Conscient du peu d'information dont je dispose et que je propose voici
le Xorg.0.log correspondant à ma tentative de connexion infructueuse.
Conscient du peu d'information dont je dispose et que je propose voici
le Xorg.0.log correspondant à ma tentative de connexion infructueuse.
Conscient du peu d'information dont je dispose et que je propose voici
le Xorg.0.log correspondant à ma tentative de connexion infructueuse.
Il n'y a pas d'erreur, en revanche ça finit par « Backtrace: », pas
forcément bon signe.
Un truc qui aide aussi pour débugger, c'est savoir
ce que l'on débug... Voici un fichier de conf sous Lenny qui fonctionne
avec le pilote proprio (avec en prime le clavier azerty pour pouvoir
taper son mot de passe dans kdm ;) :
$ cat /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbLayout" "fr"
EndSection
Section "Device"
Identifier "Configured Video Device"
# Driver "nouveau"
Driver "nvidia"
EndSection
Amicalement
David
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iEYEARECAAYFAksW3tkACgkQ18/WetbTC/qBqwCdGanjHNL1Ayo6Q9yKzU5qV3Vn
f9MAnRISPI8nfl/Qs2olLew4lQVfdsBa
=uQaG
-----END PGP SIGNATURE-----
Il n'y a pas d'erreur, en revanche ça finit par « Backtrace: », pas
forcément bon signe.
Un truc qui aide aussi pour débugger, c'est savoir
ce que l'on débug... Voici un fichier de conf sous Lenny qui fonctionne
avec le pilote proprio (avec en prime le clavier azerty pour pouvoir
taper son mot de passe dans kdm ;) :
$ cat /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbLayout" "fr"
EndSection
Section "Device"
Identifier "Configured Video Device"
# Driver "nouveau"
Driver "nvidia"
EndSection
Amicalement
David
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iEYEARECAAYFAksW3tkACgkQ18/WetbTC/qBqwCdGanjHNL1Ayo6Q9yKzU5qV3Vn
f9MAnRISPI8nfl/Qs2olLew4lQVfdsBa
=uQaG
-----END PGP SIGNATURE-----
Il n'y a pas d'erreur, en revanche ça finit par « Backtrace: », pas
forcément bon signe.
Un truc qui aide aussi pour débugger, c'est savoir
ce que l'on débug... Voici un fichier de conf sous Lenny qui fonctionne
avec le pilote proprio (avec en prime le clavier azerty pour pouvoir
taper son mot de passe dans kdm ;) :
$ cat /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbLayout" "fr"
EndSection
Section "Device"
Identifier "Configured Video Device"
# Driver "nouveau"
Driver "nvidia"
EndSection
Amicalement
David
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iEYEARECAAYFAksW3tkACgkQ18/WetbTC/qBqwCdGanjHNL1Ayo6Q9yKzU5qV3Vn
f9MAnRISPI8nfl/Qs2olLew4lQVfdsBa
=uQaG
-----END PGP SIGNATURE-----
> > Il n'y a pas d'erreur, en revanche ça finit par « Backtrace: », pas
> forcément bon signe.
> > Il n'y a pas d'erreur, en revanche ça finit par « Backtrace: », pas
> forcément bon signe.
> > Il n'y a pas d'erreur, en revanche ça finit par « Backtrace: », pas
> forcément bon signe.
Le mercredi 02 décembre 2009 à 17:40 -0400, David Prévot a écrit :
$ cat /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbLayout" "fr"
EndSection
Section "Device"
Identifier "Configured Video Device"
# Driver "nouveau"
Driver "nvidia"
EndSection
Avant de faire une autre bétise, je rajoute ces lignes dans la
xorg.conf ?
Le mercredi 02 décembre 2009 à 17:40 -0400, David Prévot a écrit :
$ cat /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbLayout" "fr"
EndSection
Section "Device"
Identifier "Configured Video Device"
# Driver "nouveau"
Driver "nvidia"
EndSection
Avant de faire une autre bétise, je rajoute ces lignes dans la
xorg.conf ?
Le mercredi 02 décembre 2009 à 17:40 -0400, David Prévot a écrit :
$ cat /etc/X11/xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbLayout" "fr"
EndSection
Section "Device"
Identifier "Configured Video Device"
# Driver "nouveau"
Driver "nvidia"
EndSection
Avant de faire une autre bétise, je rajoute ces lignes dans la
xorg.conf ?
