USB & Android

Le
ptilou
Bonjour,


Je pense que quelqu'un ma pourri mon bios ( paranoia ? )
J' ai appele Packard Bell, qui pense qu'il vaut mieux changer de machine ..=
.
Je me demander comment marche les bios, commenton met à jour, c'est du 8 =
bit pour des CM de desktop ?
Le site de PB ne fourni plus les drivers de ma tour !
Et je n'arrive pas à monter souvent des périph USB de masse, ausi bien =
sur MS que Debian amd 64 tous à jour !
J'ai çà comme erreur dans mon dmesg :

[ 8588.132046] usb 1-2: new high speed USB device using ehci_hcd and addres=
s 3
[ 8588.256027] usb 1-2: device descriptor read/64, error -71
[ 8588.484065] usb 1-2: device descriptor read/64, error -71
[ 8588.700586] usb 1-2: new high speed USB device using ehci_hcd and addres=
s 4
[ 8588.824050] usb 1-2: device descriptor read/64, error -71
[ 8589.052053] usb 1-2: device descriptor read/64, error -71
[ 8589.268561] usb 1-2: new high speed USB device using ehci_hcd and addres=
s 5
[ 8589.300792] usb 1-2: device descriptor read/8, error -71
[ 8589.432533] usb 1-2: device descriptor read/8, error -71
[ 8589.648574] usb 1-2: new high speed USB device using ehci_hcd and addres=
s 6
[ 8589.680786] usb 1-2: device descriptor read/8, error -71
[ 8589.812402] usb 1-2: device descriptor read/8, error -71
[ 8589.916058] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 8590.300558] usb 3-1: new full speed USB device using ohci_hcd and addres=
s 2
[ 8590.501023] usb 3-1: not running at top speed; connect to a high speed h=
ub
[ 8590.519023] usb 3-1: New USB device found, idVendor=18d1, idProduct==
0001
[ 8590.519029] usb 3-1: New USB device strings: Mfr=2, Product=3, Seria=
lNumber=4
[ 8590.519033] usb 3-1: Product: Android
[ 8590.519036] usb 3-1: Manufacturer: USB Developer
[ 8590.519039] usb 3-1: SerialNumber: 20080411
[ 8590.519245] usb 3-1: configuration #1 chosen from 1 choice
[ 8590.525303] scsi5 : SCSI emulation for USB Mass Storage devices
[ 8590.529004] usb-storage: device found at 2
[ 8590.529009] usb-storage: waiting for device to settle before scanning
[ 8595.530008] usb-storage: device scan complete
[ 8616.980541] usb 3-1: reset full speed USB device using ohci_hcd and addr=
ess 2
[ 8627.360043] usb 3-1: reset full speed USB device using ohci_hcd and addr=
ess 2
[ 8643.748028] usb 3-1: reset full speed USB device using ohci_hcd and addr=
ess 2
[ 8644.132521] usb 3-1: reset full speed USB device using ohci_hcd and addr=
ess 2
[ 8651.788039] scsi 5:0:0:0: Device offlined - not ready after error recove=
ry
[ 8651.788046] usb 3-1: USB disconnect, address 2
[ 8652.236531] usb 1-2: new high speed USB device using ehci_hcd and addres=
s 7
[ 8652.360025] usb 1-2: device descriptor read/64, error -71
[ 8652.532363] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 8652.988027] usb 3-1: new full speed USB device using ohci_hcd and addres=
s 3
[ 8653.188093] usb 3-1: not running at top speed; connect to a high speed h=
ub
[ 8653.206085] usb 3-1: New USB device found, idVendor=18d1, idProduct==
0001
[ 8653.206091] usb 3-1: New USB device strings: Mfr=2, Product=3, Seria=
lNumber=4
[ 8653.206095] usb 3-1: Product: Android
[ 8653.206098] usb 3-1: Manufacturer: USB Developer
[ 8653.206101] usb 3-1: SerialNumber: 20080411
[ 8653.206275] usb 3-1: configuration #1 chosen from 1 choice
[ 8653.212277] scsi6 : SCSI emulation for USB Mass Storage devices
[ 8653.212431] usb-storage: device found at 3
[ 8653.212435] usb-storage: waiting for device to settle before scanning
[ 8658.214071] usb-storage: device scan complete
[ 8662.365790] usb 3-1: USB disconnect, address 3
[ 8662.672021] usb 3-1: new full speed USB device using ohci_hcd and addres=
s 4
[ 8662.872939] usb 3-1: not running at top speed; connect to a high speed h=
ub
[ 8662.890937] usb 3-1: New USB device found, idVendor=18d1, idProduct==
0001
[ 8662.890942] usb 3-1: New USB device strings: Mfr=2, Product=3, Seria=
lNumber=4
[ 8662.890946] usb 3-1: Product: Android
[ 8662.890949] usb 3-1: Manufacturer: USB Developer
[ 8662.890952] usb 3-1: SerialNumber: 20080411
[ 8662.891120] usb 3-1: configuration #1 chosen from 1 choice
[ 8662.897118] scsi7 : SCSI emulation for USB Mass Storage devices
[ 8662.897266] usb-storage: device found at 4
[ 8662.897269] usb-storage: waiting for device to settle before scanning
[ 8665.993836] usb 3-1: USB disconnect, address 4
[ 8666.364030] usb 1-2: new high speed USB device using ehci_hcd and addres=
s 8
[ 8666.432321] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 8673.784024] usb 1-1: new high speed USB device using ehci_hcd and addres=
s 9
[ 8673.908023] usb 1-1: device descriptor read/64, error -71
[ 8674.136030] usb 1-1: device descriptor read/64, error -71
