Bonjour, je poste sur le forum car je rencontre des problemes pour installer un serveur mail correct pour gérer mes mailing lists. Je vais essayer de donner le plus d'informations possible.
Voila je ne comprend pas je ne reçoit pas d'emails, ou seulement dans certaines conditions, par exemple je m'envoi un mail avec gmail, je reçoit rien, et je fait une demande d'information en envoyant
depuis admin@MONDOMAINE.com a http://www.appmaildev.com/fr/dkim/ pour un DKIM check et je reçoit bien leurs mail de récapitulatif.
Un autre probleme, j'ai installer Mailman mais je n'arrive pas a y acceder depuis un navigateur (voir config apache ci dessous), et si je fait un alias sur / pour /usr/lib/cgi-bin/mailman/admin par exemple
il veut me faire télécharger le fichier ADMIN (dans /usr/lib/cgi-bin/mailman/ aucun fichiers n'a d'extensions php ou autre) donc inutilisable.
En gros:
- Je ne reçoit pas d'emails
- Mailman: Je n'arrive pas a acceder a lists.domain.com
- Vérification DKIM qui ne se fait pas
Debian Squeeze sur un VPS. Serveur mail Postfix, tests avec Roundcube
Les informations dans les .cfg sont remplacés par
888.888.888.888 (ip du serveur)
MONDOMAINE.com (ndd)
/etc/postfix/[B]master.cf[/B]
[CODE]#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (100)
# ==========================================================================
smtp inet n - - - - smtpd
submission inet n - - - - smtpd
-o smtpd_tls_security_level=encrypt
-o smtpd_sasl_auth_enable=yes
-o smtpd_client_restrictions=permit_sasl_authenticated,reject
-o milter_macro_daemon_name=ORIGINATING
smtps inet n - - - - smtpd
-o smtpd_tls_wrappermode=yes
-o smtpd_sasl_auth_enable=yes
-o smtpd_client_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
#628 inet n - - - - qmqpd
pickup fifo n - - 60 1 pickup
cleanup unix n - - - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - - 300 1 oqmgr
tlsmgr unix - - - 1000? 1 tlsmgr
rewrite unix - - - - - trivial-rewrite
bounce unix - - - - 0 bounce
defer unix - - - - 0 bounce
trace unix - - - - 0 bounce
verify unix - - - - 1 verify
flush unix n - - 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - - - - smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay unix - - - - - smtp
-o smtp_fallback_relay=
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - - - - showq
error unix - - - - - error
retry unix - - - - - error
discard unix - - - - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - - - - lmtp
anvil unix - - - - 1 anvil
scache unix - - - - 1 scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
# mailbox_transport = lmtp:inet:localhost
# virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus unix - n n - - pipe
# user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
# Old example of delivery via Cyrus.
#
#old-cyrus unix - n n - - pipe
# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
${nexthop} ${user}
dovecot unix - n n - - pipe
flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient}
policy unix - n n - - spawn
user=nobody argv=/usr/sbin/postfix-policyd-spf-perl
## 15/04/2013 test config
dovecot unix - n n - - pipe
flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient}
[/CODE]
/etc/postfix/[B]main.cf[/B]
[CODE]#milter See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname
smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no
# appending .domain is the MUA's job.
append_dot_mydomain = no
# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h
Petit test d'envoi sur Gmail..
