl:
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 58 Optimizations
L'étape suivante conseillée dans ce cas est de vérifier si des mentions au
système d'exploitation existent dans l'asl. La page citée prà ©cédemment
parle de nombre de lettres du nom. Rien de tel dans mon cas, mais on tr ouve
cependant:If (CondRefOf (_OSI, Local0))
{
If (_OSI ("Linux"))
{
Store (0x03E8, OSYS)
Store (Zero, ECDY)
}
If (_OSI ("Windows 2001"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP1"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP2"))
{
Store (0x07D2, OSYS)
}
If (_OSI ("Windows 2006"))
{
Store (0x07D6, OSYS)
}
If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
{
TRAP (0x3D)
}
}
If (LGreaterEqual (OSYS, 0x07D0))
{
Store (One, PRM0)
If (LGreaterEqual (OSYS, 0x07D1))
{
Store (0x03, PRM0)
}
}
Else
{
Store (Zero, PRM0)
}
Je ne sais ce que représentent ces variables (OSYS, ECDY, PRM0) ni si je
peux les modifier (mettre OSYS==0x07D6) sans risque pour le maté riel.
Peut-il y avoir des raisons valables à cette différenciation d'OS?
Par ailleurs, il existe une mise à jour du Bios chez le constructe ur, mais
comme ça fonctionne sous Vista, à moins d'une suppression de la
différenciation des valeurs dans la DSDT (hum!), je ne suis pas co nvaincu
que ça change quelque chose.
En fait je ne suis d'ailleurs même pas certain d'être sur la bonne piste. :D
Un lsmod avant et après le suspend n'affiche pas de différenc es.
Pas de messages particuliers dans le syslog à la reprise.
Une idée?
Merci d'avance
# dmesg | grep [AP]C[PI]
--------------------------------------------
BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS)
ACPI: RSDP (v000 TOSCPL ) @ 0x000f75e0
ACPI: RSDT (v001 TOSCPL TOSCPL00 0x06040000 LTP 0x00000000) @ 0x7f6877 a8
ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fc 78
ACPI: SLIC (v001 TOSCPL TOSCPL00 0x06040000 LOHR 0x00000000) @ 0x7f68fc ec
ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe 62
ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe ca
ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68ff 02
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7f68ff d8
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x7f68ff70
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x7f688e c0
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x7f6888 2e
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7f687d 88
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7f687c e2
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6877 fc
ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20060608) @ 0x000000 00
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: 2 duplicate APIC table ignored.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
ACPI: Core revision 20060707
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06)
(try 'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disa bled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disa bled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
PCI: Bridge: 0000:00:1c.1
PCI: Bridge: 0000:00:1c.2
PCI: Bus 7, cardbus bridge: 0000:06:04.0
PCI: Bridge: 0000:00:1e.0
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: (supports S0 S3 S4 S5)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[dc005000- dc0057ff]
Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:06:04.3[C] -> GSI 18 (level, low) -> IRQ 185
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
--------------------------------------------
J'ai essayé 'pci=assign-busses' et 'pci=routeirq' comme consei llé, pas de
changement.
#lspci -v
--------------------------------------------
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 9 45GT
Express Memory Controller Hub (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/9 40GML
Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at dc100000 (32-bit, non-prefetchable) [sizeQ2K]
I/O ports at 1800 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size%6M]
Memory at dc200000 (32-bit, non-prefetchable) [size%6K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable-
Capabilities: [d0] Power Management version 2
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0
Memory at dc180000 (32-bit, non-prefetchable) [sizeQ2K]
Capabilities: [d0] Power Management version 2
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Defin ition
Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff03
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at dc440000 (64-bit, non-prefetchable) [sizeK]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue= 0/0
Enable-
Capabilities: [70] Express Unknown type IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary , secondary, subordinate, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d6000000-d7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary , secondary, subordinate, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary , secondary, subordinate, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d5ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at 1820 [size2]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at 1840 [size2]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 185
I/O ports at 1860 [size2]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 177
I/O ports at 1880 [size2]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHC I
