Codes d'erreur sur OSX 10.5.8

In article (Dans l'article) <55af9e14$0$3327$426a74cc@news.free.fr>,
Rafael OTERO <rafa.mip@online.fr> wrote (écrivait) :

Quelqu'un sait-il ou trouver ces codes ou au moins l'explication du
code -36.

Dans

SuperCard 4.73 Trial/Tutorial & Sample Projects/Tutorial Two - Mac OS
Error Codes/ErrorCode text files/

je retrouve Negative Codes.txt :

General System Errors (VBL Mgr, Queue, Etc.)
0 noErr 0 for success *OR*
0 smNotTruncated No truncation necessary
-1 qErr queue element not found during deletion *OR*
-1 smTruncErr Truncation indicator alone is wider than the
specified width
-2 vTypErr invalid queue element
-3 corErr core routine number out of range
-4 unimpErr unimplemented core routine
-5 SlpTypeErr invalid queue element
-8 seNoDB no debugger installed to handle debugger command
Color Manager Errors
-9 iTabPurgErr from Color2Index/ITabMatch
-10 noColMatch from Color2Index/ITabMatch
-11 qAllocErr from MakeITable
-12 tblAllocErr from MakeITable
-13 overRun from MakeITable
-14 noRoomErr from MakeITable
-15 seOutOfRange from SetEntry
-16 seProtErr from SetEntry
-17 i2CRangeErr from SetEntry
-18 gdBadDev from SetEntry
-19 reRangeErr from SetEntry
-20 seInvRequest from SetEntry
-21 seNoMemErr from SetEntry
I/O System Errors
-17 controlErr Driver can't respond to Control call
-18 statusErr Driver can't respond to Status call
-19 readErr Driver can't respond to Read call
-20 writErr Driver can't respond to Write call
-21 badUnitErr Driver ref num doesn't match unit table
-22 unitEmptyErr Driver ref num specifies NIL handle in unit table
-23 openErr Requested read/write permission doesn't match
driver's open permission, or Attempt to open RAM serial Driver failed
-24 closErr Close failed; Permission to close .MPP driver was
denied
-25 dRemovErr tried to remove an open driver
-26 dInstErr DrvrInstall couldn't find driver in resources
-27 abortErr IO call aborted by KillIO; Publisher has written
a new edition *OR*
-27 iIOAbortErr IO abort error (Printing Manager)
-28 notOpenErr Couldn't rd/wr/ctl/sts cause driver not opened
-29 unitTblFullErr Unit table has no more entries
-30 dceExtErr dce extension error
File System Errors
-33 dirFulErr Directory full
-34 dskFulErr Disk full
-35 nsvErr No such volume; volume not found
-36 ioErr I/O error (bummers)
-37 bdNamErr Bad file name; there may be no bad names in the
final system!
-38 fnOpnErr File not open
-39 eofErr End of file; no additional data in the format
-40 posErr Tried to position to before start of file (r/w)
-41 mFulErr Memory full (open) or file won't fit (load)
-42 tmfoErr too many files open
-43 fnfErr File not found; Folder not found; Edition
container not found; Target not found
-44 wPrErr Diskette is write protected; Volume is locked
through hardware
-45 fLckdErr File is locked
-45 fLckedErr Publisher writing to an edition
-46 vLckdErr Volume is locked through software
-47 fBsyErr File is busy (delete); Section doing I/O
-48 dupFNErr Duplicate filename (rename); File found instead
of folder
-49 opWrErr File already open with with write permission
-50 paramErr Error in user parameter list
-51 rfNumErr Reference number invalid
-52 gfpErr Get file position error
-53 volOffLinErr Volume is off line
-54 permErr Software lock on file; Not a subscriber
[permissions error on file open]
-55 volOnLinErr drive volume already on-line at MountVol
-56 nsDrvErr no such drive (tried to mount a bad drive num)
-57 noMacDskErr not a mac diskette (sig bytes are wrong)
-58 extFSErr External file system ‹ file system identifier is
nonzero
-59 fsRnErr file system internal error: during rename the old
entry was deleted but could not be restoredŠ
-60 badMDBErr bad master directory block
-61 wrPermErr Write permissions error; Not a publisher
Font Manager Errors
-64 fontDecError error during font declaration
-65 fontNotDeclared font not declared
-66 fontSubErr font substitution occured
Disk, Serial Ports, Clock Specific Errors
-64 lastDskErr
-64 noDriveErr drive not installed
-65 offLinErr r/w requested for an off-line drive
-66 noNybErr couldn't find 5 nybbles in 200 tries
-67 noAdrMkErr couldn't find valid addr mark
-68 dataVerErr read verify compare failed
-69 badCksmErr addr mark checksum didn't check
-70 badBtSlpErr bad addr mark bit slip nibbles
-71 noDtaMkErr couldn't find a data mark header
