ADSL eci-usb B-focus mandrake 10 la merde quoi..

...a moins qu'un superutilisateur ne debloque la situation avis aux
amateurs, je me lance
j'aimerai me connecter sur mon FAI : neuf telecom
apres avoir installer le driver present sur www.flashtux.org
le patch..
apres avoir fais toutes manip nessecaire trouvé le fichier synchro
j'en suis rendu a l'etape 4/5
et la quelque chose comme " ppp* " pose visiblement problemes :


commande :

eciadsl-start


[EciAdsl 1/5] Setting up USB support...

Preliminary USB device filesystem is OK

[EciAdsl 2/5] Uploading firmware...

Warning: firmware seems to be already loaded
Check that your modem is OFF before running eciadsl-start (if modem is
powered on, then unplug/replug it)

[EciAdsl 3/5] Synchronization...

Progress indicator is 01 No Signal !
Progress indicator is a0 No Signal !
Progress indicator is 02 No Signal !
Progress indicator is 11 Training...
Progress indicator is a1 Training...
Progress indicator is a1 Training...
Progress indicator is 43 Training...
Progress indicator is a4 Training...
Progress indicator is a4 Training...
Progress indicator is 74 Training...
Progress indicator is a6 Training...
Progress indicator is 77 Training...
Progress indicator is 75 Training...
Progress indicator is aa Training...
Progress indicator is 72 Training...
Progress indicator is ad Training...
eciadsl-synch: success
Synchronization successful

[EciAdsl 4/5] Connecting to provider...

using channel 4
ioctl(PPPIOCGFLAGS): Inappropriate ioctl for device
ERROR: failed to connect



eciadsl-doctor

You are using linux kernel version 2.6.3-4mdk
Support for USB is OK
Preliminary USB device filesystem is OK
dabusb module is not loaded: OK
UHCI support is OK
OHCI support is not needed
/dev/ppp is OK
HDLC support is OK
HDLC support is OK (no bug)
You are using pppd version 2.4.1
No existing PPP connection... trying to make one (please wait)
using channel 57
ioctl(PPPIOCGFLAGS): Inappropriate ioctl for device
Cannot make a PPP connection: Fatal




MERCI D AVANCE
Cordialement
benj