Bonjour,
J'ai voulu activer la 3D de ma carte NVidia Geforce 4 MX 440 sous ubuntu
dapper, et j'ai donc suvi le tutoriel présent sur le wiki
d'ubuntu.(http://doc.ubuntu-fr.org/materiel/nvidia)
Malgré plusieurs tests de configuration, diverses recherches, un essai
avec les drivers legacy, j'ai toujours le même problème qui survient :
J'arrive à me connecter en graphique environ 1 minute, et après le poste
plante. La souris bouge encore à l'écran, mais je ne peux plus rien
faire. Un CTRL+ALT+DEL ne donne rien. Je veux passer en console avec un
CTRL+ALT+F1, mais ca ne fonctionne pas non plus. Je suis obligé de
redémarrer la machine pour me sortir de là.
J'ai testé différentes configurations de xorg.conf à la main également,
mais j'ai toujours le même problème.
J'ai également des symptomes bizarres pendant la minute ou je suis
connecté : Les fenêtres laissent des "traces" derrière elles lorsque je
les déplace, un peu comme quand explorer est planté sous windows.
Le fait de remplacer simplement "nvidia" par "nv" dans xorg.conf pour
réutiliser le driver par défaut sans 3D résoud tous les problèmes, ce
n'est donc pas à proori lié aux autres périphériques.
Je ne m'en sors pas.
Je mets une copie de mon xorg.conf, si l'un de vous pouvait me filer un
petit coup de main, parce que la je sèche lamentablement.
Merci beaucoup.
Guillaume.
----------------------------------------------------------
fichier xorg.conf
----------------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 64000
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
--------------------------------------------------------
Bonjour,
J'ai voulu activer la 3D de ma carte NVidia Geforce 4 MX 440 sous ubuntu
dapper, et j'ai donc suvi le tutoriel présent sur le wiki
d'ubuntu.(http://doc.ubuntu-fr.org/materiel/nvidia)
Malgré plusieurs tests de configuration, diverses recherches, un essai
avec les drivers legacy, j'ai toujours le même problème qui survient :
J'arrive à me connecter en graphique environ 1 minute, et après le poste
plante. La souris bouge encore à l'écran, mais je ne peux plus rien
faire. Un CTRL+ALT+DEL ne donne rien. Je veux passer en console avec un
CTRL+ALT+F1, mais ca ne fonctionne pas non plus. Je suis obligé de
redémarrer la machine pour me sortir de là.
J'ai testé différentes configurations de xorg.conf à la main également,
mais j'ai toujours le même problème.
J'ai également des symptomes bizarres pendant la minute ou je suis
connecté : Les fenêtres laissent des "traces" derrière elles lorsque je
les déplace, un peu comme quand explorer est planté sous windows.
Le fait de remplacer simplement "nvidia" par "nv" dans xorg.conf pour
réutiliser le driver par défaut sans 3D résoud tous les problèmes, ce
n'est donc pas à proori lié aux autres périphériques.
Je ne m'en sors pas.
Je mets une copie de mon xorg.conf, si l'un de vous pouvait me filer un
petit coup de main, parce que la je sèche lamentablement.
Merci beaucoup.
Guillaume.
----------------------------------------------------------
fichier xorg.conf
----------------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 64000
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
--------------------------------------------------------
Bonjour,
J'ai voulu activer la 3D de ma carte NVidia Geforce 4 MX 440 sous ubuntu
dapper, et j'ai donc suvi le tutoriel présent sur le wiki
d'ubuntu.(http://doc.ubuntu-fr.org/materiel/nvidia)
Malgré plusieurs tests de configuration, diverses recherches, un essai
avec les drivers legacy, j'ai toujours le même problème qui survient :
J'arrive à me connecter en graphique environ 1 minute, et après le poste
plante. La souris bouge encore à l'écran, mais je ne peux plus rien
faire. Un CTRL+ALT+DEL ne donne rien. Je veux passer en console avec un
CTRL+ALT+F1, mais ca ne fonctionne pas non plus. Je suis obligé de
redémarrer la machine pour me sortir de là.
