Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
est-ce que le serveur de secours est controlleur de domaine ? Si oui est-ce
du domaine SBS ?
Quels sont les serveurs dns configurés sur le serveur membre ?
"Franck G." wrote in message
news:Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
est-ce que le serveur de secours est controlleur de domaine ? Si oui est-ce
du domaine SBS ?
Quels sont les serveurs dns configurés sur le serveur membre ?
"Franck G." <FranckG@discussions.microsoft.com> wrote in message
news:582E2048-A592-49F8-BB4E-96F317C02447@microsoft.com...
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
est-ce que le serveur de secours est controlleur de domaine ? Si oui est-ce
du domaine SBS ?
Quels sont les serveurs dns configurés sur le serveur membre ?
"Franck G." wrote in message
news:Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour, merci de votre reponse rapideest-ce que le serveur de secours est controlleur de domaine ? Si oui
est-ce
du domaine SBS ?
oui, le serveur de secours est un Windows 2003 standard, intégré au
domaine
SBSQuels sont les serveurs dns configurés sur le serveur membre ?
Le DNS des serveurs membre pointe bien vers le serveur SBS 2003(controleur
principal).
Enfin, j'avais mis aussi le controleur de secours en DNS auxiliaire, mais
je
l'ai enlever. (aucun effet, sur mon problème)
cordialement"Franck G." wrote in message
news:Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner
un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas
opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms
d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire
de
licence, ce serveur cherche tout le temps a dialoguer avec le
(controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour, merci de votre reponse rapide
est-ce que le serveur de secours est controlleur de domaine ? Si oui
est-ce
du domaine SBS ?
oui, le serveur de secours est un Windows 2003 standard, intégré au
domaine
SBS
Quels sont les serveurs dns configurés sur le serveur membre ?
Le DNS des serveurs membre pointe bien vers le serveur SBS 2003(controleur
principal).
Enfin, j'avais mis aussi le controleur de secours en DNS auxiliaire, mais
je
l'ai enlever. (aucun effet, sur mon problème)
cordialement
"Franck G." <FranckG@discussions.microsoft.com> wrote in message
news:582E2048-A592-49F8-BB4E-96F317C02447@microsoft.com...
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner
un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas
opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms
d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire
de
licence, ce serveur cherche tout le temps a dialoguer avec le
(controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour, merci de votre reponse rapideest-ce que le serveur de secours est controlleur de domaine ? Si oui
est-ce
du domaine SBS ?
oui, le serveur de secours est un Windows 2003 standard, intégré au
domaine
SBSQuels sont les serveurs dns configurés sur le serveur membre ?
Le DNS des serveurs membre pointe bien vers le serveur SBS 2003(controleur
principal).
Enfin, j'avais mis aussi le controleur de secours en DNS auxiliaire, mais
je
l'ai enlever. (aucun effet, sur mon problème)
cordialement"Franck G." wrote in message
news:Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner
un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas
opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms
d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire
de
licence, ce serveur cherche tout le temps a dialoguer avec le
(controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour, merci de votre reponse rapideest-ce que le serveur de secours est controlleur de domaine ? Si oui
est-ce
du domaine SBS ?
oui, le serveur de secours est un Windows 2003 standard, intégré au
domaine
SBSQuels sont les serveurs dns configurés sur le serveur membre ?
Le DNS des serveurs membre pointe bien vers le serveur SBS 2003(controleur
principal).
Enfin, j'avais mis aussi le controleur de secours en DNS auxiliaire, mais
je
l'ai enlever. (aucun effet, sur mon problème)
cordialement"Franck G." wrote in message
news:Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner
un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas
opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms
d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire
de
licence, ce serveur cherche tout le temps a dialoguer avec le
(controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour, merci de votre reponse rapide
est-ce que le serveur de secours est controlleur de domaine ? Si oui
est-ce
du domaine SBS ?
oui, le serveur de secours est un Windows 2003 standard, intégré au
domaine
SBS
Quels sont les serveurs dns configurés sur le serveur membre ?
Le DNS des serveurs membre pointe bien vers le serveur SBS 2003(controleur
principal).
Enfin, j'avais mis aussi le controleur de secours en DNS auxiliaire, mais
je
l'ai enlever. (aucun effet, sur mon problème)
cordialement
"Franck G." <FranckG@discussions.microsoft.com> wrote in message
news:582E2048-A592-49F8-BB4E-96F317C02447@microsoft.com...
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner
un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas
opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms
d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire
de
licence, ce serveur cherche tout le temps a dialoguer avec le
(controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Bonjour, merci de votre reponse rapideest-ce que le serveur de secours est controlleur de domaine ? Si oui
est-ce
du domaine SBS ?
oui, le serveur de secours est un Windows 2003 standard, intégré au
domaine
SBSQuels sont les serveurs dns configurés sur le serveur membre ?
