[CUPS + HL1030] 'Comprends pas !

Le
Doug713705
Bonjour à toutes, tous,


J'essaye en vain de configurer CUPS avec mon imprimante Brother HL-1030 mais
que je passe par l'interface web de CUPS ou par la ligne de commande, le
résultat est le même :
- L'imprimante à l'air correctement installée mais impossible d'imprimer
quoique ce soit !

Pourtant :
- le fichier /etc/printcap est correct (d'après moi mais je ne suis pas une
référence)
- cupsd est bien lancé (je l'ai même arrêté/redémarré plusieurs fois)
- J'ai bien le fichier .ppd qui-va-bien fraîchement généré là-où-il-faut
/usr/share/cups/model/Brother-HL-1030-hl1250.ppd
- L'interface web m'indique que l'imprimante est correctement installée
- Le fichier de log ne me dit rien de mal même en activant le mode debug

Le symptôme exact est le suivant :
Lorsque je lance la page de test par l'intermédiaire de l'interface d'admin
web, cela m'indique que le travail est correctement exécuté. Par contre, si
je vérifie dans la liste des travaux exécuté, le travail a le statut
"abandonné". Si je relance le travail, l'erreur suivante s'affiche sur l
page web "client-error-not-possible" mais rien dans le fichier de log
(var/log/cups/error_log) !!!!

Doit y avoir une c*uille dans le potage mais laquelle ???


Pour info :

*/etc/printcap*

# This file was automatically generated by cupsd(8) from the
# /etc/cups/printers.conf file. All changes to this file
# will be lost.
HL1030-CUPS|HL1030:rm=dougwise:rp=HL1030-CUPS:


*/etc/cups/cupsd.conf*

#
# "$Id: cupsd.conf.in,v 1.13 2003/04/10 20:14:04 mike Exp $"
#
# Sample configuration file for the Common UNIX Printing System (CUPS)
# scheduler.
#
# Copyright 1997-2003 by Easy Software Products, all rights reserved.
#
# These coded instructions, statements, and computer programs are the
# property of Easy Software Products and are protected by Federal
# copyright law. Distribution and use rights are outlined in the file
# "LICENSE.txt" which should have been included with this file. If this
# file is missing or damaged please contact Easy Software Products
# at:
#
# Attn: CUPS Licensing Information
# Easy Software Products
# 44141 Airport View Drive, Suite 204
# Hollywood, Maryland 20636-3111 USA
#
# Voice: (301) 373-9603
# EMail: cups-info@cups.org
# WWW: http://www.cups.org
#

########################################################################
# #
# This is the CUPS configuration file. If you are familiar with #
# Apache or any of the other popular web servers, we've followed the #
# same format. Any configuration variable used here has the same #
# semantics as the corresponding variable in Apache. If we need #
# different functionality then a different name is used to avoid #
# confusion #
# #
########################################################################


########
######## Server Identity
########

#
# ServerName: the hostname of your server, as advertised to the world.
# By default CUPS will use the hostname of the system.
#
# To set the default server used by clients, see the client.conf file.
#

#ServerName dougwise.bourzy-lan

#
# ServerAdmin: the email address to send all complaints/problems to.
# By default CUPS will use "root@hostname".
#

ServerAdmin doug@dougwise.bourzy-lan


########
######## Server Options
########

#
# AccessLog: the access log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot. By default set to
# "/var/log/cups/access_log"
#
# You can also use the special name "syslog" to send the output to the
# syslog file or daemon.
#

AccessLog /var/log/cups/access_log

#
# Classification: the classification level of the server. If set, this
# classification is displayed on all pages, and raw printing is disabled.
# The default is the empty string.
#

#Classification classified
#Classification confidential
#Classification secret
#Classification topsecret
#Classification unclassified

#
# ClassifyOverride: whether to allow users to override the classification
# on printouts. If enabled, users can limit banner pages to before or
# after the job, and can change the classification of a job, but cannot
# completely eliminate the classification or banners.
#
# The default is off.
#

#ClassifyOverride off

#
# DataDir: the root directory for the CUPS data files.
# By default "/usr/share/cups".
#

DataDir /usr/share/cups

#
# DefaultCharset: the default character set to use. If not specified,
# defaults to "utf-8". Note that this can also be overridden in
# HTML documents
#