J'ai testé différentes configurations de xorg.conf à la main également,
mais j'ai toujours le même problème.
J'ai également des symptomes bizarres pendant la minute ou je suis
connecté : Les fenêtres laissent des "traces" derrière elles lorsque je
les déplace, un peu comme quand explorer est planté sous windows.
Le fait de remplacer simplement "nvidia" par "nv" dans xorg.conf pour
réutiliser le driver par défaut sans 3D résoud tous les problèmes, ce
n'est donc pas à proori lié aux autres périphériques.
Je ne m'en sors pas.
Je mets une copie de mon xorg.conf, si l'un de vous pouvait me filer un
petit coup de main, parce que la je sèche lamentablement.
Merci beaucoup.
Guillaume.
----------------------------------------------------------
fichier xorg.conf
----------------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 64000
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
--------------------------------------------------------
SALUT,
Peut-tu poster le fichier /var/log/Xorg.0.log STP
Merci
SALUT,
Peut-tu poster le fichier /var/log/Xorg.0.log STP
Merci
SALUT,
Peut-tu poster le fichier /var/log/Xorg.0.log STP
Merci
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
No such file or directory.
Error opening /dev/wacom : No such file or directory
Bonjour,
J'ai voulu activer la 3D de ma carte NVidia Geforce 4 MX 440 sous ubuntu
dapper, et j'ai donc suvi le tutoriel présent sur le wiki
d'ubuntu.(http://doc.ubuntu-fr.org/materiel/nvidia)
Malgré plusieurs tests de configuration, diverses recherches, un essai
avec les drivers legacy, j'ai toujours le même problème qui survient :
J'arrive à me connecter en graphique environ 1 minute, et après le poste
plante. La souris bouge encore à l'écran, mais je ne peux plus rien
faire. Un CTRL+ALT+DEL ne donne rien. Je veux passer en console avec un
CTRL+ALT+F1, mais ca ne fonctionne pas non plus. Je suis obligé de
redémarrer la machine pour me sortir de là.
J'ai testé différentes configurations de xorg.conf à la main également,
mais j'ai toujours le même problème.
J'ai également des symptomes bizarres pendant la minute ou je suis
connecté : Les fenêtres laissent des "traces" derrière elles lorsque je
les déplace, un peu comme quand explorer est planté sous windows.
Le fait de remplacer simplement "nvidia" par "nv" dans xorg.conf pour
réutiliser le driver par défaut sans 3D résoud tous les problèmes, ce
n'est donc pas à proori lié aux autres périphériques.
Je ne m'en sors pas.
Je mets une copie de mon xorg.conf, si l'un de vous pouvait me filer un
petit coup de main, parce que la je sèche lamentablement.
Merci beaucoup.
Guillaume.
----------------------------------------------------------
fichier xorg.conf
----------------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 64000
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
--------------------------------------------------------
Bonjour,
J'ai voulu activer la 3D de ma carte NVidia Geforce 4 MX 440 sous ubuntu
dapper, et j'ai donc suvi le tutoriel présent sur le wiki
d'ubuntu.(http://doc.ubuntu-fr.org/materiel/nvidia)
Malgré plusieurs tests de configuration, diverses recherches, un essai
avec les drivers legacy, j'ai toujours le même problème qui survient :
J'arrive à me connecter en graphique environ 1 minute, et après le poste
plante. La souris bouge encore à l'écran, mais je ne peux plus rien
faire. Un CTRL+ALT+DEL ne donne rien. Je veux passer en console avec un
CTRL+ALT+F1, mais ca ne fonctionne pas non plus. Je suis obligé de
redémarrer la machine pour me sortir de là.
J'ai testé différentes configurations de xorg.conf à la main également,
mais j'ai toujours le même problème.
J'ai également des symptomes bizarres pendant la minute ou je suis
connecté : Les fenêtres laissent des "traces" derrière elles lorsque je
les déplace, un peu comme quand explorer est planté sous windows.
