Bonjour =C3=A0 tous,
une petite question pas cruciale mais cela me ferait gagner du temps
si je pouvais fluidifier mes backups mobiles sur 1 disque 1To USB 3.0
Samsung
Il marche tr=C3=A8s bien en USB 2.0 mais je viens d'essayer de le monter en
USB 3.0 et je ne vois rien dans les logs qui me prouve que cela
fonctionne...
La carte expresscard USB 3.0 marche bien elle , les logs du kernel le
prouvent....
Je suis en aptosid avec un kernel tr=C3=A8s r=C3=A9cent
root@aptosidbox:/home/romje# lspci |grep -i USB
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 06)
05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host
Controller (rev 03)
root@aptosidbox:/home/romje# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip
Fingerprint Sensor
Bus 003 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller
Bus 003 Device 005: ID 17ef:4816 Lenovo
Bus 004 Device 003: ID 05c6:9204 Qualcomm, Inc.
extrait d'une sortie dmesg:
[ 802.689709] xhci_hcd 0000:05:00.0: PME# disabled
[ 802.689736] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 802.715119] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 802.726033] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem
0xf2728000-0xf27283ff] (PCI address [0xf2728000-0xf27283ff])
[ 802.726044] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 802.726068] ehci_hcd 0000:00:1a.0: restoring config space at offset
0xf (was 0x400, writing 0x40b)
[ 802.726098] ehci_hcd 0000:00:1a.0: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900102)
[ 802.726134] ehci_hcd 0000:00:1a.0: PME# disabled
[ 802.726142] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 802.726149] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 802.726162] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> I=
RQ 23
[ 802.726173] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 802.748439] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 802.758898] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem
0xf2728400-0xf27287ff] (PCI address [0xf2728400-0xf27287ff])
[ 802.758909] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 802.758932] ehci_hcd 0000:00:1d.0: restoring config space at offset
0xf (was 0x400, writing 0x40b)
[ 802.758962] ehci_hcd 0000:00:1d.0: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900102)
[ 802.759001] ehci_hcd 0000:00:1d.0: PME# disabled
[ 802.759010] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 802.759017] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 802.759028] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> I=
RQ 19
[ 802.759038] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 804.930058] xhci_hcd 0000:05:00.0: PME# enabled
[ 807.324607] xhci_hcd 0000:05:00.0: PME# disabled
[ 807.324631] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 809.915125] xhci_hcd 0000:05:00.0: PME# enabled
[ 813.929992] ehci_hcd 0000:00:1a.0: PCI INT D disabled
[ 813.930050] ehci_hcd 0000:00:1a.0: PME# enabled
[ 813.937893] ehci_hcd 0000:00:1d.0: PCI INT D disabled
[ 813.937949] ehci_hcd 0000:00:1d.0: PME# enabled
[ 813.940952] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 813.948928] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 908.483048] xhci_hcd 0000:05:00.0: PME# disabled
[ 908.483071] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 908.505248] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 908.515819] ehci_hcd 0000:00:1a.0: BAR 0: set to [mem
0xf2728000-0xf27283ff] (PCI address [0xf2728000-0xf27283ff])
[ 908.515831] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 908.515854] ehci_hcd 0000:00:1a.0: restoring config space at offset
0xf (was 0x400, writing 0x40b)
[ 908.515885] ehci_hcd 0000:00:1a.0: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900102)
[ 908.515919] ehci_hcd 0000:00:1a.0: PME# disabled
[ 908.515927] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 908.515934] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 908.515947] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> I=
RQ 23
[ 908.515958] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 908.536102] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 908.546746] ehci_hcd 0000:00:1d.0: BAR 0: set to [mem
0xf2728400-0xf27287ff] (PCI address [0xf2728400-0xf27287ff])
[ 908.546758] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 908.546782] ehci_hcd 0000:00:1d.0: restoring config space at offset
0xf (was 0x400, writing 0x40b)
[ 908.546812] ehci_hcd 0000:00:1d.0: restoring config space at offset
0x1 (was 0x2900000, writing 0x2900102)
[ 908.546849] ehci_hcd 0000:00:1d.0: PME# disabled
[ 908.546857] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 908.546865] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 908.546876] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> I=
RQ 19
[ 908.546886] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 910.663637] xhci_hcd 0000:05:00.0: PME# enabled
[ 914.787176] ehci_hcd 0000:00:1a.0: PCI INT D disabled
[ 914.787234] ehci_hcd 0000:00:1a.0: PME# enabled
[ 914.798131] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 914.831064] ehci_hcd 0000:00:1d.0: PCI INT D disabled
[ 914.831114] ehci_hcd 0000:00:1d.0: PME# enabled
[ 914.841998] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
les entr=C3=A9es en xhci_hcd sont bien celles concern=C3=A9es par l'usb 3.0=
?
mon disque USB contient un volume group LVM2 (peut etre pas une bonne
id=C3=A9e mais il y est lol)
vgscan ne voit rien ....
je pr=C3=A9cise que le disque semble bien branch=C3=A9 et tourne , il est
convenablement aliment=C3=A9...
Avez vous des pistes pour d=C3=A9bloquer la situation ?
Google n'a pas =C3=A9t=C3=A9 trop mon ami sur le coup....