DefaultCharset utf-8

#
# DefaultLanguage: the default language if not specified by the browser.
# If not specified, the current locale is used.
#

DefaultLanguage fr

#
# DocumentRoot: the root directory for HTTP documents that are served.
# By default "/usr/share/doc/cups".
#

DocumentRoot /usr/share/doc/cups

#
# ErrorLog: the error log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot. By default set to
# "/var/log/cups/error_log"
#
# You can also use the special name "syslog" to send the output to the
# syslog file or daemon.
#

ErrorLog /var/log/cups/error_log

#
# FileDevice: determines whether the scheduler will allow new printers
# to be added using device URIs of the form "file:/foo/bar". The default
# is not to allow file devices due to the potential security vulnerability
# and due to the fact that file devices do not support raw printing.
#

FileDevice No


#
# FontPath: the path to locate all font files (currently only for
pstoraster)
# By default "/usr/share/cups/fonts".
#

FontPath /usr/share/cups/fonts

#
# LogLevel: controls the number of messages logged to the ErrorLog
# file and can be one of the following:
#
# debug2 Log everything.
# debug Log almost everything.
# info Log all requests and state changes.
# warn Log errors and warnings.
# error Log only errors.
# none Log nothing.
#

LogLevel debug2

#
# MaxLogSize: controls the maximum size of each log file before they are
# rotated. Defaults to 1048576 (1MB). Set to 0 to disable log rotating.
#

MaxLogSize 1048576

#
# PageLog: the page log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot. By default set to
# "/var/log/cups/page_log"
#
# You can also use the special name "syslog" to send the output to the
# syslog file or daemon.
#

PageLog /var/log/cups/page_log

#
# PreserveJobHistory: whether or not to preserve the job history after a
# job is completed, cancelled, or stopped. Default is Yes.
#

PreserveJobHistory Yes

#
# PreserveJobFiles: whether or not to preserve the job files after a
# job is completed, cancelled, or stopped. Default is No.
#

PreserveJobFiles No

#
# AutoPurgeJobs: automatically purge jobs when not needed for quotas.
# Default is No.
#

#AutoPurgeJobs No

#
# MaxCopies: maximum number of copies that a user can request. Default is
# 100.
#

MaxCopies 100

#
# MaxJobs: maximum number of jobs to keep in memory (active and completed.)
# Default is 500; the value 0 is used for no limit.
#

MaxJobs 500

#
# MaxJobsPerPrinter: maximum number of active jobs per printer. The default
# is 0 for no limit.
#

MaxJobsPerPrinter 500

#
# MaxJobsPerUser: maximum number of active jobs per user. The default
# is 0 for no limit.
#

MaxJobsPerUser 500

#
# MaxPrinterHistory: controls the maximum number of history collections
# in the printer-state-history attribute. Set to 0 to disable history
# data.
#

MaxPrinterHistory 10

#
# Printcap: the name of the printcap file. Default is /etc/printcap.
# Leave blank to disable printcap file generation.
#

Printcap /etc/printcap

#
# PrintcapFormat: the format of the printcap file, currently either
# BSD or Solaris. The default is "BSD".
#

PrintcapFormat BSD
#PrintcapFormat Solaris

#
# PrintcapGUI: the name of the GUI options panel program to associate
# with print queues under IRIX. The default is "/usr/bin/glpoptions"
# from ESP Print Pro.
#
# This option is only used under IRIX; the options panel program
# must accept the "-d printer" and "-o options" options and write
# the selected printer options back to stdout on completion.
#

