Debian Wheezy et driver «nouveau»

Le
Luxpopuli Open source
--14dae9341053b1857004ba9603b4
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Bonjour,

Je galère comme un dingue avec la configuration de la résolution de mon
écran IIYAMA B2403WS.
Cet écran à toujours très bien fonctionné en 1920x1200 sous Debian=
jusqu'à
ce que je souhaite utiliser le driver libre «nouveau» à la place des
drivers proprio.

Si je souhaite utiliser «nouveau» c'est parce que j'ai un gros problè=
me de
plantages intempestifs de mon PC depuis plusieurs mois. J'ai fait plusieurs
tests matériels et la dernière chose que je souhaite tester c'est de vi=
rer
le driver proprio au profit de «nouveau» pour voir si cela a une incide=
nce
sur mon problème.

Je viens de réinstaller une Debian Wheezy from scratch. C'est bien le
driver «nouveau» qui est utilisé mais impossible de dépasser 1024x7=
68 en
résolution.

Par ailleurs, impossible de créer un fichier xorg.conf. La commande Xorg
-configure crée un fichier xorg.conf.new que voici:

=
*Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/**cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:**unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:**unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-**conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection

Section "Module"
Load "dri"
Load "dri2"
Load "extmod"
Load "record"
Load "dbe"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Monitor"
Identifier "Monitor2"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "VideoKey" # <i>
#Option "WrappedFB" # [<bool>]
#Option "GLXVBlank" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "nouveau"
BusID "PCI:3:0:0"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # <str>
#Option "fbdev" # <str>
#Option "debug" # [<bool>]
Identifier "Card1"
Driver "fbdev"
BusID "PCI:3:0:0"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card2"
Driver "vesa"
BusID "PCI:3:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "Screen"* *
Identifier "Screen2"
Device "Card2"
Monitor "Monitor2"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection*
==

Lorsque je me connecte, voici le contenu de /var/log/Xorg.0.log

==
*[ 4287.580]
X.Org X Server 1.11.3.901 (1.11.4 RC 1)
Release Date: 2012-01-06
[ 4287.580] X Protocol Version 11, Revision 0
[ 4287.580] Build Operating System: Linux 3.2.0-rc6+ x86_64 Debian
[ 4287.580] Current Operating System: Linux esperance 3.2.0-1-amd64 #1 SMP
Fri Feb 17 05:17:36 UTC 2012 x86_64
[ 4287.580] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.**0-1-amd6=
4
root=UUID=5d11254e-e129-4d91-**b93c-37c7517a55f6 ro quiet
[ 4287.580] Build Date: 19 January 2012 09:53:39AM
[ 4287.580] xorg-server 2:1.11.3.901-2 (Cyril Brulebois <kibi@debian.org>)
[ 4287.580] Current version of pixman: 0.24.4
[ 4287.580] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4287.580] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4287.580] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 6
17:38:47 2012
[ 4287.581] (==) Using config file: "/etc/X11/xorg.conf"
[ 4287.581] (==) Using system config directory "/usr/share/X11/xorg.co=
nf.d"
[ 4287.581] (==) ServerLayout "Layout0"
[ 4287.581] (**) |-->Screen "Screen0" (0)
[ 4287.581] (**) | |-->Monitor "Monitor0"
[ 4287.581] (**) | |-->Device "Device0"
[ 4287.581] (**) |-->Input Device "Generic Keyboard"
[ 4287.581] (**) |-->Input Device "Configured Mouse"
[ 4287.581] (**) Option "Xinerama" "0"
[ 4287.581] (==) Automatically adding devices
[ 4287.581] (==) Automatically enabling devices
[ 4287.581] (WW) The directory "/usr/share/fonts/X11/**cyrillic" does not
exist.
[ 4287.581] Entry deleted from font path.
[ 4287.581] (WW) The directory
"/var/lib/defoma/x-ttcidfont-**conf.d/dirs/TrueType"
does not exist.
[ 4287.581] Entry deleted from font path.
[ 4287.581] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:**unscaled,
/usr/share/fonts/X11/75dpi/:**unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 4287.581] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4287.581] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse'
or 'vmmouse' will be disabled.
[ 4287.581] (WW) Disabling Generic Keyboard
[ 4287.581] (WW) Disabling Configured Mouse
[ 4287.581] (II) Loader magic: 0x7f3d14715ae0
[ 4287.581] (II) Module ABI versions:
[ 4287.581] X.Org ANSI C Emulation: 0.4
[ 4287.581] X.Org Video Driver: 11.0
[ 4287.581] X.Org XInput driver : 13.0
[ 4287.581] X.Org Server Extension : 6.0
[ 4287.583] (--) PCI:*(0:3:0:0) 10de:0421:1043:8245 rev 161, Mem @
0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @
0x0000cf00/128, BIOS @ 0x????????/131072
[ 4287.583] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4287.583] (II) "extmod" will be loaded. This was enabled by default and
also specified in the config file.
[ 4287.583] (II) "dbe" will be loaded. This was enabled by default and
also specified in the config file.
[ 4287.583] (II) "glx" will be loaded. This was enabled by default and
also specified in the config file.
[ 4287.583] (II) "record" will be loaded. This was enabled by default and
also specified in the config file.
[ 4287.583] (II) "dri" will be loaded by default.
[ 4287.583] (II) "dri2" will be loaded by default.
[ 4287.583] (II) LoadModule: "xtrap"
[ 4287.583] (WW) Warning, couldn't open module xtrap
[ 4287.583] (II) UnloadModule: "xtrap"
[ 4287.583] (II) Unloading xtrap
[ 4287.583] (EE) Failed to load module "xtrap" (module does not exist, 0)
[ 4287.583] (II) LoadModule: "extmod"
[ 4287.584] (II) Loading /usr/lib/xorg/modules/**extensions/libextmod.so
[ 4287.584] (II) Module extmod: vendor="X.Org Foundation"
[ 4287.584] compiled for 1.11.3.901, module version = 1.0.0
[ 4287.584] Module class: X.Org Server Extension
[ 4287.584] ABI class: X.Org Server Extension, version 6.0
[ 4287.584] (II) Loading extension SELinux
[ 4287.584] (II) Loading extension MIT-SCREEN-SAVER
[ 4287.584] (II) Loading extension XFree86-VidModeExtension
[ 4287.584] (II) Loading extension XFree86-DGA
[ 4287.584] (II) Loading extension DPMS
[ 4287.584] (II) Loading extension XVideo
[ 4287.584] (II) Loading extension XVideo-MotionCompensation
[ 4287.584] (II) Loading extension X-Resource
[ 4287.584] (II) LoadModule: "glx"
[ 4287.584] (II) Loading /usr/lib/xorg/modules/**extensions/libglx.so
[ 4287.584] (II) Module glx: vendor="X.Org Foundation"
[ 4287.584] compiled for 1.11.3.901, module version = 1.0.0
[ 4287.584] ABI class: X.Org Server Extension, version 6.0
[ 4287.584] (==) AIGLX enabled
[ 4287.584] (II) Loading extension GLX
[ 4287.585] (II) LoadModule: "record"
[ 4287.585] (II) Loading /usr/lib/xorg/modules/**extensions/librecord.so
[ 4287.585] (II) Module record: vendor="X.Org Foundation"
[ 4287.585] compiled for 1.11.3.901, module version = 1.13.0
[ 4287.585] Module class: X.Org Server Extension
[ 4287.585] ABI class: X.Org Server Extension, version 6.0
[ 4287.585] (II) Loading extension RECORD
[ 4287.585] (II) LoadModule: "dbe"
[ 4287.585] (II) Loading /usr/lib/xorg/modules/**extensions/libdbe.so
[ 4287.585] (II) Module dbe: vendor="X.Org Foundation"
[ 4287.585] compiled for 1.11.3.901, module version = 1.0.0
[ 4287.585] Module class: X.Org Server Extension
[ 4287.585] ABI class: X.Org Server Extension, version 6.0
[ 4287.585] (II) Loading extension DOUBLE-BUFFER
[ 4287.585] (II) LoadModule: "vbe"
[ 4287.585] (II) Loading /usr/lib/xorg/modules/libvbe.**so
[ 4287.585] (II) Module vbe: vendor="X.Org Foundation"
[ 4287.585] compiled for 1.11.3.901, module version = 1.1.0
[ 4287.585] ABI class: X.Org Video Driver, version 11.0
[ 4287.585] (II) LoadModule: "dri"
[ 4287.586] (II) Loading /usr/lib/xorg/modules/**extensions/libdri.so
[ 4287.586] (II) Module dri: vendor="X.Org Foundation"
[ 4287.586] compiled for 1.11.3.901, module version = 1.0.0
[ 4287.586] ABI class: X.Org Server Extension, version 6.0
[ 4287.586] (II) Loading extension XFree86-DRI
[ 4287.586] (II) LoadModule: "dri2"
[ 4287.586] (II) Loading /usr/lib/xorg/modules/**extensions/libdri2.so
[ 4287.586] (II) Module dri2: vendor="X.Org Foundation"
[ 4287.586] compiled for 1.11.3.901, module version = 1.2.0
[ 4287.586] ABI class: X.Org Server Extension, version 6.0
[ 4287.586] (II) Loading extension DRI2
[ 4287.586] (II) LoadModule: "nouveau"
[ 4287.586] (II) Loading /usr/lib/xorg/modules/drivers/**nouveau_drv.so
[ 4287.586] (II) Module nouveau: vendor="X.Org Foundation"
[ 4287.586] compiled for 1.11.2.901, module version = 0.0.16
[ 4287.586] Module class: X.Org Video Driver
[ 4287.586] ABI class: X.Org Video Driver, version 11.0
[ 4287.586] (II) NOUVEAU driver Date: Wed Nov 30 18:56:54 2011 +0100
[ 4287.586] (II) NOUVEAU driver for NVIDIA chipset families :
[ 4287.586] RIVA TNT (NV04)
[ 4287.587] RIVA TNT2 (NV05)
[ 4287.587] GeForce 256 (NV10)
[ 4287.587] GeForce 2 (NV11, NV15)
[ 4287.587] GeForce 4MX (NV17, NV18)
[ 4287.587] GeForce 3 (NV20)
[ 4287.587] GeForce 4Ti (NV25, NV28)
[ 4287.587] GeForce FX (NV3x)
[ 4287.587] GeForce 6 (NV4x)
[ 4287.587] GeForce 7 (G7x)
[ 4287.587] GeForce 8 (G8x)
[ 4287.587] GeForce GTX 200 (NVA0)
[ 4287.587] GeForce GTX 400 (NVC0)
[ 4287.587] (++) using VT number 7

