Nvidia : mode 1920*1080 changé à chaque reboot

Le
Nicolas FRANCOIS
Salut.

J'ai réglé avec nvidia-settings le mode par défaut au mode o=
ptimal de
mon écran, soit 1920*1080*60Hz. Lorsque je boote, l'écran de conn=
exion
est dans le bon mode. Mais quand je me loggue, l'écran s'éteint, =
et se
rallume en 1680*1050. Et ça m'énerve

J'ai cherché dans mon répertoire perso, et ai vu deux choses : un
fichier .nvidia-settings-rc, qui ne contient pas de résolution par
défaut, et un répertoire .nv, qui ne contient qu'un sous-rép=
ertoire
GLCache avec deux sous-répertoires aux noms idiots et des trucs
bizarres dedans.

Comment faire pour ne pas modifier les réglages du
fichier /etc/X11/xorg.conf ?

D'avance merci.

bye

--

Nicolas FRANCOIS | /
http://nicolas.francois.free.fr | |__|
X--/\
We are the Micro$oft. __V
Resistance is futile.
You will be assimilated. darthvader penguin

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers debian-user-french-REQUEST@lists.debian.org
En cas de soucis, contactez EN ANGLAIS listmaster@lists.debian.org
Archive: http://lists.debian.org/20131110205613.682d4c35@gaston.baronie.vez
Vidéos High-Tech et Jeu Vidéo
Téléchargements
Vos réponses
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
François Patte
Le #25777662
This is an OpenPGP/MIME signed message (RFC 4880 and 3156)
------enig2WVWVDJHRROGGMVBPIRQS
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

Le 10/11/2013 20:56, Nicolas FRANCOIS a écrit :
Salut.

J'ai réglé avec nvidia-settings le mode par défaut au mo de optimal de
mon écran, soit 1920*1080*60Hz. Lorsque je boote, l'écran de connexion
est dans le bon mode. Mais quand je me loggue, l'écran s'étei nt, et se
rallume en 1680*1050. Et ça m'énerve...

J'ai cherché dans mon répertoire perso, et ai vu deux choses : un
fichier .nvidia-settings-rc, qui ne contient pas de résolution par
défaut, et un répertoire .nv, qui ne contient qu'un sous-rà ©pertoire
GLCache avec deux sous-répertoires aux noms idiots et des trucs
bizarres dedans.



Que se passe-t-il si on vire ces deux trucs (mv.... de façon à revenir
s'il y a un pb)?


Comment faire pour ne pas modifier les réglages du
fichier /etc/X11/xorg.conf ?



Que contient la section "Screen"?



--
François Patte
UFR de mathématiques et informatique
Laboratoire CNRS MAP5, UMR 8145
Université Paris Descartes
45, rue des Saints Pères
F-75270 Paris Cedex 06
Tél. +33 (0)1 8394 5849
http://www.math-info.univ-paris5.fr/~patte


------enig2WVWVDJHRROGGMVBPIRQS
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
Comment: Using GnuPG with Icedove - http://www.enigmail.net/

iEYEARECAAYFAlKAsGkACgkQdE6C2dhV2JVQPwCfdlhnArN3JpJd9EH0HioPVKLi
dmEAn1IADSKlNsYSt4BFGSm2PI6GAp+0
=VJge
-----END PGP SIGNATURE-----

------enig2WVWVDJHRROGGMVBPIRQS--

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Haricophile
Le #25778052
Le dimanche 10 novembre 2013 20:56:13 Nicolas FRANCOIS a écrit :
Comment faire pour ne pas modifier les réglages du
fichier /etc/X11/xorg.conf ?



déjà en transférant la conf dans /etc/X11/xorg.conf.d/

Visite le dossier /usr/share/X11/xorg.conf.d tu verra la conf par déf aut
du packager et ça te donnera un modèle. L'avantage c'est que le
contenu de ce dossier gère dynamiquement la conf en s'appuyant sur
UDEV, alors que /etc/X11/xorg.conf est statique.

Ça ne résoudra peut-être pas ton problème, mais en tout cas ç a te
permet de configurer différents écrans (souris/tablette....) en "pl ug'n
play". C'est la manière moderne de configurer.

--
Haricophile -

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Nicolas FRANCOIS
Le #25780382
--MP_/=jg8nfxGg6JxgMSYeqbTeVI
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Le Mon, 11 Nov 2013 11:24:34 +0100,
François Patte
Le 10/11/2013 20:56, Nicolas FRANCOIS a écrit :
> Salut.
>
> J'ai réglé avec nvidia-settings le mode par défaut au mo de optimal
> de mon écran, soit 1920*1080*60Hz. Lorsque je boote, l'écran de
> connexion est dans le bon mode. Mais quand je me loggue, l'écran
> s'éteint, et se rallume en 1680*1050. Et ça m'énerve...
>
> J'ai cherché dans mon répertoire perso, et ai vu deux choses : un
> fichier .nvidia-settings-rc, qui ne contient pas de résolution par
> défaut, et un répertoire .nv, qui ne contient qu'un sous-rà ©pertoire
> GLCache avec deux sous-répertoires aux noms idiots et des trucs
> bizarres dedans.

