ArchLinux ne démarre plus qu'en console

Salut,

Le Sun, 22 Jan 2012 14:27:06 +0100, Une Bévue a écrit :

pas de X...

Que dit ?

grep '(EE|WW)' /var/log/Xorg.0.log

Voire aussi avec dmesg ou less /var/log/dmesg

--
Stéphane <http://pasdenom.info/fortune/>
Toute puissance est faible, à moins que d'être unie.
-+- Jean de La Fontaine (1621-1695),
Le Vieillard et ses Enfants (Fables IV.18) -+-

Hello,

Le 22/01/2012 14:27, Une Bévue a écrit :
je suis en console après

démarrage, ça m'affiche qqc du genre :


pas de X...

Je ne peux pas t'aider par manque de compétence, à moins que tu n'aies
désinstallé gdm ou kdm etc.

Mais, je voulais juste te dire qu'il m'arrive d'installer des
distribution "en dur" sur des clé ou disque usb. Ceci permet de démarrer
plus vite et de personnaliser l'installation.

J'ai encore fait cela pour mon voisin débutant qui ne s'en sortait pas
avec son windows et son portable tout neuf (et auquel il ne préfère pas
toucher).


--
jp willm
http://perso.orange.fr/willms/index.html

Le 22/01/2012 16:56, jp willm a écrit :

Je ne peux pas t'aider par manque de compétence, à moins que tu n'aies
désinstallé gdm ou kdm etc.

Mais, je voulais juste te dire qu'il m'arrive d'installer des
distribution "en dur" sur des clé ou disque usb. Ceci permet de démarrer
plus vite et de personnaliser l'installation.

J'ai encore fait cela pour mon voisin débutant qui ne s'en sortait pas
avec son windows et son portable tout neuf (et auquel il ne préfère pas
toucher).

oui, je pense que c'est ce que je ferai demain après-midi, j'installerai
en dur sur ma clé USB CTKArchLinux à partir d'un autre linux : Xubuntu.

Le 22/01/2012 15:10, yamo a écrit :

Que dit ?

grep '(EE|WW)' /var/log/Xorg.0.log

[ 303.905] Current Operating System: Linux ctkarch 2.6.37-ARCH #1 SMP
PREEMPT Fri Mar 25 15:10:00 CET 2011 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 303.912] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 303.912] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/100dpi/".
[ 303.912] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/75dpi/".
[ 303.914] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file
or directory)
[ 303.924] (II) Loading extension MIT-SCREEN-SAVER
[ 303.991] (WW) Falling back to old probe method for vesa
[ 303.991] (WW) Falling back to old probe method for fbdev
[ 304.846] (WW) Option "xkb_variant" requires an string value
[ 304.846] (WW) Option "XkbVariant" requires an string value
[ 304.893] (WW) Option "xkb_variant" requires an string value
[ 304.893] (WW) Option "XkbVariant" requires an string value
[ 304.903] (WW) Option "xkb_variant" requires an string value
[ 304.903] (WW) Option "XkbVariant" requires an string value
[ 304.943] (WW) Option "xkb_variant" requires an string value
[ 304.943] (WW) Option "XkbVariant" requires an string value
[ 304.943] (EE) Logitech USB Receiver: failed to initialize for
relative axes.
[ 304.970] (WW) Option "xkb_variant" requires an string value
[ 304.970] (WW) Option "XkbVariant" requires an string value
[ 305.373] (EE) Query no Synaptics: 6003C8
[ 305.373] (EE) AlpsPS/2 ALPS DualPoint TouchPad Unable to
query/initialize Synaptics hardware.
[ 305.413] (EE) PreInit returned NULL for "AlpsPS/2 ALPS DualPoint
TouchPad"
[ 305.440] (WW) Option "xkb_variant" requires an string value
[ 305.440] (WW) Option "XkbVariant" requires an string value

Voire aussi avec dmesg

c'est long :