[ 4287.588] drmOpenDevice: node name is /dev/dri/card0
[ 4287.588] drmOpenDevice: open result is 8, (OK)
[ 4287.588] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
[ 4287.588] drmOpenDevice: node name is /dev/dri/card0
[ 4287.588] drmOpenDevice: open result is 8, (OK)
[ 4287.588] drmOpenByBusid: drmOpenMinor returns 8
[ 4287.588] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
[ 4287.588] (II) [drm] nouveau interface version: 0.0.16
[ 4287.588] (II) Loading /usr/lib/xorg/modules/drivers/**nouveau_drv.so
[ 4287.588] (II) Loading sub module "dri"
[ 4287.588] (II) LoadModule: "dri"
[ 4287.589] (II) Loading /usr/lib/xorg/modules/**extensions/libdri.so
[ 4287.589] (II) Module dri: vendor="X.Org Foundation"
[ 4287.589] compiled for 1.11.3.901, module version = 1.0.0
[ 4287.589] ABI class: X.Org Server Extension, version 6.0
[ 4287.589] (II) NOUVEAU(0): Loaded DRI module
[ 4287.589] drmOpenDevice: node name is /dev/dri/card0
[ 4287.589] drmOpenDevice: open result is 9, (OK)
[ 4287.589] drmOpenDevice: node name is /dev/dri/card0
[ 4287.589] drmOpenDevice: open result is 9, (OK)
[ 4287.589] drmOpenByBusid: Searching for BusID pci:0000:03:00.0
[ 4287.589] drmOpenDevice: node name is /dev/dri/card0
[ 4287.589] drmOpenDevice: open result is 9, (OK)
[ 4287.589] drmOpenByBusid: drmOpenMinor returns 9
[ 4287.589] drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
[ 4287.589] (II) [drm] DRM interface version 1.4
[ 4287.589] (II) [drm] DRM open master succeeded.
[ 4287.589] (--) NOUVEAU(0): Chipset: "NVIDIA NV86"
[ 4287.589] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 4287.589] (==) NOUVEAU(0): RGB weight 888
[ 4287.589] (==) NOUVEAU(0): Default visual is TrueColor
[ 4287.589] (==) NOUVEAU(0): Using HW cursor
[ 4287.589] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 4287.589] (==) NOUVEAU(0): Page flipping enabled
[ 4287.732] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0
[ 4288.176] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 4288.281] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 4288.726] (II) NOUVEAU(0): EDID for output VGA-1
[ 4288.726] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 4288.726] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 4288.726] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 4288.726] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 4288.726] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976
1088 480 486 494 517 +hsync +vsync (31.0 kHz)
[ 4288.726] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 489 492 525 -hsync -vsync (31.5 kHz)
[ 4288.726] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 4288.727] (II) NOUVEAU(0): Output VGA-1 connected
[ 4288.727] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 4288.727] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 4288.727] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 4288.727] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 4288.727] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled
from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 4288.727] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 4288.727] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from
0.0 MHz), 37.9 kHz, 60.3 Hz
[ 4288.727] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 4288.727] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from
0.0 MHz), 35.2 kHz, 56.2 Hz
[ 4288.727] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 4288.727] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from
0.0 MHz), 31.0 kHz, 60.0 Hz
[ 4288.727] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976
1088 480 486 494 517 +hsync +vsync (31.0 kHz)
[ 4288.727] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from
0.0 MHz), 31.5 kHz, 59.9 Hz
[ 4288.727] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 489 492 525 -hsync -vsync (31.5 kHz)
[ 4288.727] (==) NOUVEAU(0): DPI set to (96, 96)
[ 4288.727] (II) Loading sub module "fb"
[ 4288.727] (II) LoadModule: "fb"
[ 4288.727] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4288.727] (II) Module fb: vendor="X.Org Foundation"
[ 4288.727] compiled for 1.11.3.901, module version = 1.0.0
[ 4288.727] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4288.727] (II) Loading sub module "exa"
[ 4288.727] (II) LoadModule: "exa"
[ 4288.727] (II) Loading /usr/lib/xorg/modules/libexa.**so
[ 4288.727] (II) Module exa: vendor="X.Org Foundation"
[ 4288.727] compiled for 1.11.3.901, module version = 2.5.0
[ 4288.727] ABI class: X.Org Video Driver, version 11.0
[ 4288.727] (II) Loading sub module "shadowfb"
[ 4288.727] (II) LoadModule: "shadowfb"
[ 4288.727] (II) Loading /usr/lib/xorg/modules/**libshadowfb.so
[ 4288.727] (II) Module shadowfb: vendor="X.Org Foundation"
[ 4288.727] compiled for 1.11.3.901, module version = 1.0.0
[ 4288.727] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4288.728] (--) Depth 24 pixmap format is 32 bpp
[ 4288.744] (II) NOUVEAU(0): Opened GPU channel 2
[ 4288.744] (II) NOUVEAU(0): [DRI2] Setup complete
[ 4288.744] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 4288.744] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 4288.747] (II) NOUVEAU(0): GART: 512MiB available
[ 4288.751] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[ 4288.751] (II) EXA(0): Driver allocated offscreen pixmaps
[ 4288.751] (II) EXA(0): Driver registered support for the following
operations:
[ 4288.751] (II) Solid
[ 4288.751] (II) Copy
[ 4288.751] (II) Composite (RENDER acceleration)
[ 4288.751] (II) UploadToScreen
[ 4288.751] (II) DownloadFromScreen
[ 4288.751] (==) NOUVEAU(0): Backing store disabled
[ 4288.751] (==) NOUVEAU(0): Silken mouse enabled
[ 4288.751] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9
Textured Video.
[ 4288.751] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 4288.751] (**) NOUVEAU(0): DPMS enabled
[ 4288.751] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 4288.751] (WW) NOUVEAU(0): Option "LogoPath" is not used
[ 4288.751] (WW) NOUVEAU(0): Option "TwinView" is not used
[ 4288.751] (WW) NOUVEAU(0): Option "metamodes" is not used
[ 4288.751] (--) RandR disabled
[ 4288.751] (II) Initializing built-in extension Generic Event Extension
[ 4288.751] (II) Initializing built-in extension SHAPE
[ 4288.751] (II) Initializing built-in extension MIT-SHM
[ 4288.751] (II) Initializing built-in extension XInputExtension
[ 4288.751] (II) Initializing built-in extension XTEST
[ 4288.751] (II) Initializing built-in extension BIG-REQUESTS
[ 4288.751] (II) Initializing built-in extension SYNC
[ 4288.751] (II) Initializing built-in extension XKEYBOARD
[ 4288.751] (II) Initializing built-in extension XC-MISC
[ 4288.751] (II) Initializing built-in extension SECURITY
[ 4288.751] (II) Initializing built-in extension XINERAMA
[ 4288.751] (II) Initializing built-in extension XFIXES
[ 4288.751] (II) Initializing built-in extension RENDER
[ 4288.751] (II) Initializing built-in extension RANDR
[ 4288.751] (II) Initializing built-in extension COMPOSITE
[ 4288.751] (II) Initializing built-in extension DAMAGE
[ 4288.751] (II) SELinux: Disabled on system
[ 4288.773] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4288.773] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4288.773] (II) AIGLX: enabled GLX_SGI_swap_control and
GLX_MESA_swap_control
[ 4288.773] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 4288.773] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
objects
[ 4288.774] (II) AIGLX: Loaded and initialized nouveau
[ 4288.774] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4288.775] (II) NOUVEAU(0): NVEnterVT is called.
[ 4288.782] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[ 4288.782] resize called 1024 768
[ 4288.809] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 4288.809] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 4288.809] (II) LoadModule: "evdev"
[ 4288.809] (II) Loading /usr/lib/xorg/modules/input/**evdev_drv.so
[ 4288.809] (II) Module evdev: vendor="X.Org Foundation"
[ 4288.809] compiled for 1.11.0, module version = 2.6.0
[ 4288.809] Module class: X.Org XInput Driver
[ 4288.809] ABI class: X.Org XInput driver, version 13.0
[ 4288.809] (II) Using input driver 'evdev' for 'Power Button'