[CODE]
Delivered-To: MOI@gmail.com
Received: by 10.223.203.7 with SMTP id fg7csp139898fab;
Tue, 16 Apr 2013 07:41:06 -0700 (PDT)
X-Received: by 10.180.77.226 with SMTP id v2mr19441865wiw.33.1366123263070;
Tue, 16 Apr 2013 07:41:03 -0700 (PDT)
Return-Path: <admin@MONDOMAINE.com>
Received: from MONDOMAINE.com (MONDOMAINE.com. [888.888.888.888])
by mx.google.com with ESMTP id et1si4525544wic.15.2013.04.16.07.41.02;
Tue, 16 Apr 2013 07:41:03 -0700 (PDT)
Received-SPF: pass (google.com: domain of admin@MONDOMAINE.com designates 888.888.888.888 as permitted sender) client-ip=888.888.888.888;
Authentication-Results: mx.google.com;
spf=pass (google.com: domain of admin@MONDOMAINE.com designates 888.888.888.888 as permitted sender) smtp.mail=admin@MONDOMAINE.com;
dkim=neutral (bad format) header.i=@MONDOMAINE.com
Received: by MONDOMAINE.com (Postfix, from userid 33)
id 7F39A1EE20BF; Tue, 16 Apr 2013 16:41:02 +0200 (CEST)
DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=MONDOMAINE.com;
s=default.private; t=1366123262;
bh=g3zLYH4xKxcPrHOD18z9YfpQcnk/GaJedfustWU5uGs=;
h=To:Subject:MIME-Version:Content-Type:Content-Transfer-Encoding:
Date:From:Message-ID;
b=WJim345sN03xkgi802s14GLgxBS60YwhgOThF9WMyMiQhIjkCxQepTCHqBDGOIfLX
mUXhr+mp3LxBufeZROo6kcHjsLZgTVXX9EdFM1H5Z2Mw/LupF0/TENf4z36633GNh1
BgbkJUl5Ju5asTCtzvT7pCgqqZfKhDUTs276N2mY=
To: <MOI@gmail.com>
Subject: Coucou
X-PHP-Originating-Script: 0:func.inc
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Date: Tue, 16 Apr 2013 16:41:02 +0200
From: <admin@MONDOMAINE.com>
Message-ID: <1b62767eb404b98d9c66a520084f4ad1@MONDOMAINE.com>
X-Sender: admin@MONDOMAINE.com
User-Agent: RoundCube Webmail/0.3.1
test[/CODE]
/etc/[B]dkim-filter.conf[/B] (Syslog, UMask et KeyList non commentés)
[CODE]# Log to syslog
Syslog yes
# Required to use local socket with MTAs that access the socket as a non-
# privileged user (e.g. Postfix)
UMask 002
# Sign for example.com with key in /etc/mail/dkim.key using
# selector '2007' (e.g. 2007._domainkey.example.com)
#Domain example.com
#KeyFile /etc/mail/dkim.key
#Selector 2007
# Common settings. See dkim-filter.conf(5) for more information.
#AutoRestart no
#Background yes
#Canonicalization simple
#DNSTimeout 5
#Mode sv
#SignatureAlgorithm rsa-sha256
#SubDomains no
#ADSPDiscard no
#Version rfc4871
#X-Header no
###############################################
# Other (less-standard) configuration options #
###############################################
#
# If enabled, log verification stats here
#Statistics /var/run/dkim-filter/dkim-stats
#
# KeyList is a file containing tuples of key information. Requires
# KeyFile to be unset. Each line of the file should be of the format:
# sender glob:signing domain:signing key file
# Blank lines and lines beginning with # are ignored. Selector will be
# derived from the key's filename.
KeyList /etc/dkim-keys.conf
#
# If enabled, will generate verification failure reports for any messages
# that fail signature verification. These will be sent to the r= address
# in the policy record, if any.
#SendReports yes
#
# If enabled, will issue a Sendmail QUARANTINE for any messages that fail
# signature verification, allowing them to be inspected later.
#Quarantine yes
#
# If enabled, will check for required headers when processing messages.
# At a minimum, that means From: and Date: will be required. Messages not
# containing the required headers will not be signed or verified, but will
# be passed through
#RequiredHeaders yes
[/CODE]
/etc/apache2/[B]apache2.conf[/B]
[CODE]#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "foo.log"
# with ServerRoot set to "/etc/apache2" will be interpreted by the
# server as "/etc/apache2/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"
#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
LockFile ${APACHE_LOCK_DIR}/accept.lock
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}
#
# Timeout: The number of seconds before receives and sends time out.
#
TimeOut 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive on
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
StartServers 1
MinSpareServers 1
MaxSpareServers 5
ServerLimit 500
MaxClients 400
MaxRequestsPerChild 0
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadLimit: ThreadsPerChild can be changed to this maximum value during a
# graceful restart. ThreadLimit can only be changed by stopping
# and starting Apache.
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
StartServers 1
MinSpareThreads 1
MaxSpareThreads 4
ThreadLimit 64
ThreadsPerChild 25
MaxClients 10
MaxRequestsPerChild 0
</IfModule>
# event MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_event_module>
StartServers 1
MaxClients 10
MinSpareThreads 1
MaxSpareThreads 4
ThreadLimit 64
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}
#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^.ht">
Order allow,deny
Deny from all
Satisfy all
</Files>
#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel error
# Include module configuration:
Include mods-enabled/*.load
Include mods-enabled/*.conf
# Include all the user configurations:
Include httpd.conf
# Include ports listing
Include ports.conf
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t "%r" %>s %O "%{Referer}i" "%{User-Agent}i"" vhost_combined
LogFormat "%h %l %u %t "%r" %>s %O "%{Referer}i" "%{User-Agent}i"" combined
LogFormat "%h %l %u %t "%r" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.