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.37-ARCH (tobias@T-POWA-LX) (gcc version 4.5.2 20110127
(prerelease) (GCC) ) #1 SMP PREEMPT Fri Mar 25 15:10:00 CET 2011
Command line: archisolabel=CTKArch7 locale=fr_FR.UTF-8 keymap=fr-pc,fr-
quiet initrd=/boot/archiso.img BOOT_IMAGE=/boot/vmlinuz26
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf681400 (usable)
BIOS-e820: 00000000cf681400 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
DMI: Dell Inc. Latitude D620 /0FT292, BIOS A10 05/16/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==>
(reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0xcf681 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 0CF800000 mask FFF800000 uncachable
4 base 0CF700000 mask FFFF00000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cf681000
0000000000 - 00cf600000 page 2M
00cf600000 - 00cf681000 page 4k
kernel direct mapping tables up to cf681000 @ 1fffa000-20000000
RAMDISK: 7f793000 - 7ffff000
ACPI: RSDP 00000000000fc0c0 00014 (v00 DELL )
ACPI: RSDT 00000000cf68198a 00044 (v01 DELL M07 27D80510 ASL
00000061)
ACPI: FACP 00000000cf682800 00074 (v01 DELL M07 27D80510 ASL
00000061)
ACPI: DSDT 00000000cf683400 0519E (v01 INT430 SYSFexxx 00001001 INTL
20050624)
ACPI: FACS 00000000cf691c00 00040
ACPI: HPET 00000000cf682f00 00038 (v01 DELL M07 00000001 ASL
00000061)
ACPI: APIC 00000000cf683000 00068 (v01 DELL M07 27D80510 ASL
00000047)
ACPI: ASF! 00000000cf682c00 0005B (v16 DELL M07 27D80510 ASL
00000061)
ACPI: MCFG 00000000cf682fc0 0003E (v16 DELL M07 27D80510 ASL
00000061)
ACPI: TCPA 00000000cf683300 00032 (v01 DELL M07 27D80510 ASL
00000061)
ACPI: SLIC 00000000cf68309c 00176 (v01 DELL M07 27D80510 ASL
00000061)
ACPI: SSDT 00000000cf681a11 004DC (v01 PmRef CpuPm 00003000 INTL
20050624)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea0002dfffff] PMD ->
[ffff8800cba00000-ffff8800ce7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000cf681
On node 0 totalpages: 849424
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 11559 pages used for memmap
DMA32 zone: 833882 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at d0000000 (gap: d0000000:20000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff8800cf400000 s81664 r8192 d20736 u1048576
pcpu-alloc: s81664 r8192 d20736 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 837803
Kernel command line: archisolabel=CTKArch7 locale=fr_FR.UTF-8
keymap=fr-pc,fr- quiet initrd=/boot/archiso.img BOOT_IMAGE=/boot/vmlinuz26
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3327316k/3398148k available (3753k kernel code, 452k absent,
70380k reserved, 2000k data, 516k init)
SLUB: Genslabs, HWalignd, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 34078720 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1997.306 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 3996.05 BogoMIPS (lpjf57686)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without
the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20101013
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
TSC synchronization [CPU#0 -> CPU#1]:
Measured 4350053856 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7992.13 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff]
(base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning: Incorrect checksum in table [TCPA] - 0x00, should be 0x9A
(20101013/tbutils-314)
ACPI: SSDT 00000000cf6819ce 00043 (v01 LMPWR DELLLOM 00001001 INTL
20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00043 (v01 LMPWR DELLLOM 00001001 INTL
20050624)
ACPI: SSDT 00000000cf682138 00244 (v01 PmRef Cpu0Ist 00003000 INTL
20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00244 (v01 PmRef Cpu0Ist 00003000 INTL
20050624)
ACPI: SSDT 00000000cf681eed 001C6 (v01 PmRef Cpu0Cst 00003001 INTL
20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001C6 (v01 PmRef Cpu0Cst 00003001 INTL
20050624)
ACPI: SSDT 00000000cf68237c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL
20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL
20050624)
ACPI: SSDT 00000000cf6820b3 00085 (v01 PmRef Cpu1Cst 00003000 INTL
20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL
20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
ACPI: ACPI Dock Station Driver: 2 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs"
and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xefffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf4007000-0xf4007fff]
pci_root PNP0A03:00: host bridge window [mem 0xf400c000-0xfebfffff]
pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed00400-0xfed1ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff]
pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xeff00000-0xeff7ffff]
pci 0000:00:02.0: reg 14: [io 0xeff8-0xefff]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xefec0000-0xefefffff]
pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
pci 0000:00:02.1: reg 10: [mem 0xeff80000-0xefffffff]
pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xefebc000-0xefebffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xbf80-0xbf9f]
pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xbf60-0xbf7f]
pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xbf40-0xbf5f]
pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
pci 0000:00:1d.3: reg 20: [io 0xbf20-0xbf3f]
pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xffa80000-0xffa803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.2: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.2: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.2: reg 20: [io 0xbfa0-0xbfaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref]
(disabled)
pci 0000:0c:00.0: [8086:4222] type 0 class 0x000280
pci 0000:0c:00.0: reg 10: [mem 0xefdff000-0xefdfffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable
it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xefd00000-0xefdfffff]
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref]
(disabled)
pci 0000:09:00.0: [14e4:1600] type 0 class 0x000200
pci 0000:09:00.0: reg 10: [mem 0xefcf0000-0xefcfffff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable
it with 'pcie_aspm=force'
pci 0000:00:1c.2: PCI bridge to [bus 09-09]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xefc00000-0xefcfffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref]
(disabled)
pci 0000:03:01.0: [1217:6972] type 2 class 0x000607
pci 0000:03:01.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref]
(disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xefffffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf4007000-0xf4007fff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf400c000-0xfebfffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00400-0xfed1ffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xffafffff]
(subtractive decode)
pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge
0000:03 [bus 03-04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PXP0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 00000000cf681400 - 00000000cfffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009fbff]
pnp 00:00: [mem 0x0009fc00-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000cffff]
pnp 00:00: [mem 0x000e0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0xcf6813ff]
pnp 00:00: [mem 0xcf681400-0xcf6fffff]
pnp 00:00: [mem 0xcf700000-0xcf7fffff]
pnp 00:00: [mem 0xcf700000-0xcfefffff]
pnp 00:00: [mem 0xffb00000-0xffffffff]
pnp 00:00: [mem 0xfec00000-0xfec0ffff]
pnp 00:00: [mem 0xfee00000-0xfee0ffff]
pnp 00:00: [mem 0xfed20000-0xfed3ffff]
pnp 00:00: [mem 0xfed45000-0xfed9ffff]
pnp 00:00: [mem 0xffa80000-0xffa83fff]
pnp 00:00: [mem 0xf4000000-0xf4003fff]
pnp 00:00: [mem 0xf4004000-0xf4004fff]
pnp 00:00: [mem 0xf4005000-0xf4005fff]
pnp 00:00: [mem 0xf4006000-0xf4006fff]
pnp 00:00: [mem 0xf4008000-0xf400bfff]
pnp 00:00: [mem 0xf0000000-0xf3ffffff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000d0000-0x000dffff window]
pnp 00:01: [mem 0xd0000000-0xefffffff window]
pnp 00:01: [mem 0xf4007000-0xf4007fff window]
pnp 00:01: [mem 0xf400c000-0xfebfffff window]
pnp 00:01: [mem 0xfec10000-0xfecfffff window]
pnp 00:01: [mem 0xfed00400-0xfed1ffff window]
pnp 00:01: [mem 0xfed40000-0xfed44fff window]
pnp 00:01: [mem 0xfeda0000-0xfed9ffff window disabled]
pnp 00:01: [mem 0xfee10000-0xffafffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io 0x0092]
pnp 00:02: [io 0x00b2]
pnp 00:02: [io 0x0020-0x0021]
pnp 00:02: [io 0x00a0-0x00a1]
pnp 00:02: [irq 0 disabled]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x1000-0x1005]
pnp 00:02: [io 0x1008-0x100f]
pnp 00:02: disabling [io 0x1000-0x1005] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:02: disabling [io 0x1008-0x100f] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:03: [io 0xf400-0xf4fe]
pnp 00:03: [io 0x0086]
pnp 00:03: [io 0x00b3]
pnp 00:03: [io 0x1006-0x1007]
pnp 00:03: [io 0x100a-0x1059]
pnp 00:03: [io 0x1060-0x107f]
pnp 00:03: [io 0x1080-0x10bf]
pnp 00:03: [io 0x10c0-0x10df]
pnp 00:03: [io 0x1010-0x102f]
pnp 00:03: [io 0x0809]
pnp 00:03: disabling [io 0x1006-0x1007] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:03: disabling [io 0x100a-0x1059] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:03: disabling [io 0x1060-0x107f] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:03: disabling [io 0x1010-0x102f] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:04: [irq 12]
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:05: [io 0x0060]
pnp 00:05: [io 0x0064]
pnp 00:05: [io 0x0062]
pnp 00:05: [io 0x0066]
pnp 00:05: [irq 1]
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: [irq 8]
pnp 00:06: [io 0x0072-0x0077]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: [io 0x0063]
pnp 00:07: [io 0x0065]
pnp 00:07: [io 0x0067]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io 0x002e-0x002f]
pnp 00:08: [io 0x0c80-0x0caf]
pnp 00:08: [io 0x0cc0-0x0cff]
pnp 00:08: [io 0x004e-0x004f]
pnp 00:08: [io 0x0910-0x091f]
pnp 00:08: [io 0x0920-0x092f]
pnp 00:08: [io 0x0cbc-0x0cbf]
pnp 00:08: [io 0x0930-0x097f]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:09: [dma 4]
pnp 00:09: [io 0x0000-0x000f]
pnp 00:09: [io 0x0080-0x0085]
pnp 00:09: [io 0x0087-0x008f]
pnp 00:09: [io 0x00c0-0x00df]
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0090-0x0091]
pnp 00:09: [io 0x0093-0x009f]