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers debian-user-french-REQUEST@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmaster@lists.debian.org
Archive: http://lists.debian.org/CAEGYFELUUhz+=sgYGczO23XKz=TDuu+LPtFFwgNoyt3BpcLrtA@mail.gmail.com
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
jerome moliere
Pour info j'ai le même comportement sous Squeeze avec un noyau liquori x: :/home/romje# uname -a Linux debian 3.1.0-1.dmz.2-liquorix-amd64 #1 ZEN SMP PREEMPT Sat Nov 12 17:55:12 CST 2011 x86_64 GNU/Linu
:/home/romje# lspci -v|grep -i usb 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI]) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI]) 05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30)
pas de trace du drive usb externe et de ses filesystems dans le mount :/home/romje# mount /dev/sda9 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode55) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode55) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,modeb0) /dev/sda8 on /home type ext4 (rw) fusectl on /sys/fs/fuse/connections type fusectl (rw) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/romje/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=romje)
si quelqu'un a une piste je suis preneur... J.MOLIERE - Mentor/J auteur Eyrolles blog: http://romjethoughts.blogspot.com
-- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe" vers En cas de soucis, contactez EN ANGLAIS Archive: http://lists.debian.org/
Pour info j'ai le même comportement sous Squeeze avec un noyau liquori x:
root@debian:/home/romje# uname -a
Linux debian 3.1.0-1.dmz.2-liquorix-amd64 #1 ZEN SMP PREEMPT Sat Nov
12 17:55:12 CST 2011 x86_64 GNU/Linu
root@debian:/home/romje# lspci -v|grep -i usb
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host
Controller (rev 03) (prog-if 30)
pas de trace du drive usb externe et de ses filesystems dans le mount
root@debian:/home/romje# mount
/dev/sda9 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/sda8 on /home type ext4 (rw)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc
(rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/romje/.gvfs type fuse.gvfs-fuse-daemon
(rw,nosuid,nodev,user=romje)
si quelqu'un a une piste je suis preneur...
J.MOLIERE - Mentor/J
auteur Eyrolles
blog: http://romjethoughts.blogspot.com
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers debian-user-french-REQUEST@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmaster@lists.debian.org
Archive: http://lists.debian.org/CAEGYFEJDt_m6LJowk1y4jko0_teFB3QpoZ_Wi7JjsnS77noPAw@mail.gmail.com
Pour info j'ai le même comportement sous Squeeze avec un noyau liquori x: :/home/romje# uname -a Linux debian 3.1.0-1.dmz.2-liquorix-amd64 #1 ZEN SMP PREEMPT Sat Nov 12 17:55:12 CST 2011 x86_64 GNU/Linu
:/home/romje# lspci -v|grep -i usb 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI]) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI]) 05:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30)
pas de trace du drive usb externe et de ses filesystems dans le mount :/home/romje# mount /dev/sda9 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode55) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode55) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,modeb0) /dev/sda8 on /home type ext4 (rw) fusectl on /sys/fs/fuse/connections type fusectl (rw) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/romje/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=romje)
si quelqu'un a une piste je suis preneur... J.MOLIERE - Mentor/J auteur Eyrolles blog: http://romjethoughts.blogspot.com
-- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe" vers En cas de soucis, contactez EN ANGLAIS Archive: http://lists.debian.org/
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers debian-user-french-REQUEST@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmaster@lists.debian.org
Archive: http://lists.debian.org/CAEGYFELTPZawmw07gN1J6kmFPY06WmUCiw99uzruKHJ8T_nx3Q@mail.gmail.com
-- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe" vers En cas de soucis, contactez EN ANGLAIS Archive: http://lists.debian.org/
J
Le jeudi 17 novembre 2011 à 13:56 +0100, jerome moliere a écrit :
maintenant 1 volume trouvé !!!! pourquoi faut il décharger/recharger le driver ? mystère!!!
Je n'ai pas vraiment regardé le pourquoi du comment ni pris le temps de regarder quoique ce soit, mais je me demande si mon USB3 n'a pas un peu de mal à sortir de veille dans le genre de symptôme (obligé de débrancher/rebrancher la clé).
-- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe" vers En cas de soucis, contactez EN ANGLAIS Archive: http://lists.debian.org/
Le jeudi 17 novembre 2011 à 13:56 +0100, jerome moliere a écrit :
maintenant 1 volume trouvé !!!!
pourquoi faut il décharger/recharger le driver ? mystère!!!
Je n'ai pas vraiment regardé le pourquoi du comment ni pris le temps de
regarder quoique ce soit, mais je me demande si mon USB3 n'a pas un peu
de mal à sortir de veille dans le genre de symptôme (obligé de
débrancher/rebrancher la clé).
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers debian-user-french-REQUEST@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmaster@lists.debian.org
Archive: http://lists.debian.org/1321550831.7832.9.camel@jd
Le jeudi 17 novembre 2011 à 13:56 +0100, jerome moliere a écrit :
maintenant 1 volume trouvé !!!! pourquoi faut il décharger/recharger le driver ? mystère!!!
Je n'ai pas vraiment regardé le pourquoi du comment ni pris le temps de regarder quoique ce soit, mais je me demande si mon USB3 n'a pas un peu de mal à sortir de veille dans le genre de symptôme (obligé de débrancher/rebrancher la clé).
-- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe" vers En cas de soucis, contactez EN ANGLAIS Archive: http://lists.debian.org/