[ 4288.809] (II) Loading /usr/lib/xorg/modules/input/**evdev_drv.so
[ 4288.809] (**) Power Button: always reports core events
[ 4288.809] (**) Power Button: Device: "/dev/input/event3"
[ 4288.809] (--) Power Button: Found keys
[ 4288.809] (II) Power Button: Configuring as keyboard
[ 4288.809] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:**
00/LNXPWRBN:00/input/input3/**event3"
[ 4288.809] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 4288.809] (**) Option "xkb_rules" "evdev"
[ 4288.809] (**) Option "xkb_model" "pc105"
[ 4288.810] (**) Option "xkb_layout" "fr"
[ 4288.810] (**) Option "xkb_variant" "latin9"
[ 4288.831] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 4288.831] (**) Power Button: Applying InputClass "evdev keyboard
catchall"
[ 4288.831] (II) Using input driver 'evdev' for 'Power Button'
[ 4288.831] (II) Loading /usr/lib/xorg/modules/input/**evdev_drv.so
[ 4288.831] (**) Power Button: always reports core events
[ 4288.831] (**) Power Button: Device: "/dev/input/event2"
[ 4288.831] (--) Power Button: Found keys
[ 4288.831] (II) Power Button: Configuring as keyboard
[ 4288.831] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:**
00/device:00/PNP0C0C:00/input/**input2/event2"
[ 4288.831] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 7)
[ 4288.831] (**) Option "xkb_rules" "evdev"
[ 4288.831] (**) Option "xkb_model" "pc105"
[ 4288.831] (**) Option "xkb_layout" "fr"
[ 4288.831] (**) Option "xkb_variant" "latin9"
[ 4288.832] (II) config/udev: Adding input device UVC Camera (046d:081d)
(/dev/input/event7)
[ 4288.832] (**) UVC Camera (046d:081d): Applying InputClass "evdev
keyboard catchall"
[ 4288.832] (II) Using input driver 'evdev' for 'UVC Camera (046d:081d)'
[ 4288.832] (II) Loading /usr/lib/xorg/modules/input/**evdev_drv.so
[ 4288.832] (**) UVC Camera (046d:081d): always reports core events
[ 4288.832] (**) UVC Camera (046d:081d): Device: "/dev/input/event7"
[ 4288.832] (--) UVC Camera (046d:081d): Found keys
[ 4288.832] (II) UVC Camera (046d:081d): Configuring as keyboard
[ 4288.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/**
0000:00:02.0/0000:02:00.0/**usb2/2-1/2-1:1.2/input/input7/**event7"
[ 4288.832] (II) XINPUT: Adding extended input device "UVC Camera
(046d:081d)" (type: KEYBOARD, id 8)
[ 4288.832] (**) Option "xkb_rules" "evdev"
[ 4288.832] (**) Option "xkb_model" "pc105"
[ 4288.832] (**) Option "xkb_layout" "fr"
[ 4288.832] (**) Option "xkb_variant" "latin9"
[ 4288.832] (II) config/udev: Adding input device NOVATEK USB Keyboard
(/dev/input/event0)
[ 4288.832] (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard
catchall"
[ 4288.832] (II) Using input driver 'evdev' for 'NOVATEK USB Keyboard'
[ 4288.832] (II) Loading /usr/lib/xorg/modules/input/**evdev_drv.so
[ 4288.832] (**) NOVATEK USB Keyboard: always reports core events
[ 4288.832] (**) NOVATEK USB Keyboard: Device: "/dev/input/event0"
[ 4288.832] (--) NOVATEK USB Keyboard: Found keys
[ 4288.832] (II) NOVATEK USB Keyboard: Configuring as keyboard
[ 4288.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/**
0000:00:1a.0/usb5/5-1/5-1:1.0/**input/input10/event0"
[ 4288.832] (II) XINPUT: Adding extended input device "NOVATEK USB
Keyboard" (type: KEYBOARD, id 9)
[ 4288.832] (**) Option "xkb_rules" "evdev"
[ 4288.832] (**) Option "xkb_model" "pc105"
[ 4288.832] (**) Option "xkb_layout" "fr"
[ 4288.832] (**) Option "xkb_variant" "latin9"
[ 4288.833] (II) config/udev: Adding input device NOVATEK USB Keyboard
(/dev/input/event1)
[ 4288.833] (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard
catchall"
[ 4288.833] (II) Using input driver 'evdev' for 'NOVATEK USB Keyboard'
[ 4288.833] (II) Loading /usr/lib/xorg/modules/input/**evdev_drv.so
[ 4288.833] (**) NOVATEK USB Keyboard: always reports core events
[ 4288.833] (**) NOVATEK USB Keyboard: Device: "/dev/input/event1"
[ 4288.833] (--) NOVATEK USB Keyboard: Found 20 mouse buttons
[ 4288.833] (--) NOVATEK USB Keyboard: Found keys
[ 4288.833] (II) NOVATEK USB Keyboard: Configuring as mouse
[ 4288.833] (II) NOVATEK USB Keyboard: Configuring as keyboard
[ 4288.833] (**) NOVATEK USB Keyboard: YAxisMapping: buttons 4 and 5
[ 4288.833] (**) NOVATEK USB Keyboard: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4288.833] (**) Option "config_info" "udev:/sys/devices/pci0000:00/**
0000:00:1a.0/usb5/5-1/5-1:1.1/**input/input11/event1"
[ 4288.833] (II) XINPUT: Adding extended input device "NOVATEK USB
Keyboard" (type: KEYBOARD, id 10)
[ 4288.833] (**) Option "xkb_rules" "evdev"
[ 4288.833] (**) Option "xkb_model" "pc105"
[ 4288.833] (**) Option "xkb_layout" "fr"
[ 4288.833] (**) Option "xkb_variant" "latin9"
[ 4288.834] (II) config/udev: Adding input device USB Optical Mouse
(/dev/input/event5)
[ 4288.834] (**) USB Optical Mouse: Applying InputClass "evdev pointer
catchall"
[ 4288.834] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 4288.834] (II) Loading /usr/lib/xorg/modules/input/**evdev_drv.so
[ 4288.834] (**) USB Optical Mouse: always reports core events
[ 4288.834] (**) USB Optical Mouse: Device: "/dev/input/event5"
[ 4288.834] (--) USB Optical Mouse: Found 3 mouse buttons
[ 4288.834] (--) USB Optical Mouse: Found scroll wheel(s)
[ 4288.834] (--) USB Optical Mouse: Found relative axes
[ 4288.834] (--) USB Optical Mouse: Found x and y relative axes
[ 4288.834] (II) USB Optical Mouse: Configuring as mouse
[ 4288.834] (II) USB Optical Mouse: Adding scrollwheel support
[ 4288.834] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 4288.834] (**) USB Optical Mouse: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 4288.834] (**) Option "config_info" "udev:/sys/devices/pci0000:00/**
0000:00:1a.1/usb6/6-2/6-2:1.0/**input/input12/event5"
[ 4288.834] (II) XINPUT: Adding extended input device "USB Optical Mouse"
(type: MOUSE, id 11)
[ 4288.834] (II) USB Optical Mouse: initialized for relative axes.
[ 4288.834] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 4288.834] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 4288.834] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 4288.834] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 4288.834] (II) config/udev: Adding input device USB Optical Mouse
(/dev/input/mouse0)
[ 4288.834] (II) No input driver/identifier specified (ignoring)
[ 4288.835] (II) config/udev: Adding input device IR-receiver inside an
USB DVB receiver (/dev/input/event8)
[ 4288.835] (**) IR-receiver inside an USB DVB receiver: Applying
InputClass "evdev keyboard catchall"
[ 4288.835] (II) Using input driver 'evdev' for 'IR-receiver inside an USB
DVB receiver'
[ 4288.835] (II) Loading /usr/lib/xorg/modules/input/**evdev_drv.so
[ 4288.835] (**) IR-receiver inside an USB DVB receiver: always reports
core events
[ 4288.835] (**) IR-receiver inside an USB DVB receiver: Device:
"/dev/input/event8"
[ 4288.835] (--) IR-receiver inside an USB DVB receiver: Found keys
[ 4288.835] (II) IR-receiver inside an USB DVB receiver: Configuring as
keyboard
[ 4288.835] (**) Option "config_info" "udev:/sys/devices/pci0000:00/**
0000:00:1a.7/usb1/1-6/input/**input8/event8"
[ 4288.835] (II) XINPUT: Adding extended input device "IR-receiver inside
an USB DVB receiver" (type: KEYBOARD, id 12)
[ 4288.835] (**) Option "xkb_rules" "evdev"
[ 4288.835] (**) Option "xkb_model" "pc105"
[ 4288.835] (**) Option "xkb_layout" "fr"
[ 4288.835] (**) Option "xkb_variant" "latin9"
[ 4288.835] (II) config/udev: Adding input device HDA Intel Headphone
(/dev/input/event9)
[ 4288.835] (II) No input driver/identifier specified (ignoring)
[ 4288.836] (II) config/udev: Adding input device PC Speaker
(/dev/input/event4)
[ 4288.836] (II) No input driver/identifier specified (ignoring)
[ 4499.904] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4499.904] (II) NOUVEAU(0): NVLeaveVT is called.
[ 4517.696] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4517.696] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 4517.696] (II) NOUVEAU(0): NVEnterVT is called.
[ 4547.300] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4547.300] (II) NOUVEAU(0): NVLeaveVT is called.
[ 4579.929] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4579.929] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 4579.929] (II) NOUVEAU(0): NVEnterVT is called.*
==