#PrintcapGUI /usr/bin/glpoptions

#
# RequestRoot: the directory where request files are stored.
# By default "/var/spool/cups".
#

RequestRoot /var/spool/cups

#
# RemoteRoot: the name of the user assigned to unauthenticated accesses
# from remote systems. By default "remroot".
#

RemoteRoot remroot

#
# ServerBin: the root directory for the scheduler executables.
# By default "/usr/lib/cups".
#

ServerBin /usr/lib/cups

#
# ServerRoot: the root directory for the scheduler.
# By default "/etc/cups".
#

ServerRoot /etc/cups


########
######## Fax Support
########

#
# FaxRetryLimit: the number of times a fax job is retried.
# The default is 5 times.
#

#FaxRetryLimit 5

#
# FaxRetryInterval: the number of seconds between fax job retries.
# The default is 300 seconds/5 minutes.
#

#FaxRetryInterval 300


########
######## Encryption Support
########

#
# ServerCertificate: the file to read containing the server's certificate.
# Defaults to "/etc/cups/ssl/server.crt".
#

#ServerCertificate /etc/cups/ssl/server.crt

#
# ServerKey: the file to read containing the server's key.
# Defaults to "/etc/cups/ssl/server.key".
#

#ServerKey /etc/cups/ssl/server.key


########
######## Filter Options
########

#
# User/Group: the user and group the server runs under. Normally this
# must be lp and sys, however you can configure things for another
# user or group as needed.
#
# Note: the server must be run initially as root to support the
# default IPP port of 631. It changes users whenever an external
# program is run, or if the RunAsUser directive is specified
#

User lp
Group sys

#
# RIPCache: the amount of memory that each RIP should use to cache
# bitmaps. The value can be any real number followed by "k" for
# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles
# (1 tile = 256x256 pixels.) Defaults to "8m" (8 megabytes).
#

RIPCache 8m

#
# TempDir: the directory to put temporary files in. This directory must be
# writable by the user defined above! Defaults to "/var/spool/cups/tmp" or
# the value of the TMPDIR environment variable.
#

TempDir /var/spool/cups/tmp

#
# FilterLimit: sets the maximum cost of all job filters that can be run
# at the same time. A limit of 0 means no limit. A typical job may need
# a filter limit of at least 200; limits less than the minimum required
# by a job force a single job to be printed at any time.
#
# The default limit is 0 (unlimited).
#

FilterLimit 0

########
######## Network Options
########

#
# Ports/addresses that we listen to. The default port 631 is reserved
# for the Internet Printing Protocol (IPP) and is what we use here.
#
# You can have multiple Port/Listen lines to listen to more than one
# port or address, or to restrict access:
#
# Port 80
# Port 631
# Listen hostname
# Listen hostname:80
# Listen hostname:631
# Listen 1.2.3.4
# Listen 192.168.1.2:631
#
# NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades
# for encryption. If you want to support web-based encryption you'll
# probably need to listen on port 443 (the "https" port)
#

#Port 80
#Port 443
Port 631

#
# HostNameLookups: whether or not to do lookups on IP addresses to get a
# fully-qualified hostname. This defaults to Off for performance reasons
#

HostNameLookups On

#
# KeepAlive: whether or not to support the Keep-Alive connection
# option. Default is on.
#

KeepAlive On

#
# KeepAliveTimeout: the timeout before Keep-Alive connections are
# automatically closed. Default is 60 seconds.
#

KeepAliveTimeout 60

#
# MaxClients: controls the maximum number of simultaneous clients that
# will be handled. Defaults to 100.
#

MaxClients 100

#
# MaxClientsPerHost: controls the maximum number of simultaneous clients
that
# will be handled from a specific host. Defaults to 10 or 1/10th of the
# MaxClients setting, whichever is larger. A value of 0 specifies the
# automatic (10 or 1/10th) setting.
#

MaxClientsPerHost 10

#
# MaxRequestSize: controls the maximum size of HTTP requests and print
files.
# Set to 0 to disable this feature (defaults to 0.)
#

MaxRequestSize 0

#
# Timeout: the timeout before requests time out. Default is 300 seconds.
#

Timeout 300


########
######## Browsing Options
########

#
# Browsing: whether or not to broadcast and/or listen for CUPS printer
# information on the network. Enabled by default.
#

Browsing On

#
# BrowseProtocols: which protocols to use for browsing. Can be
# any of the following separated by whitespace and/or commas:
#
# all - Use all supported protocols.
# cups - Use the CUPS browse protocol.
# slp - Use the SLPv2 protocol.
#
# The default is "cups".
#
# NOTE: If you choose to use SLPv2, it is *strongly* recommended that
# you have at least one SLP Directory Agent (DA) on your
# network. Otherwise, browse updates can take several seconds,
# during which the scheduler will not respond to client
# requests.
#

