[OpenBSD-5.0-amd64 Fresh install, masterBoot record.

Le
Olivier Burelli
Bonjour all,


ayant décide de faire une reinstall complète en lieu et place des=
3
uprgrades successif et vlan patatras :)

bref Machine :

INTEL dual core E8200 4 Go

CARTE RAID : INTEL SRCS16 avec trois WD raptor en strip pour 4 disque
logiques.


je boot, selection mon sd2, je selectionne le whole disk, le formatage
se passe bien, et l'install aussi.

Mais voila, un kernel panic no DMA et paf pas damorcage installé.

Je prends une galette i386 l'installation se passe sans soucis.


Bon, est-ce mon CD-amd64 qui m'en veut ?


Merci.
Vidéos High-Tech et Jeu Vidéo
Téléchargements
Vos réponses
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
Miod Vallat
Le #24000121
Mais voila, un kernel panic no DMA et paf pas damorcage installé.



Merci pour ce rapport d'erreur précis et extrêmement détaillé.

[...]

Bon, est-ce mon CD-amd64 qui m'en veut ?



Non, il s'agit d'un bug soit dans la couche SCSI soit, plus
probablement, dans le pilote de la carte RAID. Un dmesg de
l'installation i386 serait utile afin de pouvoir corriger le problème.

En attendant, en diminuant la quantité de mémoire physique dans la
machine de façon à ce qu'il n'y ait pas de mémoire au delà de 4GB, le
problème ne pourra pas se produire.
Olivier Burelli
Le #24000151
Le Thu, 24 Nov 2011 20:43:01 +0000 (UTC),
Miod Vallat
> Mais voila, un kernel panic no DMA et paf pas damorcage installé.

Merci pour ce rapport d'erreur précis et extrêmement détai llé.





oui je sais, rien de verbeux. j'en suis dsl, je n'ais même pas eu le
temps de finir de lire le mesg d'erreur en 3 tentavives. Heureux que
OpenBSD s'installe vite :)

je n'ai donc pas eu le temps de noté quoique ce soit de plus, elle a
reboote aussi sec.


> Bon, est-ce mon CD-amd64 qui m'en veut ?

Non, il s'agit d'un bug soit dans la couche SCSI soit, plus
probablement, dans le pilote de la carte RAID. Un dmesg de
l'installation i386 serait utile afin de pouvoir corriger le problèm e.



je vais report aussi sec avec le dmesg i386. je vais reinstalle la
version amd64 et essayer de prendre une photo pour arriver a lire le
mesg complet.

En attendant, en diminuant la quantité de mémoire physique dans la
machine de façon à ce qu'il n'y ait pas de mémoire au del à de 4GB, le
problème ne pourra pas se produire.



ma machine possède 4 096 MB, je vire une barette et reteste.


Question puis je booter du CD même si l'amorce n'a pas été i nstallé
cela fonctionera pour le dmesg en amd64 ?

boot sd2a:/bsd si je me souviens bien.


merci.
Olivier Burelli
Le #24000461
Le Thu, 24 Nov 2011 20:43:01 +0000 (UTC),
Miod Vallat
> Mais voila, un kernel panic no DMA et paf pas damorcage installé.

Merci pour ce rapport d'erreur précis et extrêmement détai llé.




voici copie du mail envoyé a

thx miod.


hello,


after 3 upgrade succesfull i decided a fresh install for OpenBSD-5.0 on
my PC :

Intel E8200 dual core 2, 4GB ram.
RAID : Intel SRCS16 (ami) with 3 Western digital raptor (stripping)



i boot OpenBSD-5.0-amd64 install Cd.

installation started
[...]
Disk Setup succesfull.
[...]
fdisk and Disklabel sucessfull.
[...]
Installation media and file set succesfful.
[...]


Saving configuration files...done.
Generating initial host.random file...done.
Making all device nodes...done.


PANIC: Non dma-reachable buffer at curraddr 0x12e5e3ba0(raw)
syncing disk... 173 172 134 68 4 done


I have installed succesfully later

- OpenBSD-i386 with 4 096 MB
- OpenBSD-amd64 with 3072 MB


best regards,

Olivier.