Dans ce fichier, ce qui me suprend ce sont ces lignes:

*[ 4287.732] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor=

0
[ 4288.176] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 4288.281] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 4288.726] (II) NOUVEAU(0): EDID for output VGA-1
[ 4288.726] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 4288.726] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 4288.726] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 4288.726] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 4288.726] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976
1088 480 486 494 517 +hsync +vsync (31.0 kHz)
[ 4288.726] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 489 492 525 -hsync -vsync (31.5 kHz)
[ 4288.726] (II) NOUVEAU(0): Output DVI-I-1 disconnected
[ 4288.727] (II) NOUVEAU(0): Output VGA-1 connected
[ 4288.727] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[ 4288.727] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[ 4288.727] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 4288.727] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[ 4288.727] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled
from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 4288.727] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 4288.727] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from
0.0 MHz), 37.9 kHz, 60.3 Hz
[ 4288.727] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 4288.727] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from
0.0 MHz), 35.2 kHz, 56.2 Hz
[ 4288.727] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896
1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 4288.727] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from
0.0 MHz), 31.0 kHz, 60.0 Hz
[ 4288.727] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976
1088 480 486 494 517 +hsync +vsync (31.0 kHz)
[ 4288.727] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from
0.0 MHz), 31.5 kHz, 59.9 Hz
[ 4288.727] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 489 492 525 -hsync -vsync (31.5 kHz)*

J'ai fait 1000 recherches sur le web et je ne comprends rien à rien à l=
a
config de ce fichier. Je ne comprends pas pourquoi le système est incapab=
le
lors de l'install de me fournir une conf de l'écran qui soit correcte !
Alors que cela a été le cas par le passé avec la même carte graphiq=
ue
(Geforce 8500GT).

Merci d'avance pour votre aide,

Cordialement,

--14dae9341053b1857004ba9603b4
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Bonjour,<br><br>Je galère comme un dingue avec la configuration de la r=
ésolution de mon écran IIYAMA B2403WS.<br>Cet écran à  toujours t=
rès bien fonctionné en 1920x1200 sous Debian jusqu&#39;à ce que je so=
uhaite utiliser le driver libre «nouveau» à la place des drivers prop=
rio.<br>


<br>Si je souhaite utiliser «nouveau» c&#39;est parce que j&#39;ai un g=
ros problème de plantages intempestifs de mon PC depuis plusieurs mois. J=
&#39;ai fait plusieurs tests matériels et la dernière chose que je souh=
aite tester c&#39;est de virer le driver proprio au profit de «nouveau»=
pour voir si cela a une incidence sur mon problème.<br>


<br>Je viens de réinstaller une Debian Wheezy from scratch. C&#39;est bie=
n le driver «nouveau» qui est utilisé mais impossible de dépasser 1=
024x768 en résolution.<br><br>Par ailleurs, impossible de créer un fich=
ier xorg.conf. La commande Xorg -configure crée un fichier xorg.conf.new =
que voici:<br>

<br>=<br><i>Section &quot;Se=
rverLayout&quot;<br>    Identifier     &quot;X.org Configured=
&quot;<br>    Screen      0  &quot;Screen0&quot; 0 0<br>=
    Screen      1  &quot;Screen1&quot; RightOf &quot;Scre=
en0&quot;<br>

    Screen      2  &quot;Screen2&quot; RightOf &quot;Scre=
en1&quot;<br>    InputDevice    &quot;Mouse0&quot; &quot;CorePo=
inter&quot;<br>    InputDevice    &quot;Keyboard0&quot; &quot;C=
oreKeyboard&quot;<br>EndSection<br><br>