Le fait de remplacer simplement "nvidia" par "nv" dans xorg.conf pour
réutiliser le driver par défaut sans 3D résoud tous les problèmes, ce
n'est donc pas à proori lié aux autres périphériques.
Je ne m'en sors pas.
Je mets une copie de mon xorg.conf, si l'un de vous pouvait me filer un
petit coup de main, parce que la je sèche lamentablement.
Merci beaucoup.
Guillaume.
----------------------------------------------------------
fichier xorg.conf
----------------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 64000
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
--------------------------------------------------------
Bonjour,
J'ai voulu activer la 3D de ma carte NVidia Geforce 4 MX 440 sous ubuntu
dapper, et j'ai donc suvi le tutoriel présent sur le wiki
d'ubuntu.(http://doc.ubuntu-fr.org/materiel/nvidia)
Malgré plusieurs tests de configuration, diverses recherches, un essai
avec les drivers legacy, j'ai toujours le même problème qui survient :
J'arrive à me connecter en graphique environ 1 minute, et après le poste
plante. La souris bouge encore à l'écran, mais je ne peux plus rien
faire. Un CTRL+ALT+DEL ne donne rien. Je veux passer en console avec un
CTRL+ALT+F1, mais ca ne fonctionne pas non plus. Je suis obligé de
redémarrer la machine pour me sortir de là.
J'ai testé différentes configurations de xorg.conf à la main également,
mais j'ai toujours le même problème.
J'ai également des symptomes bizarres pendant la minute ou je suis
connecté : Les fenêtres laissent des "traces" derrière elles lorsque je
les déplace, un peu comme quand explorer est planté sous windows.
Le fait de remplacer simplement "nvidia" par "nv" dans xorg.conf pour
réutiliser le driver par défaut sans 3D résoud tous les problèmes, ce
n'est donc pas à proori lié aux autres périphériques.
Je ne m'en sors pas.
Je mets une copie de mon xorg.conf, si l'un de vous pouvait me filer un
petit coup de main, parce que la je sèche lamentablement.
Merci beaucoup.
Guillaume.
----------------------------------------------------------
fichier xorg.conf
----------------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 64000
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
--------------------------------------------------------
Salut,
Comme l'a justement fait remarqué Batman, c'est dans les dernières
lignes que le problème se trouve. Le fichier périphérique '/dev/wacom'
N'EXISTE PAS !
Comme je n'ai jamais eu à faire à ce genre de matériel, je ne peut que
te conseiller de chercher sur le web (genre google.com/linux) de l'aide
sur comment configurer correctement son serveur X avec une tablette
WACOM; peut-être sur leur site y a-t-il de l'aide s'y rapportant?.
C'est de ce coté qu'est le problème et non avec NVIDIA-GLX, donc
tu peut garder ton driver nvidia.
De plus, il y a dans le noyau linux, le support pour WACOM en USB,
peut-être faut-il que tu ais (pas sûr de l'orthographe ;)) à recompiler
ton noyau en utilisant le dernier, bien sûr! (2.6.17). (et si c'est bien
ton matos).
Voici: (dans la partie USB)
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Wacom Intuos/Graphire tablet support (USB_WACOM)
Say Y here if you want to use the USB version of the Wacom Intuos
or Graphire tablet. Make sure to say Y to "Mouse support"
(CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
(CONFIG_INPUT_EVDEV) as well.
To compile this driver as a module, choose M here: the
module will be called wacom.
http://www.tldp.org et cherche avec wacom, yen a plein !!!!!!!!!!!!!!
A+
Salut,
Comme l'a justement fait remarqué Batman, c'est dans les dernières
lignes que le problème se trouve. Le fichier périphérique '/dev/wacom'
N'EXISTE PAS !
Comme je n'ai jamais eu à faire à ce genre de matériel, je ne peut que
te conseiller de chercher sur le web (genre google.com/linux) de l'aide
sur comment configurer correctement son serveur X avec une tablette
WACOM; peut-être sur leur site y a-t-il de l'aide s'y rapportant?.
