You didn't specify the type of your ufs filesystem

Le
gregoonix greg
=_Part_8790_7162268.1203446891891
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Bonsoir ,

Après une recompilation de mon noyau 2.6.24 , au boot j'ai ce message
qui n'est pas bloquant :

You didn't specify the type of your ufs filesystem

mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|
nextstep-cd| openstep

>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is
ufstype=old

Pouvez vous m'en dire plus sur ce message ?

=_Part_8790_7162268.1203446891891
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Bonsoir ,<br><br>Après une recompilation de mon noyau 2.6.24 , au boot j&=
#39;ai ce message<br>qui n&#39;est pas bloquant :<br><br>You didn&#39;t spe=
cify the type of your ufs filesystem<br><br>mount -t ufs -o ufstype=sun|s=
unx86|44bsd|ufs2<div style="direction: ltr;">
|5xbsd|old|hp|nextstep|<br>nextstep-cd| openstep <br><br>&gt;&gt;&gt;WAR=
NING&lt;&lt;&lt; Wrong ufstype may corrupt your filesystem, default is ufst=
ype=old<br><br>Pouvez vous m&#39;en dire plus sur ce message ?</div>

=_Part_8790_7162268.1203446891891--


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Vos réponses
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
Sylvain Sauvage
Le #9710641
gregoonix greg, mardi 19 février 2008, 19:48:11 CET

Bonsoir ,



’jour,

Après une recompilation de mon noyau 2.6.24 , au boot j'ai ce
message qui n'est pas bloquant :

You didn't specify the type of your ufs filesystem

mount -t ufs -o
ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|
nextstep-cd| openstep ...

>>>WARNING<<< Wrong ufstype may corrupt your filesystem,
>>>default is
ufstype=old

Pouvez vous m'en dire plus sur ce message ?



Il dit que tu dois donner le (sous-)type de l’ufs que tu
utilises. (UFS est un système de fichier des (vieux) unix.)

Question importante : est-ce que tu as une partition en ufs ?

Si oui, alors tu devrais savoir quel système d’exploitation a
créé ce FS et donc son type.

Si non, alors tu dois avoir une erreur dans ton fstab.

--
Sylvain Sauvage
Sylvain Sauvage
Le #9710621
[remis sur la liste, d’où le CC: à l’auteur]

Bon, alors on commence par la forme : merci de lire
http://www.debian.org/MailingLists/index.fr.html
et, notamment :
— on répond à la liste et seulement à la liste ;
— on ne poste qu’en texte pur, pas de HTML ;
— on répond en dessous de la citation, pas au dessus, et on
coupe ce qui ne sert pas.

Voilà, tu es prévenu, la prochaine fois, on t’envoie
l’inquisition espagnole.

gregoonix greg, mercredi 20 février 2008, 14:05:38 CET

Non je n'ai pas de partition UFS ,



Donc c’est normal qu’il n’arrive pas en monter un e.

Par contre, comme il essaie, c’est que « quelqu†™un » lui a dit
qu’il y en avait une et, en général, c’est dans l a fstab que
c’est dit.

je n'ai pas vu d'erreur dans fstab



Nous non plus, vu qu’on n’a pas vu la fstab du tout†¦ Tu ne
veux pas la poster ?

--
Sylvain Sauvage
gregoonix greg
Le #9710461
------=_Part_13112_1596582.1203534242567
Content-Type: text/plain; charset=WINDOWS-1252
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Nous non plus, vu qu'on n'a pas vu la fstab du tout… Tu ne

veux pas la poster ?




le voici

# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda1 / ext3 defaults,errors=remount-ro 0
1
/dev/hda6 /home ext3 defaults 0 2
/dev/hda5 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0