Section &quot;Files&quot;<br>    ModulePath   &quot;/usr/lib/xorg=
/modules&quot;<br>    FontPath     &quot;/usr/share/fonts/X11=
/misc&quot;<br>    FontPath     &quot;/usr/share/fonts/X11/</=
i><i>cyrillic&quot;<br>    FontPath     &quot;/usr/share/font=
s/X11/100dpi/:</i><i>unscaled&quot;<br>

    FontPath     &quot;/usr/share/fonts/X11/75dpi/:</i><i>uns=
caled&quot;<br>    FontPath     &quot;/usr/share/fonts/X11/Ty=
pe1&quot;<br>    FontPath     &quot;/usr/share/fonts/X11/100d=
pi&quot;<br>    FontPath     &quot;/usr/share/fonts/X11/75dpi=
&quot;<br>

    FontPath     &quot;/var/lib/defoma/x-ttcidfont-</i><i>con=
f.d/dirs/TrueType&quot;<br>    FontPath     &quot;built-ins&q=
uot;<br>EndSection<br><br>Section &quot;Module&quot;<br>    Load  &=
quot;dri&quot;<br>    Load  &quot;dri2&quot;<br>

    Load  &quot;extmod&quot;<br>    Load  &quot;record&quot=
;<br>    Load  &quot;dbe&quot;<br>    Load  &quot;glx&quot;=
<br>EndSection<br><br>Section &quot;InputDevice&quot;<br>    Identifi=
er  &quot;Keyboard0&quot;<br>    Driver      &quot;kbd&qu=
ot;<br>

EndSection<br><br>Section &quot;InputDevice&quot;<br>    Identifier=
  &quot;Mouse0&quot;<br>    Driver      &quot;mouse&quot;=
<br>    Option        &quot;Protocol&quot; &quot;auto&quo=
t;<br>    Option        &quot;Device&quot; &quot;/dev/inp=
ut/mice&quot;<br>

    Option        &quot;ZAxisMapping&quot; &quot;4 5 6 7&=
quot;<br>EndSection<br><br>Section &quot;Monitor&quot;<br>    Identif=
ier   &quot;Monitor0&quot;<br>    VendorName   &quot;Monitor =
Vendor&quot;<br>    ModelName    &quot;Monitor Model&quot;<br>

EndSection<br><br>Section &quot;Monitor&quot;<br>    Identifier  =
&quot;Monitor1&quot;<br>    VendorName   &quot;Monitor Vendor&qu=
ot;<br>    ModelName    &quot;Monitor Model&quot;<br>EndSection=
<br><br>Section &quot;Monitor&quot;<br>

    Identifier   &quot;Monitor2&quot;<br>    VendorName =
  &quot;Monitor Vendor&quot;<br>    ModelName    &quot;Monito=
r Model&quot;<br>EndSection<br><br>Section &quot;Device&quot;<br>   =
     ### Available Driver options are:-<br>

        ### Values: &lt;i&gt;: integer, &lt;f&gt;: float, &lt=
;bool&gt;: &quot;True&quot;/&quot;False&quot;,<br>        ###=
&lt;string&gt;: &quot;String&quot;, &lt;freq&gt;: &quot;&lt;f&gt; Hz/kHz/M=
Hz&quot;,<br>        ### &lt;percent&gt;: &quot;&lt;f&gt;%&qu=
ot;<br>

        ### [arg]: arg optional<br>        #Opt=
ion     &quot;SWcursor&quot;             =
  # [&lt;bool&gt;]<br>        #Option     &quot;HWc=
ursor&quot;               # [&lt;bool&gt;]<br> =
       #Option     &quot;NoAccel&quot;     =
           # [&lt;bool&gt;]<br>

        #Option     &quot;ShadowFB&quot;    =
           # [&lt;bool&gt;]<br>        #Opt=
ion     &quot;VideoKey&quot;             =
  # &lt;i&gt;<br>        #Option     &quot;WrappedF=
B&quot;              # [&lt;bool&gt;]<br>
        #Option     &quot;GLXVBlank&quot;    =
          # [&lt;bool&gt;]<br>
        #Option     &quot;ZaphodHeads&quot;   =
         # &lt;str&gt;<br>        #Option  =
   &quot;PageFlip&quot;               # [&lt;=
bool&gt;]<br>    Identifier  &quot;Card0&quot;<br>    Driver=
      &quot;nouveau&quot;<br>

    BusID       &quot;PCI:3:0:0&quot;<br>EndSection<br><b=
r>Section &quot;Device&quot;<br>        ### Available Driver =
options are:-<br>        ### Values: &lt;i&gt;: integer, &lt;=
f&gt;: float, &lt;bool&gt;: &quot;True&quot;/&quot;False&quot;,<br>

        ### &lt;string&gt;: &quot;String&quot;, &lt;freq&gt;:=
&quot;&lt;f&gt; Hz/kHz/MHz&quot;,<br>        ### &lt;percent=
&gt;: &quot;&lt;f&gt;%&quot;<br>        ### [arg]: arg option=
al<br>        #Option     &quot;ShadowFB&quot;  =
             # [&lt;bool&gt;]<br>

        #Option     &quot;Rotate&quot;     =
            # &lt;str&gt;<br>        #Opt=
ion     &quot;fbdev&quot;              =
    # &lt;str&gt;<br>        #Option     &quot;=
debug&quot;                  # [&lt;bool&gt=
;]<br>    Identifier  &quot;Card1&quot;<br>

    Driver      &quot;fbdev&quot;<br>    BusID  =
     &quot;PCI:3:0:0&quot;<br>EndSection<br><br>Section &quot;Devic=
e&quot;<br>        ### Available Driver options are:-<br> =
       ### Values: &lt;i&gt;: integer, &lt;f&gt;: float, &lt;bo=
ol&gt;: &quot;True&quot;/&quot;False&quot;,<br>

        ### &lt;string&gt;: &quot;String&quot;, &lt;freq&gt;:=
&quot;&lt;f&gt; Hz/kHz/MHz&quot;,<br>        ### &lt;percent=
&gt;: &quot;&lt;f&gt;%&quot;<br>        ### [arg]: arg option=
al<br>        #Option     &quot;ShadowFB&quot;  =
             # [&lt;bool&gt;]<br>

        #Option     &quot;DefaultRefresh&quot;  =
       # [&lt;bool&gt;]<br>        #Option   =
  &quot;ModeSetClearScreen&quot;     # [&lt;bool&gt;]<br>    =
Identifier  &quot;Card2&quot;<br>    Driver      &quot;ve=
sa&quot;<br>

    BusID       &quot;PCI:3:0:0&quot;<br>EndSection<br><b=
r>Section &quot;Screen&quot;<br>    Identifier &quot;Screen0&quot;<br=
>    Device     &quot;Card0&quot;<br>    Monitor  =
  &quot;Monitor0&quot;<br>    SubSection &quot;Display&quot;<br>

        Viewport   0 0<br>        Depth  =
   1<br>    EndSubSection<br>    SubSection &quot;Display&q=
uot;<br>        Viewport   0 0<br>        Depth=
     4<br>    EndSubSection<br>    SubSection &quot;Dis=
play&quot;<br>        Viewport   0 0<br>

        Depth     8<br>    EndSubSection<br> =
   SubSection &quot;Display&quot;<br>        Viewport  =
0 0<br>        Depth     15<br>    EndSubSection=
<br>    SubSection &quot;Display&quot;<br>        Viewpor=
t   0 0<br>        Depth     16<br>

    EndSubSection<br>    SubSection &quot;Display&quot;<br> =
       Viewport   0 0<br>        Depth   =
  24<br>    EndSubSection<br>EndSection<br><br>Section &quot;Screen=
&quot;<br>    Identifier &quot;Screen1&quot;<br>    Device =
    &quot;Card1&quot;<br>

    Monitor    &quot;Monitor1&quot;<br>    SubSection &qu=
ot;Display&quot;<br>        Viewport   0 0<br>     =
   Depth     1<br>    EndSubSection<br>    SubSecti=
on &quot;Display&quot;<br>        Viewport   0 0<br>  =
      Depth     4<br>