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
Memory at dc444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary , secondary, subordinate
, sec-latencyV
I/O behind bridge: 00005000-00005fff
Memory behind bridge: dc000000-dc0fffff
Prefetchable memory behind bridge: 0000000088000000-0000000089ffffff
Capabilities: [50] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface B ridge
(rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Ser ial
ATA Storage Controller IDE (rev 02) (prog-if 80 [Master])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 18b0 [size]
Capabilities: [70] Power Management version 2
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: medium devsel, IRQ 233
I/O ports at 18c0 [size2]
04:00.0 Ethernet controller: Atheros Communications, Inc. Unknown devic e
001c (rev 01)
Subsystem: Askey Computer Corp. Unknown device 7128
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d8000000 (64-bit, non-prefetchable) [sizedK]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable-
Capabilities: [60] Express Legacy Endpoint IRQ 0
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E P CI
Express Fast Ethernet controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast
Ethernet controller
Flags: bus master, fast devsel, latency 0, IRQ 185
I/O ports at 4000 [size%6]
Memory at da000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at d4000000 [disabled] [size8K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue= 0/1
Enable-
Capabilities: [60] Express Endpoint IRQ 0
Capabilities: [84] Vendor Specific Information
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Virtual Channel
Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-00-01
Capabilities: [154] Power Budgeting
06:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 168, IRQ 177
Memory at dc006000 (32-bit, non-prefetchable) [size=4K]
Bus: primary, secondary, subordinate
, sec-latency6
Memory window 0: 88000000-89fff000 (prefetchable)
Memory window 1: 8a000000-8bfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001
06:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE
1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 32, IRQ 169
Memory at dc005000 (32-bit, non-prefetchable) [size=2K]
Memory at dc000000 (32-bit, non-prefetchable) [sizeK]
Capabilities: [44] Power Management version 2
06:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Ca rd
Reader (SD/MMC/MS/MS PRO/xD)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 10
Memory at dc004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
06:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA
Standard Compliant SD Host Controller (prog-if 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 185
Memory at dc005800 (32-bit, non-prefetchable) [size%6]
Capabilities: [80] Power Management version 2
--------------------------------------------
Bonne journée,
Bonjour,
J'ai installé Etch ces jours ci depuis un CD netinstall sur un por table
Toshiba Satellite P200-12W (Intel® Pentium Core⢠Duo T2080 à 1.73 GHz).
La mise en oeuvre des possibilités d'économie d'énergie est importante pour
cette machine destinée à une installation personnelle solaire non raccordée
au réseau EDF.
Pour le choix des paquets, j'ai laissé faire l'installeur avec le profil
portable.
Au début j'ai du son (lecture d'un .avi).
A ma surprise, sous KDE, j'ai du activer l'ACPI pour pouvoir disposer d es
options suspend2ram/2hd. Est-ce normal, ou faut-il y voir un lien avec mon
problème?
Toujours est-il qu'un fois activée l'une ou l'autre des options
suspend2ram/suspend2hd, je n'ai plus de son au réveil du systè me. Il suffit
de relancer alsaconf en validant les options proposées pour retrou ver le
son, mais pour l'usage d'un primo utilisateur de PC curieux des vertus du
pingouin, j'aurai bien aimé pouvoir lui proposer un truc plus prop re. :/
Le problème est indépendant du gestionnaire de fenêtre ( testé avec KDE et
Gnome) et des applis de lecture utilisées (Mplayer, Noatun, Totem) . Il
existe aussi avec un fichier wav et RythmBox.
Des recherches sur le web m'ont amené à envisager un problà ¨me lié à l'ACPI,
ce qui m'a conduit à tenter ce qui est expliqué ici:
http://gentoo-wiki.com/HOWTO_Fix_Common_ACPI_Problems
J'ai donc vérifié la DSDT en décompilant et recompilant la DSDT avec iasl:
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 58 Optimizations
L'étape suivante conseillée dans ce cas est de vérifier si des mentions au
système d'exploitation existent dans l'asl. La page citée prà ©cédemment
parle de nombre de lettres du nom. Rien de tel dans mon cas, mais on tr ouve
cependant:
If (CondRefOf (_OSI, Local0))
{
If (_OSI ("Linux"))
{
Store (0x03E8, OSYS)
Store (Zero, ECDY)
}
If (_OSI ("Windows 2001"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP1"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP2"))
{
Store (0x07D2, OSYS)
}
If (_OSI ("Windows 2006"))
{
Store (0x07D6, OSYS)
}
If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
{
TRAP (0x3D)
}
}
If (LGreaterEqual (OSYS, 0x07D0))
{
Store (One, PRM0)
If (LGreaterEqual (OSYS, 0x07D1))
{
Store (0x03, PRM0)
}
}
Else
{
Store (Zero, PRM0)
}
Je ne sais ce que représentent ces variables (OSYS, ECDY, PRM0) ni si je
peux les modifier (mettre OSYS==0x07D6) sans risque pour le maté riel.
