Bonjour.
Que pensent les experts des smarttools de mon disque ?
Merci.
[root@tux cavelier2]# smartctl -a /dev/hda
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.8 family
Device Model: ST3400632A
Serial Number: 4NF1B08X
Firmware Version: 3.04
User Capacity: 400,088,457,216 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Feb 11 09:51:58 2010 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has
ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 134) minutes.
SMART Error Log Version: 1
ATA Error Count: 159 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 159 occurred at disk power-on lifetime: 4443 hours (185 days + 3
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 51 26 00 e0 Error: UNC 16 sectors at LBA = 0x00002651 = 9809
Error 158 occurred at disk power-on lifetime: 4443 hours (185 days + 3
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 51 26 00 e0 Error: UNC at LBA = 0x00002651 = 9809
Error 157 occurred at disk power-on lifetime: 4443 hours (185 days + 3
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 51 26 00 e0 Error: UNC at LBA = 0x00002651 = 9809
Error 156 occurred at disk power-on lifetime: 4443 hours (185 days + 3
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 51 26 00 e0 Error: UNC at LBA = 0x00002651 = 9809
Error 155 occurred at disk power-on lifetime: 4443 hours (185 days + 3
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 51 26 00 e0 Error: UNC at LBA = 0x00002651 = 9809
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00%
4374 -
# 2 Extended offline Completed without error 00%
4218 -
# 3 Extended offline Interrupted (host reset) 30%
4040 -
# 4 Extended offline Interrupted (host reset) 20%
3883 -
# 5 Extended offline Completed without error 00%
3708 -
# 6 Extended offline Interrupted (host reset) 90%
328 -
# 7 Short offline Completed without error 00%
328 -
# 8 Short offline Completed without error 00%
319 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
You have new mail in /var/spool/mail/cavelier2
[root@tux cavelier2]#
--
cordialement jean-jacques.
Ce message a été écrit sur un système libre mandriva
"Tant que l'homme sera mortel, il ne pourra pas être totalement
décontracté..."
Woody Allen.