BrowseProtocols cups

#
# BrowseAddress: specifies a broadcast address to be used. By
# default browsing information is not sent!
#
# Note: HP-UX does not properly handle broadcast unless you have a
# Class A, B, C, or D netmask (i.e. no CIDR support).
#
# Note: Using the "global" broadcast address (255.255.255.255) will
# activate a Linux demand-dial link with the default configuration.
# If you have a LAN as well as the dial-up link, use the LAN's
# broadcast address.
#
# The @LOCAL address broadcasts to all non point-to-point interfaces.
# For example, if you have a LAN and a dial-up link, @LOCAL would
# send printer updates to the LAN but not to the dial-up link.
# Similarly, the @IF(name) address sends to the named network
# interface, e.g. @IF(eth0) under Linux. Interfaces are refreshed
# automatically (no more than once every 60 seconds), so they can
# be used on dynamically-configured interfaces, e.g. PPP, 802.11, etc.
#

#BrowseAddress x.y.z.255
#BrowseAddress x.y.255.255
#BrowseAddress x.255.255.255
#BrowseAddress 255.255.255.255
BrowseAddress @LOCAL
#BrowseAddress @IF(name)

#
# BrowseShortNames: whether or not to use "short" names for remote printers
# when possible (e.g. "printer" instead of "printer@host".) Enabled by
# default.
#

BrowseShortNames Yes

#
# BrowseAllow: specifies an address mask to allow for incoming browser
# packets. The default is to allow packets from all addresses.
#
# BrowseDeny: specifies an address mask to deny for incoming browser
# packets. The default is to deny packets from no addresses.
#
# Both "BrowseAllow" and "BrowseDeny" accept the following notations for
# addresses:
#
# All
# None
# *.domain.com
# .domain.com
# host.domain.com
# nnn.*
# nnn.nnn.*
# nnn.nnn.nnn.*
# nnn.nnn.nnn.nnn
# nnn.nnn.nnn.nnn/mm
# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
# @LOCAL
# @IF(name)
#
# The hostname/domainname restrictions only work if you have turned hostname
# lookups on!
#

BrowseAllow All
#BrowseDeny All

#
# BrowseInterval: the time between browsing updates in seconds. Default
# is 30 seconds.
#
# Note that browsing information is sent whenever a printer's state changes
# as well, so this represents the maximum time between updates.
#
# Set this to 0 to disable outgoing broadcasts so your local printers are
# not advertised but you can still see printers on other hosts.
#

BrowseInterval 30

#
# BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.
#

BrowseOrder allow,deny
#BrowseOrder deny,allow

#
# BrowsePoll: poll the named server(s) for printers
#

#BrowsePoll address:port

#
# BrowsePort: the port used for UDP broadcasts. By default this is
# the IPP port; if you change this you need to do it on all servers.
# Only one BrowsePort is recognized.
#

#BrowsePort 631

#
# BrowseRelay: relay browser packets from one address/network to another.
#

#BrowseRelay source-address destination-address
#BrowseRelay @IF(src) @IF(dst)

#
# BrowseTimeout: the timeout for network printers - if we don't
# get an update within this time the printer will be removed
# from the printer list. This number definitely should not be
# less the BrowseInterval value for obvious reasons. Defaults
# to 300 seconds.
#

BrowseTimeout 300

#
# ImplicitClasses: whether or not to use implicit classes.
#
# Printer classes can be specified explicitly in the classes.conf
# file, implicitly based upon the printers available on the LAN, or
# both.
#
# When ImplicitClasses is On, printers on the LAN with the same name
# (e.g. Acme-LaserPrint-1000) will be put into a class with the same
# name. This allows you to setup multiple redundant queues on a LAN
# without a lot of administrative difficulties. If a user sends a
# job to Acme-LaserPrint-1000, the job will go to the first available
# queue.
#
# Enabled by default.
#

ImplicitClasses On

#
# ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit
# classes.
#
# When ImplicitAnyClasses is On and a local queue of the same name
# exists, e.g. "printer", "printer@server1", "printer@server1", then
# an implicit class called "Anyprinter" is created instead.
#
# When ImplicitAnyClasses is Off, implicit classes are not created
# when there is a local queue of the same name.
#
# Disabled by default.
#

ImplicitAnyCLasses Off

#
# HideImplicitMembers: whether or not to show the members of an
# implicit class.
#
# When HideImplicitMembers is On, any remote printers that are
# part of an implicit class are hidden from the user, who will
# then only see a single queue even though many queues will be
# supporting the implicit class.
#
# Enabled by default.
#

HideImplicitMembers On


########
######## Security Options
########

#
# SystemGroup: the group name for "System" (printer administration)
# access. The default varies depending on the operating system, but
# will be "sys", "system", or "root" (checked for in that order.)
#

