IRQ Conflict Routing et Pas de Connexion réseau bien que bonne Configuration des Paramètres

Bonjour NG,



J'ai installé sur mon PC comme 2eme OS après Win Xp Pro, Mandrake 10.0
Official: L'installation s'est bien déroulée, mais lorsque j'ai voulu me
connecter, s'est affiché Network is not working. >Tous les périphériques
ont été reconnuesJe ne sais plus où donner la tête, j'ai réinstallé n fois
sans amélioration. Le protokoll dmesg permet de contastter qu'il y un
conflit d'interrupts, mais je ne sais pas comment résoudre le pro.

Il ya 2 mois j'avais Windows 200 Pro et Mandrake 10.0 Community et tout
marchait à merveille. Je suis encore en train decouvrir Linux, ça fait 3
semaines que je lutte avec, c'est pas très encourageant pour un debutant.



Machine: Athlon XP 1700+, 512 MB, Asus A7V8x (KT400), Toshiba Lecteur DVD,
Graveur Yamaha, Carte réseau on Board (sur la carte mère) de Broadcom: BM
4401, Soundchip on Board Realtek A650 et carte son PCI Terratec 512 i
Digital, ATI Radeon 9000 Carte AGP.



Si quelqu'un a une idée, j'en serai reconnaissant. J'ai déjà essayé
acpi=off, noapic, nolapic sans aucune amélioration.





Steve





Contenu de dmesg:



[godfather@koloss godfather]$ dmesg

Linux version 2.6.3-7mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2
(Mandrake Linux 10.0 3.3.2-6mdk)) #1 Wed Mar 17 15:56:42 CET 2004

BIOS-provided physical RAM map:

BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)

BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)

BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)

BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)

511MB LOWMEM available.

On node 0 totalpages: 131068

DMA zone: 4096 pages, LIFO batch:1

Normal zone: 126972 pages, LIFO batch:16

HighMem zone: 0 pages, LIFO batch:1

DMI 2.3 present.

Built 1 zonelists

Kernel command line: root=/dev/hda7 noapic nolapic devfs=mount acpi=off
splash=silent vga=788

bootsplash: silent mode.

Initializing CPU#0

PID hash table entries: 2048 (order 11: 16384 bytes)

Detected 1459.817 MHz processor.

Using tsc for high-res timesource

Console: colour dummy device 80x25

Memory: 514916k/524272k available (1816k kernel code, 8620k reserved, 849k
data, 272k init, 0k highmem)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

Calibrating delay loop... 2875.39 BogoMIPS

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd

Freeing initrd memory: 134k freed

CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000

CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 256K (64 bytes/line)

CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#0.

CPU: AMD Athlon(TM) XP 1700+ stepping 01

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Checking 'hlt' instruction... OK.

POSIX conformance testing by UNIFIX

NET: Registered protocol family 16

EISA bus registered

PCI: PCI BIOS revision 2.10 entry at 0xf1ad0, last bus=1

PCI: Using configuration type 1

mtrr: v2.0 (20020519)

ACPI: Subsystem revision 20040211

ACPI: Interpreter disabled.

Linux Plug and Play Support v0.97 (c) Adam Belay

PnPBIOS: Disabled

PCI: Probing PCI hardware

PCI: Probing PCI hardware (bus 00)

PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0

vesafb: framebuffer at 0xdc000000, mapped to 0xe0800000, size 16384k

vesafb: mode is 800x600x16, linelength=1600, pages=67

vesafb: protected mode interface info at c000:56ba

vesafb: scrolling: redraw

vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0

fb0: VESA VGA frame buffer device

SBF: Simple Boot Flag extension found and enabled.

SBF: Setting boot flags 0x1

apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

ikconfig 0.7 with /proc/config*

VFS: Disk quotas dquot_6.5.1

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

Initializing Cryptographic API

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 14856
bytes, found (800x600, 14808 bytes, v3).

Console: switching to colour frame buffer device 92x32

pty: 1024 Unix98 ptys configured

Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled

ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

VP_IDE: IDE controller at PCI slot 0000:00:11.1

VP_IDE: chipset revision 6

VP_IDE: not 100% native mode: will probe irqs later

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1

ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio

ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA

hda: IC35L080AVVA07-0, ATA DISK drive

Using anticipatory io scheduler

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

hdc: YAMAHA CRW-F1E, ATAPI CD/DVD-ROM drive

hdd: TOSHIBA DVD-ROM SD-M1712, ATAPI CD/DVD-ROM drive

ide1 at 0x170-0x177,0x376 on irq 15

hda: max request size: 128KiB

hda: Host Protected Area detected.

current capacity is 160836479 sectors (82348 MB)

native capacity is 160836480 sectors (82348 MB)

hda: 160836479 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63,
UDMA(100)

/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >

mice: PS/2 mouse device common for all mice

serio: i8042 AUX port at 0x60,0x64 irq 12

input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1

serio: i8042 KBD port at 0x60,0x64 irq 1

input: AT Translated Set 2 keyboard on isa0060/serio0

md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27

EISA: Probing bus 0 at eisa0

NET: Registered protocol family 2

IP: routing cache hash table of 4096 buckets, 32Kbytes

TCP: Hash tables configured (established 32768 bind 65536)

NET: Registered protocol family 1

BIOS EDD facility v0.13 2004-Mar-09, 1 devices found

Please report your BIOS at http://linux.dell.com/edd/results.html

PM: Reading pmdisk image.