------=_Part_13112_1596582.1203534242567
Content-Type: text/html; charset=WINDOWS-1252
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Nous non plus, vu qu'on n'a pas vu la fstab du tout… Tu ne proc&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; /pro c&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; proc&nbsp;&nb sp;&nbsp; defaults&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;& nbsp;&nbsp;&nbsp;&nbsp; 0<br>/dev/hda1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; /&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n bsp;&nbsp; ext3&nbsp;&nbsp;&nbsp; defaults,errors=remount-ro 0&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp; 1<br>/dev/hda6&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ; /home&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ext3&nb sp;&nbsp;&nbsp; defaults&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;& nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2<br>/dev/hda5&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& nbsp; none&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ; swap&nbsp;&nbsp;&nbsp; sw&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0<br>
/dev/hdc&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; /media/cdrom0&nbsp;&nbsp ; iso9660 ro,user,noauto&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp;&nbsp;& nbsp;&nbsp; 0<br>/dev/fd0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; /media/ floppy0&nbsp; auto&nbsp;&nbsp;&nbsp; rw,user,noauto&nbsp; 0&nbsp;&nbsp;&nbs p;&nbsp;&nbsp;&nbsp; 0<br><br></blockquote></div><br>

------=_Part_13112_1596582.1203534242567--


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
gregoonix greg
Le #9647851
------=_Part_1981_5142928.1203604051954
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline


Le problème n'est toujours pas résolu.





Quelqu'un peut il me donner un coup de main ?

------=_Part_1981_5142928.1203604051954
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

<div>
<div>
<div>&nbsp;</div>
<div>&nbsp;</div>
<div>Quelqu&#39;un peut il me donner un coup de main ?</div><br>&nbsp;</div ><br>

------=_Part_1981_5142928.1203604051954--


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Sébastien NOBILI
Le #9647811
Le jeudi 21 février 08 à 15:27, gregoonix greg a écrit :
|
| Le problème n'est toujours pas résolu.

Le problème c'est qu'il n'y a aucune partition UFS dans le fstab !
Le message en question ne devrait donc pas remonter à moins que :
- l'une des partitions soit corrompue et que le système essaye à tort
de la monter en UFS
- il y ait une partition UFS sur la machine et qu'elle ne soit pas dans
le fstab. Auquel cas elle serait montée par un script avec la
commande mount et tous ses arguments.

Quoi qu'il en soit tu devrais t'impliquer un peu plus dans la résolution
de ton problème. As-tu oui ou non une partition UFS sur ta machine ?
Connais-tu le point de montage et le périphérique associé à cette
partition UFS ?

Enfin, comme il t'a déjà été signalé, le HTML est à bannir des listes de
diffusion, merci de poster en texte brut.

| Quelqu'un peut il me donner un coup de main ?

Peux pas mieux faire...

Seb


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
gregoonix greg
Le #9647801
------=_Part_2263_27741868.1203607808258
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline


Quoi qu'il en soit tu devrais t'impliquer un peu plus dans la résolutio n
de ton problème. As-tu oui ou non une partition UFS sur ta machine ?
Connais-tu le point de montage et le périphérique associé à cette
partition UFS ?




Non je n'ai pas de partition UFS.

Le problème est apparue aprés recompilation du kernel 2.6.24, avant je
n'avais jamais vu ce message d'erreur , aucune modification n'a été
effectuée dans les options FS du kernel.

Je posterais ce soir le dmesg

------=_Part_2263_27741868.1203607808258
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

<div>
Connais-tu le point de montage et le périphérique associé à cette<b r>partition UFS ?</blockquote>
<div>&nbsp;</div>
<div>&nbsp;</div>
<div>&nbsp;</div>
<div>Je posterais ce soir le dmesg</div><br>&nbsp;</div><br>

------=_Part_2263_27741868.1203607808258--


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Yves Rutschle
Le #9647761
On Thu, Feb 21, 2008 at 04:30:08PM +0100, gregoonix greg wrote:
Non je n'ai pas de partition UFS.



[...]
Je posterais ce soir le dmesg



Et ton /etc/fstab.

Hypothèse:
Y'a de bonnes chances qu'au démarrage tu montes un FS sans
préciser le type de FS: le noyau essaie alors tous les types
de FS; le code de UFS se plaint que le type UFS n'est pas
préciser, puis se rend compte que ce n'est pas de l'UFS du
tout.