SystemGroup root

#
# RootCertDuration: How frequently the root certificate is regenerated.
# Defaults to 300 seconds.
#

RootCertDuration 300

#
# Access permissions for each directory served by the scheduler.
# Locations are relative to DocumentRoot
#
# AuthType: the authorization to use:
#
# None - Perform no authentication
# Basic - Perform authentication using the HTTP Basic method.
# Digest - Perform authentication using the HTTP Digest method.
#
# (Note: local certificate authentication can be substituted by
# the client for Basic or Digest when connecting to the
# localhost interface)
#
# AuthClass: the authorization class; currently only "Anonymous", "User",
# "System" (valid user belonging to group SystemGroup), and "Group"
# (valid user belonging to the specified group) are supported.
#
# AuthGroupName: the group name for "Group" authorization.
#
# Order: the order of Allow/Deny processing.
#
# Allow: allows access from the specified hostname, domain, IP address,
# network, or interface.
#
# Deny: denies access from the specified hostname, domain, IP address,
# network, or interface.
#
# Both "Allow" and "Deny" accept the following notations for addresses:
#
# All
# None
# *.domain.com
# .domain.com
# host.domain.com
# nnn.*
# nnn.nnn.*
# nnn.nnn.nnn.*
# nnn.nnn.nnn.nnn
# nnn.nnn.nnn.nnn/mm
# nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
# @LOCAL
# @IF(name)
#
# The host and domain address require that you enable hostname lookups
# with "HostNameLookups On" above.
#
# The @LOCAL address allows or denies from all non point-to-point
# interfaces. For example, if you have a LAN and a dial-up link,
# @LOCAL could allow connections from the LAN but not from the dial-up
# link. Similarly, the @IF(name) address allows or denies from the
# named network interface, e.g. @IF(eth0) under Linux. Interfaces are
# refreshed automatically (no more than once every 60 seconds), so
# they can be used on dynamically-configured interfaces, e.g. PPP,
# 802.11, etc.
#
# Encryption: whether or not to use encryption; this depends on having
# the OpenSSL library linked into the CUPS library and scheduler.
#
# Possible values:
#
# Always - Always use encryption (SSL)
# Never - Never use encryption
# Required - Use TLS encryption upgrade
# IfRequested - Use encryption if the server requests it
#
# The default value is "IfRequested".
#

<Location />
Order Deny,Allow
Deny From All
Allow From 192.168.1.*
</Location>

#<Location /classes>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>

#<Location /classes/name>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>

#<Location /jobs>
#
# You may wish to limit access to job operations, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>

#<Location /printers>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>

#<Location /printers/name>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#

## Anonymous access (default)
#AuthType None

## Require a username and password (Basic authentication)
#AuthType Basic
#AuthClass User

## Require a username and password (Digest/MD5 authentication)
#AuthType Digest
#AuthClass User

## Restrict access to local domain
#Order Deny,Allow
#Deny From All
#Allow From .mydomain.com
#</Location>

<Location /admin>
#
# You definitely will want to limit access to the administration functions.
# The default configuration requires a local connection from a user who
# is a member of the system group to do any admin tasks. You can change
# the group name using the SystemGroup directive.
#

AuthType Basic
AuthClass System

## Restrict access to local domain
Order Deny,Allow
Deny From All
Allow From 127.0.0.1

#Encryption Required
</Location>

#
# End of "$Id: cupsd.conf.in,v 1.13 2003/04/10 20:14:04 mike Exp $".

Merci d'avoir lu jusque ici !!

D'avance merci pour vos réponses.

--
@+
Doug [Linux user #307925] - *Slackware* *Rulez* *;-)*
[Pourquoi t'es qui, qu'est ce que tu fais par où ?]
-- Pour me contacter enlever no-spam (2X) --

  • Partager ce contenu :
Vos réponses Page 1 / 2
Trier par : date / pertinence
Rakotomandimby Mihamina
Le #1135504
Doug713705 wrote:
Bonjour à toutes, tous,


Bonjour

J'essaye en vain de configurer CUPS avec mon imprimante Brother HL-1030 mais


USB l'imprimante ? quel modules usb sont chargés s'il te plait ?

que je passe par l'interface web de CUPS ou par la ligne de commande, le
résultat est le même :
- L'imprimante à l'air correctement installée mais impossible d'imprimer
quoique ce soit !