-72 badDCksum bad data mark checksum
-73 badDBtSlp bad data mark bit slip nibbles
-74 wrUnderrun write underrun occurred
-75 cantStepErr step handshake failed
-76 tk0BadErr track 0 detect doesn't change
-77 initIWMErr unable to initialize IWM
-78 twoSideErr tried to read 2nd side on a 1-sided drive
-79 spdAdjErr unable to correctly adjust disk speed
-80 seekErr track number wrong on address mark
-81 sectNFErr sector number never found on a track
-82 fmt1Err can't find sector 0 after track format
-83 fmt2Err can't get enough sync
-84 verErr track failed to verify
-84 firstDskErr
-85 clkRdErr unable to read same clock value twice
-86 clkWrErr time written did not verify
-87 prWrErr parameter ram written didn't read-verify
-88 prInitErr InitUtil found the parameter ram uninitialized
-89 rcvrErr SCC receiver error (framing, parity, OR)
-90 breakRecd Break received (SCC)
AppleTalk Errors
-91 ddpSktErr Error opening socket *OR*
-91 eMultiErr Invalid address or table is full
-92 ddpLenErr Data length too big *OR*
-92 eLenErr Packet too large or first entry of the write-data
structure did not contain the full 14-byte header
-93 noBridgeErr No router available [for non-local send]
-94 lapProtErr error in attaching/detaching protocol *OR*
-94 LAPProtErr Protocol handler is already attached, node¹s
protocol table is full, protocol not attached, or protocol handler
pointer was not 0
-95 excessCollsns Hardware error [excessive collisions on write]
-97 portInUse driver Open error code (port is in use)
-98 portNotCf driver Open error code (parameter RAM not
configured for this connection)
-99 memROZErr hard error in ROZ
-99 memROZError hard error in ROZ
-99 memROZWarn soft error in ROZ
Scrap Manager Errors
-100 noScrapErr No scrap exists error
-102 noTypeErr Format not available [no object of that type in
scrap]
Storage Allocator Errors
-108 memFullErr Ran out of memory [not enough room in heap zone]
-109 nilHandleErr GetHandleSize fails on baseText or
substitutionText; NIL master pointer [handle was NIL in HandleZone or
other]
-110 memAdrErr Address was odd, or out of range
-111 memWZErr Attempted to operate on a free block;
GetHandleSize fails on baseText or substitutionText [WhichZone failed
(applied to free block)]
-112 memPurErr Trying to purge a locked or non-purgeable block
-113 memAZErr Address in zone check failed
-114 memPCErr Pointer Check failed
-115 memBCErr Block Check failed
-116 memSCErr Size Check failed
-117 memLockedErr Trying to move a locked block (MoveHHi)
HFS Errors
-120 dirNFErr Directory not found
-121 tmwdoErr No free WDCB available
-122 badMovErr Move into offspring error
-123 wrgVolTypErr Not an HFS volume [wrong volume type error or
(obsolete) operation not supported for MFS]
-124 volGoneErr Server volume has been disconnected.
-125 updPixMemErr Insufficient memory to update a pixmap
-127 fsDSIntErr Internal file system error
Menu Manager Errors
-126 dsMBarNFnd System error code for MBDF not found
-127 dsHMenuFindErr Could not find HMenu's parent in MenuKey
-128 userCanceledErr User canceled an operation
HFS FileID Errors
-130 fidNotFound no file thread exists
-131 fidNotAFile directory specified
-132 fidExists file id already exists
Color Quickdraw & Color Manager Errors
-147 regionTooBigError Region too big or complex
-148 pixMapTooBigErr Pixel map record is deeper than 1 bit per
pixel [passed pixelmap is too large]
-149 notEnoughStack Not enough stack space for the necessary buffers
*OR*
-149 mfStackErr Insufficient stack
-150 cMatchErr Color2Index failed to find an index
-151 cTempMemErr Failed to allocate memory for temporary structures
-152 cNoMemErr Failed to allocate memory for structure
-153 cRangeErr Range error on colorTable request
-154 cProtectErr ColorTable entry protection violation
-155 cDevErr Invalid type of graphics device
-156 cResErr Invalid resolution for MakeITable
-157 cDepthErr Invalid pixel depth
-158 cParmErr Invalid parameter
Resource Manager Errors (other than I/O)
-185 badExtResource Extended resource has a bad format.
-186 CantDecompress Resource bent ("the bends") can't decompress a
compressed resource
-188 resourceInMemory Resource already in memory
-189 writingPastEnd Writing past end of file
-190 inputOutOfBounds Offset or count out of bounds
-192 resNotFound Resource not found
-193 resFNotFound Resource file not found