Non. Je te suggérais deux choses : nous envoyer le fichier de config qui
va avec le fichier de log.
Amicalement
David
Non. Je te suggérais deux choses : nous envoyer le fichier de config qui
va avec le fichier de log.
Amicalement
David
Non. Je te suggérais deux choses : nous envoyer le fichier de config qui
va avec le fichier de log.
Amicalement
David
Bonjour à tousNon. Je te suggérais deux choses : nous envoyer le fichier de config qui
va avec le fichier de log.
Voici le xorg.config qui ne marche pas :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual
page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
# local font server
# if the local font server has problems, we can fall back on these
FontPath "unix/:7100"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
# Load "type1"
Load "vbe"
Load "wacom"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "logiink"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom" # Change
to
# /dev/input/event2
# for USB
Option "Type" "stylus"
Option "Mode" "absolute"
Option "Tilt" "on"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom" # Change
to
# /dev/input/event2
# for USB
Option "Type" "eraser"
Option "Mode" "absolute"
EndSection
#Section "InputDevice"
# Identifier "Cursor"
# Driver "wacom"
# Option "Device" "/dev/input/wacom" # USB ONLY
# Option "Type" "cursor"
# Option "USB" "on" # USB ONLY
# Option "Threshold" "10"
# Option "Mode" "Absolute"
# Option "Twinview" "horizontal"
# Option "ScreenNo" "1"
# Option "PressCurve" "0,0,100,100"
# Option "Tilt" "on"
# Option "Vendor" "WACOM"
#EndSection
Section "InputDevice"
Identifier "Pad"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "pad"
# Option "USB" "on" # USB ONLY
EndSection
Section "Monitor"
Identifier "Spectrum_7Vlr"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 130.0
Option "DPMS"
EndSection
Section "Device"
Identifier "WinFast_Graphics_Series"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "WinFast_Graphics_Series"
Monitor "Spectrum_7Vlr"
DefaultDepth 24
Option "TwinView"
Option "SecondMonitorHorizSync" "30-80"
Option "SecondMonitorVertRefresh" "50-130"
Option "TwinViewOrientation" "LeftOf"
Option "MetaModes"
"1280x1024,1440x900;1024x768,1024x768;800x600,800x600;640x480,640x480;320x200,NULL"
Option "ConnectedMonitor" "CRT,CRT"
SubSection "Display"
Depth 1
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
# ajouté pour la tablette graphire USB
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard" "CoreKeyboard"
InputDevice "Configured Mouse" "CorePointer"
InputDevice "Stylus" "SendCoreEvents"
InputDevice "Eraser" "SendCoreEvents"
# InputDevice "Cursor" "SendCoreEvents"
InputDevice "Pad" ""
EndSectionAmicalement
Bien à vousDavid
P'tit Louis
Bonjour à tous
Non. Je te suggérais deux choses : nous envoyer le fichier de config qui
va avec le fichier de log.
Voici le xorg.config qui ne marche pas :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual
page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
# local font server
# if the local font server has problems, we can fall back on these
FontPath "unix/:7100"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
# Load "type1"
Load "vbe"
Load "wacom"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "logiink"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom" # Change
to
# /dev/input/event2
# for USB
Option "Type" "stylus"
Option "Mode" "absolute"
Option "Tilt" "on"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom" # Change
to
# /dev/input/event2
# for USB
Option "Type" "eraser"
Option "Mode" "absolute"
EndSection
#Section "InputDevice"
# Identifier "Cursor"
# Driver "wacom"
# Option "Device" "/dev/input/wacom" # USB ONLY
# Option "Type" "cursor"
# Option "USB" "on" # USB ONLY
# Option "Threshold" "10"
# Option "Mode" "Absolute"
# Option "Twinview" "horizontal"
# Option "ScreenNo" "1"
# Option "PressCurve" "0,0,100,100"
# Option "Tilt" "on"
# Option "Vendor" "WACOM"
#EndSection
Section "InputDevice"
Identifier "Pad"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "pad"
# Option "USB" "on" # USB ONLY
EndSection
Section "Monitor"
Identifier "Spectrum_7Vlr"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 130.0
Option "DPMS"
EndSection
Section "Device"
Identifier "WinFast_Graphics_Series"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "WinFast_Graphics_Series"
Monitor "Spectrum_7Vlr"
DefaultDepth 24
Option "TwinView"
Option "SecondMonitorHorizSync" "30-80"
Option "SecondMonitorVertRefresh" "50-130"
Option "TwinViewOrientation" "LeftOf"
Option "MetaModes"
"1280x1024,1440x900;1024x768,1024x768;800x600,800x600;640x480,640x480;320x200,NULL"
Option "ConnectedMonitor" "CRT,CRT"
SubSection "Display"
Depth 1
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
# ajouté pour la tablette graphire USB
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard" "CoreKeyboard"
InputDevice "Configured Mouse" "CorePointer"
InputDevice "Stylus" "SendCoreEvents"
InputDevice "Eraser" "SendCoreEvents"
# InputDevice "Cursor" "SendCoreEvents"
InputDevice "Pad" ""
EndSection
Amicalement
Bien à vous
David
P'tit Louis
Bonjour à tousNon. Je te suggérais deux choses : nous envoyer le fichier de config qui
va avec le fichier de log.