C'est de ce coté qu'est le problème et non avec NVIDIA-GLX, donc
tu peut garder ton driver nvidia.
De plus, il y a dans le noyau linux, le support pour WACOM en USB,
peut-être faut-il que tu ais (pas sûr de l'orthographe ;)) à recompiler
ton noyau en utilisant le dernier, bien sûr! (2.6.17). (et si c'est bien
ton matos).
Voici: (dans la partie USB)
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Wacom Intuos/Graphire tablet support (USB_WACOM)
Say Y here if you want to use the USB version of the Wacom Intuos
or Graphire tablet. Make sure to say Y to "Mouse support"
(CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
(CONFIG_INPUT_EVDEV) as well.
To compile this driver as a module, choose M here: the
module will be called wacom.
http://www.tldp.org et cherche avec wacom, yen a plein !!!!!!!!!!!!!!
A+
Salut,
Comme l'a justement fait remarqué Batman, c'est dans les dernières
lignes que le problème se trouve. Le fichier périphérique '/dev/wacom'
N'EXISTE PAS !
Comme je n'ai jamais eu à faire à ce genre de matériel, je ne peut que
te conseiller de chercher sur le web (genre google.com/linux) de l'aide
sur comment configurer correctement son serveur X avec une tablette
WACOM; peut-être sur leur site y a-t-il de l'aide s'y rapportant?.
C'est de ce coté qu'est le problème et non avec NVIDIA-GLX, donc
tu peut garder ton driver nvidia.
De plus, il y a dans le noyau linux, le support pour WACOM en USB,
peut-être faut-il que tu ais (pas sûr de l'orthographe ;)) à recompiler
ton noyau en utilisant le dernier, bien sûr! (2.6.17). (et si c'est bien
ton matos).
Voici: (dans la partie USB)
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Wacom Intuos/Graphire tablet support (USB_WACOM)
Say Y here if you want to use the USB version of the Wacom Intuos
or Graphire tablet. Make sure to say Y to "Mouse support"
(CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
(CONFIG_INPUT_EVDEV) as well.
To compile this driver as a module, choose M here: the
module will be called wacom.
http://www.tldp.org et cherche avec wacom, yen a plein !!!!!!!!!!!!!!
A+
xorg.conf
-------------------------------------------------------
[...]
Load "glx"
[...]
fichier Xorg.log.0
--------------------------------------------------------------------
[...]
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not
found)
[...]
xorg.conf
-------------------------------------------------------
[...]
Load "glx"
[...]
fichier Xorg.log.0
--------------------------------------------------------------------
[...]
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not
found)
[...]
xorg.conf
-------------------------------------------------------
[...]
Load "glx"
[...]
fichier Xorg.log.0
--------------------------------------------------------------------
[...]
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not
found)
[...]
Bonjour,
J'ai voulu activer la 3D de ma carte NVidia Geforce 4 MX 440 sous ubuntu
dapper, et j'ai donc suvi le tutoriel présent sur le wiki
d'ubuntu.(http://doc.ubuntu-fr.org/materiel/nvidia)
Malgré plusieurs tests de configuration, diverses recherches, un essai
avec les drivers legacy, j'ai toujours le même problème qui survient :
J'arrive à me connecter en graphique environ 1 minute, et après le poste
plante. La souris bouge encore à l'écran, mais je ne peux plus rien
faire. Un CTRL+ALT+DEL ne donne rien. Je veux passer en console avec un
CTRL+ALT+F1, mais ca ne fonctionne pas non plus. Je suis obligé de
redémarrer la machine pour me sortir de là.
J'ai testé différentes configurations de xorg.conf à la main également,
mais j'ai toujours le même problème.
J'ai également des symptomes bizarres pendant la minute ou je suis
connecté : Les fenêtres laissent des "traces" derrière elles lorsque je
les déplace, un peu comme quand explorer est planté sous windows.