# Include generic snippets of statements
Include conf.d/
# Include the virtual host configurations:
Include sites-enabled/
[/CODE]
# Copyright (C) 1998,1999,2000 by the Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301 USA
"""This is the module which takes your site-specific settings.
From a raw distribution it should be copied to mm_cfg.py. If you
already have an mm_cfg.py, be careful to add in only the new settings
you want. The complete set of distributed defaults, with annotation,
are in ./Defaults. In mm_cfg, override only those you want to
change, after the
from Defaults import *
line (see below).
Note that these are just default settings - many can be overridden via the
admin and user interfaces on a per-list or per-user basis.
Note also that some of the settings are resolved against the active list
setting by using the value as a format string against the
list-instance-object's dictionary - see the distributed value of
DEFAULT_MSG_FOOTER for an example."""
#######################################################
# Here's where we get the distributed defaults. #
from Defaults import *
##############################################################
# Put YOUR site-specific configuration below, in mm_cfg.py . #
# See Defaults.py for explanations of the values. #
#-------------------------------------------------------------
# The name of the list Mailman uses to send password reminders
# and similar. Don't change if you want mailman-owner to be
# a valid local part.
MAILMAN_SITE_LIST = 'mailman'
#-------------------------------------------------------------
# If you change these, you have to configure your http server
# accordingly (Alias and ScriptAlias directives in most httpds)
DEFAULT_URL_PATTERN = 'http://%s/'
PRIVATE_ARCHIVE_URL = '/cgi-bin/mailman/private'
IMAGE_LOGOS = '/images/mailman/'
#-------------------------------------------------------------
# Default domain for email addresses of newly created MLs
DEFAULT_EMAIL_HOST = 'lists.MONDOMAINE.com'
#-------------------------------------------------------------
# Default host for web interface of newly created MLs
DEFAULT_URL_HOST = 'lists.MONDOMAINE.com'
#-------------------------------------------------------------
# Required when setting any of its arguments.
add_virtualhost(DEFAULT_URL_HOST, DEFAULT_EMAIL_HOST)
#-------------------------------------------------------------
# The default language for this server.
DEFAULT_SERVER_LANGUAGE = 'fr'
#-------------------------------------------------------------
# Iirc this was used in pre 2.1, leave it for now
USE_ENVELOPE_SENDER = 0 # Still used?
#-------------------------------------------------------------
# Unset send_reminders on newly created lists
DEFAULT_SEND_REMINDERS = 0
#-------------------------------------------------------------
# Uncomment this if you configured your MTA such that it
# automatically recognizes newly created lists.
# (see /usr/share/doc/mailman/README.Exim4.Debian or
# /usr/share/mailman/postfix-to-mailman.py)
# MTA=None # Misnomer, suppresses alias output on newlist
#-------------------------------------------------------------
# Uncomment if you use Postfix virtual domains (but not
# postfix-to-mailman.py), but be sure to see
# /usr/share/doc/mailman/README.Debian first.
# MTA='Postfix'
#-------------------------------------------------------------
# Uncomment if you want to filter mail with SpamAssassin. For
# more information please visit this website:
# http://www.jamesh.id.au/articles/mailman-spamassassin/
# GLOBAL_PIPELINE.insert(1, 'SpamAssassin')
# Note - if you're looking for something that is imported from mm_cfg, but you
# didn't find it above, it's probably in /usr/lib/mailman/Mailman/Defaults.py.
[/CODE]