Le DNS des serveurs membre pointe bien vers le serveur SBS 2003(controleur
principal).
Enfin, j'avais mis aussi le controleur de secours en DNS auxiliaire, mais
je
l'ai enlever. (aucun effet, sur mon problème)
cordialement"Franck G." wrote in message
news:Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner
un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas
opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms
d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire
de
licence, ce serveur cherche tout le temps a dialoguer avec le
(controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to 'srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilàBonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to '\srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilà
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to 'srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilàBonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to 'srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilàBonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to '\srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilà
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to 'srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilàBonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
est-ce un group de portée "universel" ?
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." wrote in message
news:Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to 'srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilàBonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
est-ce un group de portée "universel" ?
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." <FranckG@discussions.microsoft.com> wrote in message
news:4D3C3664-2902-4EC2-B614-097677858BD3@microsoft.com...
Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to '\srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilà
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
est-ce un group de portée "universel" ?
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." wrote in message
news:Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to 'srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilàBonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur (ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire de
licence, ce serveur cherche tout le temps a dialoguer avec le (controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez m'aider.
Cordialement
Alors, ; j'ai lancer la commande
echo %logonserver% sur les deux serveurs membres
- les 2 me réponde le serveur SBS (srvsbs) controleur de domaine principal
- j'utilise pas de groupe universel (je ne suis pas en mode natif)
Sinon, je vien de me rendre compte d'un autre problème,:
Quand j'essai de copié un fichier d'installation sur le serveur membre me
posant problème (sur partition data) : j'ai le message acces refusé (alors
que j'ai les droits controle total)
ça me le fais de temps en temps avec un simple fichier texte.
c'est plutot bizarre c'est aléatoire comme problème :
j'ai aussi oublié de vous dire que j'avais ISA serveur 2004 sur le
controleur de domaine principal (en mode proxy : une seule carte réseau)
Mais aucune manipulation de ce coté là : qui aurai pu bloquer que le
serveur
membre qui me pose problème.est-ce un group de portée "universel" ?
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." wrote in message
news:Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working
because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00>
'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to 'srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed
information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test
CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test
CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test
CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilàBonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur
(ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner
un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas
opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms
d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire
de
licence, ce serveur cherche tout le temps a dialoguer avec le
(controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez
m'aider.
Cordialement
Alors, ; j'ai lancer la commande
echo %logonserver% sur les deux serveurs membres
- les 2 me réponde le serveur SBS (srvsbs) controleur de domaine principal
- j'utilise pas de groupe universel (je ne suis pas en mode natif)
Sinon, je vien de me rendre compte d'un autre problème,:
Quand j'essai de copié un fichier d'installation sur le serveur membre me
posant problème (sur partition data) : j'ai le message acces refusé (alors
que j'ai les droits controle total)
ça me le fais de temps en temps avec un simple fichier texte.
c'est plutot bizarre c'est aléatoire comme problème :
j'ai aussi oublié de vous dire que j'avais ISA serveur 2004 sur le
controleur de domaine principal (en mode proxy : une seule carte réseau)
Mais aucune manipulation de ce coté là : qui aurai pu bloquer que le
serveur
membre qui me pose problème.
est-ce un group de portée "universel" ?
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." <FranckG@discussions.microsoft.com> wrote in message
news:4D3C3664-2902-4EC2-B614-097677858BD3@microsoft.com...
Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working
because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00>
'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to '\srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed
information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test
CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test
CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test
CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilà
Bonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur
(ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner
un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas
opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms
d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire
de
licence, ce serveur cherche tout le temps a dialoguer avec le
(controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez
m'aider.
Cordialement
Alors, ; j'ai lancer la commande
echo %logonserver% sur les deux serveurs membres
- les 2 me réponde le serveur SBS (srvsbs) controleur de domaine principal
- j'utilise pas de groupe universel (je ne suis pas en mode natif)
Sinon, je vien de me rendre compte d'un autre problème,:
Quand j'essai de copié un fichier d'installation sur le serveur membre me
posant problème (sur partition data) : j'ai le message acces refusé (alors
que j'ai les droits controle total)
ça me le fais de temps en temps avec un simple fichier texte.
c'est plutot bizarre c'est aléatoire comme problème :
j'ai aussi oublié de vous dire que j'avais ISA serveur 2004 sur le
controleur de domaine principal (en mode proxy : une seule carte réseau)
Mais aucune manipulation de ce coté là : qui aurai pu bloquer que le
serveur
membre qui me pose problème.est-ce un group de portée "universel" ?