-194 addResFailed AddResource failed
-195 addRefFailed AddReference failed
-196 rmvResFailed RmveResource failed
-197 rmvRefFailed RmveReference failed
-198 resAttrErr Attribute inconsistent with operation
-199 mapReadErr Map inconsistent with operation
Sound Manager Errors
-200 noHardware Required sound hardware not available [no
hardware support for the specified synthesizer]
-201 notEnoughHardware Insufficient hardware available [no more
channels for the specified synthesizer]
-203 queueFull No room in the queue
-204 resProblem Problem loading the resource
-205 badChannel Channel is corrupt or unusable [invalid channel
queue length]
-206 badFormat Resource is corrupt or unusable [handle to 'snd
' resource was invalid]
-207 notEnoughBufferSpace Insufficient memory available
-208 badFileFormat File is corrupt or unusable, or not AIFF or
AIFF-C
-209 channel Channel is busy
-210 buffersTooSmall Buffer is too small
-211 channelNotBusy Channel not currently used
-212 noMoreRealTime Not enough CPU time available
-213 badParam A parameter is incorrect
-220 siNoSoundInHardware No sound input hardware available
-221 siBadSoundInDevice Invalid sound input device
-222 siNoBufferSpecified No buffer specified
-223 siInvalidCompression Invalid compression type
-224 siHardDiskTooSlow Hard drive too slow to record
-225 siInvalidSampleRate Invalid sample rate
-226 siInvalidSampleSize Invalid sample size
-227 siDeviceBusyErr Sound input device is busy
-228 siBadDeviceName Invalid device name
-229 siBadRefNum Invalid reference number
-230 siInputDeviceErr Input device hardware failure
-231 siUnknownInfoType Unknown type of information
-232 siUnknownQuality Unknown quality
MIDI Manager Errors
-250 midiNoClientErr no client with that ID found
-251 midiNoPortErr no port with that ID found
-252 midiTooManyPortsErr too many ports already installed in the system
-253 midiTooManyConsErr too many connections made
-254 midiVConnectErr pending virtual connection created
-255 midiVConnectMade pending virtual connection resolved
-256 midiVConnectRmvd pending virtual connection removed
-257 midiNoConErr no connection exists between specified ports
-258 midiWriteErr couldn't write to all connected ports
-259 midiNameLenErr name supplied is longer than 31 characters
-260 midiDupIDErr duplicate client ID
-261 midiInvalidCmdErr command not supported for port type
Notification Manager Error
-299 nmTypErr Invalid qType‹must be ORD(nmType)
Start Manager Errors
-290 smSDMInitErr SDM could not be initialized.
-291 smSRTInitErr Slot Resource Table could not be initialized.
-292 smPRAMInitErr Slot Resource Table could not be initialized.
-293 smPriInitErr Cards could not be initialized.
-300 smEmptySlot No card in slot
-301 smCRCFail CRC check failed for declaration data
-302 smFormatErr FHeader Format is not Apple's
-303 smRevisionErr Wrong revison level
-304 smNoDir Directory offset is Nil
-305 smLWTstBad Long Word test field <> $5A932BC7.
-306 smNosInfoArray No sInfoArray. Memory Mgr error.
-307 smResrvErr Fatal reserved error. Reserved field <> 0.
-308 smUnExBusErr Unexpected Bus Error
-309 smBLFieldBad ByteLanes field was bad.
-310 smFHBlockRdErr Error occured during _sGetFHeader.
-311 smFHBlkDispErr Error occured during _sDisposePtr (Dispose of
FHeader block).
-312 smDisposePErr _DisposePointer error
-313 smNoBoardsRsrc No Board sResource.
-314 smGetPRErr Error occured during _sGetPRAMRec (See SIMStatus).
-315 smNoBoardId No Board Id.
-316 smIntStatVErr The InitStatusV field was negative after primary
or secondary init.
-317 smIntTblVErr An error occured while trying to initialize the
Slot Resource Table.
-318 smNoJmpTbl SDM jump table could not be created.
-319 smBadBoardId BoardId was wrong, re-init the PRAM record.
-320 smBusErrTO BusError time out.
-330 smBadRefId Reference Id not found in list
-331 smBadsList Bad sResource [sList] structure: Id1<Id2<Id3 Š
format is not followed.
-332 smReservedErr Reserved field not zero
-333 smCodeRevErr Code revision is wrong
-334 smCPUErr Code revision is wrong
-335 smsPointerNil LPointer is nil {From sOffsetData. If this error
occurs, check sInfo rec for more information.}
-336 smNilsBlockErr Nil sBlock error {Dont allocate and try to use a
nil sBlock}
-337 smSlotOOBErr Slot out of bounds error
-338 smSelOOBErr Selector out of bounds error; function not