Voici le xorg.config qui ne marche pas :
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual
page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
# local font server
# if the local font server has problems, we can fall back on these
FontPath "unix/:7100"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
# Load "type1"
Load "vbe"
Load "wacom"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "logiink"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom" # Change
to
# /dev/input/event2
# for USB
Option "Type" "stylus"
Option "Mode" "absolute"
Option "Tilt" "on"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom" # Change
to
# /dev/input/event2
# for USB
Option "Type" "eraser"
Option "Mode" "absolute"
EndSection
#Section "InputDevice"
# Identifier "Cursor"
# Driver "wacom"
# Option "Device" "/dev/input/wacom" # USB ONLY
# Option "Type" "cursor"
# Option "USB" "on" # USB ONLY
# Option "Threshold" "10"
# Option "Mode" "Absolute"
# Option "Twinview" "horizontal"
# Option "ScreenNo" "1"
# Option "PressCurve" "0,0,100,100"
# Option "Tilt" "on"
# Option "Vendor" "WACOM"
#EndSection
Section "InputDevice"
Identifier "Pad"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "pad"
# Option "USB" "on" # USB ONLY
EndSection
Section "Monitor"
Identifier "Spectrum_7Vlr"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 130.0
Option "DPMS"
EndSection
Section "Device"
Identifier "WinFast_Graphics_Series"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "WinFast_Graphics_Series"
Monitor "Spectrum_7Vlr"
DefaultDepth 24
Option "TwinView"
Option "SecondMonitorHorizSync" "30-80"
Option "SecondMonitorVertRefresh" "50-130"
Option "TwinViewOrientation" "LeftOf"
Option "MetaModes"
"1280x1024,1440x900;1024x768,1024x768;800x600,800x600;640x480,640x480;320x200,NULL"
Option "ConnectedMonitor" "CRT,CRT"
SubSection "Display"
Depth 1
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
# ajouté pour la tablette graphire USB
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard" "CoreKeyboard"
InputDevice "Configured Mouse" "CorePointer"
InputDevice "Stylus" "SendCoreEvents"
InputDevice "Eraser" "SendCoreEvents"
# InputDevice "Cursor" "SendCoreEvents"
InputDevice "Pad" ""
EndSectionAmicalement
Bien à vousDavid
P'tit Louis
Bonjour,
Je ne suis pas expert dans le domaine, mais c'est un sacrée chantier
ton xorg oO
Je serais toi je désinstallerais le driver NVidia ferais une copie de
sauvegarde de mon fichier xorg.conf puis en supprimerais un.
Puis réinstallation.
Car à vue d'oeil, ce xorg.conf n'est pas un xorg.conf généré par une
installation de pilote NVidia proprio.
Cordialement
Bonjour,
Je ne suis pas expert dans le domaine, mais c'est un sacrée chantier
ton xorg oO
Je serais toi je désinstallerais le driver NVidia ferais une copie de
sauvegarde de mon fichier xorg.conf puis en supprimerais un.
Puis réinstallation.
Car à vue d'oeil, ce xorg.conf n'est pas un xorg.conf généré par une
installation de pilote NVidia proprio.
Cordialement
Bonjour,
Je ne suis pas expert dans le domaine, mais c'est un sacrée chantier
ton xorg oO
Je serais toi je désinstallerais le driver NVidia ferais une copie de
sauvegarde de mon fichier xorg.conf puis en supprimerais un.
Puis réinstallation.
Car à vue d'oeil, ce xorg.conf n'est pas un xorg.conf généré par une
installation de pilote NVidia proprio.
Cordialement