Peut-il y avoir des raisons valables à cette différenciation d'OS?
Par ailleurs, il existe une mise à jour du Bios chez le constructe ur, mais
comme ça fonctionne sous Vista, à moins d'une suppression de la
différenciation des valeurs dans la DSDT (hum!), je ne suis pas co nvaincu
que ça change quelque chose.
En fait je ne suis d'ailleurs même pas certain d'être sur la bonne piste. :D
Un lsmod avant et après le suspend n'affiche pas de différenc es.
Pas de messages particuliers dans le syslog à la reprise.
Une idée?
Merci d'avance
# dmesg | grep [AP]C[PI]
--------------------------------------------
BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS)
ACPI: RSDP (v000 TOSCPL ) @ 0x000f75e0
ACPI: RSDT (v001 TOSCPL TOSCPL00 0x06040000 LTP 0x00000000) @ 0x7f6877 a8
ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fc 78
ACPI: SLIC (v001 TOSCPL TOSCPL00 0x06040000 LOHR 0x00000000) @ 0x7f68fc ec
ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe 62
ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe ca
ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68ff 02
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7f68ff d8
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x7f68ff70
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x7f688e c0
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x7f6888 2e
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7f687d 88
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7f687c e2
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6877 fc
ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20060608) @ 0x000000 00
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: 2 duplicate APIC table ignored.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
ACPI: Core revision 20060707
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06)
(try 'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disa bled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disa bled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
PCI: Bridge: 0000:00:1c.1
PCI: Bridge: 0000:00:1c.2
PCI: Bus 7, cardbus bridge: 0000:06:04.0
PCI: Bridge: 0000:00:1e.0
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: (supports S0 S3 S4 S5)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[dc005000- dc0057ff]
Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:06:04.3[C] -> GSI 18 (level, low) -> IRQ 185
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
--------------------------------------------
J'ai essayé 'pci=assign-busses' et 'pci=routeirq' comme consei llé, pas de
changement.
#lspci -v
--------------------------------------------
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 9 45GT
Express Memory Controller Hub (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/9 40GML
Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at dc100000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 1800 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at dc200000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable-
Capabilities: [d0] Power Management version 2
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0
Memory at dc180000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Defin ition
Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff03
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at dc440000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue= 0/0
Enable-
Capabilities: [70] Express Unknown type IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d6000000-d7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d5ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at 1820 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at 1840 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 185
I/O ports at 1860 [size=32]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 177
I/O ports at 1880 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHC I
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
Memory at dc444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=56
I/O behind bridge: 00005000-00005fff
Memory behind bridge: dc000000-dc0fffff
Prefetchable memory behind bridge: 0000000088000000-0000000089ffffff
Capabilities: [50] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface B ridge
(rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Ser ial
ATA Storage Controller IDE (rev 02) (prog-if 80 [Master])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 18b0 [size=16]
Capabilities: [70] Power Management version 2
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: medium devsel, IRQ 233
I/O ports at 18c0 [size=32]
04:00.0 Ethernet controller: Atheros Communications, Inc. Unknown devic e
001c (rev 01)
Subsystem: Askey Computer Corp. Unknown device 7128
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d8000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable-
Capabilities: [60] Express Legacy Endpoint IRQ 0
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E P CI
Express Fast Ethernet controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast
Ethernet controller
Flags: bus master, fast devsel, latency 0, IRQ 185
I/O ports at 4000 [size=256]
Memory at da000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at d4000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue= 0/1
Enable-
Capabilities: [60] Express Endpoint IRQ 0
Capabilities: [84] Vendor Specific Information
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Virtual Channel
Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-00-01
Capabilities: [154] Power Budgeting
06:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 168, IRQ 177
Memory at dc006000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 88000000-89fff000 (prefetchable)
Memory window 1: 8a000000-8bfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001
06:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE
1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 32, IRQ 169
Memory at dc005000 (32-bit, non-prefetchable) [size=2K]
Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
06:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Ca rd
Reader (SD/MMC/MS/MS PRO/xD)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 10
Memory at dc004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
06:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA
Standard Compliant SD Host Controller (prog-if 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 185
Memory at dc005800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
--------------------------------------------
Bonne journée,
Bonjour,
J'ai installé Etch ces jours ci depuis un CD netinstall sur un por table
Toshiba Satellite P200-12W (Intel® Pentium Core⢠Duo T2080 à 1.73 GHz).