implemented
-339 smNewPErr _NewPtr error
-340 smBlkMoveErr _BlockMove error
-341 smCkStatusErr Status of slot = fail.
-342 smGetDrvrNamErr Error occured during _sGetDrvrName.
-343 smDisDrvrNamErr Error occured during _sDisDrvrName.
-344 smNoMoresRsrcs No more sResources *OR*
-344 smNoMoresResources Specified sResource data structure not found
-345 smsGetDrvrErr Error occurred during _sGetDriver.
-346 smBadsPtrErr Bad pointer was passed to sCaldSPointer function
-347 smByteLanesErr ByteLanes field in card¹s format block was
determined to be zero
-348 smOffsetErr Offset was too big (temporary, should be fixed)
-349 smNoGoodOpens No opens were successfull in the loop.
-350 smSRTOvrFlErr SRT over flow.
-351 smRecNotFnd Record not found in the SRT.
Device Manager Slot Support Errors
-360 slotNumErr invalid slot # error
-400 gcrOnMFMErr gcr format on high density media error
Edition Manager Errors
-450 editionMgrInitErr Manager not initialized or could not
load package
-451 badSectionErr Not a valid section type
-452 notRegisteredSectionErr Not registered
-454 badSubPartErr Bad edition container spec or invalid
edition container
-460 multiplePublisherWrn Already is a publisher
-461 containerNotFoundWrn Alias was not resolved
-463 notThePublisherWrn Not the publisher
SCSI Manager Errors
-470 scsiBadPBErr invalid field(s) in the parameter block
-471 scsiOverrunErr attempted to transfer too many bytes
-472 scsiTransferErr write flag conflicts with data transfer phase
-473 scsiBusTOErr bus error during transfer
-474 scsiSelectTOErr scsiSelTO exceeded (selection failed)
-475 scsiTimeOutErr scsiReqTO exceeded
-476 scsiBusResetErr the bus was reset, so your request was aborted
-477 scsiBadStatus non-zero (not "Good") status returned
-478 scsiNoStatusErr device did not go through a status phase
-479 scsiLinkFailErr linked command never executed
-489 scsiUnimpVctErr unimplemented routine was called
SysErrs used instead of inline $A9FF & $ABFF
-490 userBreak user debugger break
-491 strUserBreak user debugger break - display string on stack
-492 exUserBreak user debugger break - execute commands on stack
QuickDraw Error
-500 rgnTooBigErr Bitmap would convert into a region greater than
64 KB
Text Edit Error
-501 teScrapSizeErr scrap item too big for text edit record
O/S Error
-502 hwParamrErr bad selector for _HWPriv
Processes Errors
-600 procNotFound No eligible process with specified process
serial number
-601 memFragErr Not enough room to launch application w ith
special requirements
-602 appModeErr Memory mode is 32-bit, but application is not
32-bit clean
-603 protocolErr app made module calls in improper order
-604 hardwareConfigErr hardware configuration not correct for call
-605 appMemFullErr Partition size specified in 'SIZE' resource is
not big enough for launch
-606 appIsDaemon Application is background-only
-607 bufferIsSmall Buffer is too small
-608 noOutstandingHLE No outstanding high-level event
-609 connectionInvalid Connection is invalid
-610 noUserInteractionAllowed Attempted PostHighLevelEvent from
background and no session yet established
Memory Dispatch Errors
-620 notEnoughMemoryErr Insufficient physical memory
-621 notHeldErr Specified range of memory is not held
-622 cannotMakeContiguousErr Cannot make specified range contiguous
-623 notLockedErr Specified range of memory is not locked
-624 interruptsMaskedErr Called with interrupts masked
-625 cannotDeferErr Unable to defer additional user functions
DatabaseAccess (Pack 13) Errors
-800 rcDBNull The data item was NULL
-801 rcDBValue Data available or successfully retrieved
-802 rcDBError Error executing function
-803 rcDBBadType Next data item not of requested data type
-804 rcDBBreak Function timed out
-805 rcDBExec Query currently executing
-806 reDBBadSessID Session ID is invalid
-807 rcDBBadSessNum Invalid session number
-808 rcDBBadDDEV Couldn¹t find the specified database extension,
or error occurred in opening database extension
-809 rcDBAsyncNotSupp The database extension does not support
asynchronous calls
-810 rcDBBadAsyncPB Invalid parameter block specified
-811 rcDBNoHandler There is no handler for this data type
installed for the current application
-812 rcDBWrongVersion Wrong version number
-813 rcDBPackNotInited The InitDBPack function has not yet been called