Que se passe-t-il si on vire ces deux trucs (mv.... de façon à revenir
s'il y a un pb)?



Les virer ne change rien (ce qui est plutôt rassurant !)

> Comment faire pour ne pas modifier les réglages du
> fichier /etc/X11/xorg.conf ?

Que contient la section "Screen"?



Ça :

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-0"
Option "metamodes" "1920x1080_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

D'autre part, le fichier Xorg.log.0 contient des choses bizarres. Je le
joins en pièce jointe. Plein de sections qui se répètent, et UNE
mention d'un passage en 1680*1050...

bye

--

Nicolas FRANCOIS | /
http://nicolas.francois.free.fr | |__|
X--/\
We are the Micro$oft. __V
Resistance is futile.
You will be assimilated. darthvader penguin

--MP_/=jg8nfxGg6JxgMSYeqbTeVI
Content-Type: text/x-log
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment; filename=Xorg.0.log

[124958.246]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[124958.246] X Protocol Version 11, Revision 0
[124958.246] Build Operating System: Linux 3.10-3-amd64 x86_64 Debian
[124958.246] Current Operating System: Linux gaston 3.2.0-4-amd64 #1 SMP De bian 3.2.51-1 x86_64
[124958.247] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUIDƒ94e6cf-aeb2-4fbb-bc58-1b58608120b5 ro vgaw3 quiet
[124958.247] Build Date: 21 October 2013 04:49:48PM
[124958.247] xorg-server 2:1.12.4-6+deb7u1 (Moritz Muehlenhoff [124958.247] Current version of pixman: 0.26.0
[124958.247] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[124958.247] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[124958.247] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 12 07: 26:38 2013
[124958.250] (==) Using config file: "/etc/X11/xorg.conf"
[124958.250] (==) Using system config directory "/usr/share/X11/xorg.co nf.d"
[124958.252] (==) ServerLayout "Layout0"
[124958.252] (**) |-->Screen "Screen0" (0)
[124958.252] (**) | |-->Monitor "Monitor0"
[124958.252] (**) | |-->Device "Device0"
[124958.252] (**) |-->Input Device "Keyboard0"
[124958.252] (**) |-->Input Device "Mouse0"
[124958.252] (**) Option "Xinerama" "0"
[124958.252] (==) Automatically adding devices
[124958.252] (==) Automatically enabling devices
[124958.252] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not ex ist.
[124958.252] Entry deleted from font path.
[124958.252] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/Tr ueType" does not exist.
[124958.252] Entry deleted from font path.
[124958.252] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[124958.252] (==) ModulePath set to "/usr/lib/xorg/modules"
[124958.252] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' o r 'vmmouse' will be disabled.
[124958.252] (WW) Disabling Keyboard0
[124958.252] (WW) Disabling Mouse0
[124958.253] (II) Loader magic: 0x7fdb4da17ae0
[124958.253] (II) Module ABI versions:
[124958.253] X.Org ANSI C Emulation: 0.4
[124958.253] X.Org Video Driver: 12.1
[124958.253] X.Org XInput driver : 16.0
[124958.253] X.Org Server Extension : 6.0
[124958.253] (--) PCI:*(0:1:0:0) 10de:1040:10de:0915 rev 161, Mem @ 0xfd000 000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000bc00/1 28, BIOS @ 0x????????/524288
