Twitter iPhone pliant OnePlus 11 PS5 Disney+ Orange Livebox Windows 11

k3b impossible de graver

3 réponses
Avatar
eric
bonjour impossible de graver avec k3b.

j'ai droit à mkisof ne s'est pas terminé correctement et
voilà ce que j'obtiens comme message.


System
-----------------------
K3b Version: 0.12

KDE Version: 3.4.2
QT Version: 3.3.5
Kernel: 2.6.12.3-686
Devices
-----------------------
BENQ DVD DD DW1620 B7S9 (/dev/hdd, ) at /media/cdrom0 [CD-R; CD-RW;
CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R
en mode séquentiel; DVD-RW en mode séquentiel; DVD+RW; DVD+R; DVD+R
Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO / R96R; RAW/R16;
RAW / R96R; Effacement restreint]

SONY CD-RW CRX0811 MYS2 (/dev/hdc, ) at /media/cdrom1 [CD-R; CD-RW;
CD-ROM] [Erreur] [SAO; TAO; RAW; SAO / R96P; SAO / R96R; RAW / R96P;
RAW / R96R]
K3b
-----------------------
Size of filesystem calculated: 345856

Used versions
-----------------------
mkisofs: 2.1.1a03-unofficial-iconv
cdrecord: 2.1.1a03

cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.12.3-686
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4
or Solaris.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/cdrecord: Warning: using inofficial version of libscg
(ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright
1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005
Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to
<cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this
version.
TOC Type: 1 = CD-ROM
Using libscg version 'ubuntu-0.8ubuntu1'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX0811 '
Revision : 'MYS2'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96P RAW/R96R
Drive buf size : 1658880 = 1620 KB
Drive DMA Speed: 8443 kB/s 47x CD 6x DVD
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. Cannot send SCSI cmd via ioctl
Track 01: data 675 MB
Total size: 775 MB (76:51.41) = 345856 sectors
Lout start: 776 MB (76:53/31) = 345856 sectors

cdrecord command:
-----------------------
/usr/bin/cdrecord.mmap -v gracetime=2 dev=/dev/hdc speed=4 -dao
driveropts=burnfree -eject -data -tsize=345856s -

mkisofs
-----------------------
345856
Warning: creating filesystem that does not conform to ISO-9660.
Warning: creating filesystem with (nonstandard) Joliet extensions
but without (standard) Rock Ridge extensions.
It is highly recommended to add Rock Ridge
Warning: creating filesystem that does not conform to ISO-9660.
Warning: creating filesystem with (nonstandard) Joliet extensions
but without (standard) Rock Ridge extensions.
It is highly recommended to add Rock Ridge
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset
-appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM
-publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-riri/k3bDMbhqa.tmp -joliet -joliet-long -hide-joliet-list
/tmp/kde-riri/k3b2DhmMa.tmp -full-iso9660-filenames -relaxed-filenames
-iso-level 2 -path-list /tmp/kde-riri/k3b08iIIb.tmp




si j'essaie en root, j'ai ça :



System
-----------------------
K3b Version: 0.12

KDE Version: 3.4.2
QT Version: 3.3.5
Kernel: 2.6.12.3-686
Devices
-----------------------
BENQ DVD DD DW1620 B7S9 (/dev/hdd, ) at /media/cdrom0 [CD-R; CD-RW;
CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R
en mode séquentiel; DVD-RW en mode séquentiel; DVD+RW; DVD+R; DVD+R
Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO / R96R; RAW/R16;
RAW / R96R; Effacement restreint]

SONY CD-RW CRX0811 MYS2 (/dev/hdc, ) at /media/cdrom1 [CD-R; CD-RW;
CD-ROM] [Erreur] [SAO; TAO; RAW; SAO / R96P; SAO / R96R; RAW / R96P;
RAW / R96R]
K3b
-----------------------
Size of filesystem calculated: 345857

Used versions
-----------------------
mkisofs: 2.1.1a03-unofficial-iconv
cdrecord: 2.1.1a03

cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.12.3-686
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4
or Solaris.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
/usr/bin/cdrecord: Warning: using inofficial version of libscg
(ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright
1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005
Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to
<cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this
version.
TOC Type: 1 = CD-ROM
Using libscg version 'ubuntu-0.8ubuntu1'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'SONY '
Identifikation : 'CD-RW CRX0811 '
Revision : 'MYS2'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96P RAW/R96R
Drive buf size : 1658880 = 1620 KB
Drive DMA Speed: 8455 kB/s 48x CD 6x DVD
FIFO size : 4194304 = 4096 KB
Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root?
: Operation not permitted
Track 01: data 675 MB
Total size: 775 MB (76:51.42) = 345857 sectors
Lout start: 776 MB (76:53/32) = 345857 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11078 (97:34/22)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 3 5
recommended erase/write power: 3
A1 values: 02 3A B0
A2 values: 5C C6 26
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 13992
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write in 3 seconds.
2 seconds.
1 seconds.
0 seconds. Operation starts.
/usr/bin/cdrecord: Caught interrupt.