La mise en oeuvre des possibilités d'économie d'énergie est importante pour
cette machine destinée à une installation personnelle solaire non raccordée
au réseau EDF.
Pour le choix des paquets, j'ai laissé faire l'installeur avec le profil
portable.
Au début j'ai du son (lecture d'un .avi).
A ma surprise, sous KDE, j'ai du activer l'ACPI pour pouvoir disposer d es
options suspend2ram/2hd. Est-ce normal, ou faut-il y voir un lien avec mon
problème?
Toujours est-il qu'un fois activée l'une ou l'autre des options
suspend2ram/suspend2hd, je n'ai plus de son au réveil du systè me. Il suffit
de relancer alsaconf en validant les options proposées pour retrou ver le
son, mais pour l'usage d'un primo utilisateur de PC curieux des vertus du
pingouin, j'aurai bien aimé pouvoir lui proposer un truc plus prop re. :/
Le problème est indépendant du gestionnaire de fenêtre ( testé avec KDE et
Gnome) et des applis de lecture utilisées (Mplayer, Noatun, Totem) . Il
existe aussi avec un fichier wav et RythmBox.
Des recherches sur le web m'ont amené à envisager un problà ¨me lié à l'ACPI,
ce qui m'a conduit à tenter ce qui est expliqué ici:
http://gentoo-wiki.com/HOWTO_Fix_Common_ACPI_Problems
J'ai donc vérifié la DSDT en décompilant et recompilant la DSDT avec iasl:
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 58 Optimizations
L'étape suivante conseillée dans ce cas est de vérifier si des mentions au
système d'exploitation existent dans l'asl. La page citée prà ©cédemment
parle de nombre de lettres du nom. Rien de tel dans mon cas, mais on tr ouve
cependant:If (CondRefOf (_OSI, Local0))
{
If (_OSI ("Linux"))
{
Store (0x03E8, OSYS)
Store (Zero, ECDY)
}
If (_OSI ("Windows 2001"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP1"))
{
Store (0x07D1, OSYS)
}
If (_OSI ("Windows 2001 SP2"))
{
Store (0x07D2, OSYS)
}
If (_OSI ("Windows 2006"))
{
Store (0x07D6, OSYS)
}
If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
{
TRAP (0x3D)
}
}
If (LGreaterEqual (OSYS, 0x07D0))
{
Store (One, PRM0)
If (LGreaterEqual (OSYS, 0x07D1))
{
Store (0x03, PRM0)
}
}
Else
{
Store (Zero, PRM0)
}
Je ne sais ce que représentent ces variables (OSYS, ECDY, PRM0) ni si je
peux les modifier (mettre OSYS==0x07D6) sans risque pour le maté riel.
Peut-il y avoir des raisons valables à cette différenciation d'OS?
Par ailleurs, il existe une mise à jour du Bios chez le constructe ur, mais
comme ça fonctionne sous Vista, à moins d'une suppression de la
différenciation des valeurs dans la DSDT (hum!), je ne suis pas co nvaincu
que ça change quelque chose.
En fait je ne suis d'ailleurs même pas certain d'être sur la bonne piste. :D
Un lsmod avant et après le suspend n'affiche pas de différenc es.
Pas de messages particuliers dans le syslog à la reprise.
Une idée?
Merci d'avance
# dmesg | grep [AP]C[PI]
--------------------------------------------
BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS)
ACPI: RSDP (v000 TOSCPL ) @ 0x000f75e0
ACPI: RSDT (v001 TOSCPL TOSCPL00 0x06040000 LTP 0x00000000) @ 0x7f6877 a8
ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fc 78
ACPI: SLIC (v001 TOSCPL TOSCPL00 0x06040000 LOHR 0x00000000) @ 0x7f68fc ec
ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe 62
ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68fe ca
ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7f68ff 02
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7f68ff d8
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x7f68ff70
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x7f688e c0
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x7f6888 2e
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7f687d 88
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7f687c e2
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6877 fc
ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20060608) @ 0x000000 00
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: 2 duplicate APIC table ignored.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
ACPI: Core revision 20060707
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06)
(try 'pci=assign-busses')
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disa bled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disa bled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
PCI: Bridge: 0000:00:1c.1
PCI: Bridge: 0000:00:1c.2
PCI: Bus 7, cardbus bridge: 0000:06:04.0
PCI: Bridge: 0000:00:1e.0
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: (supports S0 S3 S4 S5)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.3 to 64
ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[dc005000- dc0057ff]
Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:06:04.3[C] -> GSI 18 (level, low) -> IRQ 185
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 225
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
--------------------------------------------
J'ai essayé 'pci=assign-busses' et 'pci=routeirq' comme consei llé, pas de
changement.