PM: Resume from disk failed.

md: Autodetecting RAID arrays.

md: autorun ...

md: ... autorun DONE.

RAMDISK: Compressed image found at block 0

VFS: Mounted root (ext2 filesystem).

Mounted devfs on /dev

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

Mounted devfs on /dev

Freeing unused kernel memory: 272k freed

Real Time Clock Driver v1.12

drivers/usb/core/usb.c: registered new driver usbfs

drivers/usb/core/usb.c: registered new driver hub

drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver
v2.1PCI: Found IRQ 3 for device 0000:00:10.0

IRQ routing conflict for 0000:00:10.0, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.1, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.2, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.3, have irq 9, want irq 3

uhci_hcd 0000:00:10.0: UHCI Host Controller

uhci_hcd 0000:00:10.0: irq 9, io base 0000b000

uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

PCI: Found IRQ 3 for device 0000:00:10.1

IRQ routing conflict for 0000:00:10.0, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.1, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.2, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.3, have irq 9, want irq 3

uhci_hcd 0000:00:10.1: UHCI Host Controller

uhci_hcd 0000:00:10.1: irq 9, io base 0000a800

uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

PCI: Found IRQ 3 for device 0000:00:10.2

IRQ routing conflict for 0000:00:10.0, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.1, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.2, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.3, have irq 9, want irq 3

uhci_hcd 0000:00:10.2: UHCI Host Controller

uhci_hcd 0000:00:10.2: irq 9, io base 0000a400

uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

PCI: Found IRQ 3 for device 0000:00:10.3

IRQ routing conflict for 0000:00:10.0, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.1, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.2, have irq 9, want irq 3

IRQ routing conflict for 0000:00:10.3, have irq 9, want irq 3

ehci_hcd 0000:00:10.3: EHCI Host Controller

ehci_hcd 0000:00:10.3: irq 9, pci mem e1805000

ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4

ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 6 ports detected

EXT3 FS on hda7, internal journal

Adding 514040k swap on /dev/hda8. Priority:-1 extents:1

Linux agpgart interface v0.100 (c) Dave Jones

agpgart: Detected VIA KT400/KT400A/KT600 chipset

agpgart: Maximum main memory to use for agp memory: 439M

agpgart: AGP aperture is 256M @ 0xe0000000

kjournald starting. Commit interval 5 seconds

EXT3 FS on hda9, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

Supermount version 2.0.4 for kernel 2.6

NTFS driver 2.1.6 [Flags: R/O MODULE].

NTFS volume version 3.1.

NTFS volume version 3.1.

b44.c:v0.92 (Nov 4, 2003)

PCI: Found IRQ 3 for device 0000:00:09.0

eth0: Broadcom 4400 10/100BaseT Ethernet 00:e0:18:db:7f:1a

inserting floppy driver for 2.6.3-7mdk

Floppy drive(s): fd0 is 1.44M

FDC 0 is a post-1991 82077

hdc: ATAPI 44X CD-ROM CD-R/RW CD-MRW drive, 8192kB Cache, UDMA(33)

Uniform CD-ROM driver Revision: 3.20

hdd: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)

ide-floppy driver 0.99.newide

drivers/usb/core/usb.c: registered new driver hiddev

drivers/usb/core/usb.c: registered new driver hid

drivers/usb/input/hid-core.c: v2.0:USB HID core driver

NET: Registered protocol family 17

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

b44: eth0: Link is down.

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

PCI: Found IRQ 4 for device 0000:00:11.5

IRQ routing conflict for 0000:00:11.5, have irq 9, want irq 4

PCI: Setting latency timer of device 0000:00:11.5 to 64

PCI: Found IRQ 11 for device 0000:00:0d.0

PCI: Sharing IRQ 11 with 0000:01:00.0

bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).

bootsplash: status on console 0 changed to on

bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).

bootsplash: status on console 1 changed to on

bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).

bootsplash: status on console 2 changed to on

bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).

bootsplash: status on console 3 changed to on

bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).

bootsplash: status on console 4 changed to on

bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943
bytes, v3).

bootsplash: status on console 5 changed to on

[drm] Initialized radeon 1.10.0 20020828 on minor 0: ATI Radeon If R250 9000

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.

agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode

agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode

[drm] Loading R200 Microcode

atkbd.c: Unknown key released (translated set 2, code 0x7a on
isa0060/serio0).

atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.

spurious 8259A interrupt: IRQ7.

SCSI subsystem initialized

st: Version 20040122, fixed bufsize 32768, s/g segs 256

NET: Registered protocol family 10

Disabled Privacy Extensions on device c035fe60(lo)

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

b44: eth0: BUG! Timeout waiting for bit 80000000 of register 428 to clear.

IPv6 over IPv4 tunneling driver

cdrom: This disc doesn't have any tracks I recognize!

cdrom: This disc doesn't have any tracks I recognize!

eth0: no IPv6 routers present

[godfather@koloss godfather]$