Quel mode d'installation de CUPS as tu utilisé ? (rpm, tar.gz, ...)
Je n'ai pas vu de mention de de la distribution utilisée.
(http://fcolc.rktmb.org/Members/mihamina/questions/redigersaquestion)

Si tu as utilisé une install par packages, liste-nous s'il te plait les
packages relatifs a CUPS, et aussi la ligne de commande que tu entre
quand tu tentes d'imprimer (verifie les permissions sur le fichier que
tu tentes d'imprimer on ne sait jamais)

--
RKTMB - http://www.rktmb.org/Members/mihamina
Tél: + 33 2 38 76 43 65 (France)
Membre d'un L.U.G. à Orléans (Université)

Doug713705
Le #1135502
Le dimanche 29 Août 2004 21:21, Rakotomandimby Mihamina s'est exprimé de la
sorte sur fr.comp.os.linux.configuration :

Doug713705 wrote:
Bonjour à toutes, tous,


Bonjour

J'essaye en vain de configurer CUPS avec mon imprimante Brother HL-1030
mais


USB l'imprimante ?


Non, quelle horreur (ça n'engage que moi)
Correctement branchée sur le port parallèle et en état normal de
fonctionnement.


Quel mode d'installation de CUPS as tu utilisé ? (rpm, tar.gz, ...)


Installé (et réinstallé au cas où) avec pkgtool (slackware)


Je n'ai pas vu de mention de de la distribution utilisée.


Slackware 10.0 / kernel 2.6.8 compilé par mes soins

Petit détail en sus :

La liste des périph' dispo :

:/home/doug# lpinfo -v
network socket
network http
network ipp
network lpd
direct canon:/dev/lp0
direct epson:/dev/lp0
direct parallel:/dev/lp0
direct scsi
serial serial:/dev/ttyS0?baud5200
serial serial:/dev/ttyS1?baud5200
serial serial:/dev/ttyS2?baud5200
serial serial:/dev/ttyS3?baud5200
serial serial:/dev/ttyS4?baud5200
serial serial:/dev/ttyS5?baud5200
serial serial:/dev/ttyS6?baud5200
serial serial:/dev/ttyS7?baud5200
serial serial:/dev/ttyS8?baud5200
serial serial:/dev/ttyS9?baud5200
serial serial:/dev/ttyS10?baud5200
serial serial:/dev/ttyS11?baud5200
serial serial:/dev/ttyS12?baud5200
serial serial:/dev/ttyS13?baud5200
serial serial:/dev/ttyS14?baud5200
serial serial:/dev/ttyS15?baud5200
serial serial:/dev/ttyS16?baud5200
serial serial:/dev/ttyS17?baud5200
serial serial:/dev/ttyS18?baud5200
serial serial:/dev/ttyS19?baud5200
serial serial:/dev/ttyS20?baud5200
serial serial:/dev/ttyS21?baud5200
serial serial:/dev/ttyS22?baud5200
serial serial:/dev/ttyS23?baud5200
serial serial:/dev/ttyS24?baud5200
serial serial:/dev/ttyS25?baud5200
serial serial:/dev/ttyS26?baud5200
serial serial:/dev/ttyS27?baud5200
serial serial:/dev/ttyS28?baud5200
serial serial:/dev/ttyS29?baud5200
serial serial:/dev/ttyS30?baud5200
serial serial:/dev/ttyS31?baud5200
direct usb:/dev/usb/lp0
direct usb:/dev/usb/lp1
direct usb:/dev/usb/lp2
direct usb:/dev/usb/lp3
direct usb:/dev/usb/lp4
direct usb:/dev/usb/lp5
direct usb:/dev/usb/lp6
direct usb:/dev/usb/lp7
direct usb:/dev/usb/lp8
direct usb:/dev/usb/lp9
direct usb:/dev/usb/lp10
direct usb:/dev/usb/lp11
direct usb:/dev/usb/lp12
direct usb:/dev/usb/lp13
direct usb:/dev/usb/lp14
direct usb:/dev/usb/lp15
network smb


(http://fcolc.rktmb.org/Members/mihamina/questions/redigersaquestion)


C'est de la pub ? ;-)


Si tu as utilisé une install par packages, liste-nous s'il te plait les
packages relatifs a CUPS,


Ben, je n'ai pas la liste en détail mais à vue de nez et d'après ce que j'en
ai compris il y a au moins :
- cups (1.1.20)
- ghostscript (7.07.1)
- gimp-print

et aussi la ligne de commande que tu entre
quand tu tentes d'imprimer


Ben aucune, vu que je passe par l'interface web pour le moment mais :
# lpr ./monfichier
ne donne rien, ni message d'erreur, ni impression !!