[124958.253] (II) Open ACPI successful (/var/run/acpid.socket)
[124958.253] (II) LoadModule: "extmod"
[124958.274] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[124958.275] (II) Module extmod: vendor="X.Org Foundation"
[124958.275] compiled for 1.12.4, module version = 1.0.0
[124958.275] Module class: X.Org Server Extension
[124958.275] ABI class: X.Org Server Extension, version 6.0
[124958.275] (II) Loading extension SELinux
[124958.275] (II) Loading extension MIT-SCREEN-SAVER
[124958.275] (II) Loading extension XFree86-VidModeExtension
[124958.275] (II) Loading extension XFree86-DGA
[124958.275] (II) Loading extension DPMS
[124958.275] (II) Loading extension XVideo
[124958.275] (II) Loading extension XVideo-MotionCompensation
[124958.275] (II) Loading extension X-Resource
[124958.275] (II) LoadModule: "dbe"
[124958.275] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[124958.275] (II) Module dbe: vendor="X.Org Foundation"
[124958.275] compiled for 1.12.4, module version = 1.0.0
[124958.275] Module class: X.Org Server Extension
[124958.275] ABI class: X.Org Server Extension, version 6.0
[124958.275] (II) Loading extension DOUBLE-BUFFER
[124958.275] (II) LoadModule: "glx"
[124958.275] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[124958.327] (II) Module glx: vendor="NVIDIA Corporation"
[124958.327] compiled for 4.0.2, module version = 1.0.0
[124958.327] Module class: X.Org Server Extension
[124958.327] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:46:57 PDT 2013
[124958.327] (II) Loading extension GLX
[124958.327] (II) LoadModule: "record"
[124958.327] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[124958.327] (II) Module record: vendor="X.Org Foundation"
[124958.327] compiled for 1.12.4, module version = 1.13.0
[124958.327] Module class: X.Org Server Extension
[124958.327] ABI class: X.Org Server Extension, version 6.0
[124958.327] (II) Loading extension RECORD
[124958.327] (II) LoadModule: "dri"
[124958.327] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[124958.327] (II) Module dri: vendor="X.Org Foundation"
[124958.327] compiled for 1.12.4, module version = 1.0.0
[124958.327] ABI class: X.Org Server Extension, version 6.0
[124958.327] (II) Loading extension XFree86-DRI
[124958.327] (II) LoadModule: "dri2"
[124958.328] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[124958.328] (II) Module dri2: vendor="X.Org Foundation"
[124958.328] compiled for 1.12.4, module version = 1.2.0
[124958.328] ABI class: X.Org Server Extension, version 6.0
[124958.328] (II) Loading extension DRI2
[124958.328] (II) LoadModule: "nvidia"
[124958.328] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[124958.335] (II) Module nvidia: vendor="NVIDIA Corporation"
[124958.335] compiled for 4.0.2, module version = 1.0.0
[124958.335] Module class: X.Org Video Driver
[124958.336] (II) NVIDIA dlloader X Driver 304.88 Wed Mar 27 14:28:14 PDT 2013
[124958.336] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[124958.336] (++) using VT number 8