Dans ce cas, c'est sans gravité, et on peut le considérer
comme un bug du code UFS.

Y.


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
gregoonix greg
Le #9647751
------=_Part_2985_17141399.1203619964357
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Le 21/02/08, Yves Rutschle

On Thu, Feb 21, 2008 at 04:30:08PM +0100, gregoonix greg wrote:
> Non je n'ai pas de partition UFS.
>

[...]

> Je posterais ce soir le dmesg :






19:52 ~% dmesg
Linux version 2.6.24 () (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #7 Wed Feb 20 21:01:17 CET 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005ff60000 (usable)
BIOS-e820: 000000005ff60000 - 000000005ff78000 (ACPI data)
BIOS-e820: 000000005ff78000 - 000000005ff7a000 (ACPI NVS)
BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
639MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 393056) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 393056
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 393056
On node 0 totalpages: 393056
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 1278 pages used for memmap
HighMem zone: 162402 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F6B40, 0024 (r2 IBM )
ACPI: XSDT 5FF6B321, 004C (r1 IBM TP-1Q 2140 LTP 0)
ACPI: FACP 5FF6B400, 00F4 (r3 IBM TP-1Q 2140 IBM 1)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address o r
length: 000000000000102C/0 [20070126]
ACPI: DSDT 5FF6B5E7, C881 (r1 IBM TP-1Q 2140 MSFT 100000E)
ACPI: FACS 5FF79000, 0040
ACPI: SSDT 5FF6B5B4, 0033 (r1 IBM TP-1Q 2140 MSFT 100000E)
ACPI: ECDT 5FF77E68, 0052 (r1 IBM TP-1Q 2140 IBM 1)
ACPI: TCPA 5FF77EBA, 0032 (r1 IBM TP-1Q 2140 PTL 1)
ACPI: BOOT 5FF77FD8, 0028 (r1 IBM TP-1Q 2140 LTP 1)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 70000000 (gap: 60000000:9f800000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
389986
Kernel command line: root=/dev/hda1 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1398.847 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1550204k/1572224k available (1620k kernel code, 20740k reserved,
663k data, 188k init, 654720k highmem)
virtual kernel memory layout:
fixmap : 0xfffe9000 - 0xfffff000 ( 88 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc033e000 - 0xc036d000 ( 188 kB)
.data : 0xc029537a - 0xc033b204 ( 663 kB)
.text : 0xc0100000 - 0xc029537a (1620 kB)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 2798.56 BogoMIPS
(lpj99281)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000
00000180 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00002040 00000180
00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0800)
net_namespace: 64 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnpacpi: exceeded the max number of mem resources: 12
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NET: Registered protocol family 8
NET: Registered protocol family 20
Time: tsc clocksource has been installed.
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0xdc000-0xdffff has been reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: c0100000-c01fffff
PREFETCH window: e0000000-e7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:00.0
IO window: 00004000-000040ff
IO window: 00004400-000044ff
PREFETCH window: e8000000-ebffffff
MEM window: c4000000-c7ffffff
PCI: Bus 7, cardbus bridge: 0000:02:00.1
IO window: 00004800-000048ff
IO window: 00004c00-00004cff
PREFETCH window: ec000000-efffffff
MEM window: c8000000-cbffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-8fff
MEM window: c0200000-cfffffff
PREFETCH window: e8000000-efffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low)
-> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (bad gzip magic numbers); looks
like an initrd
Freeing initrd memory: 4936k freed
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
audit(1203619691.188:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial 00:09: activated
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low)
-> IRQ 11
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
Linux telephony interface: v1.00
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4936KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
input: AT Translated Set 2 keyboard as /class/input/input0
Freeing unused kernel memory: 188k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH4: IDE controller (0x8086:0x24ca rev 0x01) at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low)
-> IRQ 11
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: IC25N040ATMR04-0, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHSe535/16/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
You didn't specify the type of your ufs filesystem

mount -t ufs -o
ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openste p ...