pnp 00:09: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: [mem 0xfed00000-0xfed003ff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:0c: [irq 4]
pnp 00:0c: [io 0x03f8-0x03ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [mem 0xfed40000-0xfed44fff]
pnp 00:0d: [io 0x0cb0-0x0cbb]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000cffff] has been reserved
system 00:00: [mem 0x000e0000-0x000fffff] has been reserved
system 00:00: [mem 0x00100000-0xcf6813ff] could not be reserved
system 00:00: [mem 0xcf681400-0xcf6fffff] has been reserved
system 00:00: [mem 0xcf700000-0xcf7fffff] has been reserved
system 00:00: [mem 0xcf700000-0xcfefffff] could not be reserved
system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed9ffff] has been reserved
system 00:00: [mem 0xffa80000-0xffa83fff] could not be reserved
system 00:00: [mem 0xf4000000-0xf4003fff] has been reserved
system 00:00: [mem 0xf4004000-0xf4004fff] has been reserved
system 00:00: [mem 0xf4005000-0xf4005fff] has been reserved
system 00:00: [mem 0xf4006000-0xf4006fff] has been reserved
system 00:00: [mem 0xf4008000-0xf400bfff] has been reserved
system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0xf400-0xf4fe] has been reserved
system 00:03: [io 0x1080-0x10bf] has been reserved
system 00:03: [io 0x10c0-0x10df] has been reserved
system 00:03: [io 0x0809] has been reserved
system 00:08: [io 0x0c80-0x0caf] has been reserved
system 00:08: [io 0x0cc0-0x0cff] could not be reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0x0920-0x092f] has been reserved
system 00:08: [io 0x0cbc-0x0cbf] has been reserved
system 00:08: [io 0x0930-0x097f] has been reserved
system 00:0b: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:0d: [io 0x0cb0-0x0cbb] has been reserved
system 00:0d: [mem 0xfed40000-0xfed44fff] has been reserved
pci 0000:00:1e.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
pci 0000:00:1e.0: BAR 14: assigned [mem 0xe4000000-0xe9ffffff]
pci 0000:00:1c.0: BAR 14: assigned [mem 0xea000000-0xea1fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xea200000-0xea3fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xea400000-0xea5fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xea600000-0xea7fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xea000000-0xea1fffff]
pci 0000:00:1c.0: bridge window [mem 0xea200000-0xea3fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xefd00000-0xefdfffff]
pci 0000:00:1c.1: bridge window [mem 0xea400000-0xea5fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 09-09]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xefc00000-0xefcfffff]
pci 0000:00:1c.2: bridge window [mem 0xea600000-0xea7fffff 64bit pref]
pci 0000:03:01.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
pci 0000:03:01.0: BAR 16: assigned [mem 0xe4000000-0xe7ffffff]
pci 0000:03:01.0: BAR 0: assigned [mem 0xe8000000-0xe8000fff]
pci 0000:03:01.0: BAR 0: set to [mem 0xe8000000-0xe8000fff] (PCI address
[0xe8000000-0xe8000fff])
pci 0000:03:01.0: BAR 13: assigned [io 0x5000-0x50ff]
pci 0000:03:01.0: BAR 14: assigned [io 0x5400-0x54ff]
pci 0000:03:01.0: CardBus bridge to [bus 04-07]
pci 0000:03:01.0: bridge window [io 0x5000-0x50ff]
pci 0000:03:01.0: bridge window [io 0x5400-0x54ff]
pci 0000:03:01.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
pci 0000:03:01.0: bridge window [mem 0xe4000000-0xe7ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 03-04]
pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1e.0: bridge window [mem 0xe4000000-0xe9ffffff]
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: enabling device (0000 -> 0003)
pci 0000:03:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xefffffff]
pci_bus 0000:00: resource 9 [mem 0xf4007000-0xf4007fff]
pci_bus 0000:00: resource 10 [mem 0xf400c000-0xfebfffff]
pci_bus 0000:00: resource 11 [mem 0xfec10000-0xfecfffff]
pci_bus 0000:00: resource 12 [mem 0xfed00400-0xfed1ffff]
pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 14 [mem 0xfee10000-0xffafffff]
pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0b: resource 1 [mem 0xea000000-0xea1fffff]
pci_bus 0000:0b: resource 2 [mem 0xea200000-0xea3fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0c: resource 1 [mem 0xefd00000-0xefdfffff]
pci_bus 0000:0c: resource 2 [mem 0xea400000-0xea5fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:09: resource 1 [mem 0xefc00000-0xefcfffff]
pci_bus 0000:09: resource 2 [mem 0xea600000-0xea7fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xe4000000-0xe9ffffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe3ffffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xd0000000-0xefffffff]
pci_bus 0000:03: resource 9 [mem 0xf4007000-0xf4007fff]
pci_bus 0000:03: resource 10 [mem 0xf400c000-0xfebfffff]
pci_bus 0000:03: resource 11 [mem 0xfec10000-0xfecfffff]
pci_bus 0000:03: resource 12 [mem 0xfed00400-0xfed1ffff]
pci_bus 0000:03: resource 13 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:03: resource 14 [mem 0xfee10000-0xffafffff]
pci_bus 0000:04: resource 0 [io 0x5000-0x50ff]
pci_bus 0000:04: resource 1 [io 0x5400-0x54ff]
pci_bus 0000:04: resource 2 [mem 0xe0000000-0xe3ffffff pref]