# $URL: svn+bsb://svn.winnegan.de/svn/adm/trunk/mailman/postfix-to-mailman.py $
# $Id: postfix-to-mailman.py 38 2004-04-15 19:11:32Z bsb $
#
# Interface mailman to a postfix with a mailman transport. Does not require
# the creation of _any_ aliases to connect lists to your mail system.
#
# Dax Kelson, dkelson@gurulabs.com, Sept 2002.
# coverted from qmail to postfix interface
# Jan 2003: Fixes for Mailman 2.1
# Thanks to Simen E. Sandberg <senilix@gallerbyen.net>
# Feb 2003: Change the suggested postfix transport to support VERP
# Thanks to Henrique de Moraes Holschuh <henrique.holschuh@ima.sp.gov.br>
#
# Mar 2004: Siggy Brentrup <bsb@debian.org>
# downloaded from http://www.gurulabs.com/files/postfix-to-mailman-2.1.py
# and adopted for inclusion in the Debian Mailman package.
# (hi Bruce, back to the roots :-)
# rewritten for python >= 2.2 taking configuration from mm_cfg
#
# This script was originally qmail-to-mailman.py by:
# Bruce Perens, bruce@perens.com, March 1999.
# This is free software under the GNU General Public License.
# This script is meant to be called as a postfix transport pipe.
# It catches all mail to a virtual domain, eg "lists.example.com". It
# looks at the recipient for each mail message and decides if the mail
# is addressed to a valid list or not, and optionally bounces the
# message with a helpful suggestion if it's not addressed to a
# list. It decides if it is a posting, a list command, or mail to the
# list administrator, by checking for the -admin, -owner, -request,
# -join, -leave, -subscribe and -unsubscribe addresses. It will
# recognize a list as soon as the list is created, there is no need to
# add _any_ aliases for any list. It recognizes mail to postmaster,
# abuse and mailer-daemon, and routes those mails to DEB_LISTMASTER as
# defined in mm_cfg.py
# INSTALLATION:
#
# Install this file as /var/lib/mailman/bin/postfix-to-mailman.py
#
# To configure a virtual domain to connect to mailman, edit Postfix thusly:
#
# /etc/postfix/main.cf:
# relay_domains = ... lists.example.com
# relay_recipient_maps = ... hash:/var/lib/mailman/data/virtual-mailman
# transport_maps = hash:/etc/postfix/transport
# mailman_destination_recipient_limit = 1
#
# /etc/postfix/master.cf
# mailman unix - n n - - pipe
# flags=FR user=list
# argv=/var/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user}
#
# /etc/postfix/transport:
# lists.example.com mailman:
#
# /etc/mailman/mm_cfg.py
# MTA = Postfix # So that mailman generates the recipients table
# POSTFIX_STYLE_VIRTUAL_DOMAINS = ['lists.example.com']
# # alias for postmaster, abuse and mailer-daemon
# DEB_LISTMASTER = 'postmaster@example.com'
#
# Replace lists.example.com above with the name of the domain to be
# connected to Mailman. Note that _all_ mail to that domain will go to
# Mailman, so you don't want to put the name of your main domain
# here. Typically a virtual domain lists.domain.com is used for
# Mailman, and domain.com for regular email.
#
# The recipient map allows Postfix to know which addresses exists.
# Thus, if someone tries to send a (spam?) message to an undefined
# address in the domain connected to Mailman, Postfix will just refuse
# it instead of sending a (backscatter?) bounce.
#
# When you are done, restart Postfix, and run /usr/lib/mailman/bin/genaliases
# to generate the initial recipient map for the existing mailing-lists.
try:
domain, local = [ a.lower() for a in sys.argv[1:] ]
except:
# This might happen if we're not using Postfix or
# /etc/postfix/master.cf is badly misconfigured
sys.stderr.write('Illegal invocation: %rn'
% ' '.join(sys.argv))
if len(sys.argv) > 3:
sys.stderr.write('Did you forget to set '
'mailman_destination_recipient_limit=1 '
'in main.cf?')
sys.exit(EX_USAGE)
# Redirect required addresses to
if local in ('postmaster', 'abuse', 'mailer-daemon'):
os.execv("/usr/sbin/sendmail",
("/usr/sbin/sendmail", MailmanOwner))
sys.exit(0)
# Assume normal posting to a mailing list
mlist, func = local, 'post'
# Let Mailman decide if a list exists.
from Mailman.Utils import list_exists
if list_exists(mlist):
mm_pgm = os.path.join(paths.prefix, 'mail', 'mailman')
os.execv(mm_pgm, (mm_pgm, func, mlist))
# NOT REACHED
# Check for control extension on local part
for ext in ('-admin',
'-owner',
'-request',
'-bounces',
'-confirm',
'-join',
'-leave',
'-subscribe',
'-unsubscribe',
):
if local.endswith(ext):
mlist = local[:-len(ext)]
func = ext[1:]
break
if list_exists(mlist):
mm_pgm = os.path.join(paths.prefix, 'mail', 'mailman')
os.execv(mm_pgm, (mm_pgm, func, mlist))
# NOT REACHED
else:
try:
sys.stderr.write(mm_cfg.DEB_HELP_TEXT)
except AttributeError:
sys.exit(EX_NOUSER)
Test DKIM
[CODE]This email is an automatic response from AdminSystem DKIM verifier service (1.0.0.5).