#lspci -v
--------------------------------------------
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 9 45GT
Express Memory Controller Hub (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/9 40GML
Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at dc100000 (32-bit, non-prefetchable) [sizeQ2K]
I/O ports at 1800 [size=8]
Memory at c0000000 (32-bit, prefetchable) [size%6M]
Memory at dc200000 (32-bit, non-prefetchable) [size%6K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable-
Capabilities: [d0] Power Management version 2
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff04
Flags: bus master, fast devsel, latency 0
Memory at dc180000 (32-bit, non-prefetchable) [sizeQ2K]
Capabilities: [d0] Power Management version 2
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Defin ition
Audio Controller (rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff03
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at dc440000 (64-bit, non-prefetchable) [sizeK]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue= 0/0
Enable-
Capabilities: [70] Express Unknown type IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [130] Unknown (5)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary , secondary, subordinate, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d6000000-d7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d1ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
2 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary , secondary, subordinate, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000d2000000-00000000d3ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port
3 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary , secondary, subordinate, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d5ffffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable+
Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel
Capabilities: [180] Unknown (5)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at 1820 [size2]
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at 1840 [size2]
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 185
I/O ports at 1860 [size2]
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4
(rev 02) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 177
I/O ports at 1880 [size2]
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHC I
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0, IRQ 225
Memory at dc444000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
(prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary , secondary, subordinate
, sec-latencyV
I/O behind bridge: 00005000-00005fff
Memory behind bridge: dc000000-dc0fffff
Prefetchable memory behind bridge: 0000000088000000-0000000089ffffff
Capabilities: [50] Subsystem: Toshiba America Info Systems Unknown dev ice
ff00
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface B ridge
(rev 02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Ser ial
ATA Storage Controller IDE (rev 02) (prog-if 80 [Master])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 18b0 [size]
Capabilities: [70] Power Management version 2
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev
02)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: medium devsel, IRQ 233
I/O ports at 18c0 [size2]
04:00.0 Ethernet controller: Atheros Communications, Inc. Unknown devic e
001c (rev 01)
Subsystem: Askey Computer Corp. Unknown device 7128
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at d8000000 (64-bit, non-prefetchable) [sizedK]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue= 0/0
Enable-
Capabilities: [60] Express Legacy Endpoint IRQ 0
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E P CI
Express Fast Ethernet controller (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast
Ethernet controller
Flags: bus master, fast devsel, latency 0, IRQ 185
I/O ports at 4000 [size%6]
Memory at da000000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at d4000000 [disabled] [size8K]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue= 0/1
Enable-
Capabilities: [60] Express Endpoint IRQ 0
Capabilities: [84] Vendor Specific Information
Capabilities: [100] Advanced Error Reporting
Capabilities: [12c] Virtual Channel
Capabilities: [148] Device Serial Number 36-81-ec-10-00-00-00-01
Capabilities: [154] Power Budgeting
06:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 168, IRQ 177
Memory at dc006000 (32-bit, non-prefetchable) [size=4K]
Bus: primary, secondary, subordinate
, sec-latency6
Memory window 0: 88000000-89fff000 (prefetchable)
Memory window 1: 8a000000-8bfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001
06:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE
1394 Host Controller (prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 32, IRQ 169
Memory at dc005000 (32-bit, non-prefetchable) [size=2K]
Memory at dc000000 (32-bit, non-prefetchable) [sizeK]
Capabilities: [44] Power Management version 2
06:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Ca rd
Reader (SD/MMC/MS/MS PRO/xD)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 10
Memory at dc004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
06:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA
Standard Compliant SD Host Controller (prog-if 01)
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 57, IRQ 185
Memory at dc005800 (32-bit, non-prefetchable) [size%6]
Capabilities: [80] Power Management version 2
--------------------------------------------
Bonne journée,
Le mercredi 15 août 2007 à 02:29 +0200, Serge Cavailles a à ©crit :
> Bonjour,
> J'ai installé Etch ces jours ci depuis un CD netinstall sur un por table
> Toshiba Satellite P200-12W (Intel® Pentium Core⢠Duo T2080 à 1.73 GHz).