pci_bus 0000:04: resource 3 [mem 0xe4000000-0xe7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8624k freed
audit: initializing netlink socket (disabled)
type 00 audit(1327249010.769:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 6515
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2012-01-22 16:16:51 UTC (1327249011)
Initalizing network drop monitor service
Freeing unused kernel memory: 516k freed
udev[37]: starting version 166
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
libata version 3.00 loaded.
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
pata_acpi 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_acpi 0000:00:1f.2: setting latency timer to 64
pata_acpi 0000:00:1f.2: PCI INT B disabled
uhci_hcd: USB Universal Host Controller Interface driver
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ata1.00: ATA-7: Hitachi HTS721080G9SA00, MC4OC10H, max UDMA/100
ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72108 MC4O PQ: 0 ANSI: 5
ata2.00: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462D, DE01, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM TSSTcorp CDRW/DVD TSL462D DE01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 1-4: new high speed USB device using ehci_hcd and address 3
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 2-2: new full speed USB device using uhci_hcd and address 2
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 2-2.3: new full speed USB device using uhci_hcd and address 3
hub 2-2.3:1.0: USB hub found
hub 2-2.3:1.0: 3 ports detected
usb 2-2.4: new full speed USB device using uhci_hcd and address 4
scsi 2:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0
ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 31752576 512-byte logical blocks: (16.2 GB/15.1 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
usb 2-2.3.2: new full speed USB device using uhci_hcd and address 5
UDF-fs: Partition marked readonly; forcing readonly mount
aufs 2.1-standalone.tree-37-20110124
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input1
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA
controller, please try module parameter "video.allow_duplicates=1"if the
current driver doesn't work.
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K
mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
udev[702]: starting version 166
udev[951]: starting version 166
input: PC Speaker as /devices/platform/pcspkr/input/input5
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
intel_rng: FWH not detected
ACPI: acpi_idle registered with cpuidle
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
leds_ss4200: no LED devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (70 C)
iTCO_vendor_support: vendor-support=0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ACPI: AC Adapter [AC] (on-line)
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat0 sec (nowayout=0)
wmi: Mapper loaded
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
input: Dell WMI hotkeys as /devices/virtual/input/input6
yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01c2]
yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst. If
you experience problems or performance issues, use the yenta_socket
parameter 'o2_speedup=off'
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input7
generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse
[Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/input/input8
generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11
Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tg3.c:v3.115 (October 14, 2010)
tg3 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
tg3 0000:09:00.0: setting latency timer to 64
tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM5752KFBG) rev 6002] (PCI
Express) MAC address 00:18:8b:b0:66:24
tg3 0000:09:00.0: eth0: attached PHY is 5752 (10/100/1000Base-T
Ethernet) (WireSpeed[1])
tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:09:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: irq 40 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 18
yenta_cardbus 0000:03:01.0: Socket status: 30000006
pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04
to #07
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [io
0x5000-0x5fff]
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem
0xe4000000-0xe9ffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4000000-0xe9ffffff:
excluding 0xe4000000-0xe81fffff
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge window: [mem
0xe0000000-0xe3ffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff:
excluding 0xe0000000-0xe3ffffff
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for
Linux, in-tree:s
iwl3945: Copyright(c) 2003-2010 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcffff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
input: HDA Intel Mic at Ext Left Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel HP Out at Ext Left Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:0c:00.0: irq 41 for MSI/MSI-X
ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input11
input: AlpsPS/2 ALPS DualPoint TouchPad as
/devices/platform/i8042/serio1/input/input12

