Problème de gravure avec dvd8.5Go sur [HL-DT-ST][DVDRAM GSA-4120B][A101] : plantage du lecteur, gravure impossible

--Boundary-00=_tMbhI83/wDyRFVr
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

bonjour,



je possède un vieux (4ans) [HL-DT-ST][DVDRAM GSA-4120B][A101], c'est un
graveur dvd double couche et j'avous n'avoir jamais essayé jusqu'a ce jou=
r de
dvd+-r(w) , ayant quelques film familiaux pour lesquels je souhaite garder=

les *.dv, je préfère les mettre sur ce type de format

Via k3b, la gravure de cd/dvd simple couche ne pose pas de problème (en m=
ode
svcd et cd/dvd de données)

j'ai voulu tenté donc une gravure via k3b, mais j'ai eu un plantage 'grav=
eur'
avec wodim : le seul moyen d'avoir le lecteur à nouveau fonctionnel(1) =
était
de debrancher l'alim du lecteur, puis remise sous tension.

| avant gravure de ce dvd sous k3b : dvd+rw-mediainfo /dev/hdc
INQUIRY: [HL-DT-ST][DVDRAM GSA-4120B][A101]
GET [CURRENT] CONFIGURATION:
Mounted Media: 2Bh, DVD+R Double Layer
Current Write Speed: 4.0x1385=5540KB/s
Write Speed #0: 4.0x1385=5540KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 4.0x1385=5540KB/s@[0 -> 4173823]
Speed Descriptor#0: 02/4173823 R@3.3x1385=4568KB/s W@4.0x1385=5540K=
B/s
READ DVD STRUCTURE[#0h]:
Media Book Type: 00h, DVD-ROM book [revision 0]
Media ID: MKM/003
Legacy lead-out at: 2086912*2KB=4273995776
DVD+R DOUBLE LAYER BOUNDARY INFORMATION:
L0 Data Zone Capacity: 2086912*2KB, can still be set
READ DISC INFORMATION:
Disc status: blank
Number of Sessions: 1
State of Last Session: empty
"Next" Track: 1
Number of Tracks: 1
READ TRACK INFORMATION[#1]:
Track State: blank
Track Start Address: 0*2KB
Next Writable Address: 0*2KB
Free Blocks: 4173824*2KB
Track Size: 4173824*2KB
ROM Compatibility LBA: 262144
READ CAPACITY: 0*2048=0
gbulot@morpheus:~$ dvd+rw-mediainfo /dev/hdc
INQUIRY: [HL-DT-ST][DVDRAM GSA-4120B][A101]
GET [CURRENT] CONFIGURATION:
Mounted Media: 2Bh, DVD+R Double Layer
Current Write Speed: 4.0x1385=5540KB/s
Write Speed #0: 4.0x1385=5540KB/s
GET [CURRENT] PERFORMANCE:
Write Performance: 4.0x1385=5540KB/s@[0 -> 4173823]
Speed Descriptor#0: 02/4173823 R@3.3x1385=4568KB/s W@4.0x1385=5540K=
B/s
READ DVD STRUCTURE[#0h]:
Media Book Type: 00h, DVD-ROM book [revision 0]
Media ID: MKM/003
Legacy lead-out at: 2086912*2KB=4273995776
DVD+R DOUBLE LAYER BOUNDARY INFORMATION:
L0 Data Zone Capacity: 2086912*2KB, can still be set
READ DISC INFORMATION:
Disc status: blank
Number of Sessions: 1
State of Last Session: empty
"Next" Track: 1
Number of Tracks: 1
READ TRACK INFORMATION[#1]:
Track State: blank
Track Start Address: 0*2KB
Next Writable Address: 0*2KB
Free Blocks: 4173824*2KB
Track Size: 4173824*2KB
ROM Compatibility LBA: 262144
READ CAPACITY: 0*2048=0


| après gravure k3b : cf pièces jointes : k3b_pbgravure_doublecouche.txt
| 2iem essais k3b : cf pièces jointes : ErreurK3b_doubleCouche.txt

dans les 2 cas ci-dessus, un dvd+rw-mediainfo /dev/hdc
me renvois ceci :
[rien pendant un loooooon moment (~2minutes), puis .]
INQUIRY: [HL-DT-ST][DVDRAM GSA-4120B][A101]
GET [CURRENT] CONFIGURATION:
:-( no media mounted, exiting

> a partir de là mon graveur ne notifie plus au système l'insertio=
n d'un
média : reset courant nécessaire pour retour à la normale




| xcdroast (en mode simulation)
Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORDDVD dev= "OLDATAPI:0,1,0"=

gracetime=10 fs=4096k -v driveropts=burnfree
speed=4 -dao -dummy -eject -pad -waiti tsize=4970428s -

TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:0,1,0'
Waiting for data on stdin
devname: 'ATAPI'
Driveropts: 'burnfree'
scsibus: 0 target: 1 lun: 0
atapi: 1
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Wodim version: 1.1.2
SCSI buffer size: 64512
wodim: Cannot do inquiry for CD/DVD-Recorder.
Errno: 5 (Input/output error), test unit ready scsi sendcmd: fatal error
CDB: 00 00 00 00 00 00
cmd finished after 0.000s timeout 200s

Je pense que le problème viens de wodim-xcdroast, comment réussir cette=

gravure ?


merci




(1) lorsque j'ai inséré d'autres cd : aucun n'était reconnu via syslo=
g, la
commande de montage n'a donc aucun effet puisque le message système disai=
t
qu'il n'y avait aucun medium dans le lecteur .)

--Boundary-00=_tMbhI83/wDyRFVr
Content-Type: text/plain;
charset="iso-8859-1";
name="k3b_pbgravure_doublecouche"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="k3b_pbgravure_doublecouche"

System
--
K3b Version: 0.12.17

KDE Version: 3.5.5
QT Version: 3.3.7
Kernel: 2.6.18-6-k7
Devices
--
HL-DT-ST DVDRAM GSA-4120B A101 (/dev/hdc, ) at /media/dvd [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]

K3b
--
Size of filesystem calculated: 4020479

Used versions
--
growisofs: 7.0.1

growisofs
--
Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdc obs2k seek=0'
/dev/hdc: splitting layers at 2010240 blocks
:-[ SEND DVD+R DOUBLE LAYER RECORDING INFORMATION failed with SK=3h/ASCh/ACQh]: Input/output error

growisofs command:
--
/usr/bin/growisofs -Z /dev/hdc=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:4020479 -dvd-compat -speed=4 -overburn -use-the-force-luke=bufsize:32m

mkisofs
--
4020479
I: -input-charset not specified, using iso-8859-15 (detected in locale settings)
0.01% done, estimate finish Mon Jul 21 18:40:37 2008
0.03% done, estimate finish Mon Jul 21 18:40:37 2008
0.04% done, estimate finish Mon Jul 21 18:40:37 2008
0.05% done, estimate finish Mon Jul 21 18:40:37 2008
0.06% done, estimate finish Mon Jul 21 18:40:37 2008
0.07% done, estimate finish Mon Jul 21 18:40:37 2008
0.09% done, estimate finish Mon Jul 21 18:40:37 2008
0.10% done, estimate finish Mon Jul 21 18:40:37 2008

mkisofs command:
--
/usr/bin/X11/genisoimage -gui -graft-points -volid 20080714GgeModerne -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-gbulot/k3bxWwJic.tmp -rational-rock -hide-list /tmp/kde-gbulot/k3bZYUG7a.tmp -joliet -hide-joliet-list /tmp/kde-gbulot/k3b5w4Nja.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-gbulot/k3bw2TTzb.tmp


--Boundary-00=_tMbhI83/wDyRFVr
Content-Type: text/plain;
charset="iso-8859-1";
name="ErreurK3b_doubleCouche.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="ErreurK3b_doubleCouche.txt"

System
--
K3b Version: 0.12.17

KDE Version: 3.5.5
QT Version: 3.3.7
Kernel: 2.6.18-6-k7
Devices
--
HL-DT-ST DVDRAM GSA-4120B A101 (/dev/hdc, ) at /media/dvd [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]

K3b
--
Size of filesystem calculated: 4020480

Used versions
--
growisofs: 7.0.1

growisofs
--
Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdc obs2k seek=0'
/dev/hdc: splitting layers at 2010240 blocks
:-[ SEND DVD+R DOUBLE LAYER RECORDING INFORMATION failed with SK=3h/ASCh/ACQh]: Input/output error

growisofs command:
--
/usr/bin/growisofs -Z /dev/hdc=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:4020480 -use-the-force-luke=dummy -dvd-compat -speed=4 -overburn -use-the-force-luke=bufsize:32m

mkisofs
--
4020480
I: -input-charset not specified, using iso-8859-15 (detected in locale settings)
0.01% done, estimate finish Tue Jul 22 12:06:46 2008

mkisofs command:
--
/usr/bin/X11/genisoimage -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-gbulot/k3bXpxmUa.tmp -rational-rock -hide-list /tmp/kde-gbulot/k3bRowxIa.tmp -joliet -hide-joliet-list /tmp/kde-gbulot/k3b0kTHgb.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-gbulot/k3bBk77ya.tmp


--Boundary-00=_tMbhI83/wDyRFVr--

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/DebFrFrenchLists
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org