[ 8674.352036] usb 1-1: new high speed USB device using ehci_hcd and addres=
s 10
[ 8674.476022] usb 1-1: device descriptor read/64, error -71
[ 8674.648354] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 8674.888041] usb 1-1: new high speed USB device using ehci_hcd and addres=
s 11
[ 8675.012533] usb 1-1: device descriptor read/64, error -71
[ 8675.240086] usb 1-1: device descriptor read/64, error -71
[ 8675.456532] usb 1-1: new high speed USB device using ehci_hcd and addres=
s 12
[ 8675.580034] usb 1-1: device descriptor read/64, error -71
[ 8675.808033] usb 1-1: device descriptor read/64, error -71
[ 8676.024031] usb 1-1: new high speed USB device using ehci_hcd and addres=
s 13
[ 8676.056309] usb 1-1: device descriptor read/8, error -71
[ 8676.188305] usb 1-1: device descriptor read/8, error -71
[ 8676.404545] usb 1-1: new high speed USB device using ehci_hcd and addres=
s 14
[ 8676.436302] usb 1-1: device descriptor read/8, error -71
[ 8676.568308] usb 1-1: device descriptor read/8, error -71
[ 8676.672036] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 8677.128516] usb 2-1: new full speed USB device using ohci_hcd and addres=
s 3
[ 8677.328275] usb 2-1: not running at top speed; connect to a high speed h=
ub
[ 8677.346273] usb 2-1: New USB device found, idVendor=18d1, idProduct==
0001
[ 8677.346279] usb 2-1: New USB device strings: Mfr=2, Product=3, Seria=
lNumber=4
[ 8677.346283] usb 2-1: Product: Android
[ 8677.346286] usb 2-1: Manufacturer: USB Developer
[ 8677.346289] usb 2-1: SerialNumber: 20080411
[ 8677.346464] usb 2-1: configuration #1 chosen from 1 choice
[ 8677.352447] scsi8 : SCSI emulation for USB Mass Storage devices
[ 8677.352693] usb-storage: device found at 3
[ 8677.352697] usb-storage: waiting for device to settle before scanning
[ 8682.354261] usb-storage: device scan complete
[ 8703.993622] usb 2-1: reset full speed USB device using ohci_hcd and addr=
ess 3
[ 8714.372032] usb 2-1: reset full speed USB device using ohci_hcd and addr=
ess 3
[ 8730.760023] usb 2-1: reset full speed USB device using ohci_hcd and addr=
ess 3
[ 8731.144039] usb 2-1: reset full speed USB device using ohci_hcd and addr=
ess 3
[ 8736.922100] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fi=
fo 2
[ 8737.462456] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 8737.467571] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialis=
ed FIFO 2
[ 8741.524021] usb 2-1: reset full speed USB device using ohci_hcd and addr=
ess 3
[ 8741.730317] scsi 8:0:0:0: Device offlined - not ready after error recove=
ry
[ 8900.999228] usb 2-1: USB disconnect, address 3
[ 8914.176520] usb 1-1: new high speed USB device using ehci_hcd and addres=
s 15
[ 8914.300029] usb 1-1: device descriptor read/64, error -71
[ 8914.528020] usb 1-1: device descriptor read/64, error -71
[ 8914.744018] usb 1-1: new high speed USB device using ehci_hcd and addres=
s 16
[ 8914.868029] usb 1-1: device descriptor read/64, error -71
[ 8915.096018] usb 1-1: device descriptor read/64, error -71
[ 8915.312018] usb 1-1: new high speed USB device using ehci_hcd and addres=
s 17
[ 8915.344236] usb 1-1: device descriptor read/8, error -71
[ 8915.476362] usb 1-1: device descriptor read/8, error -71
[ 8915.692024] usb 1-1: new high speed USB device using ehci_hcd and addres=
s 18
[ 8915.724230] usb 1-1: device descriptor read/8, error -71
[ 8915.856353] usb 1-1: device descriptor read/8, error -71
[ 8915.960031] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 8916.416020] usb 2-1: new full speed USB device using ohci_hcd and addres=
s 4
[ 8916.616684] usb 2-1: not running at top speed; connect to a high speed h=
ub
[ 8916.634684] usb 2-1: New USB device found, idVendor=18d1, idProduct==
0001
[ 8916.634689] usb 2-1: New USB device strings: Mfr=2, Product=3, Seria=
lNumber=4
[ 8916.634693] usb 2-1: Product: Android
[ 8916.634696] usb 2-1: Manufacturer: USB Developer
[ 8916.634700] usb 2-1: SerialNumber: 20080411
[ 8916.634865] usb 2-1: configuration #1 chosen from 1 choice
[ 8916.640865] scsi9 : SCSI emulation for USB Mass Storage devices
[ 8916.641005] usb-storage: device found at 4
[ 8916.641009] usb-storage: waiting for device to settle before scanning
[ 8921.641677] usb-storage: device scan complete
[ 8942.992023] usb 2-1: reset full speed USB device using ohci_hcd and addr=
ess 4
[ 8953.372044] usb 2-1: reset full speed USB device using ohci_hcd and addr=
ess 4
[ 8969.760022] usb 2-1: reset full speed USB device using ohci_hcd and addr=
ess 4
[ 8970.144524] usb 2-1: reset full speed USB device using ohci_hcd and addr=
ess 4
[ 8980.524019] usb 2-1: reset full speed USB device using ohci_hcd and addr=
ess 4
[ 8980.730745] scsi 9:0:0:0: Device offlined - not ready after error recove=
ry
root@debian:/home/ptilou#