**************************************************************************

dmesg : OpenBSD-amd64 with 4096 MB after boot cd and choose boot
sd2a:/bsd :

**************************************************************************

OpenBSD 5.0 (RAMDISK_CD) #53: Wed Aug 17 10:17:43 MDT 2011
:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 4293132288 (4094MB)
avail mem = 4167008256 (3973MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries)
bios0: vendor American Megatrends Inc. version "1004" date 02/22/2008
bios0: ASUSTeK Computer INC. P5K WS
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.91 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,T M2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 333MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins
ioapic1: misconfigured as apic 15, can't remap to apid 3
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 8 (P0P1)
acpiprt3 at acpi0: bus 7 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 4 (P0P6)
acpiprt6 at acpi0: bus 6 (PXHA)
acpiprt7 at acpi0: bus 3 (P0P7)
acpiprt8 at acpi0: bus -1 (P0P8)
acpiprt9 at acpi0: bus 2 (P0P9)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int
16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02:
apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev
0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801I HD Audio" rev 0x02 at pci0 dev 27 function 0 not
configured ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02:
msi pci2 at ppb1 bus 7
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi
pci3 at ppb2 bus 4
ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06
pci4 at ppb3 bus 6
ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, 64MB RAM
ami0: 1 channels, 0 FC loops, 4 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct
fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors
sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct
fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors
sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct
fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors
scsibus1 at ami0: 16 targets
ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi
pci6 at ppb5 bus 3
mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21,
Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: address
00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi
pci7 at ppb6 bus 2
pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured
to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2
targets cd0 at scsibus2 targ 0 lun 0: ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding;
disabled or no drives?) uhci3 at pci0 dev 29 function 0 "Intel 82801I
USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel
82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2
"Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29
function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1:
USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr
1 ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci8 at ppb7 bus 8
"VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not configured
"Intel 82801IR LPC" rev 0x02 at pci0 dev 31 function 0 not configured
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 22 for native-PCI interrupt "Intel 82801I
SMBus" rev 0x02 at pci0 dev 31 function 3 not configured pciide2 at
pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic
2 int 22 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2
at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB
revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
uhub8 at uhub6 port 2 "vendor 0x046d G15 Keyboard Hub" rev 1.10/0.20
addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 "vendor
0x046d G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub8 port 1 configuration 1 interface 1 "vendor 0x046d G15
Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhidev2 at uhub8 port 4 configuration 1 interface 0 "vendor 0x046d G15
GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report ids
uhid at uhidev2 reportid 1 not configured
uhid at uhidev2 reportid 2 not configured
uhid at uhidev2 reportid 3 not configured
uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer
Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0
uhid at uhidev3 not configured
uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer
Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1
ukbd1 at uhidev4
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
panic: Non dma-reachable buffer at curaddr 0x12e5e3ba0(raw)
syncing disks... 173 172 134 68 4
OpenBSD 5.0 (GENERIC) #53: Wed Aug 17 10:07:52 MDT 2011
:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 4293132288 (4094MB)
avail mem = 4164763648 (3971MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries)
bios0: vendor American Megatrends Inc. version "1004" date 02/22/2008
bios0: ASUSTeK Computer INC. P5K WS
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET
acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S4) UAR1(S4) EUSB(S4)
USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) GBEC(S4)
USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr
0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.98 MHz cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,T M2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 333MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins
ioapic1: misconfigured as apic 15, can't remap to apid 3
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 8 (P0P1)
acpiprt3 at acpi0: bus 7 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 4 (P0P6)
acpiprt6 at acpi0: bus 6 (PXHA)
acpiprt7 at acpi0: bus 3 (P0P7)
acpiprt8 at acpi0: bus -1 (P0P8)
acpiprt9 at acpi0: bus 2 (P0P9)
acpicpu0 at acpi0
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: PWRB
cpu0: unknown Enhanced SpeedStep CPU, msr 0x061a082006000820
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2671 MHz: speeds: 2667, 2000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int
16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02:
apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev
0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi
pci2 at ppb1 bus 7
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi
pci3 at ppb2 bus 4
ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06
pci4 at ppb3 bus 6
ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, 64MB RAM
ami0: 1 channels, 0 FC loops, 4 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct
fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors
sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct
fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors
sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct
fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors
scsibus1 at ami0: 16 targets
ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi
pci6 at ppb5 bus 3
mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21,
Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: address
00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi
pci7 at ppb6 bus 2
pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured
to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2
targets cd0 at scsibus2 targ 0 lun 0: ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding;
disabled or no drives?) uhci3 at pci0 dev 29 function 0 "Intel 82801I
USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel
82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2
"Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29
function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1:
USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr
1 ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci8 at ppb7 bus 8
"VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 22 for native-PCI interrupt ichiic0 at pci0
dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18 iic0 at
ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2:
using apic 2 int 22 for native-PCI interrupt usb2 at uhci0: USB
revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhub8 at uhub6 port 2 "Logitech G15 Keyboard Hub" rev 1.10/0.20 addr 2
uhidev0 at uhub8 port 1 configuration 1 interface 0 "Logitech G15
Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech G15
Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=1, output , feature=1
uhidev2 at uhub8 port 4 configuration 1 interface 0 "Logitech G15
GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report ids
uhid3 at uhidev2 reportid 1: input=6, output=0, feature=0
uhid4 at uhidev2 reportid 2: input=4, output=6, feature=3
uhid5 at uhidev2 reportid 3: input=0, output™1, feature=0
uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer
Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0
ums0 at uhidev3: 7 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer
Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 modifier keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd2a (c33e43edb729ece8.a) swap on sd2b dump on sd2b
WARNING: /mnt was not properly unmounted