Help Manager Errors
-850 hmHelpDisabled Help balloons are not enabled
-851 hmResNotFound ????
-852 hmMemFullErr ????
-853 hmBalloonAborted Because of constant cursor movement, the
help balloon wasn¹t displayed
-854 hmSameAsLastBalloon Menu and item are same as previous menu
and item
-855 hmHelpManagerNotInited Help menu not set up
-856 hmBadSelector ????
-857 hmSkippedBalloon No ballon content to fill in
-858 hmWrongVersion Wrong version of Help Manager resource
-859 hmUnknownHelpType Help message record contained a bad type
-860 hmCouldNotLoadPackage ????
-861 hmOperationUnsupported Bad method parameter
-862 hmNoBalloonUp No balloon showing
-863 hmCloseViewActive User using Close View won¹t let you remove
balloon
AppleTalk ‹ PPC Toolbox Errors
-900 notInitErr PPC Toolbox has not been initialized yet
-902 nameTypeErr Invalid or inappropriate locationKindSelector in
location name
-903 noPortErr Invalid port name; Unable to open port or bad
port reference number
-904 noGlobalsErr System unable to allocate memory, critical error
-905 localOnlyErr Network activity is currently disabled
-906 destPortErr Port does not exist at destination
-907 sessTableErr PPC Toolbox is unable to create a session
-908 noSessionErr Invalid session reference number
-909 badReqErr Bad parameter or invalid state for this operation
-910 portNameExistsErr Another port is already open with this name
-911 noUserNameErr User name unknown on destination machine
-912 userRejectErr Destination rejected the session request
-915 noResponseErr Unable to contact application
-916 portClosedErr The port was closed
-917 sessClosedErr The session has closed
-919 badPortNameErr PPC port record is invalid
-922 noDefaultUserErr User has not specified owner name in Sharing
Setup control panel
-923 notLoggedInErr Default user reference number does not yet exist
-924 noUserRefErr Unable to create a new user reference number
-925 networkErr An error has occurred in the network
-926 noInformErr PPCStart failed because target application did
not have an inform pending
-927 authFailErr User¹s password is wrong
-928 noUserRecErr Invalid user reference number
-930 badServiceMethodErr Service method is other than
ppcServiceRealTime
-931 badLocNameErr Location name is invalid
-932 guestNotAllowedErr Destination port requires authentication
AppleTalk - NBP Errors
-1024 nbpBuffOvr Buffer overflow in LookupName
-1025 nbpNoConfirm Name not confirmed on ConfirmName
-1026 nbpConfDiff Name confirmed at different socket
-1027 nbpDuplicate Duplicate name exists already
-1028 nbpNotFound Name not found on remove
-1029 nbpNISErr Error trying to open the NIS
ASP Errors (XPP driver)
-1066 aspBadVersNum Server cannot support this ASP version
-1067 aspBufTooSmall Buffer too small
-1068 aspNoMoreSess No more sessions on server
-1069 aspNoServers No servers at that address
-1070 aspParamErr Parameter error
-1071 aspServerBusy Server cannot open another session
-1072 aspSessClosed Session closed
-1073 aspSizeErr Command block too big
-1074 aspTooMany Too many clients (server error)
-1075 aspNoAck No ack on attention request (server err)
AppleTalk - ATP Errors
-1096 reqFailed Request to contact router failed: retry count exceeded
-1097 tooManyReqs Too many concurrent requests
-1098 tooManySkts Too many concurrent responding-sockets
-1099 badATPSkt Bad ATP-responding socket
-1100 badBuffNum Bad response buffer number specififed
-1101 noRelErr No release received
-1102 cbNotFound Control Block not found; no pending asynchronous
calls
-1103 noSendResp AddResponse issued without SendResponse
-1104 noDataArea No data area for request to MPP
-1105 reqAborted ERdCancel function called for this ERead
[SendRequest aborted by RelTCB]
Data Stream Protocol - DSP driver Errors
-1273 errOpenDenied Open request denied by recipient
-1274 errDSPQueueSize Send or receive queue is too small
-1275 errFwdReset Read terminated by forward reset
-1276 errAttention Attention message too long
-1277 errOpening Attempt to open connection failed
-1278 errState Bad connection state for this operation
-1279 errAborted Request aborted by dspRemove or dspClose function
-1280 errRefNum Bad connection reference number
HFS Errors
-1300 fidNotFound File ID not found [No file thread exists]
-1301 fidExists File id already exists
-1302 notAFileErr Specified file is a directory