Le 22/01/2012 17:40, Une Bévue a écrit :

oui, je pense que c'est ce que je ferai demain après-midi, j'installerai
en dur sur ma clé USB CTKArchLinux à partir d'un autre linux : Xubuntu.

Plutôt ceci : tu transferts l'iso de arch que tu trouves ici
http://www.archlinux.org/download/ sur une clé usb à l'aide de unetbootin

Ensuite tu démarres sur cette clé et tu installes sur l'autre clé
destinée à recevoir le système arch linux

--
http://perso.orange.fr/willms/index.html

Le 22/01/2012 18:46, jp willm a écrit :

Plutôt ceci : tu transferts l'iso de arch que tu trouves ici
http://www.archlinux.org/download/ sur une clé usb à l'aide de unetbootin

Ah ok, mais je prends quoi neinstall ou core ?
Je peux prendre la plus lourde de suite.
au fait je fais une seulle partition sur la première clé, j'imagine,
mais en ext2 ou FAT ?

Ensuite tu démarres sur cette clé et tu installes sur l'autre clé
destinée à recevoir le système arch linux

OK, OK, je voius très bien la manip, heureusement j'ai des clés en réserve.

Déjà une utilisée en permanence pour Debian / CrunchBang...

Le Sun, 22 Jan 2012 18:46:24 +0100, jp willm a écrit :

Le 22/01/2012 17:40, Une Bévue a écrit :

oui, je pense que c'est ce que je ferai demain après-midi,
j'installerai en dur sur ma clé USB CTKArchLinux à partir d'un autre
linux : Xubuntu.

Plutôt ceci : tu transferts l'iso de arch que tu trouves ici
http://www.archlinux.org/download/ sur une clé usb à l'aide de
unetbootin

Ensuite tu démarres sur cette clé et tu installes sur l'autre clé
destinée à recevoir le système arch linux

Pour info, l'iso d'arch est hybride, donc, unetbootin est inutile, un simple dd suffit.

Le 22/01/2012 18:59, Frederic Bezies a écrit :

Pour info, l'iso d'arch est hybride, donc, unetbootin est inutile, un simple dd suffit.

c'est vrai, merci j'avais déjà fait ça avec CTKArch...

Le 22/01/2012 18:46, jp willm a écrit :

Plutôt ceci : tu transferts l'iso de arch que tu trouves ici
http://www.archlinux.org/download/ sur une clé usb à l'aide de unetbootin

Ensuite tu démarres sur cette clé et tu installes sur l'autre clé
destinée à recevoir le système arch linux

C'est fait et ça marche super bien, encore merci.

seul bémol, quand je démarre sur la clé ainsi installée, grub me dit ne
pas trouver le disque (hda2, 0) (de mémoire).

bon quand j'ai installé arch sur ma clé USB j'avais trois "disques" sur
mon système :

sda le disque dur interne sous Xubuntu
sdb une clé USB 2 Go où j'ai copié avec UNetbootin l'iso Arch
sdc une clé USB 4 Go sur laquelle j'ai installé Arch

mais bon sdb ou sdc ça ne veut pas dire grand chose vu que quand j'ai
démarré sur la clé "sdc" j'avais déconnecté la clé "sdb".

je pense que je devrai utiliser l'UUID et donc devrai modifier un
fichier de conf de grub.

Le 23/01/2012 09:01, Une Bévue a écrit :

C'est fait et ça marche super bien, encore merci.

J'ai peut-être bien fait de t'en parler :o)

seul bémol, quand je démarre sur la clé ainsi installée, grub me dit ne
pas trouver le disque (hda2, 0) (de mémoire).

Démarre sur ta clé et en root tu fais update-grub

En général, j'installe grub sur la racine de la clé pour ne pas
interférer avec celui du disque dur.

grub-install /dev/sdx ( x indique le "disque" amovible)


--
http://perso.orange.fr/willms/index.html