****************************************************************************

dmesg, same Pc, i386 install with 4096 MB

****************************************************************************


OpenBSD 5.0 (GENERIC.MP) #59: Wed Aug 17 10:19:44 MDT 2011
:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz ("GenuineIntel"
686-class) 2.68 GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,T M2,SSSE3,CX16,xTPR,PDCM,SSE4.1
real mem = 3488395264 (3326MB) avail mem = 3421270016 (3262MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/22/08, BIOS32 rev. 0 @
0xf0010, SMBIOS rev. 2.4 @ 0xf06f0 (73 entries) bios0: vendor American
Megatrends Inc. version "1004" date 02/22/2008 bios0: ASUSTeK Computer
INC. P5K WS acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET
acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S4) UAR1(S4) EUSB(S4)
USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) GBEC(S4)
USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr
0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 333MHz cpu1 at mainbus0: apid 1
(application processor) cpu1: Intel(R) Core(TM)2 Duo CPU E8200 @
2.66GHz ("GenuineIntel" 686-class) 2.68 GHz cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,T M2,SSSE3,CX16,xTPR,PDCM,SSE4.1
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic1
at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins ioapic1:
misconfigured as apic 15, can't remap to apid 3 acpimcfg0 at acpi0 addr
0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 8 (P0P1)
acpiprt3 at acpi0: bus 7 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 4 (P0P6)
acpiprt6 at acpi0: bus 6 (PXHA)
acpiprt7 at acpi0: bus 3 (P0P7)
acpiprt8 at acpi0: bus -1 (P0P8)
acpiprt9 at acpi0: bus 2 (P0P9)
acpicpu0 at acpi0
acpicpu1 at acpi0
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xd200 0xcd800/0x3400 0xd1000/0x2400
cpu0: unknown Enhanced SpeedStep CPU, msr 0x061a082006000820
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2672 MHz: speeds: 2667, 2000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int
16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02:
apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev
0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2 int
17 pci2 at ppb1 bus 7
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 2 int
18 pci3 at ppb2 bus 4
ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06
pci4 at ppb3 bus 6
ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, 64MB RAM
ami0: 1 channels, 0 FC loops, 4 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct
fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors
sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct
fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors
sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct
fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors
scsibus1 at ami0: 16 targets
ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: apic 2 int
19 pci6 at ppb5 bus 3
mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21,
Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: address
00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 2 int
16 pci7 at ppb6 bus 2
pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured
to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2
targets cd0 at scsibus2 targ 0 lun 0: ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding;
disabled or no drives?) uhci3 at pci0 dev 29 function 0 "Intel 82801I
USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel
82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2
"Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29
function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1:
USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr
1 ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci8 at ppb7 bus 8
"VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM
disabled pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev
0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to
native-PCI pciide1: using apic 2 int 22 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2
int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM
non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM
non-parity PC2-6400CL5 spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM
non-parity PC2-6400CL5 spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM
non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 "Intel 82801I
SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI pciide2: using apic 2 int 22 for native-PCI interrupt usb2
at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev
1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhub8 at uhub6 port 2 "Logitech G15 Keyboard Hub" rev 1.10/0.20 addr 2
uhidev0 at uhub8 port 1 configuration 1 interface 0 "Logitech G15
Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech G15
Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=1, output , feature=1
uhidev2 at uhub8 port 4 configuration 1 interface 0 "Logitech G15
GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report ids
uhid3 at uhidev2 reportid 1: input=6, output=0, feature=0
uhid4 at uhidev2 reportid 2: input=4, output=6, feature=3
uhid5 at uhidev2 reportid 3: input=0, output™1, feature=0
uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer
Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0
ums0 at uhidev3: 7 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer
Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 modifier keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd2a (92e2252ceb7c8b90.a) swap on sd2b dump on sd2b