-1303 diffVolErr Files on different volumes
-1304 catChangedErr Catalog has changed and CatPosition may be invalid
-1305 desktopDamagedErr The desktop database has become corrupted ‹
the Finder will fix this, but if your application is not running with
the Finder, use DTReset or DTDelete
AppleEvent Errors
-1700 errAECoercionFail Data could not be coerced to the requested
descriptor type
-1701 errAEDescNotFound Descriptor record was not found
-1702 errAECorruptData Data in an Apple event could not be read
-1703 errAEWrongDataType Wrong descriptor type
-1704 errAENotAEDesc Not a valid descriptor record
-1705 errAEBadListItem Operation involving a list item failed
-1706 errAENewerVersion Need a newer version of the Apple Event
Manager
-1707 errAENotAppleEvent Event is not an Apple event
-1708 errAEEventNotHandled Event wasn¹t handled by an Apple event
handler
-1709 errAEReplyNotValid AEResetTimer was passed an invalid reply
-1710 errAEUnknownSendMode Invalid sending mode was passed
-1711 errAEWaitCanceled User canceled out of wait loop for reply
or reciept
-1712 errAETimeout Apple event timed out
-1713 errAENoUserInteraction No user interaction allowed
-1714 errAENotASpecialFunction Wrong keyword for a special function
-1715 errAEParamMissed Handler did not get all required paramters
-1716 errAEUnknownAddressType Unknown Apple event address type
-1717 errAEHandlerNotFound No handler found for an Apple event or a
coersion
-1718 errAEReplyNotArrived Reply has not yet arrived
-1719 errAEIllegalIndex Not a valid list index
AppleTalk - ATP Errors
-3101 buf2SmallErr Packet too large for buffer; partial data returned
-3102 noMPPErr No MPP error
-3103 ckSumErr Check sum error
-3104 extractErr Extraction error
-3105 readQErr Read queue error
-3106 atpLenErr ATP length error
-3107 atpBadRsp ATP bad response error
-3108 recNotFnd Record not found
-3109 sktClosedErr Socket closed error
Print Manager w/LaserWriter
-4096 ??? No free Connect Control Blocks available
-4097 ??? Bad connection reference number
-4098 ??? Request already active
-4099 ??? Write request too big
-4100 ??? Connection just closed
-4101 ??? Printer not found, or closed
File Manager Extensions Errors
-5000 accessDenied Incorrect access for this file/folder
-5006 DenyConflict Permission/Deny mode conflicts with the current
mode in which this fork is already open
-5015 NoMoreLocks Byte range locking failure from Server
-5020 RangeNotLocked Attempt to unlock an already unlocked range
-5021 RangeOverlap Attempt to lock some of an already locked range
AFP Errors (XPP driver)
-5000 afpAccessDenied AFP Access denied
-5001 afpAuthContinue AFP Authorization continue
-5002 afpBadUAM AFP Bad UAM
-5003 afpBadVersNum AFP Bad version number
-5004 afpBitmapErr AFP Bit map error
-5005 afpCantMove AFP Can't move error
-5006 afpDenyConflict AFP Deny conflict
-5007 afpDirNotEmpty AFP Dir not empty
-5008 afpDiskFull AFP Disk full
-5009 afpEofError AFP End-of-File error
-5010 afpFileBusy AFP File busy
-5011 afpFlatVo AFP Flat volume
-5012 afpItemNotFound AFP Information not found
-5013 afpLockErr AFP Lock error
-5014 afpMiscErr AFP Misc error
-5015 afpNoMoreLocks AFP No more locks
-5016 afpNoServer AFP No server
-5017 afpObjectExists AFP Object already exists
-5018 afpObjectNotFound AFP Object not found
-5019 afpParmErr AFP Parm error
-5020 afpRangeNotLocked AFP Range not locked
-5021 afpRangeOverlap AFP Range overlap
-5022 afpSessClosed AFP Session closed
-5023 afpUserNotAuth AFP User not authorized
-5024 afpCallNotSupported AFP Call not supported
-5025 afpObjectTypeErr AFP Object type error
-5026 afpTooManyFilesOpen AFP Too many files open
-5027 afpServerGoingDown AFP Server going down
-5028 afpCantRename AFP Can't rename
-5029 afpDirNotFound AFP Directory not found
-5030 afpIconTypeError Size of new icon and one it replaces don¹t
match
-5031 afpVolLocked Volume is Read-Only
-5032 afpObjectLocked Object is M/R/D/W inhibited
SysEnvirons Errors
-5500 envNotPresent SysEnvirons trap not present - returned by glue.
-5501 envBadVers Version non-positive
-5502 envVersTooBig Version bigger than call can handle
Gestalt Errors
-5550 gestaltUnknownErr Could not obtain the response
-5551 gestaltUndefSelectorErr Undefined selector
-5552 gestaltDupSelectorErr Selector already exists
-5553 gestaltLocationErr Function not in system heap

