bonjour,
j'utilise admt pour faire une migraztion de nt4 a 2003, le domaine source
approuve le domaine cible, le domaine cible approuve le domaine source, les
groups audit et le registre sont configuré comme l'indique
http://support.microsoft.com/default.aspx?scid=kb;fr;260871#3 ,mais lors de
la migration d'un utilisateur est des identifient SIDs, une fenetre
d'indentification s ouvre me demande le mots de pas le nom d'utilisateur du
domain source et la quand je renseigne et clic sur suivant j'ai un message
d'erreur : "Service d'authentification inconnu. (Code d'erreur=6d3)"
je ne comprend pas d'ou provient mon erreur
une idée ? merci
alban
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
Smain
Salut Alban
Pourriez-vous donner une description détaillée de votre environnement ?
Il y a plusieurs articles relatifs à "l'échec d'ouverture de session". Vous pouvez jeter un coup d'oeil et voir s'ils sont applicables. Entretemps, je demeure dans l'attente des informations sur votre environnement afin de voir si je pouvais vous accompagner vers la résolution de cette question.
243008 IIS 5.0 Does Not Start if Client for Microsoft Networks Is Uninstalled http://support.microsoft.com/?id$3008
249828 Unable to Log on to the Domain After Applying Windows NT 4.0 Service http://support.microsoft.com/?id$9828
259736 Partial RPC Entries May Cause Netlogon Error Messages http://support.microsoft.com/?id%9736
278416 Error Message: Could Not Start the (WWW, FTP, SMTP, and NNTP) Service on http://support.microsoft.com/?id'8416
816898 "A Phonebook Entry Cannot be Added: The Authentication Service Is http://support.microsoft.com/?id6898
Regards
Smain
"alban" wrote in message news:c8v0eh$4f3$ | bonjour, | j'utilise admt pour faire une migraztion de nt4 a 2003, le domaine source | approuve le domaine cible, le domaine cible approuve le domaine source, les | groups audit et le registre sont configuré comme l'indique | http://support.microsoft.com/default.aspx?scid=kb;fr;260871#3 ,mais lors de | la migration d'un utilisateur est des identifient SIDs, une fenetre | d'indentification s ouvre me demande le mots de pas le nom d'utilisateur du | domain source et la quand je renseigne et clic sur suivant j'ai un message | d'erreur : "Service d'authentification inconnu. (Code d'erreurm3)" | je ne comprend pas d'ou provient mon erreur | une idée ? merci | alban | |
Salut Alban
Pourriez-vous donner une description détaillée de votre environnement ?
Il y a plusieurs articles relatifs à "l'échec d'ouverture de session". Vous
pouvez jeter un coup d'oeil et voir s'ils sont applicables. Entretemps, je
demeure dans l'attente des informations sur votre environnement afin de voir
si je pouvais vous accompagner vers la résolution de cette question.
243008 IIS 5.0 Does Not Start if Client for Microsoft Networks Is
Uninstalled
http://support.microsoft.com/?id$3008
249828 Unable to Log on to the Domain After Applying Windows NT
4.0 Service
http://support.microsoft.com/?id$9828
259736 Partial RPC Entries May Cause Netlogon Error Messages
http://support.microsoft.com/?id%9736
278416 Error Message: Could Not Start the (WWW, FTP, SMTP, and
NNTP) Service on
http://support.microsoft.com/?id'8416
816898 "A Phonebook Entry Cannot be Added: The Authentication
Service Is
http://support.microsoft.com/?id6898
Regards
Smain
"alban" <abus@microsoft.fr> wrote in message
news:c8v0eh$4f3$1@news-reader1.wanadoo.fr...
| bonjour,
| j'utilise admt pour faire une migraztion de nt4 a 2003, le domaine source
| approuve le domaine cible, le domaine cible approuve le domaine source,
les
| groups audit et le registre sont configuré comme l'indique
| http://support.microsoft.com/default.aspx?scid=kb;fr;260871#3 ,mais lors
de
| la migration d'un utilisateur est des identifient SIDs, une fenetre
| d'indentification s ouvre me demande le mots de pas le nom d'utilisateur
du
| domain source et la quand je renseigne et clic sur suivant j'ai un message
| d'erreur : "Service d'authentification inconnu. (Code d'erreurm3)"
| je ne comprend pas d'ou provient mon erreur
| une idée ? merci
| alban
|
|
Pourriez-vous donner une description détaillée de votre environnement ?
Il y a plusieurs articles relatifs à "l'échec d'ouverture de session". Vous pouvez jeter un coup d'oeil et voir s'ils sont applicables. Entretemps, je demeure dans l'attente des informations sur votre environnement afin de voir si je pouvais vous accompagner vers la résolution de cette question.
243008 IIS 5.0 Does Not Start if Client for Microsoft Networks Is Uninstalled http://support.microsoft.com/?id$3008
249828 Unable to Log on to the Domain After Applying Windows NT 4.0 Service http://support.microsoft.com/?id$9828
259736 Partial RPC Entries May Cause Netlogon Error Messages http://support.microsoft.com/?id%9736
278416 Error Message: Could Not Start the (WWW, FTP, SMTP, and NNTP) Service on http://support.microsoft.com/?id'8416
816898 "A Phonebook Entry Cannot be Added: The Authentication Service Is http://support.microsoft.com/?id6898
Regards
Smain
"alban" wrote in message news:c8v0eh$4f3$ | bonjour, | j'utilise admt pour faire une migraztion de nt4 a 2003, le domaine source | approuve le domaine cible, le domaine cible approuve le domaine source, les | groups audit et le registre sont configuré comme l'indique | http://support.microsoft.com/default.aspx?scid=kb;fr;260871#3 ,mais lors de | la migration d'un utilisateur est des identifient SIDs, une fenetre | d'indentification s ouvre me demande le mots de pas le nom d'utilisateur du | domain source et la quand je renseigne et clic sur suivant j'ai un message | d'erreur : "Service d'authentification inconnu. (Code d'erreurm3)" | je ne comprend pas d'ou provient mon erreur | une idée ? merci | alban | |
alban
"Smain" a écrit dans le message de news:%
Salut Alban
Pourriez-vous donner une description détaillée de votre environnement ?
Il y a plusieurs articles relatifs à "l'échec d'ouverture de session". Vous
pouvez jeter un coup d'oeil et voir s'ils sont applicables. Entretemps, je
demeure dans l'attente des informations sur votre environnement afin de voir
si je pouvais vous accompagner vers la résolution de cette question.
Mon pb dois venir du fais que le serveur RPC ne marche pas sous windows net et je ne sais pas comment le réinstaller....
"Smain" <smain@whsmithnet.co.uk.REMOVE> a écrit dans le message de
news:%23il6apkQEHA.3596@tk2msftngp13.phx.gbl...
Salut Alban
Pourriez-vous donner une description détaillée de votre environnement ?
Il y a plusieurs articles relatifs à "l'échec d'ouverture de session".
Vous
pouvez jeter un coup d'oeil et voir s'ils sont applicables. Entretemps,
je
demeure dans l'attente des informations sur votre environnement afin de
voir
si je pouvais vous accompagner vers la résolution de cette question.
Mon pb dois venir du fais que le serveur RPC ne marche pas sous windows net
et je ne sais pas comment le réinstaller....
Pourriez-vous donner une description détaillée de votre environnement ?
Il y a plusieurs articles relatifs à "l'échec d'ouverture de session". Vous
pouvez jeter un coup d'oeil et voir s'ils sont applicables. Entretemps, je
demeure dans l'attente des informations sur votre environnement afin de voir
si je pouvais vous accompagner vers la résolution de cette question.
Mon pb dois venir du fais que le serveur RPC ne marche pas sous windows net et je ne sais pas comment le réinstaller....
Smain
Alban,
Je ne vous ai pas oublié. Je vous soumets ci-après la réponse intégrale de Mr William Wang, Microsoft Online Support Engineer, à la question liée au message d'erreur "Service d'authentification inconnu":
NB: Si vous vous n'êtes pas familier avec l'anglais, faites-moi signe.
Début de citation:
The error message "The Authentication service is unknown" indicates a RPC related error. Please check the following on both DCs:
1. Check if the RPC service is started. If not, start it and then test the problem again.
Registry ====== On the PDC in the source domain, verify that the TcpipClientSupport:REG_DWORD:0x1 value to the following registry key: HKEY_LOCAL_MACHINESystemCurrentControlSetControlLSA
Administrative Shares ======= Administrative shares must exist on the domain controller in the target domain on which you run ADMT, and on any computers on which an agent must be dispatched.
User Rights ======= You must log on to the computer on which you run ADMT with an account that has the following permissions:
* Domain Administrator rights in the target domain. * A member of the Administrators group in the source domain. * Administrator rights on each computer that you migrate. * Administrator rights on each computer on which you translate security.
You will have the appropriate rights when you log on to the PDC that is the FSMO role holder in the target domain with the Source DomainAdministrator account, assuming that the Source DomainDomain Administrators group is a member of the Administrators group on each computer. ~~~~~~~~~~
Fin de citation.
Bonne chance !