>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is
ufstype=old
ufs_read_super: bad magic number
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
Real Time Clock Driver v1.12ac
intel_rng: FWH not detected
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.102
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 256M @ 0xd0000000
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low)
-> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: Thermal Zone [THM0] (23 C)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low)
-> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input5
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low)
-> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
parport_pc 00:0a: activated
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low)
-> IRQ 11
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
airo(): Probing for PCI adapters
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low)
-> IRQ 11
airo(): Found an MPI350 card
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /class/input/input6
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:
1d.1-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
padlock: VIA PadLock not detected.
airo(): WPA is supported.
airo(eth0): MAC enabled 00:02:8a:dd:c0:51
airo(): Finished probing for PCI adapters
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low)
-> IRQ 11
e100: eth1: e100_probe: addr 0xc0204000, irq 11, MAC addr
00:0d:60:77:5a:91
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low)
-> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0532]
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
Yenta: CardBus bridge found at 0000:02:00.1 [1014:0532]
Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
ACPI: PCI Interrupt 0000:02:00.2[C] -> Link [LNKC] -> GSI 11 (level, low)
-> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]
MMIO=[c0205000-c02057ff] Max Packet=[2048] IR/IT contexts=[4/4]
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low)
-> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 50418 usecs
intel8x0: clocking to 48000
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b020122403a]
Adding 1389580k swap on /dev/hda5. Priority:-1 extents:1 across:1389580k
EXT3 FS on hda1, internal journal
loop: module loaded
SCSI subsystem initialized
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised:
starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Clocksource tsc unstable (delta = -249873388 ns)
e100: eth2: e100_watchdog: link up, 100Mbps, full-duplex
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low)
-> IRQ 11
[drm] Initialized radeon 1.28.0 20060524 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 2 usecs



Et ton /etc/fstab.:





# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda1 / ext3 defaults,errors=remount-ro 0 1
/dev/hda6 /home ext3 defaults 0 2
/dev/hda5 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0

------=_Part_2985_17141399.1203619964357
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