(verifie les permissions sur le fichier que
tu tentes d'imprimer on ne sait jamais)



Aucun problème la dessus.

Merci beaucoup.

--
@+
Doug [Linux user #307925] - *Slackware* *Rulez* *;-)*
[Pourquoi t'es qui, qu'est ce que tu fais par où ?]
-- Pour me contacter enlever no-spam (2X) --


g.patel
Le #1435087
On Sun, 29 Aug 2004 21:30:13 +0200, Doug713705

(...cups sous slackware...)
Ben aucune, vu que je passe par l'interface web pour le moment mais :
# lpr ./monfichier
ne donne rien, ni message d'erreur, ni impression !!


s'il n'y a pas de message d'erreur ni d'impression, c'est que
le fichier est resté dans la file d'attente; ce qui devrait se
vérifier en utilisant lpq (que renvoie lpq ?)

A tout hasard, que renvoie
strings /usr/bin/lpr | grep cups | wc -l
(c'est juste pour vérifier que les utilitaires sont bien ceux
de Easy Software)

Gerard Patel

Rakotomandimby Mihamina
Le #1435081
gerard patel wrote:
s'il n'y a pas de message d'erreur ni d'impression, c'est que
le fichier est resté dans la file d'attente; ce qui devrait se
vérifier en utilisant lpq (que renvoie lpq ?)


un petit coup de 'lpstat -a' aussi (j'ai oublié de demander).
--
RKTMB - http://www.rktmb.org/Members/mihamina
Tél: + 33 2 38 76 43 65 (France)
Membre d'un L.U.G. à Orléans (Université)

Doug713705
Le #1435075
Le lundi 30 Août 2004 01:55, gerard patel s'est exprimé de la sorte sur
fr.comp.os.linux.configuration :

On Sun, 29 Aug 2004 21:30:13 +0200, Doug713705

(...cups sous slackware...)
Ben aucune, vu que je passe par l'interface web pour le moment mais :
# lpr ./monfichier
ne donne rien, ni message d'erreur, ni impression !!


s'il n'y a pas de message d'erreur ni d'impression, c'est que
le fichier est resté dans la file d'attente; ce qui devrait se
vérifier en utilisant lpq (que renvoie lpq ?)



Le fichier ne reste pas dans la file d'attente, il est abandonné pour une
raison que je ne comprends pas ! Et j'ai surtout cette erreur quand
j'essaie de relancer le travail : *client-error-not-possible* et rien dans
les logs en mode debug2 !!!!!!!!!!

A tout hasard, que renvoie
strings /usr/bin/lpr | grep cups | wc -l
(c'est juste pour vérifier que les utilitaires sont bien ceux
de Easy Software)



:~$ lpstat -a
HL1030-CUPS accepting requests since Jan 01 00:00

:~$ lpq
HL1030-CUPS is ready
no entries

:~$ strings /usr/bin/lpr | grep cups | wc -l
12

:~$ strings /usr/bin/lpr | grep cups
libcups.so.2
cupsAddOption
cupsGetDest
cupsLastError
cupsGetDests
cupsSetUser
cupsSetEncryption
cupsParseOptions
cupsGetOption
cupsPrintFiles
cupsPrintFile
cupsTempFd

Un carambar électronique celui qui saura m'aiguiller.
En attendant je googlise, je googlise ...

--
@+
Doug [Linux user #307925] - *Slackware* *Rulez* *;-)*
[Pourquoi t'es qui, qu'est ce que tu fais par où ?]
-- Pour me contacter enlever no-spam (2X) --


Rakotomandimby Mihamina
Le #1435070
Doug713705 wrote:
Un carambar électronique celui qui saura m'aiguiller.
En attendant je googlise, je googlise ...


euh ... je me rappelle avoir du choisir entre lprng et cups quand
j'étais sous slackware.

regarde si lprng est installé, et enleve-le, parceque lprng et cups
c'est comme GRUB et LILO, c'est soit l'un soit l'autre.