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." wrote in message
news:Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working
because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00>
'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to 'srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed
information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test
CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test
CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test
CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
voilàBonjour,
Pouvez-vous m'aider svp :
voici mon environnement :
1 Controleur de domaine SBS 2003 standard
1 Serveur de secours 2003 standard
2 serveur membre 2003 standard
J'ai un petit soucis quand je veux autorisé des utilisateurs sur
(ex:un
répertoire), depuis un serveur membre. le 2eme na aucun probleme.
Donc quand je vais dans l'onglet sécurité et que je veux selectionner
un
utilisateur d'active directory, j'ai aléatoirement 2 problème :
1 - la liste ne peu s'afficher : cause le serveur n'est pas
opérationnel
2 - la liste s'affiche mais quand je selectionne un utilisateur,
jai le message suivant : impossible de rechercher des noms
d'utilisateurs
a
afficher
Ce dont je comprends, pas :
- C'est que les utilisteurs arrive à travailler en TSE sans probleme
- je peu parcourir le réseau depuis ce serveur
- test de la couche TCPIP ok (la carte réseau fonctionne correctement)
- je peu connecter un lecteur réseau
Sinon, je trouve bizarre qu'a chaque fois que je lance le gestionnaire
de
licence, ce serveur cherche tout le temps a dialoguer avec le
(controleur
de
domaine : serveur de secours).
j'espère avoir bien expliquer mon problème et que vous pourrez
m'aider.
Cordialement
constatez-vous des paquets refusés sur l'isa 2004 ?
Vérifiez vos règles
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." wrote in message
news:
Alors, ; j'ai lancer la commande
echo %logonserver% sur les deux serveurs membres
- les 2 me réponde le serveur SBS (srvsbs) controleur de domaine principal
- j'utilise pas de groupe universel (je ne suis pas en mode natif)
Sinon, je vien de me rendre compte d'un autre problème,:
Quand j'essai de copié un fichier d'installation sur le serveur membre me
posant problème (sur partition data) : j'ai le message acces refusé (alors
que j'ai les droits controle total)
ça me le fais de temps en temps avec un simple fichier texte.
c'est plutot bizarre c'est aléatoire comme problème :
j'ai aussi oublié de vous dire que j'avais ISA serveur 2004 sur le
controleur de domaine principal (en mode proxy : une seule carte réseau)
Mais aucune manipulation de ce coté là : qui aurai pu bloquer que le
serveur
membre qui me pose problème.est-ce un group de portée "universel" ?
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." wrote in message
news:Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working
because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00>
'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to 'srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed
information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test
CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test
CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test
CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
constatez-vous des paquets refusés sur l'isa 2004 ?
Vérifiez vos règles
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." <FranckG@discussions.microsoft.com> wrote in message
news:F35AD5DF-C129-4B0E-8395-5DC24E2ED71F@microsoft.com...
Alors, ; j'ai lancer la commande
echo %logonserver% sur les deux serveurs membres
- les 2 me réponde le serveur SBS (srvsbs) controleur de domaine principal
- j'utilise pas de groupe universel (je ne suis pas en mode natif)
Sinon, je vien de me rendre compte d'un autre problème,:
Quand j'essai de copié un fichier d'installation sur le serveur membre me
posant problème (sur partition data) : j'ai le message acces refusé (alors
que j'ai les droits controle total)
ça me le fais de temps en temps avec un simple fichier texte.
c'est plutot bizarre c'est aléatoire comme problème :
j'ai aussi oublié de vous dire que j'avais ISA serveur 2004 sur le
controleur de domaine principal (en mode proxy : une seule carte réseau)
Mais aucune manipulation de ce coté là : qui aurai pu bloquer que le
serveur
membre qui me pose problème.
est-ce un group de portée "universel" ?
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." <FranckG@discussions.microsoft.com> wrote in message
news:4D3C3664-2902-4EC2-B614-097677858BD3@microsoft.com...
Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working
because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00>
'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to '\srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed
information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test
CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test
CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test
CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck
constatez-vous des paquets refusés sur l'isa 2004 ?
Vérifiez vos règles
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." wrote in message
news:
Alors, ; j'ai lancer la commande
echo %logonserver% sur les deux serveurs membres
- les 2 me réponde le serveur SBS (srvsbs) controleur de domaine principal
- j'utilise pas de groupe universel (je ne suis pas en mode natif)
Sinon, je vien de me rendre compte d'un autre problème,:
Quand j'essai de copié un fichier d'installation sur le serveur membre me
posant problème (sur partition data) : j'ai le message acces refusé (alors
que j'ai les droits controle total)
ça me le fais de temps en temps avec un simple fichier texte.
c'est plutot bizarre c'est aléatoire comme problème :
j'ai aussi oublié de vous dire que j'avais ISA serveur 2004 sur le
controleur de domaine principal (en mode proxy : une seule carte réseau)
Mais aucune manipulation de ce coté là : qui aurai pu bloquer que le
serveur
membre qui me pose problème.est-ce un group de portée "universel" ?