[124958.343] (II) Loading sub module "fb"
[124958.343] (II) LoadModule: "fb"
[124958.344] (II) Loading /usr/lib/xorg/modules/libfb.so
[124958.344] (II) Module fb: vendor="X.Org Foundation"
[124958.344] compiled for 1.12.4, module version = 1.0.0
[124958.344] ABI class: X.Org ANSI C Emulation, version 0.4
[124958.344] (II) Loading sub module "wfb"
[124958.344] (II) LoadModule: "wfb"
[124958.345] (II) Loading /usr/lib/xorg/modules/libwfb.so
[124958.345] (II) Module wfb: vendor="X.Org Foundation"
[124958.345] compiled for 1.12.4, module version = 1.0.0
[124958.345] ABI class: X.Org ANSI C Emulation, version 0.4
[124958.345] (II) Loading sub module "ramdac"
[124958.345] (II) LoadModule: "ramdac"
[124958.345] (II) Module "ramdac" already built-in
[124958.345] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[124958.345] (==) NVIDIA(0): RGB weight 888
[124958.345] (==) NVIDIA(0): Default visual is TrueColor
[124958.345] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[124958.345] (**) NVIDIA(0): Option "Stereo" "0"
[124958.345] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[124958.345] (**) NVIDIA(0): Stereo disabled by request
[124958.345] (**) NVIDIA(0): Option "MetaModes" "1920x1080_60 +0+0"
[124958.346] (**) NVIDIA(0): Enabling 2D acceleration
[124958.979] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124958.979] (II) NVIDIA(GPU-0): Vision stereo.
[124958.980] (II) NVIDIA(0): NVIDIA GPU GeForce GT 520 (GF119) at PCI:1:0:0 (GPU-0)
[124958.980] (--) NVIDIA(0): Memory: 1048576 kBytes
[124958.980] (--) NVIDIA(0): VideoBIOS: 75.19.1b.00.01
[124958.980] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[124958.980] (--) NVIDIA(0): Interlaced video modes are supported on this G PU
[124958.982] (--) NVIDIA(0): Valid display device(s) on GeForce GT 520 at P CI:1:0:0
[124958.982] (--) NVIDIA(0): CRT-0
[124958.982] (--) NVIDIA(0): CRT-1
[124958.982] (--) NVIDIA(0): Samsung S24B300 (DFP-0) (connected)
[124958.982] (--) NVIDIA(0): DFP-1
[124958.982] (--) NVIDIA(0): CRT-0: 480.0 MHz maximum pixel clock
[124958.982] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[124958.982] (--) NVIDIA(0): Samsung S24B300 (DFP-0): 330.0 MHz maximum pix el clock
[124958.983] (--) NVIDIA(0): Samsung S24B300 (DFP-0): Internal Dual Link TM DS
[124958.983] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[124958.983] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[124958.983] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124958.983] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124958.983] (**) NVIDIA(0): been enabled on all display devices.)
[124958.983] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124958.983] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124958.983] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124958.983] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124958.983] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124958.983] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124958.983] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124958.983] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124958.983] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124958.983] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124958.983] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124958.983] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124958.983] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124958.983] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124958.983] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124958.985] (II) NVIDIA(0): Validated MetaModes:
[124958.985] (II) NVIDIA(0): "1920x1080_60+0+0"
[124958.985] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 10 80
[124959.016] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi " X config
[124959.016] (--) NVIDIA(0): option
[124959.016] (--) Depth 24 pixmap format is 32 bpp
[124959.016] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect m emory
[124959.016] (II) NVIDIA: access.
[124959.022] (II) NVIDIA(0): Setting mode "1920x1080_60+0+0"
[124959.060] (II) Loading extension NV-GLX
[124959.085] (==) NVIDIA(0): Disabling shared memory pixmaps
[124959.085] (==) NVIDIA(0): Backing store disabled
[124959.085] (==) NVIDIA(0): Silken mouse enabled
[124959.085] (**) NVIDIA(0): DPMS enabled
[124959.085] (II) Loading extension NV-CONTROL
[124959.085] (II) Loading extension XINERAMA
[124959.086] (II) Loading sub module "dri2"
[124959.086] (II) LoadModule: "dri2"
[124959.086] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[124959.086] (II) Module dri2: vendor="X.Org Foundation"
[124959.086] compiled for 1.12.4, module version = 1.2.0
[124959.086] ABI class: X.Org Server Extension, version 6.0
[124959.086] (II) NVIDIA(0): [DRI2] Setup complete
[124959.086] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[124959.087] (--) RandR disabled
[124959.087] (II) Initializing built-in extension Generic Event Extension
[124959.087] (II) Initializing built-in extension SHAPE
[124959.087] (II) Initializing built-in extension MIT-SHM
[124959.087] (II) Initializing built-in extension XInputExtension
[124959.087] (II) Initializing built-in extension XTEST
[124959.087] (II) Initializing built-in extension BIG-REQUESTS
[124959.087] (II) Initializing built-in extension SYNC
[124959.087] (II) Initializing built-in extension XKEYBOARD
[124959.087] (II) Initializing built-in extension XC-MISC
[124959.087] (II) Initializing built-in extension SECURITY
[124959.087] (II) Initializing built-in extension XINERAMA
[124959.087] (II) Initializing built-in extension XFIXES
[124959.087] (II) Initializing built-in extension RENDER
[124959.087] (II) Initializing built-in extension RANDR
[124959.087] (II) Initializing built-in extension COMPOSITE
[124959.087] (II) Initializing built-in extension DAMAGE
[124959.087] (II) SELinux: Disabled on system
[124959.088] (II) Initializing extension GLX
[124959.156] (II) config/udev: Adding input device Power Button (/dev/input /event5)
[124959.156] (**) Power Button: Applying InputClass "evdev keyboard catchal l"
[124959.156] (II) LoadModule: "evdev"
[124959.157] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[124959.157] (II) Module evdev: vendor="X.Org Foundation"
[124959.157] compiled for 1.12.1, module version = 2.7.0
[124959.157] Module class: X.Org XInput Driver
[124959.157] ABI class: X.Org XInput driver, version 16.0
[124959.157] (II) Using input driver 'evdev' for 'Power Button'
[124959.157] (**) Power Button: always reports core events
[124959.157] (**) evdev: Power Button: Device: "/dev/input/event5"
[124959.157] (--) evdev: Power Button: Vendor 0 Product 0x1
[124959.157] (--) evdev: Power Button: Found keys
[124959.157] (II) evdev: Power Button: Configuring as keyboard
[124959.157] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPW RBN:00/input/input5/event5"
[124959.157] (II) XINPUT: Adding extended input device "Power Button" (type : KEYBOARD, id 6)
[124959.157] (**) Option "xkb_rules" "evdev"
[124959.157] (**) Option "xkb_model" "pc105"
[124959.157] (**) Option "xkb_layout" "fr"
[124959.157] (**) Option "xkb_variant" "latin9"
[124959.180] (II) config/udev: Adding input device Power Button (/dev/input /event4)
[124959.180] (**) Power Button: Applying InputClass "evdev keyboard catchal l"