... en tout cas, a titre personnel, j'avais ce genre d'erreur quand je
mettais sur mon systeme lprng et cups ... et je n'ai pas pu expliquer
pourquoi (j'avoue ne pas avoir cherché plus loin une fois que le truc a
fonctionné)
--
RKTMB - http://www.rktmb.org/Members/mihamina
Tél: + 33 2 38 76 43 65 (France)
Membre d'un L.U.G. à Orléans (Université)

Doug713705
Le #1435068
Le lundi 30 Août 2004 12:37, Rakotomandimby Mihamina s'est exprimé de la
sorte sur fr.comp.os.linux.configuration :

Doug713705 wrote:
Un carambar électronique celui qui saura m'aiguiller.
En attendant je googlise, je googlise ...



regarde si lprng est installé, et enleve-le, parceque lprng et cups
c'est comme GRUB et LILO, c'est soit l'un soit l'autre.



Je n'avais installé que CUPS, mais finalement je renonce, je crois qu'il
faudrait que je recompile le tout (cups+ghostscript+gimp-print). Une bonne
compilation vaudra toujours mieux que tous les packages du monde.

J'opte pour lprng, c'est dommage j'aurais bien voulu *enfin* essayer CUPS.
Décidement, je n'aurais jamais réussi à faire le tourner correctement.

Ca fait partie de ces programmes mystiques comme gnomemeeting qui
fonctionnent bien chez les autres mais qui sans raison n'ont jamais tourné
chez moi.

Merci pour le coup de main.

--
@+
Doug [Linux user #307925] - *Slackware* *Rulez* *;-)*
[Pourquoi t'es qui, qu'est ce que tu fais par où ?]
-- Pour me contacter enlever no-spam (2X) --


Rakotomandimby Mihamina
Le #1136638
Doug713705 wrote:
Je n'avais installé que CUPS,


cela ne veut pas dire que lprng est absent.

mais finalement je renonce, je crois qu'il
faudrait que je recompile le tout (cups+ghostscript+gimp-print). Une bonne
compilation vaudra toujours mieux que tous les packages du monde.


pas forcément, car le fait est que les packages existent.

J'opte pour lprng, c'est dommage j'aurais bien voulu *enfin* essayer CUPS.


OK.

Décidement, je n'aurais jamais réussi à faire le tourner correctement.


Je pense qu'avec un peu de perspicacité ça peut passer .

Ca fait partie de ces programmes mystiques comme gnomemeeting qui
fonctionnent bien chez les autres mais qui sans raison n'ont jamais tourné
chez moi.


J'ai pensé la meme chose de CUPS mais il tourne maintenant et c'est tres
bien.
--
RKTMB - http://www.rktmb.org/Members/mihamina
Tél: + 33 2 38 76 43 65 (France)
Membre d'un L.U.G. à Orléans (Université)

g.patel
Le #1136637
On Mon, 30 Aug 2004 11:10:29 +0200, Doug713705

Le fichier ne reste pas dans la file d'attente, il est abandonné pour une
raison que je ne comprends pas ! Et j'ai surtout cette erreur quand
j'essaie de relancer le travail : *client-error-not-possible* et rien dans
les logs en mode debug2 !!!!!!!!!!


rien dans le journal de Cups en mode debug2 ? Hum, il doit bien y
avoir une trace du travail, quand meme...

:~$ strings /usr/bin/lpr | grep cups | wc -l
12


c'est bien le bon programme.

Gérard Patel

Doug713705
Le #1136635
Le lundi 30 Août 2004 15:54, Rakotomandimby Mihamina s'est exprimé de la
sorte sur fr.comp.os.linux.configuration :

Doug713705 wrote:
Je n'avais installé que CUPS,


cela ne veut pas dire que lprng est absent.



Je veux dire "J'ai fait attention a n'installer *que* CUPS"
lprng était donc absent.

J'ai pensé la meme chose de CUPS mais il tourne maintenant et c'est tres
bien.


Je n'en doute pas et j'aurais aimé pouvoir dire la même chose.


--
@+
Doug [Linux user #307925] - *Slackware* *Rulez* *;-)*
[Pourquoi t'es qui, qu'est ce que tu fais par où ?]
-- Pour me contacter enlever no-spam (2X) --


Poster une réponse
Anonyme