Le fait de remplacer simplement "nvidia" par "nv" dans xorg.conf pour
réutiliser le driver par défaut sans 3D résoud tous les problèmes, ce
n'est donc pas à proori lié aux autres périphériques.
Je ne m'en sors pas.
Je mets une copie de mon xorg.conf, si l'un de vous pouvait me filer un
petit coup de main, parce que la je sèche lamentablement.
Merci beaucoup.
Guillaume.
----------------------------------------------------------
fichier xorg.conf
----------------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 64000
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
--------------------------------------------------------
Salut
Bonjour,
J'ai voulu activer la 3D de ma carte NVidia Geforce 4 MX 440 sous ubuntu
dapper, et j'ai donc suvi le tutoriel présent sur le wiki
d'ubuntu.(http://doc.ubuntu-fr.org/materiel/nvidia)
Malgré plusieurs tests de configuration, diverses recherches, un essai
avec les drivers legacy, j'ai toujours le même problème qui survient :
J'arrive à me connecter en graphique environ 1 minute, et après le poste
plante. La souris bouge encore à l'écran, mais je ne peux plus rien
faire. Un CTRL+ALT+DEL ne donne rien. Je veux passer en console avec un
CTRL+ALT+F1, mais ca ne fonctionne pas non plus. Je suis obligé de
redémarrer la machine pour me sortir de là.
J'ai testé différentes configurations de xorg.conf à la main également,
mais j'ai toujours le même problème.
J'ai également des symptomes bizarres pendant la minute ou je suis
connecté : Les fenêtres laissent des "traces" derrière elles lorsque je
les déplace, un peu comme quand explorer est planté sous windows.
Le fait de remplacer simplement "nvidia" par "nv" dans xorg.conf pour
réutiliser le driver par défaut sans 3D résoud tous les problèmes, ce
n'est donc pas à proori lié aux autres périphériques.
Je ne m'en sors pas.
Je mets une copie de mon xorg.conf, si l'un de vous pouvait me filer un
petit coup de main, parce que la je sèche lamentablement.
Merci beaucoup.
Guillaume.
----------------------------------------------------------
fichier xorg.conf
----------------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 64000
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
--------------------------------------------------------
Salut
Bonjour,
J'ai voulu activer la 3D de ma carte NVidia Geforce 4 MX 440 sous ubuntu
dapper, et j'ai donc suvi le tutoriel présent sur le wiki
d'ubuntu.(http://doc.ubuntu-fr.org/materiel/nvidia)
Malgré plusieurs tests de configuration, diverses recherches, un essai
avec les drivers legacy, j'ai toujours le même problème qui survient :
J'arrive à me connecter en graphique environ 1 minute, et après le poste
plante. La souris bouge encore à l'écran, mais je ne peux plus rien
faire. Un CTRL+ALT+DEL ne donne rien. Je veux passer en console avec un
CTRL+ALT+F1, mais ca ne fonctionne pas non plus. Je suis obligé de
redémarrer la machine pour me sortir de là.
J'ai testé différentes configurations de xorg.conf à la main également,
mais j'ai toujours le même problème.
J'ai également des symptomes bizarres pendant la minute ou je suis
connecté : Les fenêtres laissent des "traces" derrière elles lorsque je
les déplace, un peu comme quand explorer est planté sous windows.
Le fait de remplacer simplement "nvidia" par "nv" dans xorg.conf pour
réutiliser le driver par défaut sans 3D résoud tous les problèmes, ce
n'est donc pas à proori lié aux autres périphériques.
Je ne m'en sors pas.
Je mets une copie de mon xorg.conf, si l'un de vous pouvait me filer un
petit coup de main, parce que la je sèche lamentablement.
Merci beaucoup.
Guillaume.
----------------------------------------------------------
fichier xorg.conf
----------------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Driver "nvidia"
BusID "PCI:1:0:0"
VideoRam 64000
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV17 [GeForce4 MX 440]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
--------------------------------------------------------
Salut