[124959.180] (II) Using input driver 'evdev' for 'Power Button'
[124959.180] (**) Power Button: always reports core events
[124959.180] (**) evdev: Power Button: Device: "/dev/input/event4"
[124959.181] (--) evdev: Power Button: Vendor 0 Product 0x1
[124959.181] (--) evdev: Power Button: Found keys
[124959.181] (II) evdev: Power Button: Configuring as keyboard
[124959.181] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSY BUS:00/PNP0C0C:00/input/input4/event4"
[124959.181] (II) XINPUT: Adding extended input device "Power Button" (type : KEYBOARD, id 7)
[124959.181] (**) Option "xkb_rules" "evdev"
[124959.181] (**) Option "xkb_model" "pc105"
[124959.181] (**) Option "xkb_layout" "fr"
[124959.181] (**) Option "xkb_variant" "latin9"
[124959.181] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm =7 (/dev/input/event8)
[124959.181] (II) No input driver specified, ignoring this device.
[124959.181] (II) This device may have been added with another device file.
[124959.181] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm =3 (/dev/input/event9)
[124959.181] (II) No input driver specified, ignoring this device.
[124959.181] (II) This device may have been added with another device file.
[124959.182] (II) config/udev: Adding input device Logitech USB Receiver (/ dev/input/event0)
[124959.182] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[124959.182] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[124959.182] (**) Logitech USB Receiver: always reports core events
[124959.182] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[124959.182] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[124959.182] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[124959.182] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[124959.182] (--) evdev: Logitech USB Receiver: Found relative axes
[124959.182] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[124959.182] (II) evdev: Logitech USB Receiver: Configuring as mouse
[124959.182] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[124959.182] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[124959.182] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, Emul ateWheelInertia: 10, EmulateWheelTimeout: 200
[124959.182] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:0 0:1a.2/usb5/5-1/5-1:1.0/input/input0/event0"
[124959.182] (II) XINPUT: Adding extended input device "Logitech USB Receiv er" (type: MOUSE, id 8)
[124959.182] (II) evdev: Logitech USB Receiver: initialized for relative ax es.
[124959.182] (**) Logitech USB Receiver: (accel) keeping acceleration schem e 1
[124959.182] (**) Logitech USB Receiver: (accel) acceleration profile 0
[124959.182] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[124959.182] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[124959.182] (II) config/udev: Adding input device Logitech USB Receiver (/ dev/input/mouse0)
[124959.182] (II) No input driver specified, ignoring this device.
[124959.182] (II) This device may have been added with another device file.
[124959.183] (II) config/udev: Adding input device Logitech USB Receiver (/ dev/input/event1)
[124959.183] (**) Logitech USB Receiver: Applying InputClass "evdev keyboar d catchall"
[124959.183] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[124959.183] (**) Logitech USB Receiver: always reports core events
[124959.183] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[124959.183] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[124959.183] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[124959.183] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[124959.183] (--) evdev: Logitech USB Receiver: Found relative axes
[124959.183] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes t o exist.
[124959.183] (--) evdev: Logitech USB Receiver: Found absolute axes
[124959.183] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes t o exist.
[124959.183] (--) evdev: Logitech USB Receiver: Found keys
[124959.183] (II) evdev: Logitech USB Receiver: Configuring as mouse
[124959.183] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[124959.183] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[124959.183] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[124959.183] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, Emul ateWheelInertia: 10, EmulateWheelTimeout: 200
[124959.183] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:0 0:1a.2/usb5/5-1/5-1:1.1/input/input1/event1"
[124959.183] (II) XINPUT: Adding extended input device "Logitech USB Receiv er" (type: KEYBOARD, id 9)
[124959.183] (**) Option "xkb_rules" "evdev"
[124959.183] (**) Option "xkb_model" "pc105"
[124959.183] (**) Option "xkb_layout" "fr"
[124959.183] (**) Option "xkb_variant" "latin9"
[124959.183] (II) evdev: Logitech USB Receiver: initialized for relative ax es.
[124959.183] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[124959.183] (**) Logitech USB Receiver: (accel) keeping acceleration schem e 1
[124959.183] (**) Logitech USB Receiver: (accel) acceleration profile 0
[124959.183] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[124959.183] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[124959.184] (II) config/udev: Adding input device HDA Digital PCBeep (/dev /input/event7)
[124959.184] (II) No input driver specified, ignoring this device.
[124959.184] (II) This device may have been added with another device file.
[124959.184] (II) config/udev: Adding input device LITEON Technology USB Mu ltimedia Keyboard (/dev/input/event2)
[124959.184] (**) LITEON Technology USB Multimedia Keyboard: Applying Input Class "evdev keyboard catchall"
[124959.184] (II) Using input driver 'evdev' for 'LITEON Technology USB Mul timedia Keyboard'
[124959.184] (**) LITEON Technology USB Multimedia Keyboard: always reports core events
[124959.184] (**) evdev: LITEON Technology USB Multimedia Keyboard: Device: "/dev/input/event2"
[124959.184] (--) evdev: LITEON Technology USB Multimedia Keyboard: Vendor 0x46d Product 0xc313
[124959.184] (--) evdev: LITEON Technology USB Multimedia Keyboard: Found k eys
[124959.184] (II) evdev: LITEON Technology USB Multimedia Keyboard: Configu ring as keyboard
[124959.184] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:0 0:1d.0/usb6/6-1/6-1:1.0/input/input2/event2"
[124959.184] (II) XINPUT: Adding extended input device "LITEON Technology U SB Multimedia Keyboard" (type: KEYBOARD, id 10)
[124959.184] (**) Option "xkb_rules" "evdev"
[124959.184] (**) Option "xkb_model" "pc105"
[124959.184] (**) Option "xkb_layout" "fr"
[124959.184] (**) Option "xkb_variant" "latin9"
[124959.185] (II) config/udev: Adding input device LITEON Technology USB Mu ltimedia Keyboard (/dev/input/event3)
[124959.185] (**) LITEON Technology USB Multimedia Keyboard: Applying Input Class "evdev keyboard catchall"
[124959.185] (II) Using input driver 'evdev' for 'LITEON Technology USB Mul timedia Keyboard'
[124959.185] (**) LITEON Technology USB Multimedia Keyboard: always reports core events
[124959.185] (**) evdev: LITEON Technology USB Multimedia Keyboard: Device: "/dev/input/event3"
[124959.185] (--) evdev: LITEON Technology USB Multimedia Keyboard: Vendor 0x46d Product 0xc313
[124959.185] (--) evdev: LITEON Technology USB Multimedia Keyboard: Found k eys
[124959.185] (II) evdev: LITEON Technology USB Multimedia Keyboard: Configu ring as keyboard
