anyone know if cisco catalyst 6500 with sup2/msfc2/pfc2
can support VPLS ?
because i have:
c6509-1#sh mpls l2transport vc 135 detail
Local interface: VFI Internet up
Destination address: 172.20.10.1, VC ID: 135, VC status: down
Tunnel label: not ready, LFIB entry present
Output interface: unknown, imposed label stack {}
Create time: 00:15:31, last status change time: 00:13:31
Signaling protocol: LDP, peer 172.20.10.1:0 up
MPLS VC labels: local 23, remote 24
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 0, send 0
byte totals: receive 0, send 0
packet drops: receive 0, send 0
c6506-2#sh mpls l2transport vc 135 detail
Local interface: VFI Internet up
Destination address: 172.20.10.2, VC ID: 135, VC status: down
Tunnel label: not ready, LFIB entry present
Output interface: unknown, imposed label stack {}
Create time: 00:18:41, last status change time: 00:15:26
Signaling protocol: LDP, peer 172.20.10.2:0 up
MPLS VC labels: local 24, remote 23
Group ID: local 0, remote 0
MTU: local 1500, remote 1500
Remote interface description:
Sequencing: receive disabled, send disabled
VC statistics:
packet totals: receive 0, send 0
byte totals: receive 0, send 0
packet drops: receive 0, send 0
c6506-2#sh mpls l2transport vc
Local intf Local circuit Dest address VC ID Status
------------- -------------------- --------------- ---------- ----------
VFI Internet VFI 172.20.10.2 135 DOWN
> anyone know if cisco catalyst 6500 with sup2/msfc2/pfc2 can support VPLS ?
No.
Steinar Haug, Nethelp consulting,
Lars Christensen
Mag wrote in news:49589315$0$32711$:
Hi
anyone know if cisco catalyst 6500 with sup2/msfc2/pfc2 can support VPLS ?
VPLS is not supported on the Catalyst 6500 series. You should upgrade to the 7600 series with enhanced corefacing interfaces, such as ES-cards or SIP-400/600 cards.
Regards Lars Christensen CCIE #20292
Mag <mag@laposte.net> wrote in news:49589315$0$32711$426a74cc@news.free.fr:
Hi
anyone know if cisco catalyst 6500 with sup2/msfc2/pfc2
can support VPLS ?
VPLS is not supported on the Catalyst 6500 series. You should upgrade to
the 7600 series with enhanced corefacing interfaces, such as ES-cards or
SIP-400/600 cards.
anyone know if cisco catalyst 6500 with sup2/msfc2/pfc2 can support VPLS ?
VPLS is not supported on the Catalyst 6500 series. You should upgrade to the 7600 series with enhanced corefacing interfaces, such as ES-cards or SIP-400/600 cards.