Smain
"alban" wrote in message news:c8v0eh$4f3$ | bonjour, | j'utilise admt pour faire une migraztion de nt4 a 2003, le domaine source | approuve le domaine cible, le domaine cible approuve le domaine source, les | groups audit et le registre sont configuré comme l'indique | http://support.microsoft.com/default.aspx?scid=kb;fr;260871#3 ,mais lors de | la migration d'un utilisateur est des identifient SIDs, une fenetre | d'indentification s ouvre me demande le mots de pas le nom d'utilisateur du | domain source et la quand je renseigne et clic sur suivant j'ai un message | d'erreur : "Service d'authentification inconnu. (Code d'erreurm3)" | je ne comprend pas d'ou provient mon erreur | une idée ? merci | alban | |
Alban,
Je ne vous ai pas oublié. Je vous soumets ci-après la réponse intégrale de
Mr William Wang, Microsoft Online Support Engineer, à la question liée au
message d'erreur "Service d'authentification inconnu":
NB: Si vous vous n'êtes pas familier avec l'anglais, faites-moi signe.
Début de citation:
The error message "The Authentication service is unknown" indicates a RPC
related error. Please check the following on both DCs:
1. Check if the RPC service is started. If not, start it and then test the
problem again.
Registry
====== On the PDC in the source domain, verify that the
TcpipClientSupport:REG_DWORD:0x1 value to the following registry key:
HKEY_LOCAL_MACHINESystemCurrentControlSetControlLSA
Administrative Shares
======= Administrative shares must exist on the domain controller in the target
domain on which you run ADMT, and on any computers on which an agent must be
dispatched.
User Rights
======= You must log on to the computer on which you run ADMT with an account that
has the following permissions:
* Domain Administrator rights in the target domain.
* A member of the Administrators group in the source domain.
* Administrator rights on each computer that you migrate.
* Administrator rights on each computer on which you translate security.
You will have the appropriate rights when you log on to the PDC that is the
FSMO role holder in the target domain with the Source DomainAdministrator
account, assuming that the Source DomainDomain Administrators group is a
member of the Administrators group on each computer.
~~~~~~~~~~
Fin de citation.
Bonne chance !
Smain
"alban" <abus@microsoft.fr> wrote in message
news:c8v0eh$4f3$1@news-reader1.wanadoo.fr...
| bonjour,
| j'utilise admt pour faire une migraztion de nt4 a 2003, le domaine source
| approuve le domaine cible, le domaine cible approuve le domaine source,
les
| groups audit et le registre sont configuré comme l'indique
| http://support.microsoft.com/default.aspx?scid=kb;fr;260871#3 ,mais lors
de
| la migration d'un utilisateur est des identifient SIDs, une fenetre
| d'indentification s ouvre me demande le mots de pas le nom d'utilisateur
du
| domain source et la quand je renseigne et clic sur suivant j'ai un message
| d'erreur : "Service d'authentification inconnu. (Code d'erreurm3)"
| je ne comprend pas d'ou provient mon erreur
| une idée ? merci
| alban
|
|
Je ne vous ai pas oublié. Je vous soumets ci-après la réponse intégrale de Mr William Wang, Microsoft Online Support Engineer, à la question liée au message d'erreur "Service d'authentification inconnu":
NB: Si vous vous n'êtes pas familier avec l'anglais, faites-moi signe.
Début de citation:
The error message "The Authentication service is unknown" indicates a RPC related error. Please check the following on both DCs:
1. Check if the RPC service is started. If not, start it and then test the problem again.
Registry ====== On the PDC in the source domain, verify that the TcpipClientSupport:REG_DWORD:0x1 value to the following registry key: HKEY_LOCAL_MACHINESystemCurrentControlSetControlLSA
Administrative Shares ======= Administrative shares must exist on the domain controller in the target domain on which you run ADMT, and on any computers on which an agent must be dispatched.
User Rights ======= You must log on to the computer on which you run ADMT with an account that has the following permissions:
* Domain Administrator rights in the target domain. * A member of the Administrators group in the source domain. * Administrator rights on each computer that you migrate. * Administrator rights on each computer on which you translate security.
You will have the appropriate rights when you log on to the PDC that is the FSMO role holder in the target domain with the Source DomainAdministrator account, assuming that the Source DomainDomain Administrators group is a member of the Administrators group on each computer. ~~~~~~~~~~
Fin de citation.
Bonne chance !
Smain
"alban" wrote in message news:c8v0eh$4f3$ | bonjour, | j'utilise admt pour faire une migraztion de nt4 a 2003, le domaine source | approuve le domaine cible, le domaine cible approuve le domaine source, les | groups audit et le registre sont configuré comme l'indique | http://support.microsoft.com/default.aspx?scid=kb;fr;260871#3 ,mais lors de | la migration d'un utilisateur est des identifient SIDs, une fenetre | d'indentification s ouvre me demande le mots de pas le nom d'utilisateur du | domain source et la quand je renseigne et clic sur suivant j'ai un message | d'erreur : "Service d'authentification inconnu. (Code d'erreurm3)" | je ne comprend pas d'ou provient mon erreur | une idée ? merci | alban | |