    EndSubSection<br>    SubSection &quot;Display&quot;<br> =
       Viewport   0 0<br>        Depth   =
  8<br>    EndSubSection<br>    SubSection &quot;Display&quot=
;<br>        Viewport   0 0<br>        Depth =
    15<br>    EndSubSection<br>

    SubSection &quot;Display&quot;<br>        Viewport =
  0 0<br>        Depth     16<br>    EndSubSect=
ion<br>    SubSection &quot;Display&quot;<br>        View=
port   0 0<br>        Depth     24<br>    End=
SubSection<br>EndSection<br>
<br>Section &quot;Screen&quot;</i>
<i><br>    Identifier &quot;Screen2&quot;<br>    Device  =
   &quot;Card2&quot;<br>    Monitor    &quot;Monitor2&quot;=
<br>    SubSection &quot;Display&quot;<br>        Viewpor=
t   0 0<br>        Depth     1<br>
    EndSubSection<br>    SubSection &quot;Display&quot;<br> =
       Viewport   0 0<br>        Depth   =
  4<br>    EndSubSection<br>    SubSection &quot;Display&quot=
;<br>        Viewport   0 0<br>        Depth =
    8<br>    EndSubSection<br>

    SubSection &quot;Display&quot;<br>        Viewport =
  0 0<br>        Depth     15<br>    EndSubSect=
ion<br>    SubSection &quot;Display&quot;<br>        View=
port   0 0<br>        Depth     16<br>    End=
SubSection<br>    SubSection &quot;Display&quot;<br>

        Viewport   0 0<br>        Depth  =
   24<br>    EndSubSection<br>EndSection</i><br>
<br><br>Lorsque je me=
connecte, voici le contenu de /var/log/Xorg.0.log<br><br>
<br><i>[  4287.580]=
<br>

X.Org X Server 1.11.3.901 (1.11.4 RC 1)<br>Release Date: 2012-01-06<br>[ =
4287.580] X Protocol Version 11, Revision 0<br>[  4287.580] Build Operat=
ing System: Linux 3.2.0-rc6+ x86_64 Debian<br>[  4287.580] Current Operat=
ing System: Linux esperance 3.2.0-1-amd64 #1 SMP Fri Feb 17 05:17:36 UTC 20=
12 x86_64<br>

[  4287.580] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.</i><i>0=
-1-amd64 root=UUID=5d11254e-e129-4d91-</i><i>b93c-37c7517a55f6 ro quiet=
<br>[  4287.580] Build Date: 19 January 2012  09:53:39AM<br>[  4287.5=
80] xorg-server 2:1.11.3.901-2 (Cyril Brulebois &lt;<a href="mailto:kibi@=
debian.org" target="_blank">kibi@debian.org</a>&gt;) <br>

[  4287.580] Current version of pixman: 0.24.4<br>[  4287.580]   =
  Before reporting problems, check <a href="http://wiki.x.org" target=
="_blank">http://wiki.x.org</a><br>    to make sure that you have t=
he latest version.<br>
[  4287.580] Markers: (--) probed, (**) from config file, (==) defaul=
t setting,<br>
    (++) from command line, (!!) notice, (II) informational,<br> =
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.<br>[=
  4287.580] (==) Log file: &quot;/var/log/Xorg.0.log&quot;, Time: Tue=
Mar  6 17:38:47 2012<br>

[  4287.581] (==) Using config file: &quot;/etc/X11/xorg.conf&quot;<b=
r>[  4287.581] (==) Using system config directory &quot;/usr/share/X1=
1/xorg.conf.d&quot;<br>[  4287.581] (==) ServerLayout &quot;Layout0&q=
uot;<br>[  4287.581] (**) |--&gt;Screen &quot;Screen0&quot; (0)<br>

[  4287.581] (**) |   |--&gt;Monitor &quot;Monitor0&quot;<br>[  428=
7.581] (**) |   |--&gt;Device &quot;Device0&quot;<br>[  4287.581] (**=
) |--&gt;Input Device &quot;Generic Keyboard&quot;<br>[  4287.581] (**) |=
--&gt;Input Device &quot;Configured Mouse&quot;<br>

[  4287.581] (**) Option &quot;Xinerama&quot; &quot;0&quot;<br>[  4287.=
581] (==) Automatically adding devices<br>[  4287.581] (==) Autom=
atically enabling devices<br>[  4287.581] (WW) The directory &quot;/usr/s=
hare/fonts/X11/</i><i>cyrillic&quot; does not exist.<br>

[  4287.581]     Entry deleted from font path.<br>[  4287.581] (W=
W) The directory &quot;/var/lib/defoma/x-ttcidfont-</i><i>conf.d/dirs/TrueT=
ype&quot; does not exist.<br>[  4287.581]     Entry deleted from fo=
nt path.<br>[  4287.581] (==) FontPath set to:<br>

    /usr/share/fonts/X11/misc,<br>    /usr/share/fonts/X11/100d=
pi/:</i><i>unscaled,<br>    /usr/share/fonts/X11/75dpi/:</i><i>unscal=
ed,<br>    /usr/share/fonts/X11/Type1,<br>    /usr/share/fonts/=
X11/100dpi,<br>    /usr/share/fonts/X11/75dpi,<br>

    built-ins<br>[  4287.581] (==) ModulePath set to &quot;/usr=
/lib/xorg/modules&quot;<br>[  4287.581] (WW) Hotplugging is on, devices u=
sing drivers &#39;kbd&#39;, &#39;mouse&#39; or &#39;vmmouse&#39; will be di=
sabled.<br>

[  4287.581] (WW) Disabling Generic Keyboard<br>[  4287.581] (WW) Disab=
ling Configured Mouse<br>[  4287.581] (II) Loader magic: 0x7f3d14715ae0<b=
r>[  4287.581] (II) Module ABI versions:<br>[  4287.581]     X.Or=
g ANSI C Emulation: 0.4<br>

[  4287.581]     X.Org Video Driver: 11.0<br>[  4287.581]   =
  X.Org XInput driver : 13.0<br>[  4287.581]     X.Org Server Ext=
ension : 6.0<br>[  4287.583] (--) PCI:*(0:3:0:0) 10de:0421:1043:8245 rev =
161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, =
I/O @ 0x0000cf00/128, BIOS @ 0x????????/131072<br>

[  4287.583] (II) Open ACPI successful (/var/run/acpid.socket)<br>[  42=
87.583] (II) &quot;extmod&quot; will be loaded. This was enabled by default=
and also specified in the config file.<br>[  4287.583] (II) &quot;dbe&qu=
ot; will be loaded. This was enabled by default and also specified in the c=
onfig file.<br>

[  4287.583] (II) &quot;glx&quot; will be loaded. This was enabled by def=
ault and also specified in the config file.<br>[  4287.583] (II) &quot;re=
cord&quot; will be loaded. This was enabled by default and also specified i=
n the config file.<br>

[  4287.583] (II) &quot;dri&quot; will be loaded by default.<br>[  4287=
.583] (II) &quot;dri2&quot; will be loaded by default.<br>[  4287.583] (I=
I) LoadModule: &quot;xtrap&quot;<br>[  4287.583] (WW) Warning, couldn&#39=
;t open module xtrap<br>

[  4287.583] (II) UnloadModule: &quot;xtrap&quot;<br>[  4287.583] (II) =
Unloading xtrap<br>[  4287.583] (EE) Failed to load module &quot;xtrap&qu=
ot; (module does not exist, 0)<br>[  4287.583] (II) LoadModule: &quot;ext=
mod&quot;<br>

[  4287.584] (II) Loading /usr/lib/xorg/modules/</i><i>extensions/libextm=
Vidéos High-Tech et Jeu Vidéo
Téléchargements
Vos réponses
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
Bernard Schoenacker
Le #24300081
Le Tue, 6 Mar 2012 18:02:56 +0100,
Luxpopuli Open source
Bonjour,

Je galère comme un dingue avec la configuration de la résolution de
mon écran IIYAMA B2403WS.
Cet écran à toujours très bien fonctionné en 1920x1200 sous Debian
jusqu'à ce que je souhaite utiliser le driver libre «nouveau» à la
place des drivers proprio.