[124959.185] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:0 0:1d.0/usb6/6-1/6-1:1.1/input/input3/event3"
[124959.185] (II) XINPUT: Adding extended input device "LITEON Technology U SB Multimedia Keyboard" (type: KEYBOARD, id 11)
[124959.185] (**) Option "xkb_rules" "evdev"
[124959.185] (**) Option "xkb_model" "pc105"
[124959.185] (**) Option "xkb_layout" "fr"
[124959.185] (**) Option "xkb_variant" "latin9"
[124959.185] (II) config/udev: Adding input device PC Speaker (/dev/input/e vent6)
[124959.185] (II) No input driver specified, ignoring this device.
[124959.185] (II) This device may have been added with another device file.
[124959.281] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124959.281] (II) NVIDIA(GPU-0): Vision stereo.
[124959.281] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124959.281] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124959.281] (**) NVIDIA(0): been enabled on all display devices.)
[124959.281] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124959.281] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124959.281] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124959.281] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124959.281] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124959.281] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124959.281] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124959.281] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124959.281] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124959.281] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124959.281] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124959.281] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124959.282] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124959.282] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124959.282] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124959.581] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124959.581] (II) NVIDIA(GPU-0): Vision stereo.
[124959.581] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124959.581] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124959.581] (**) NVIDIA(0): been enabled on all display devices.)
[124959.581] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124959.581] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124959.582] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124959.582] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124959.582] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124959.582] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124959.582] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124959.582] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124959.582] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124959.582] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124959.582] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124959.582] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124959.582] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124959.582] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124959.582] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124968.377] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124968.377] (II) NVIDIA(GPU-0): Vision stereo.
[124968.377] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124968.377] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124968.377] (**) NVIDIA(0): been enabled on all display devices.)
[124968.377] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124968.377] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124968.377] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124968.377] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124968.377] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124968.377] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124968.377] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124968.377] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124968.377] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124968.377] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124968.377] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124968.377] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124968.377] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124968.377] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124968.377] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124968.468] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124968.468] (II) NVIDIA(GPU-0): Vision stereo.
[124968.468] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124968.468] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124968.468] (**) NVIDIA(0): been enabled on all display devices.)
[124968.468] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124968.468] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124968.468] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124968.468] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124968.468] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124968.469] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124968.469] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124968.469] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124968.469] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124968.469] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124968.469] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124968.469] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124968.469] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124968.469] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124968.469] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124969.048] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124969.048] (II) NVIDIA(GPU-0): Vision stereo.
[124969.048] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124969.048] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124969.048] (**) NVIDIA(0): been enabled on all display devices.)
[124969.049] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.049] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124969.049] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.049] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.049] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124969.049] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.049] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124969.049] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.049] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.049] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124969.049] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.049] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124969.049] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.049] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.049] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124969.122] (II) NVIDIA(0): Setting mode "DVI-I-1: 1680x1050 @1680x1050 +0 +0"
[124969.287] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124969.287] (II) NVIDIA(GPU-0): Vision stereo.
[124969.287] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124969.287] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124969.287] (**) NVIDIA(0): been enabled on all display devices.)