************************************************************************

dmesg, same Pc amd64 install with 3072 MB

************************************************************************

OpenBSD 5.0 (RAMDISK_CD) #53: Wed Aug 17 10:17:43 MDT 2011
:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 3219390464 (3070MB)
avail mem = 3121913856 (2977MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries)
bios0: vendor American Megatrends Inc. version "1004" date 02/22/2008
bios0: ASUSTeK Computer INC. P5K WS
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.98 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,T M2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 333MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins
ioapic1: misconfigured as apic 15, can't remap to apid 3
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 8 (P0P1)
acpiprt3 at acpi0: bus 7 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 4 (P0P6)
acpiprt6 at acpi0: bus 6 (PXHA)
acpiprt7 at acpi0: bus 3 (P0P7)
acpiprt8 at acpi0: bus -1 (P0P8)
acpiprt9 at acpi0: bus 2 (P0P9)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int
16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02:
apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev
0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801I HD Audio" rev 0x02 at pci0 dev 27 function 0 not
configured ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02:
msi pci2 at ppb1 bus 7
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi
pci3 at ppb2 bus 4
ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06
pci4 at ppb3 bus 6
ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, 64MB RAM
ami0: 1 channels, 0 FC loops, 4 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct
fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors
sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct
fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors
sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct
fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors
scsibus1 at ami0: 16 targets
ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi
pci6 at ppb5 bus 3
mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21,
Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: address
00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi
pci7 at ppb6 bus 2
pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured
to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2
targets cd0 at scsibus2 targ 0 lun 0: ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding;
disabled or no drives?) uhci3 at pci0 dev 29 function 0 "Intel 82801I
USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel
82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2
"Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29
function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1:
USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr
1 ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci8 at ppb7 bus 8
"VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not configured
"Intel 82801IR LPC" rev 0x02 at pci0 dev 31 function 0 not configured
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 22 for native-PCI interrupt "Intel 82801I
SMBus" rev 0x02 at pci0 dev 31 function 3 not configured pciide2 at
pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI pciide2: using apic
2 int 22 for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2
at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB
revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
uhub8 at uhub6 port 2 "vendor 0x046d G15 Keyboard Hub" rev 1.10/0.20
addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 "vendor
0x046d G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub8 port 1 configuration 1 interface 1 "vendor 0x046d G15
Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhidev2 at uhub8 port 4 configuration 1 interface 0 "vendor 0x046d G15
GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report ids
uhid at uhidev2 reportid 1 not configured
uhid at uhidev2 reportid 2 not configured
uhid at uhidev2 reportid 3 not configured
uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer
Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0
uhid at uhidev3 not configured
uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer
Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1
ukbd1 at uhidev4
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 5.0 (GENERIC.MP) #63: Wed Aug 17 10:14:30 MDT 2011
:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3219390464 (3070MB)
avail mem = 3119632384 (2975MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries)
bios0: vendor American Megatrends Inc. version "1004" date 02/22/2008
bios0: ASUSTeK Computer INC. P5K WS
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET
acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S4) UAR1(S4) EUSB(S4)
USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) GBEC(S4)
USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr
0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.95 MHz cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,T M2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at 333MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.60 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL USH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,T M2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu1: 6MB 64b/line 16-way L2 cache ioapic0 at mainbus0: apid 2 pa
0xfec00000, version 20, 24 pins ioapic1 at mainbus0: apid 3 pa
0xfec10000, version ff, 256 pins ioapic1: misconfigured as apic 15,
can't remap to apid 3 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 8 (P0P1)
acpiprt3 at acpi0: bus 7 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus 4 (P0P6)
acpiprt6 at acpi0: bus 6 (PXHA)
acpiprt7 at acpi0: bus 3 (P0P7)
acpiprt8 at acpi0: bus -1 (P0P8)
acpiprt9 at acpi0: bus 2 (P0P9)
acpicpu0 at acpi0
acpicpu1 at acpi0
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: PWRB
cpu0: unknown Enhanced SpeedStep CPU, msr 0x061a082006000820
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2671 MHz: speeds: 2667, 2000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int
16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2
int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02:
apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev
0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi
pci2 at ppb1 bus 7
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi
pci3 at ppb2 bus 4
ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06
pci4 at ppb3 bus 6
ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2
int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, 64MB RAM
ami0: 1 channels, 0 FC loops, 4 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct
fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors
sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct
fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors
sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct
fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors
scsibus1 at ami0: 16 targets
ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06
pci5 at ppb4 bus 5
ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi
pci6 at ppb5 bus 3
mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21,
Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: address
00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi
pci7 at ppb6 bus 2
pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured
to native-PCI pciide0: using apic 2 int 17 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2
targets cd0 at scsibus2 targ 0 lun 0: ATAPI 5/cdrom removable pciide0: channel 1 ignored (not responding;
disabled or no drives?) uhci3 at pci0 dev 29 function 0 "Intel 82801I
USB" rev 0x02: apic 2 int 23 uhci4 at pci0 dev 29 function 1 "Intel
82801I USB" rev 0x02: apic 2 int 19 uhci5 at pci0 dev 29 function 2
"Intel 82801I USB" rev 0x02: apic 2 int 18 ehci1 at pci0 dev 29
function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 usb1 at ehci1:
USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr
1 ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci8 at ppb7 bus 8
"VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 22 for native-PCI interrupt ichiic0 at pci0
dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18 iic0 at
ichiic0 spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem2 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide2:
using apic 2 int 22 for native-PCI interrupt usb2 at uhci0: USB
revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uhub8 at uhub6 port 2 "Logitech G15 Keyboard Hub" rev 1.10/0.20 addr 2
uhidev0 at uhub8 port 1 configuration 1 interface 0 "Logitech G15
Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech G15
Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=1, output , feature=1
uhidev2 at uhub8 port 4 configuration 1 interface 0 "Logitech G15
GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report ids
uhid3 at uhidev2 reportid 1: input=6, output=0, feature=0
uhid4 at uhidev2 reportid 2: input=4, output=6, feature=3
uhid5 at uhidev2 reportid 3: input=0, output™1, feature=0
uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer
Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0
ums0 at uhidev3: 7 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer
Copperhead Laser Mouse" rev 2.00/21.00 addr 2uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 modifier keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd2a (9c0293fac0ad6951.a) swap on sd2b dump on sd2b
Publicité
Poster une réponse
Anonyme