>
> La mise en oeuvre des possibilités d'économie d'énergie est importante
> pour cette machine destinée à une installation personnelle so laire non
> raccordée au réseau EDF.
Désolé, je n'ai pas de réponse à ton problème (m anque de compétences)
mais ta solution énergétique m'intéresse. As-tu un plan de ton
installation ?
Le mercredi 15 août 2007 à 02:29 +0200, Serge Cavailles a à ©crit :
> Bonjour,
> J'ai installé Etch ces jours ci depuis un CD netinstall sur un por table
> Toshiba Satellite P200-12W (Intel® Pentium Core⢠Duo T2080 à 1.73 GHz).
>
> La mise en oeuvre des possibilités d'économie d'énergie est importante
> pour cette machine destinée à une installation personnelle so laire non
> raccordée au réseau EDF.
Désolé, je n'ai pas de réponse à ton problème (m anque de compétences)
mais ta solution énergétique m'intéresse. As-tu un plan de ton
installation ?
Le mercredi 15 août 2007 à 02:29 +0200, Serge Cavailles a à ©crit :
> Bonjour,
> J'ai installé Etch ces jours ci depuis un CD netinstall sur un por table
> Toshiba Satellite P200-12W (Intel® Pentium Core⢠Duo T2080 à 1.73 GHz).
>
> La mise en oeuvre des possibilités d'économie d'énergie est importante
> pour cette machine destinée à une installation personnelle so laire non
> raccordée au réseau EDF.
Désolé, je n'ai pas de réponse à ton problème (m anque de compétences)
mais ta solution énergétique m'intéresse. As-tu un plan de ton
installation ?
Serge Cavailles a écrit :
> Toujours est-il qu'un fois activée l'une ou l'autre des options
> suspend2ram/suspend2hd, je n'ai plus de son au réveil du système. Il
> suffit de relancer alsaconf en validant les options proposées pour
> retrouver le son, mais pour l'usage d'un primo utilisateur de PC
> curieux des vertus du pingouin, j'aurai bien aimé pouvoir lui proposer
> un truc plus propre. :/
Ou plus précisément de recharger les modules de la carte son et alsa. ..
http://gentoo-wiki.com/HOWTO_Software_Suspend_v2#Modules_and_Startup_scri
pts Bon ça c'est pour le suspend2hd et ça fonctionne parfaitement sur mon
portable, je n'ai pas essayé mais il me semble qu'il existe des
mécanismes assez proches pour le suspend2ram (peut-être même un fic hier
de conf commun).
Serge Cavailles a écrit :
> Toujours est-il qu'un fois activée l'une ou l'autre des options
> suspend2ram/suspend2hd, je n'ai plus de son au réveil du système. Il
> suffit de relancer alsaconf en validant les options proposées pour
> retrouver le son, mais pour l'usage d'un primo utilisateur de PC
> curieux des vertus du pingouin, j'aurai bien aimé pouvoir lui proposer
> un truc plus propre. :/
Ou plus précisément de recharger les modules de la carte son et alsa. ..
http://gentoo-wiki.com/HOWTO_Software_Suspend_v2#Modules_and_Startup_scri
pts Bon ça c'est pour le suspend2hd et ça fonctionne parfaitement sur mon
portable, je n'ai pas essayé mais il me semble qu'il existe des
mécanismes assez proches pour le suspend2ram (peut-être même un fic hier
de conf commun).
Serge Cavailles a écrit :
> Toujours est-il qu'un fois activée l'une ou l'autre des options
> suspend2ram/suspend2hd, je n'ai plus de son au réveil du système. Il
> suffit de relancer alsaconf en validant les options proposées pour
> retrouver le son, mais pour l'usage d'un primo utilisateur de PC
> curieux des vertus du pingouin, j'aurai bien aimé pouvoir lui proposer
> un truc plus propre. :/
Ou plus précisément de recharger les modules de la carte son et alsa. ..
http://gentoo-wiki.com/HOWTO_Software_Suspend_v2#Modules_and_Startup_scri
pts Bon ça c'est pour le suspend2hd et ça fonctionne parfaitement sur mon
portable, je n'ai pas essayé mais il me semble qu'il existe des
mécanismes assez proches pour le suspend2ram (peut-être même un fic hier
de conf commun).