[124969.287] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.287] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124969.287] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.287] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.287] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124969.287] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.287] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124969.287] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.287] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.287] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124969.287] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.287] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124969.287] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.287] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.287] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124969.417] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124969.417] (II) NVIDIA(GPU-0): Vision stereo.
[124969.417] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124969.417] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124969.417] (**) NVIDIA(0): been enabled on all display devices.)
[124969.417] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.417] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124969.417] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.418] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.418] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124969.418] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.418] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124969.418] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.418] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.418] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124969.418] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.418] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124969.418] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.418] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.418] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124969.547] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124969.547] (II) NVIDIA(GPU-0): Vision stereo.
[124969.547] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124969.547] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124969.547] (**) NVIDIA(0): been enabled on all display devices.)
[124969.547] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.547] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124969.547] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.547] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.547] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124969.547] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.547] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124969.547] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.547] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.547] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124969.547] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.547] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124969.547] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.547] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.547] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124969.643] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124969.643] (II) NVIDIA(GPU-0): Vision stereo.
[124969.643] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124969.643] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124969.644] (**) NVIDIA(0): been enabled on all display devices.)
[124969.644] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.644] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124969.644] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.644] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.644] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124969.644] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.644] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124969.644] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.644] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.644] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124969.644] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124969.644] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124969.644] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124969.644] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124969.644] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124996.760] (II) NVIDIA(0): Setting mode "DFP-0:+0+0"
[124996.988] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124996.988] (II) NVIDIA(GPU-0): Vision stereo.
[124996.988] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124996.988] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124996.988] (**) NVIDIA(0): been enabled on all display devices.)
[124996.989] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124996.989] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124996.989] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124996.989] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124996.989] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124996.989] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124996.989] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124996.989] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124996.989] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124996.989] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124996.989] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124996.989] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124996.989] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124996.989] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124996.989] (WW) NVIDIA(GPU-0): check for mode "720x576".
[124997.082] (II) NVIDIA(GPU-0): Display (Samsung S24B300 (DFP-0)) does not support NVIDIA 3D
[124997.082] (II) NVIDIA(GPU-0): Vision stereo.
[124997.082] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the ED ID for display
[124997.082] (**) NVIDIA(0): device Samsung S24B300 (DFP-0) (Using EDID frequencies has
[124997.082] (**) NVIDIA(0): been enabled on all display devices.)
[124997.082] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124997.082] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[124997.082] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124997.082] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124997.082] (WW) NVIDIA(GPU-0): check for mode "1920x1080".
[124997.082] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124997.082] (WW) NVIDIA(GPU-0): "1280x720" is specified in the EDID; h owever, the EDID's
[124997.082] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124997.082] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124997.082] (WW) NVIDIA(GPU-0): check for mode "1280x720".
[124997.082] (WW) NVIDIA(GPU-0): The EDID for Samsung S24B300 (DFP-0) contr adicts itself: mode
[124997.082] (WW) NVIDIA(GPU-0): "720x576" is specified in the EDID; ho wever, the EDID's
[124997.082] (WW) NVIDIA(GPU-0): valid VertRefresh range (56.000-75.000 Hz) would exclude
[124997.082] (WW) NVIDIA(GPU-0): this mode's VertRefresh (50.0 Hz); ign oring VertRefresh
[124997.082] (WW) NVIDIA(GPU-0): check for mode "720x576".