Si je souhaite utiliser «nouveau» c'est parce que j'ai un gros
problème de plantages intempestifs de mon PC depuis plusieurs mois.
J'ai fait plusieurs tests matériels et la dernière chose que je
souhaite tester c'est de virer le driver proprio au profit de
«nouveau» pour voir si cela a une incidence sur mon problème.

Je viens de réinstaller une Debian Wheezy from scratch. C'est bien le
driver «nouveau» qui est utilisé mais impossible de dépasser 1024x768
en résolution.

Par ailleurs, impossible de créer un fichier xorg.conf. La commande
Xorg -configure crée un fichier xorg.conf.new que voici:


===8< couic 8< ==
bonjour,

serait il possible de créer une entrée à l'aide de xrandr ?

exemple d'application :


xrandr --newmode "1600x1200_60.00" 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync
xrandr --addmode LVDS1 1600x1200_60.00
xrandr --addmode VGA-0 1600x1200_60.00
xrandr --output VGA-0 --mode 1600x1200_60.00


remarque:

il existe un fil de discussion traitant du sujet


slt
bernard

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Mourad Jaber
Le #24300131
Le 06/03/2012 18:02, Luxpopuli Open source a écrit :
Bonjour,


Bonjour,

Je galère comme un dingue avec la configuration de la résolution de mon écran IIYAMA
B2403WS.
Cet écran à toujours très bien fonctionné en 1920x1200 sous Debian jusqu'à ce que je
souhaite utiliser le driver libre «nouveau» à la place des drivers proprio.

Si je souhaite utiliser «nouveau» c'est parce que j'ai un gros problème de plantages
intempestifs de mon PC depuis plusieurs mois. J'ai fait plusieurs tests matériels et la
dernière chose que je souhaite tester c'est de virer le driver proprio au profit de
«nouveau» pour voir si cela a une incidence sur mon problème.

Je viens de réinstaller une Debian Wheezy from scratch. C'est bien le driver «nouveau»
qui est utilisé mais impossible de dépasser 1024x768 en résolution.



Avec un xorg.conf inexistant, ça marche (j'ai le même écran et une carte nvidia), j'ai
toute les résolutions possible !

Par contre, il semble que tu as 3 écrans si je comprends bien ton xorg.conf c'est
peut-être la différence de taille...

Personnellement, je suis revenu au driver proprio, trop de bugs d'affichage, de
dis-fonctionnement divers et varié (video, affichage de certains programmes)...

J'ai fait 1000 recherches sur le web et je ne comprends rien à rien à la config de ce
fichier. Je ne comprends pas pourquoi le système est incapable lors de l'install de me
fournir une conf de l'écran qui soit correcte ! Alors que cela a été le cas par le passé
avec la même carte graphique (Geforce 8500GT).

Merci d'avance pour votre aide,

Cordialement,


++

Mourad

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Bzzz
Le #24300591
On Tue, 6 Mar 2012 18:02:56 +0100
Luxpopuli Open source
driver «nouveau» qui est utilisé mais impossible de dà ©passer 1024x768 en
résolution.




Zarb: il considère que tu as 3 têtes graphiques!
*Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection



La section font est assez inutile: installe plutôt xfs.
Section "Files"
ModulePath "/usr/lib/xorg/modules"


…

Celle-là est obsolète; le drv se débrouille comme un grand.
Section "Module"
Load "dri"


…

kdb est obsolescent (V. evdev)
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection



etc.

Xorg a fait énormément de progrès ces dernières annà ©es et certaines
options peuvent perturber ses auto-détections - ie: sur LCD+radeon je
reste au noir si je précise les fréquences vert/hor du monitor et /ou
je laisse une section Screen; reste à tester.

Il se peut aussi que nouveau nécessite un switch spécifique à   ta
carte (+rare)

Essaye avec qq chose comme suit:

########################################################### SERVERFLAGS

Section "ServerFlags"
# Auth to leave by CTRL-ALT-BACKSPACE
Option "DontZap" "false"
EndSection

########################################################### SERVERLAYOUT

Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

########################################################### KEYBOARD

Section "InputDevice"
Identifier "Keyboard0"
Driver "evdev"
Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
Option "XkbModel" "pc104"
Option "XkbLayout" "fr"
# COMPOSE (for some diacritics) = LEFT_W$
Option "XkbOptions" "compose:lwin"
# Option "XkbVariant" "latin9"
Option "XkbVariant" "oss"
EndSection

########################################################### MOUSE

Section "InputDevice"
Identifier "Mouse0"
Driver "evdev"
Option "Protocol" "auto"
# Chge resolution
Option "Resolution" "3500"
EndSection

########################################################### MONITORS

Section "Monitor"
Identifier "IIYAMA24"
# ANALOGIC
HorizSync 24.0 - 80.0
VertRefresh 55 - 75
# DIGITAL
# HorizSync 30.0 - 80.0
# VertRefresh 55 - 75
Option "DPMS" "TRUE"
Option "RandR" "TRUE"
EndSection

########################################################### GC

Section "Device"
Identifier "NVIDIA GeForce3-TI200"
Driver "nouveau"
Option "backingstore" "True"
EndSection

########################################################### SCREEN

Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce3-TI200"
Monitor "IIYAMA24"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1080"
EndSubSection
EndSection

########################################################### EXTENSIONS

Section "DRI"
Mode 0666
EndSection

########################################################### EOF

--
bi, n:
When *everybody* thinks you're a pervert.

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Luxpopuli Open source
Le #24301661
--90e6ba6e8ef23a6ccb04baa5b3bf
Content-Type: text/plain; charset=windows-1252
Content-Transfer-Encoding: quoted-printable

Merci bien pour vos contributions.

Mon problème de plantage intempestif ne vient pas du driver proprio car
même avec «nouveau» mon PC plante.
Il doit donc y avoir un problème hardware de carte mère.

Je suis donc revenu au driver proprio et j'attendrai de pouvoir changer la
carte mère.

Cordialement,

Le 6 mars 2012 18:36, Bzzz
On Tue, 6 Mar 2012 18:02:56 +0100
Luxpopuli Open source
> driver «nouveau» qui est utilisé mais impossible de dépasser 10 24x768 en
> résolution.
>

Zarb: il considère que tu as 3 têtes graphiques!
> *Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> Screen 1 "Screen1" RightOf "Screen0"
> Screen 2 "Screen2" RightOf "Screen1"
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection

La section font est assez inutile: installe plutôt xfs.
> Section "Files"
> ModulePath "/usr/lib/xorg/modules"
…

Celle-là est obsolète; le drv se débrouille comme un grand.
> Section "Module"
> Load "dri"
…

kdb est obsolescent (V. evdev)
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection

etc.

Xorg a fait énormément de progrès ces dernières années et certa ines
options peuvent perturber ses auto-détections - ie: sur LCD+radeon je
reste au noir si je précise les fréquences vert/hor du monitor et/ou
je laisse une section Screen; reste à tester.