On Thu, Feb 21, 2008 at 04:30:08PM +0100, gregoonix greg wrote: 19:52 ~% dmesg &nbsp;BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)<br>&nbsp;BI OS-e820: 00000000000d2000 - 00000000000d4000 (reserved)<br>&nbsp;BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)<br>&nbsp;BIOS-e820: 0000000 000100000 - 000000005ff60000 (usable)<br>
&nbsp;BIOS-e820: 000000005ff60000 - 000000005ff78000 (ACPI data)<br>&nbsp;B IOS-e820: 000000005ff78000 - 000000005ff7a000 (ACPI NVS)<br>&nbsp;BIOS-e820 : 000000005ff80000 - 0000000060000000 (reserved)<br>&nbsp;BIOS-e820: 000000 00ff800000 - 0000000100000000 (reserved)<br>
639MB HIGHMEM available. Movable zone start PFN for each node<br>early_node_map[1] active PFN ranges <br>&nbsp;&nbsp;&nbsp; 0:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 -&gt; &nbsp;&nbsp; 393056<br>On node 0 totalpages: 393056<br>&nbsp; DMA zone: 32 pages used for memmap<br>&nbsp; DMA zone: 0 pages reserved<br>&nbsp; DMA zo ne: 4064 pages, LIFO batch:0<br>
&nbsp; Normal zone: 1760 pages used for memmap<br>&nbsp; Normal zone: 22352 0 pages, LIFO batch:31<br>&nbsp; HighMem zone: 1278 pages used for memmap<b r>&nbsp; HighMem zone: 162402 pages, LIFO batch:31<br>&nbsp; Movable zone: 0 pages used for memmap<br>
DMI present.<br>ACPI: RSDP 000F6B40, 0024 (r2 IBM&nbsp;&nbsp; )<br>ACPI: XS DT 5FF6B321, 004C (r1 IBM&nbsp;&nbsp;&nbsp; TP-1Q&nbsp;&nbsp;&nbsp;&nbsp;&n bsp;&nbsp;&nbsp; 2140&nbsp; LTP&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0 )<br>ACPI: FACP 5FF6B400, 00F4 (r3 IBM&nbsp;&nbsp;&nbsp; TP-1Q&nbsp;&nbsp;& nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2140 IBM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& nbsp;&nbsp; 1)<br>ACPI Warning (tbfadt-0442): Optional field &quot;Gpe1Bloc k&quot; has zero address or length: 000000000000102C/0 [20070126]<br>
ACPI: DSDT 5FF6B5E7, C881 (r1 IBM&nbsp;&nbsp;&nbsp; TP-1Q&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; 2140 MSFT&nbsp; 100000E)<br>ACPI: FACS 5FF79000, 0 040<br>ACPI: SSDT 5FF6B5B4, 0033 (r1 IBM&nbsp;&nbsp;&nbsp; TP-1Q&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2140 MSFT&nbsp; 100000E)<br>ACPI: ECDT 5FF7 7E68, 0052 (r1 IBM&nbsp;&nbsp;&nbsp; TP-1Q&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb sp;&nbsp; 2140 IBM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1)<br>
ACPI: TCPA 5FF77EBA, 0032 (r1 IBM&nbsp;&nbsp;&nbsp; TP-1Q&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp; 2140 PTL&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; 1)<br>ACPI: BOOT 5FF77FD8, 0028 (r1 IBM&nbsp;&nbsp;&nbsp; TP-1Q&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2140&nbsp; LTP&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp; 1)<br>ACPI: PM-Timer IO Port: 0x1008<br>Allocating PCI resources starting at 70000000 (gap: 60000000:9f800000)<br>
Built 1 zonelists in Zone order, mobility grouping on.&nbsp; Total pages: 3 89986 Initializing CPU#0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)<br>Memory: 1 550204k/1572224k available (1620k kernel code, 20740k reserved, 663k data, 188k init, 654720k highmem)<br>virtual kernel memory layout:<br>&nbsp;&nbsp ;&nbsp; fixmap&nbsp; : 0xfffe9000 - 0xfffff000&nbsp;&nbsp; (&nbsp; 88 kB)<b r>
&nbsp;&nbsp;&nbsp; pkmap&nbsp;&nbsp; : 0xff800000 - 0xffc00000&nbsp;&nbsp; (4096 kB) &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; .text : 0xc0100000 - 0xc029537a&nbsp;&nbsp; (1620 kB) SELinux:&nbsp; Disabled at boot.<br>Capability LSM initialized<br>Mount-cac he hash table entries: 512<br>CPU: After generic identify, caps: a7e9f9bf 0 0000000 00000000 00000000 00000180 00000000 00000000 00000000<br>CPU: L1 I cache: 32K, L1 D cache: 32K<br>
CPU: L2 cache: 1024K Compat vDSO mapped to ffffe000. net_namespace: 64 bytes ACPI: EC: EC description table is found, configuring boot EC<br>ACPI: EC: n on-query interrupt received, switching to interrupt mode<br>ACPI: Interpret er enabled<br>ACPI: (supports S0 S3 S5)<br>ACPI: Using PIC for interrupt ro uting<br>
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62<br>ACPI : EC: driver started in poll mode<br>ACPI: PCI Root Bridge [PCI0] (0000:00) <br>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO<br>PCI quirk: region 1180-11bf claimed by ICH4 GPIO<br>
PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)<br>ACPI: PCI Inte rrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)<br>ACPI: PCI Interrupt Link [LN KD] (IRQs 3 4 5 6 7 9 10 *11)<br>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)<br>
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: Power Resource [PUBS] (on) ACPI: ACPI bus type pnp unregistered NET: Registered protocol family 20 system 00:00: iomem range 0xc8000-0xcbfff could not be reserved<br>system 0 0:00: iomem range 0xcc000-0xcffff could not be reserved<br>system 00:00: io mem range 0xd0000-0xd3fff could not be reserved<br>system 00:00: iomem rang e 0x0-0x0 could not be reserved<br>