--
Cordialement,
Mathieu CHATEAU
http://lordoftheping.blogspot.com
"Franck G." wrote in message
news:Voici element demandé :
Commande Netdiag :
Computer Name: SRVSEC
DNS Host Name: srvsec.xxx.local
System info : Windows 2000 Server (Build 3790)
Processor : x86 Family 15 Model 4 Stepping 1, GenuineIntel
List of installed hotfixes :
KB921503
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933360
KB933566
KB933854
KB935839
KB935840
KB935966
KB936021
KB936357
KB936782
KB937143
KB938127
Q147222
Netcard queries test . . . . . . . : Passed
GetStats failed for 'Parallèle direct'. [ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport réseau étendu WAN (PPTP)'.
[ERROR_NOT_SUPPORTED]
GetStats failed for 'Miniport WAN (PPPOE)'. [ERROR_NOT_SUPPORTED]
[WARNING] The net card 'Miniport WAN (IP)' may not be working
because
it
has not received any packets.
GetStats failed for 'Miniport réseau étendu WAN (L2TP)'.
[ERROR_NOT_SUPPORTED]
Per interface results:
Adapter : serveurSEC
Netcard queries test . . . : Passed
Host Name. . . . . . . . . : srvsec
IP Address . . . . . . . . : 192.168.1.5
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 192.168.1.1
Primary WINS Server. . . . : 192.168.1.5
Dns Servers. . . . . . . . : 192.168.1.5
AutoConfiguration results. . . . . . : Passed
Default gateway test . . . : Passed
NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03>
'Messenger Service', <20> 'WINS' names is missing.
WINS service test. . . . . : Passed
Global results:
Domain membership test . . . . . . : Passed
NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
1 NetBt transport currently configured.
Autonet address test . . . . . . . : Passed
IP loopback ping test. . . . . . . : Passed
Default gateway test . . . . . . . : Passed
NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00>
'WorkStation
Service', <03> 'Messenger Service', <20> 'WINS' names defined.
Winsock test . . . . . . . . . . . : Passed
DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server
'192.168.1.5' and other DCs also have some of the names registered.
Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The redir is bound to 1 NetBt transport.
List of NetBt transports currently bound to the browser
NetBT_Tcpip_{84D29929-99AD-4E31-9CCF-C76C5713C019}
The browser is bound to 1 NetBt transport.
DC discovery test. . . . . . . . . : Passed
DC list test . . . . . . . . . . . : Passed
Trust relationship test. . . . . . : Passed
Secure channel for domain 'CICOV' is to 'srvsbs.xxx.local'.
Kerberos test. . . . . . . . . . . : Passed
LDAP test. . . . . . . . . . . . . : Passed
Bindings test. . . . . . . . . . . : Passed
WAN configuration test . . . . . . : Skipped
No active remote access connections.
Modem diagnostics test . . . . . . : Passed
IP Security test . . . . . . . . . : Skipped
Note: run "netsh ipsec dynamic show /?" for more detailed
information
The command completed successfully
Commande Dcdiag :
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Connectivity
......................... SRVSEC passed test Connectivity
Doing primary tests
Testing server: Premier-Site-par-defautSRVSEC
Starting test: Replications
......................... SRVSEC passed test Replications
Starting test: NCSecDesc
......................... SRVSEC passed test NCSecDesc
Starting test: NetLogons
......................... SRVSEC passed test NetLogons
Starting test: Advertising
Warning: SRVSEC is not advertising as a time server.
......................... SRVSEC failed test Advertising
Starting test: KnowsOfRoleHolders
......................... SRVSEC passed test KnowsOfRoleHolders
Starting test: RidManager
......................... SRVSEC passed test RidManager
Starting test: MachineAccount
......................... SRVSEC passed test MachineAccount
Starting test: Services
......................... SRVSEC passed test Services
Starting test: ObjectsReplicated
......................... SRVSEC passed test ObjectsReplicated
Starting test: frssysvol
......................... SRVSEC passed test frssysvol
Starting test: frsevent
......................... SRVSEC passed test frsevent
Starting test: kccevent
......................... SRVSEC passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 09/10/2007 14:21:46
(Event String could not be retrieved)
......................... SRVSEC failed test systemlog
Starting test: VerifyReferences
......................... SRVSEC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test
CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test
CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test
CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test
CheckSDRefDom
Running partition tests on : cicov
Starting test: CrossRefValidation
......................... xxx passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... xxx passed test CheckSDRefDom
Running enterprise tests on : xxx.local
Starting test: Intersite
......................... xxx.local passed test Intersite
Starting test: FsmoCheck
......................... xxx.local passed test FsmoCheck