Une idée ?

Merci

Ptilou
Vidéos High-Tech et Jeu Vidéo
Téléchargements
Vos réponses
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
jp willm
Le #24978382
Le 20/11/2012 13:35, ptilou a écrit :
Bonjour,


Je pense que quelqu'un ma pourri mon bios ( paranoia ? )
J' ai appele Packard Bell, qui pense qu'il vaut mieux changer de machine ...
Je me demander comment marche les bios, commenton met à jour, c'est du 8 bit pour des CM de desktop ?
Le site de PB ne fourni plus les drivers de ma tour !
Et je n'arrive pas à monter souvent des périph USB de masse, ausi bien sur MS que Debian amd 64 tous à jour !
J'ai çà comme erreur dans mon dmesg :

Une idée ?



Démarre avec une version live pour voir



--
http://perso.orange.fr/willms/index.html
Doug713705
Le #24980152
Le 20-11-2012, ptilou nous expliquait dans fr.comp.os.linux.configuration :

Je pense que quelqu'un ma pourri mon bios ( paranoia ? )



Arrête de penser, ça ne te va pas.

J' ai appele Packard Bell, qui pense qu'il vaut mieux changer de machine ...



Que veux tu, une hotline digne de ce nom reste toujours courtoise.

Une idée ?



Google est ton ami mais comme je ne suis pas chien je t'aide un peu :
Ça devrait avoir un rapport avec autosuspend (il m'a fallu 30 secondes
pour trouver la solution dont 2 pour faire un copier/coller du message
d'erreur dans google et 28 de temps de temps de latence et ici la
latence ce n'est pas rien).

Merci



De rien.

--
Doug - Linux user #307925 - Slackware64 roulaize ;-)
Without freedom of choice there is no creativity.
-- Kirk, "The return of the Archons", stardate 3157.4
Professeur M
Le #24981802
Le Tue, 20 Nov 2012 04:35:39 -0800, ptilou a écrit :

J' ai appele Packard Bell, qui pense qu'il vaut mieux changer de machine
...



ne les écoute pas, ce sont des incompétents. Ce n'est pas d'une nouvelle
machine dont tu as besoin, mais d'un nouveau cerveau. Rachète celui de
pipotruc, il n'a jamais servi.
Publicité
Poster une réponse
Anonyme