system 00:00: iomem range 0x0-0x0 could not be reserved<br>system 00:00: io mem range 0xdc000-0xdffff has been reserved<br>system 00:00: iomem range 0x e0000-0xe3fff could not be reserved<br>system 00:00: iomem range 0xe4000-0x e7fff could not be reserved<br>
system 00:00: iomem range 0xe8000-0xebfff could not be reserved<br>system 0 0:02: ioport range 0x1000-0x107f has been reserved<br>system 00:02: ioport range 0x1180-0x11bf has been reserved<br>system 00:02: ioport range 0x15e0- 0x15ef has been reserved<br>
system 00:02: ioport range 0x1600-0x167f has been reserved &nbsp; IO window: 00004000-000040ff &nbsp; IO window: 00004c00-00004cff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)<br>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)<br>TCP: Hash table s configured (established 131072 bind 65536)<br>TCP reno registered<br>
checking if image is initramfs...it isn&#39;t (bad gzip magic numbers); loo ks like an initrd<br>Freeing initrd memory: 4936k freed<br>Simple Boot Flag at 0x35 set to 0x1<br>audit: initializing netlink socket (disabled)<br>
audit(1203619691.188:1): initialized io scheduler deadline registered isapnp: No Plug &amp; Play device found ACPI: PCI interrupt for device 0000:00:1f.6 disabled<br>RAMDISK driver init ialized: 16 RAM disks of 8192K size 1024 blocksize<br>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12<br>serio: i8042 KBD port at 0x60,0x64 irq 1<br>
serio: i8042 AUX port at 0x60,0x64 irq 12 Using IPI Shortcut mode Freeing unused kernel memory: 188k freed PCI: Enabling device 0000:00:1f.1 (0005 -&gt; 0007) &nbsp;&nbsp;&nbsp; ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, h db:pio hda: UDMA/100 mode selected hda: cache flushes supported input: PC Speaker as /class/input/input1 Linux agpgart interface v0.102 input: Power Button (FF) as /class/input/input2<br>ACPI: Power Button (FF) [PWRF]<br>input: Lid Switch as /class/input/input3<br>ACPI: Lid Switch [LID ]<br>input: Sleep Button (CM) as /class/input/input4<br>ACPI: Sleep Button (CM) [SLPB]<br>
agpgart: Detected an Intel 855PM Chipset. PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb1: configuration #1 chosen from 1 choice PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb2: configuration #1 chosen from 1 choice PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb3: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:00:1d.7[D] -&gt; Link [LNKH] -&gt; GSI 11 (level, low) -&gt; IRQ 11 ehci_hcd 0000:00:1d.7: debug port 1 parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] ACPI: PCI Interrupt 0000:00:1f.3[B] -&gt; Link [LNKB] -&gt; GSI 11 (level, low) -&gt; IRQ 11 airo(): Found an MPI350 card Marking TSC unstable due to: possible TSC halt in C2. usbcore: registered new interface driver usbhid airo(): Finished probing for PCI adapters ACPI: PCI Interrupt 0000:00:1f.6[B] -&gt; Link [LNKB] -&gt; GSI 11 (level, low) -&gt; IRQ 11 Socket status: 30000006 Yenta: CardBus bridge found at 0000:02:00.1 [1014:0532] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]&nbsp; MMIO=[c0205000- c02057ff]&nbsp; Max Packet=[2048]&nbsp; IR/IT contexts=[4/4] cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 intel8x0: clocking to 48000 SCSI subsystem initialized EXT3-fs: mounted filesystem with ordered data mode. [drm] Initialized radeon 1.28.0 20060524 on minor 0 [drm] Setting GART location based on new memory map proc&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; /pro c&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; proc&nbsp;&nb sp;&nbsp; defaults&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;& nbsp;&nbsp;&nbsp;&nbsp; 0<br>/dev/hda1&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; /&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n bsp;&nbsp; ext3&nbsp;&nbsp;&nbsp; defaults,errors=remount-ro 0&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp; 1<br>/dev/hda6&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ; /home&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ext3&nb sp;&nbsp;&nbsp; defaults&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;& nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 2<br>/dev/hda5&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;& nbsp; none&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ; swap&nbsp;&nbsp;&nbsp; sw&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0<br>
/dev/hdc&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; /media/cdrom0&nbsp;&nbsp ; iso9660 ro,user,noauto&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp;&nbsp;& nbsp;&nbsp; 0<br>/dev/fd0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; /media/ floppy0&nbsp; auto&nbsp;&nbsp;&nbsp; rw,user,noauto&nbsp; 0&nbsp;&nbsp;&nbs p;&nbsp;&nbsp;&nbsp; 0 <br></div><br></div><br>