The service allows email senders to perform a simple check of SPF, DKIM and DomainKeys.
It is provided free of charge, in the hope that it is useful to the email community.
We welcome any feedback you may have at <support@emailarchitect.net>.
Thank you for using the service.
AdminSystem Software Limited
SPF Record: MONDOMAINE.com
IN TXT = "v=spf1 a mx a:MONDOMAINE.com ptr:ovh.com ~all"
---SPF Trace Log---
Start to check SPF record
Sender IP:888.888.888.888
Sender Domain:MONDOMAINE.com
Parse Sender-IP 888.888.888.888
Query TEXT record from DNS server for: MONDOMAINE.com
[TXT]: v=spf1 a mx a:MONDOMAINE.com ptr:ovh.com ~all
[TXT]: k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQCaKbWZ64fNKMQZdJIPQ/ThDLC96yHSLrYLkKuAs8KqrkJzVti+2rcfSuYA1AEevpV0W2EnkkD+Jf8AkPHM4t0Ved5A25T26NFiWKPfTZogydkdDAH5aQv8pqNpySEy38WQuQ3zst0aNv4I+I7uEntXm0ZZFy3pjyw1O8M5+xjtwQIDAQAB
Parsing SPF record: v=spf1 a mx a:MONDOMAINE.com ptr:ovh.com ~all
Mechanisms: v=spf1
Mechanisms: a
Testing mechanism a
Query A record from DNS server for: MONDOMAINE.com
[A]: 888.888.888.888
Testing CIDR: source=888.888.888.888; 888.888.888.888/128
a hit, Qualifier: +
============================================================
DomainKey result: none (no signature)
============================================================
============================================================
DKIM result: permerror (no key)
============================================================
Signed by: admin@MONDOMAINE.com
Expected Body Hash: g3zLYH4xKxcPrHOD18z9YfpQcnk/GaJedfustWU5uGs=
---Original Message Header---
x-sender: admin@MONDOMAINE.com
x-receiver: AAAA3QcEEAoA@appmaildev.com
Received: from MONDOMAINE.com ([888.888.888.888]) by mail.appmaildev.com with Microsoft SMTPSVC(7.5.7600.16385);
Tue, 16 Apr 2013 11:10:17 -0400
Received: by MONDOMAINE.com (Postfix, from userid 33)
id D12621EE20BF; Tue, 16 Apr 2013 17:10:16 +0200 (CEST)
DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=MONDOMAINE.com;
s=default.private; t=1366125016;
bh=g3zLYH4xKxcPrHOD18z9YfpQcnk/GaJedfustWU5uGs=;
h=To:Subject:MIME-Version:Content-Type:Content-Transfer-Encoding:
Date:From:Message-ID;
b=aAzgyTuMZ4vj6B3mAikR8rFHRGhhGHKUEn1m6pp1WRey3iMRUb20eZi1it/U26eBc
Ce5u0oL2QfzcdLpzHJRyUmkQ8GAYROlx6Il9J2F15/h9dM2NS05ltavXunzq9e1o47
zUWU97aS80O6V24Ha4sVKyIbXFOk2Yuv9W+ZaSKg=
To: <AAAA3QcEEAoA@appmaildev.com>
Subject: test
X-PHP-Originating-Script: 0:func.inc
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Date: Tue, 16 Apr 2013 17:10:16 +0200
From: <admin@MONDOMAINE.com>
Message-ID: <04369bdc4281aabc6875d96b5045fba9@MONDOMAINE.com>
X-Sender: admin@MONDOMAINE.com
User-Agent: RoundCube Webmail/0.3.1
Return-Path: admin@MONDOMAINE.com
X-OriginalArrivalTime: 16 Apr 2013 15:10:17.0795 (UTC) FILETIME=[8149E130:01CE3AB4][/CODE]