--
Jean-Pierre Kuypers

Veuillez trouver les phrases dans leur con-
texte avant de savoit sciemment.

In article <55af9e14$0$3327$426a74cc@news.free.fr>,
Rafael OTERO <rafa.mip@online.fr> wrote:

Ça plante à cause d'une erreur -36 sur divers fichiers.

C'est une erreur de lecture générique, ça peut être le système de
fichier qui est corrompu (passer l'Utilitaire de disque) ou un secteur
défectueux.

Patrick
--
Patrick Stadelmann <Patrick.Stadelmann@unine.ch>

Le 22/07/2015 15:43, Rafael OTERO a écrit :

Bonjour à tous,

Je tente de réinstaller un vieux MacBook qui est actuellement en Mac
OS X 10.5.8.

Avant de tout virer, je tente de sauvegarder les fichiers vers un
disque externe USB.

Ça plante à cause d'une erreur -36 sur divers fichiers.

Je ne trouve plus la signification de ce code d'erreur.

Bien sûr j'ai cherche sur le WEB mais je trouve de nombreux liens
qui envoient vers Apple mais les pages en question n'existent plus (ou
on été déplacées).

Sur l'assistance Apple je ne retrouve rien !

Quelqu'un sait-il ou trouver ces codes ou au moins l'explication du
code -36.

Merci d'avance,

Cordialement

Merci à Jean-Pierre et à Patrick pour leur aide !

Je vais me garder précieusement la liste transmise par Jean-Pierre
pour le futur.


Cordialement

--

Rafael