------=_Part_2985_17141399.1203619964357--


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Sébastien NOBILI
Le #9647681
Le jeudi 21 février 08 à 19:52, gregoonix greg a écrit :
[...]
| ICH4: not 100% native mode: will probe irqs later
| ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
| ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
| Probing IDE interface ide0...
| hda: IC25N040ATMR04-0, ATA DISK drive
| hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
| hda: UDMA/100 mode selected
| ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
| Probing IDE interface ide1...
| Probing IDE interface ide1...
| hda: max request size: 128KiB
| hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHSe535/16/63
| hda: cache flushes supported
| hda: hda1 hda2 < hda5 hda6 >
| You didn't specify the type of your ufs filesystem
| mount -t ufs -o
| ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep
| ...
| >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is
| ufstype=old
| ufs_read_super: bad magic number
| kjournald starting. Commit interval 5 seconds
| EXT3-fs: mounted filesystem with ordered data mode.

Apparemment il y a tentative de montage en UFS puis montage en ext3
(mais est-ce bien la même partition ?).
Le système a détecté une partition hda2 mais elle n'apparaît pas dans le
fstab. Est-ce normal ? À quoi correspond cette partition ? Une fois le
système démarré, est-elle montée ?

Seb


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
gregoonix greg
Le #9647671
------=_Part_5853_20898938.1203670830561
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Apparemment il y a tentative de montage en UFS puis montage en ext3

(mais est-ce bien la même partition ?).
Le système a détecté une partition hda2 mais elle n'apparaît pas dans le
fstab. Est-ce normal ? À quoi correspond cette partition ? Une fois le
système démarré, est-elle montée ?

voici le détail du cfdisk :





cfdisk 2.12r

Disk Drive: /dev/hda
Size: 40007761920 bytes, 40.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 4864

Name Flags Part Type FS Type [Label] Size
(MB)
-------------------------------------------------------------------------- ----
hda1 Boot Primary Linux ext3
6999,72
hda5 Logical Linux swap / Solaris
1422,98
hda6 Logical Linux ext3
31585,08

il n'y a pas de hda2 mais une partition solaris sur le swap

------=_Part_5853_20898938.1203670830561
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Apparemment il y a tentative de montage en UFS puis montage en ext3 Le système a détecté une partition hda2 mais elle n&#39;apparaît p as dans le <br>&nbsp;&nbsp;&nbsp; Name&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Flags &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Part Type&nbsp; FS Type&nbsp;&nbsp;&nbsp;&nb sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; [Label]&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs p;&nbsp; Size (MB)<br>&nbsp;----------------------------------------------- -------------------------------<br>&nbsp;&nbsp;&nbsp; hda1&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp; Boot&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Pr imary&nbsp;&nbsp; Linux ext3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n bsp;&nbsp;&nbsp; 6999,72<br>
&nbsp;&nbsp;&nbsp; hda5&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Logical&nbsp ;&nbsp; Linux swap / Solaris&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1422,98<br>&nbsp;&nbsp;&nbsp; hda6&nbsp;&nb sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Logical&nbsp;&nbsp; Linux ext3&nbsp;&nbsp;&n bsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp ;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 31585,08 <br></div><br>il n&#39 ;y a pas de hda2 mais une partition solaris sur le swap <br>
</div>

------=_Part_5853_20898938.1203670830561--


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Publicité
Poster une réponse
Anonyme