--MP_/=jg8nfxGg6JxgMSYeqbTeVI--

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
maderios
Le #25781362
On 11/12/2013 09:58 AM, Nicolas FRANCOIS wrote:
Le Mon, 11 Nov 2013 11:24:34 +0100,
François Patte
Le 10/11/2013 20:56, Nicolas FRANCOIS a écrit :
Salut.

J'ai réglé avec nvidia-settings le mode par défaut au mode optimal
de mon écran, soit 1920*1080*60Hz. Lorsque je boote, l'écran de
connexion est dans le bon mode. Mais quand je me loggue, l'écran
s'éteint, et se rallume en 1680*1050. Et ça m'énerve...

J'ai cherché dans mon répertoire perso, et ai vu deux choses : un
fichier .nvidia-settings-rc, qui ne contient pas de résolution par
défaut, et un répertoire .nv, qui ne contient qu'un sous-répertoire
GLCache avec deux sous-répertoires aux noms idiots et des trucs
bizarres dedans.



Que se passe-t-il si on vire ces deux trucs (mv.... de façon à revenir
s'il y a un pb)?



Les virer ne change rien (ce qui est plutôt rassurant !)

Comment faire pour ne pas modifier les réglages du
fichier /etc/X11/xorg.conf ?



Que contient la section "Screen"?



Ça :

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-0"
Option "metamodes" "1920x1080_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

D'autre part, le fichier Xorg.log.0 contient des choses bizarres. Je le
joins en pièce jointe. Plein de sections qui se répètent, et UNE
mention d'un passage en 1680*1050...



Bonjour
L'utilitaire nvidia-settings permet de générer un fichier ok.
Mon xorg.conf qui marche normalement. Tu peux supprimer la 2° section
screen "screen1" si tu ne veux pas démarrer 2 sessions X en même temps:

xorg.conf pour nvidia à adapter:

# nvidia-settings: X configuration file generated by nvidia-settings
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "stylus"
Option "USB" "on" # USB ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "eraser"
Option "USB" "on" # USB ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "cursor"
Option "USB" "on" # USB ONLY
EndSection

Section "InputDevice"
Identifier "pad"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "pad"
Option "USB" "on" # USB ONLY
EndSection

Section "InputDevice"
Identifier "touch"
Driver "wacom"
Option "Device" "/dev/input/wacom" # USB ONLY
Option "Type" "touch"
Option "USB" "on" # USB ONLY
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Eizo SX2462W"
HorizSync 31.0 - 76.0
VertRefresh 59.0 - 61.0
# Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Eizo SX2462W"
HorizSync 31.0 - 76.0
VertRefresh 59.0 - 61.0
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro 600"
EndSection

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro 600"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
# Modes "1920x1200"
EndSubSection
EndSection

#FACULTATIF
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
# Modes "1920x1200"
EndSubSection
EndSection



--
Maderios


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Nicolas FRANCOIS
Le #25909892
Le Sun, 10 Nov 2013 20:56:13 +0100,
Nicolas FRANCOIS
Salut.

J'ai réglé avec nvidia-settings le mode par défaut au mode optimal de
mon écran, soit 1920*1080*60Hz. Lorsque je boote, l'écran de co nnexion
est dans le bon mode. Mais quand je me loggue, l'écran s'éteint , et se
rallume en 1680*1050. Et ça m'énerve...

J'ai cherché dans mon répertoire perso, et ai vu deux choses : un
fichier .nvidia-settings-rc, qui ne contient pas de résolution par
défaut, et un répertoire .nv, qui ne contient qu'un sous-rà ©pertoire
GLCache avec deux sous-répertoires aux noms idiots et des trucs
bizarres dedans.

Comment faire pour ne pas modifier les réglages du
fichier /etc/X11/xorg.conf ?



J'ai trouvé : dans les paramètres de XFCE, l'écran est rà ©glé sur
1680*1050, et ce paramètre était lu APRÈS le lancement de Xo rg.

J'ai remis la résolution par défaut à 1920*1080, et tout est OK
maintenant.

Fais suer, toutes ces surcouches au système de base :-( Le Linux
moderne n'est pas pour les vieux de la vieille :-P

bye

--

Nicolas FRANCOIS | /
http://nicolas.francois.free.fr | |__|
X--/\
We are the Micro$oft. __V
Resistance is futile.
You will be assimilated. darthvader penguin

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Bzzz
Le #25909882
On Fri, 3 Jan 2014 20:11:30 +0100
Nicolas FRANCOIS
Fais suer, toutes ces surcouches au système de base :-( Le Linux
moderne n'est pas pour les vieux de la vieille :-P



C'est justement parce que tu vieillis qu'il te faut une
sur-couche ;-P>>

--
Certains hommes n'ont que ce qu'ils méritent, les autres sont cél ibataires.
-- Sacha GUITRY

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Nicolas FRANCOIS
Le #25920822
Le Fri, 3 Jan 2014 20:16:02 +0100,
Bzzz
On Fri, 3 Jan 2014 20:11:30 +0100
Nicolas FRANCOIS
> Fais suer, toutes ces surcouches au système de base :-( Le Linux
> moderne n'est pas pour les vieux de la vieille :-P

C'est justement parce que tu vieillis qu'il te faut une
sur-couche ;-P>>




Ah, c'est malin !!!

bye

--

Nicolas FRANCOIS | /
http://nicolas.francois.free.fr | |__|
X--/\
We are the Micro$oft. __V
Resistance is futile.
You will be assimilated. darthvader penguin

--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists

Pour vous DESABONNER, envoyez un message avec comme objet "unsubscribe"
vers
En cas de soucis, contactez EN ANGLAIS
Archive: http://lists.debian.org/
Publicité
Poster une réponse
Anonyme