Il se peut aussi que nouveau nécessite un switch spécifique à ta
carte (+rare)

Essaye avec qq chose comme suit:

########################################################### SERVERFLAGS

Section "ServerFlags"
# Auth to leave by CTRL-ALT-BACKSPACE
Option "DontZap" "false"
EndSection

########################################################### SERVERLAYOU T

Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

########################################################### KEYBOARD

Section "InputDevice"
Identifier "Keyboard0"
Driver "evdev"
Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
Option "XkbModel" "pc104"
Option "XkbLayout" "fr"
# COMPOSE (for some diacritics) = LEFT_W$
Option "XkbOptions" "compose:lwin"
# Option "XkbVariant" "latin9"
Option "XkbVariant" "oss"
EndSection

########################################################### MOUSE

Section "InputDevice"
Identifier "Mouse0"
Driver "evdev"
Option "Protocol" "auto"
# Chge resolution
Option "Resolution" "3500"
EndSection

########################################################### MONITORS

Section "Monitor"
Identifier "IIYAMA24"
# ANALOGIC
HorizSync 24.0 - 80.0
VertRefresh 55 - 75
# DIGITAL
# HorizSync 30.0 - 80.0
# VertRefresh 55 - 75
Option "DPMS" "TRUE"
Option "RandR" "TRUE"
EndSection

########################################################### GC

Section "Device"
Identifier "NVIDIA GeForce3-TI200"
Driver "nouveau"
Option "backingstore" "True"
EndSection

########################################################### SCREEN

Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce3-TI200"
Monitor "IIYAMA24"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1080"
EndSubSection
EndSection

########################################################### EXTENSIONS

Section "DRI"
Mode 0666
EndSection

########################################################### EOF

--
bi, n:
When *everybody* thinks you're a pervert.

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/





--90e6ba6e8ef23a6ccb04baa5b3bf
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: quoted-printable

Merci bien pour vos contributions. <div class="im">On Tue, 6 Mar 2012 18:02:56 +0100<br>
Luxpopuli Open source &lt; <br>
&gt; driver «nouveau» qui est utilisé mais impossible de dépasser 1 024x768 en<br>
&gt; résolution.<br>
&gt;<br>
<br>
</div>Zarb: il considère que tu as 3 têtes graphiques!<br>
&gt; *Section &quot;ServerLayout&quot;<br>
&gt;     Screen      0  &quot;Screen0&quot; 0 0<br>
&gt;     Screen      1  &quot;Screen1&quot; RightOf &quot;Scree n0&quot;<br>
&gt;     Screen      2  &quot;Screen2&quot; RightOf &quot;Scree n1&quot;<br>
&gt;     InputDevice    &quot;Mouse0&quot; &quot;CorePointer&quot;< br>
&gt;     InputDevice    &quot;Keyboard0&quot; &quot;CoreKeyboard&qu ot;<br>
&gt; EndSection<br>
<br>
&gt; Section &quot;Files&quot;<br>
&gt;     ModulePath   &quot;/usr/lib/xorg/modules&quot;<br>
…<br>
<br>
Celle-là est obsolète; le drv se débrouille comme un grand.<br>
&gt; Section &quot;Module&quot;<br>
&gt;     Load  &quot;dri&quot;<br>
…<br>
<br>
kdb est obsolescent (V. evdev)<br>
<div class="im">&gt; Section &quot;InputDevice&quot;<br>
&gt;     Identifier  &quot;Keyboard0&quot;<br>
&gt;     Driver      &quot;kbd&quot;<br>
&gt; EndSection<br>
<br>
<br>
Xorg a fait énormément de progrès ces dernières années et certain es<br>
options peuvent perturber ses auto-détections - ie: sur LCD+radeon je<br>
reste au noir si je précise les fréquences vert/hor du monitor et/ou<br >
je laisse une section Screen; reste à tester.<br>
<br>
Il se peut aussi que nouveau nécessite un switch spécifique à ta<br>
carte (+rare)<br>
<br>
Essaye avec qq chose comme suit:<br>
<br>
###########################################################   SERVERFLAGS <br>
<br>
Section &quot;ServerFlags&quot;<br>
   # Auth to leave by CTRL-ALT-BACKSPACE<br>
   Option          &quot;DontZap&quot;           & quot;false&quot;<br>
EndSection<br>
<br>
###########################################################   SERVERLAYOU T<br>
<br>
Section &quot;ServerLayout&quot;<br>
   Identifier     &quot;Simple Layout&quot;<br>
   Screen         &quot;Screen0&quot;            0 0<br>
<div class="im">    InputDevice    &quot;Mouse0&quot;             &quot;CorePointer&quot;<br>
   InputDevice    &quot;Keyboard0&quot;          &quot;C oreKeyboard&quot;<br>
EndSection<br>
<br>
</div>###########################################################   KEYBO ARD<br>
<br>
Section &quot;InputDevice&quot;<br>
   Identifier     &quot;Keyboard0&quot;<br>
   Driver         &quot;evdev&quot;<br>
   Option         &quot;XkbRules&quot;           &qu ot;xorg&quot;<br>
#    Option         &quot;XkbModel&quot;           &q uot;pc105&quot;<br>
   Option         &quot;XkbModel&quot;           &qu ot;pc104&quot;<br>
   Option         &quot;XkbLayout&quot;          &qu ot;fr&quot;<br>
   # COMPOSE (for some diacritics) = LEFT_W$<br>
  Option         &quot;XkbOptions&quot;          &quot ;compose:lwin&quot;<br>
#   Option         &quot;XkbVariant&quot;          &quo t;latin9&quot;<br>
  Option         &quot;XkbVariant&quot;          &quot ;oss&quot;<br>
EndSection<br>
<br>
###########################################################   MOUSE<br>
<br>
Section &quot;InputDevice&quot;<br>
   Identifier    &quot;Mouse0&quot;<br>
   Driver        &quot;evdev&quot;<br>
   Option        &quot;Protocol&quot;            & quot;auto&quot;<br>
   # Chge resolution<br>
   Option        &quot;Resolution&quot;          &qu ot;3500&quot;<br>
EndSection<br>
<br>
###########################################################   MONITORS<br >
<br>
Section &quot;Monitor&quot;<br>
   Identifier    &quot;IIYAMA24&quot;<br>
   # ANALOGIC<br>
   HorizSync     24.0 - 80.0<br>
   VertRefresh   55 - 75<br>
   # DIGITAL<br>
#    HorizSync    30.0 - 80.0<br>
#    VertRefresh  55 - 75<br>
   Option        &quot;DPMS&quot;                &quot;TRUE&quot;<br>
   Option        &quot;RandR&quot;               &quot;TRUE&quot;<br>
EndSection<br>
<br>
###########################################################   GC<br>
<br>
Section &quot;Device&quot;<br>
   Identifier  &quot;NVIDIA GeForce3-TI200&quot;<br>
   Driver      &quot;nouveau&quot;<br>
   Option      &quot;backingstore&quot;          &quot ;True&quot;<br>
EndSection<br>
<br>
###########################################################   SCREEN<br>
<br>
Section &quot;Screen&quot;<br>
   Identifier     &quot;Screen0&quot;<br>
   Device         &quot;NVIDIA GeForce3-TI200&quot;<br>
   Monitor        &quot;IIYAMA24&quot;<br>
   DefaultDepth   24<br>
<div class="im">    SubSection     &quot;Display&quot;<br>
       Viewport   0 0<br>
       Depth      24<br>
</div>        Modes      &quot;1920x1080&quot;<br>
   EndSubSection<br>
EndSection<br>
<br>
###########################################################   EXTENSIONS< br>
<br>
Section &quot;DRI&quot;<br>
   Mode 0666<br>
EndSection<br>
<br>
########################################################### EOF<br>
<br>
--<br>
bi, n:<br>
       When *everybody* thinks you&#39;re a pervert.<br>
<div class="im"><br>
--<br>
Lisez la FAQ de la liste avant de poser une question :<br>
<br>
Pour vous DESABONNER, envoyez un message avec comme objet &quot;unsubscribe &quot;<br>
vers En cas de soucis, contactez EN ANGLAIS <br>
</blockquote></div><br>

--90e6ba6e8ef23a6ccb04baa5b3bf--

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Bzzz
Le #24301791
On Wed, 7 Mar 2012 12:45:46 +0100
Luxpopuli Open source

Mon problème de plantage intempestif ne vient pas du driver proprio car
même avec «nouveau» mon PC plante.
Il doit donc y avoir un problème hardware de carte mère.

Je suis donc revenu au driver proprio et j'attendrai de pouvoir changer la
carte mère.



Avant d'incriminer la CM, il-y-a de la marge.

--
Obviously the only rational solution to your problem is suicide.

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Publicité
Poster une réponse
Anonyme