cdrecord command:
-----------------------
/usr/bin/cdrecord.mmap -v gracetime=2 dev=/dev/hdc speed=4 -dao
driveropts=burnfree -eject -overburn -data -tsize=345857s -

mkisofs
-----------------------
345857
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset
-appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM
-publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
/tmp/kde-root/k3b06hrDb.tmp -rational-rock -hide-list
/tmp/kde-root/k3bdvAm1b.tmp -joliet -hide-joliet-list
/tmp/kde-root/k3bvVA8Ra.tmp -full-iso9660-filenames -iso-level 2
-path-list /tmp/kde-root/k3bzh934a.tmp



--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench

Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"

To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

3 réponses

Avatar
Jean-Luc Coulon (f5ibh)
--=-wPUrPeoxVKNl7gv7g5Dv
Content-Type: text/plain; charset=iso-8859-1; DelSp=Yes; Format=Flowed
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

Le 20.09.2005 13:44:21, eric a écrit :
bonjour impossible de graver avec k3b.

j'ai droit à mkisof ne s'est pas terminé correctement et
voilà ce que j'obtiens comme message.



J'ai l'impression que le dernier mkisofs est tout cassé.
J'en ai fait les frais avec k3b et gnomebaker.
Soit il ne se termine pas, soit il segfault.

J'ai réinstallé (sous sid) la version 2.01+01a01-4, celle-ci semble
fonctionner.

Jean-Luc

--=-wPUrPeoxVKNl7gv7g5Dv
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)

iD8DBQBDL/kgXit3lz9m7V4RAgSfAKDZ45MGI0rUVzIlj4pZpDP8pEhWQgCgyWoM
NTNRnFohO0yuFzV2asSLn8Y Ä6Z
-----END PGP SIGNATURE-----

--=-wPUrPeoxVKNl7gv7g5Dv--



--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench

Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Avatar
eric
Jean-Luc Coulon (f5ibh) a écrit :
Le 20.09.2005 13:44:21, eric a écrit :

bonjour impossible de graver avec k3b.

j'ai droit à mkisof ne s'est pas terminé correctement et
voilà ce que j'obtiens comme message.




J'ai l'impression que le dernier mkisofs est tout cassé.
J'en ai fait les frais avec k3b et gnomebaker.
Soit il ne se termine pas, soit il segfault.

J'ai réinstallé (sous sid) la version 2.01+01a01-4, celle-ci semble
fonctionner.

Jean-Luc




Je viens de downgrader mkisof et tout est rentré dans l'ordre.

Merci.


--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench

Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact
Avatar
CoolFox
This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--------------enig04BCCBDA16B1D299CB7F21B5
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: quoted-printable

eric a écrit :
Jean-Luc Coulon (f5ibh) a écrit :

Le 20.09.2005 13:44:21, eric a écrit :

bonjour impossible de graver avec k3b.

j'ai droit à mkisof ne s'est pas terminé correctement et
voilà ce que j'obtiens comme message.





J'ai l'impression que le dernier mkisofs est tout cassé.
J'en ai fait les frais avec k3b et gnomebaker.
Soit il ne se termine pas, soit il segfault.

J'ai réinstallé (sous sid) la version 2.01+01a01-4, celle-ci sembl e
fonctionner.

Jean-Luc





Je viens de downgrader mkisof et tout est rentré dans l'ordre.

Merci.




Je confirme que la mise a jour de la veille a mis en vrille mkisofs qui
ne parvient plus a calculer la taille lorsque j'utilise xcdroast.
Du coup, impossible de graver avec ce frontend

En revanche si je creé un iso dans un terminal, aucun souci et cdrecord
grave impec (vive la ligne de commande)

Donc ca va rester tel quel en attendant le correctif ou le prochain updat e.

@ ++

--
La vie c'est comme un concombre...
des fois tu l'as dans la main...
des fois tu l'as dans l'cul !

Paul Presbois (Poète avant-gardiste)


--------------enig04BCCBDA16B1D299CB7F21B5
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)

iD8DBQFDMHiDVZI/p353HiARAxyfAJ9VgwHLTanZZr32nA3HIIzm4bRT6QCff/Bl
TlhLFex91lXEGNo2YTrunWg =Yumd
-----END PGP SIGNATURE-----

--------------enig04BCCBDA16B1D299CB7F21B5--


--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench

Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact