Disque SATA absent

Bonjour et bonne annee,

J'ai opte pour la version openSuSE 10.2 car je n'avais pas la possibilite
de visualiser mes partitions SATA, or j'ai force un peu la donne et je me
retrouve avec un disque dur SATA 400 Go reconnu sur deux, le second etant
de 500 Go, que j'ai nomme "400 Gb" et "500 Gb", il y a un maitre et un
esclave, le 500 Gb etant l'esclave, or, a la vue de mon "dmesg", je
n'arrive pas a comprendre, en effet, tout est bien detecte mais
malheureusement pas de second SATA, j'ai dans le fstab mis huit lignes :

/dev/hdc2 / reiserfs acl,user_xattr 1 1
/dev/hdc3 /home reiserfs acl,user_xattr 1 2
/dev/hda1 /windows/C ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/hda5 /windows/D ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/hda6 /windows/E ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/hda7 /windows/F ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/hdc1 swap swap defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
/dev/fd0 /media/floppy auto noauto,user,sync 0 0
/dev/sda1 /windows/sda1 ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/sda2 /windows/sda2 ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/sda3 /windows/sda3 ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/sda4 /windows/sda4 ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/sda5 /windows/sda5 ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/sda6 /windows/sda6 ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/sda7 /windows/sda7 ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
/dev/sda8 /windows/sda8 ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0

Mais seul les sda1-4 sont reconnus, donc, je suis un peu deboussole et
neophyte en la matiere, si quelqu'un pouvait me mettre sur la voie je lui
en serais reconnaissant !

Voila mon dmesg (desole pour la longueur :-( ) :

Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820:
000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820:
00000000000e0000 - 0000000000100000 (reserved) BIOS-e820:
0000000000100000 - 000000009afd0000 (usable) BIOS-e820: 000000009afd0000
- 000000009afde000 (ACPI data) BIOS-e820: 000000009afde000 -
000000009b000000 (ACPI NVS) BIOS-e820: 00000000e0000000 -
00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved) BIOS-e820: 00000000ff780000 -
0000000100000000 (reserved)
1583MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 634832
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 405456 pages,
LIFO batch:31
DMI 2.3 present.
Using APIC driver default
IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v000
ACPIAM ) @ 0x000fa970 ACPI: RSDT (v001 A M
I OEMRSDT 0x06000620 MSFT 0x00000097) @ 0x9afd0000 ACPI: FADT (v002 A M
I OEMFACP 0x06000620 MSFT 0x00000097) @ 0x9afd0200 ACPI: MADT (v001 A M
I OEMAPIC 0x06000620 MSFT 0x00000097) @ 0x9afd0390 ACPI: MCFG (v001 A M
I OEMMCFG 0x06000620 MSFT 0x00000097) @ 0x9afd03f0 ACPI: OEMB (v001 A M
I AMI_OEM 0x06000620 MSFT 0x00000097) @ 0x9afde040 ACPI: DSDT (v001
A0304 A0304001 0x00000001 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO
Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:15 APIC
version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01]
address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address
0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0
used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP
configuration information Allocating PCI resources starting at a0000000
(gap: 9b000000:45000000) Detected 2200.306 MHz processor. Built 1
zonelists. Total pages: 634832 Kernel command line: root=/dev/hdc2
vga=0x31a resume=/dev/hdc1 splash=silent bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU
exception support... done. Initializing CPU#0 PID hash table entries: 4096
(order: 12, 16384 bytes) Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory:
2511200k/2539328k available (1697k kernel code, 26908k reserved, 968k
data, 196k init, 1621824k highmem) Checking if this processor honours the
WP bit even in supervisor mode... Ok. Calibrating delay using timer
specific routine.. 4402.78 BogoMIPS (lpj=8805560) Security Framework
v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic
identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000
00000001 CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000
00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line),
D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001
00000000 00000001 Intel machine check architecture supported. Intel
machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is Freeing initrd memory: 2913k freed
ACPI: Core revision 20060707
CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02 Total of 1 processors
activated (4402.78 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31
apic1=0 pin1=2 apic2=0 pin2=0 Brought up 1 CPUs migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on 0:0
PCI: No mmconfig possible on 0:1
PCI: No mmconfig possible on 0:f
PCI: No mmconfig possible on 0:10
PCI: No mmconfig possible on 0:11
PCI: No mmconfig possible on 0:12
PCI: No mmconfig possible on 0:13
PCI: No mmconfig possible on 0:18
PCI: No mmconfig possible on 1:0
PCI: No mmconfig possible on 5:c
PCI: No mmconfig possible on 5:d
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0]
(0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is
0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT] ACPI: PCI
Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs
3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7
10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12
14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp:
PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report pnp: 00:06: ioport range 0xc00-0xc0f has been reserved pnp: 00:06:
ioport range 0xd00-0xd0f has been reserved pnp: 00:06: ioport range
0xa20-0xa2f has been reserved pnp: 00:06: ioport range 0xa30-0xa3f has
been reserved PCI: Bridge: 0000:00:01.0
IO window: 9000-bfff
MEM window: ff300000-ff3fffff
PREFETCH window: 9bf00000-dbefffff
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: ff400000-ff4fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: c000-cfff
MEM window: ff500000-ff5fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting
latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of
device 0000:02:00.0 to 64 PCI: Setting latency timer of device
0000:02:00.1 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP
established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind
hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables
configured (established 524288 bind 65536) TCP reno registered Machine
check exception polling timer started. apm: BIOS version 1.2 Flags 0x03
(Driver version 1.16ac) apm: overridden by ACPI. audit: initializing
netlink socket (disabled) audit(1167653837.668:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing
Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default) PCI: Setting latency timer of device
0000:02:00.0 to 64 pcie_portdrv_probe->Dev[287c:1106] has invalid IRQ.
Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port
Service[0000:02:00.0:pcie00] Allocate Port Service[0000:02:00.0:pcie01]
Allocate Port Service[0000:02:00.0:pcie03] PCI: Setting latency timer of
device 0000:02:00.1 to 64 pcie_portdrv_probe->Dev[287d:1106] has invalid
IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate
Port Service[0000:02:00.1:pcie00] Allocate Port
Service[0000:02:00.1:pcie01] Allocate Port Service[0000:02:00.1:pcie03]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 10240k,
total 16384k vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: protected mode interface info at c000:57d9 vesafb: pmi: set
display start = c00c586d, set palette = c00c58b9 vesafb: pmi: ports = b010
b016 b054 b038 b03c b05c b000 b004 b0b0 b0b2 b0b4 vesafb: scrolling:
redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash
3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318
bytes,<6>...found (1280x1024, 59769 bytes, v3). Console: switching to
colour frame buffer device 156x60 fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O
0x3f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a
post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at
0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC
Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as
/class/input/input1 input: ImExPS/2 Logitech Wheel Mouse as
/class/input/input2 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed Time: tsc clocksource has been
installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide:
Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
ACPI: Processor [CPU1] (supports 16 throttling states) ACPI Exception
(acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present
[20060707] ACPI: Getting cpuindex for acpiid 0x2 libata version 2.00
loaded.
ahci 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 193 ahci
0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part ata1:
SATA max UDMA/133 cmd 0xF8828D00 ctl 0x0 bmdma 0x0 irq 201 ata2: SATA max
UDMA/133 cmd 0xF8828D80 ctl 0x0 bmdma 0x0 irq 201 ata3: SATA max UDMA/133
cmd 0xF8828E00 ctl 0x0 bmdma 0x0 irq 201 ata4: SATA max UDMA/133 cmd
0xF8828E80 ctl 0x0 bmdma 0x0 irq 201 scsi0 : ahci ata1: SATA link up 1.5
Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 781422768
sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for
UDMA/133
scsi1 : ahci
ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying
in 5 secs ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00:
ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 0/32) ata2.00:
ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link
down (SStatus 0 SControl 300)
Vendor: ATA Model: HDS724040KLSA80 Rev: KFAO Type: Direct-Access
ANSI SCSI revision: 05
SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB) sda: Write
Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back SCSI device sda: 781422768
512-byte hdwr sectors (400088 MB) sda: Write Protect is off sda: Mode
Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: WDC WD5000KS-00M Rev: 07.0 Type: Direct-Access
ANSI SCSI revision: 05
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) sdb: Write
Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back SCSI device sdb: 976773168
512-byte hdwr sectors (500108 MB) sdb: Write Protect is off sdb: Mode
Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0 sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: Attached scsi disk sdb
sd 1:0:0:0: Attached scsi generic sg1 type 0 VP_IDE: IDE controller at PCI
slot 0000:00:0f.1 PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0
VP_IDE: chipset revision 7
VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8251
(rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1:
BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD2000JB-22REA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq
14
hda: max request size: 512KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63,
UDMA(100) hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 >
Probing IDE interface ide1...
hdc: Maxtor 6L200P0, ATA DISK drive
hdd: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive ide1 at
0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63,
UDMA(133) hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found Attempting manual
resume
ReiserFS: hdc2: found reiserfs format "3.6" with standard journal
ReiserFS: hdc2: using ordered data mode reiserfs: using flush barriers
ReiserFS: hdc2: journal params: device hdc2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30 ReiserFS: hdc2: checking transaction log (hdc2) ReiserFS: hdc2:
Using r5 hash to sort names usbcore: registered new driver usbfs usbcore:
registered new driver hub
pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Linux agpgart interface
v0.101 (c) Dave Jones shpchp: Standard Hot Plug PCI Controller Driver
version: 0.4 via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald
Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ
209 eth0: VIA Rhine II at 0x1d400, 00:17:31:b2:ef:89, IRQ 209. eth0: MII
PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. agpgart:
Detected AGP bridge 0
agpgart: AGP aperture is 64M @ 0xdc000000 ACPI: PCI Interrupt
0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 217 PCI: VIA IRQ fixup for
0000:00:10.4, from 5 to 9 ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 217, io mem 0xff6ff800 ehci_hcd 0000:00:10.4:
USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found,
idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3,
Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb
usb1: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd usb usb1:
SerialNumber: 0000:00:10.4
usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt
0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 225 PCI: VIA IRQ fixup for
0000:00:10.0, from 10 to 1 uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 225, io base 0x0000e080 usb usb2: new device
found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3,
Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb
usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb usb2:
SerialNumber: 0000:00:10.0
usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 217 PCI:
VIA IRQ fixup for 0000:00:10.1, from 5 to 9 uhci_hcd 0000:00:10.1: UHCI
Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 3 uhci_hcd 0000:00:10.1: irq 217, io base 0x0000e000 usb usb3:
new device found, idVendor=0000, idProduct=0000 usb usb3: new device
strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host
Controller usb usb3: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb
usb3: SerialNumber: 0000:00:10.1
usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 193 PCI:
VIA IRQ fixup for 0000:00:10.2, from 11 to 1 uhci_hcd 0000:00:10.2: UHCI
Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 4 uhci_hcd 0000:00:10.2: irq 193, io base 0x0000dc00 usb usb4:
new device found, idVendor=0000, idProduct=0000 usb usb4: new device
strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host
Controller usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb
usb4: SerialNumber: 0000:00:10.2
usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 209 PCI:
VIA IRQ fixup for 0000:00:10.3, from 3 to 1 uhci_hcd 0000:00:10.3: UHCI
Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 5 uhci_hcd 0000:00:10.3: irq 209, io base 0x0000d880 usb usb5:
new device found, idVendor=0000, idProduct=0000 usb usb5: new device
strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host
Controller usb usb5: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd usb
usb5: SerialNumber: 0000:00:10.3
usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2 ieee1394:
Initialized config rom entry `ip1394' hdd: ATAPI 40X CD-ROM CD-R/RW drive,
4096kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usb 2-1: new
device found, idVendor=03f0, idProduct=0a01 usb 2-1: new device strings:
Mfr=1, Product=2, SerialNumber=12 usb 2-1: Product: hp scanjet scanner
usb 2-1: Manufacturer: Hewlett-Packard usb 2-1: SerialNumber: CN36JS11P5
usb 2-1: configuration #1 chosen from 1 choice ACPI: PCI Interrupt
0000:05:0c.0[A] -> GSI 17 (level, low) -> IRQ 233 ohci1394: fw-host0:
OHCI-1394 1.0 (PCI): IRQ=[233] MMIO=[ff5ff800-ff5fffff] Max
Packet=[2048] IR/IT contexts=[4/8] gameport: EMU10K1 is
pci0000:05:0d.1/gameport0, io 0xcc00, speed 1104kHz ACPI: PCI Interrupt
0000:05:0d.0[A] -> GSI 18 (level, low) -> IRQ 50 usb 3-1: new full speed
USB device using uhci_hcd and address 2 Adding 2104472k swap on /dev/hdc1.
Priority:-1 extents:1 across:2104472k usb 3-1: new device found,
idVendor=046d, idProduct=08b4 usb 3-1: new device strings: Mfr=0,
Product=0, SerialNumber=0 usb 3-1: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2:
new device found, idVendor=03f0, idProduct=6204 usb 3-2: new device
strings: Mfr=1, Product=2, SerialNumber=3 usb 3-2: Product: deskjet 5100
usb 3-2: Manufacturer: hp
usb 3-2: SerialNumber: MY3AV4K0TM7A
usb 3-2: configuration #1 chosen from 1 choice pwc: Philips webcam module
version 10.0.12 loaded. pwc: Supports Philips PCA645/646, PCVC675/680/690,
PCVC720[40]/730/740/750 & PCVC830/840. pwc: Also supports the Askey VC010,
various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, pwc: the Creative
WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
pwc: Logitech QuickCam Zoom (new model) USB webcam detected. pwc:
Registered as /dev/video0.
usbcore: registered new driver Philips webcam drivers/usb/class/usblp.c:
usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid
0x6204 usbcore: registered new driver usblp drivers/usb/class/usblp.c:
v0.13: USB Printer Device Class driver usbcore: registered new driver
snd-usb-audio device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@redhat.com ieee1394: Error parsing configrom for node 0-00:1023
ieee1394: Host added: ID:BUS[0-01:1023] GUID[00308d027f21778d] loop:
loaded (max 8 devices) ReiserFS: hdc3: found reiserfs format "3.6" with
standard journal ReiserFS: hdc3: using ordered data mode reiserfs: using
flush barriers ReiserFS: hdc3: journal params: device hdc3, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age
30, max trans age 30 ReiserFS: hdc3: checking transaction log (hdc3)
ReiserFS: hdc3: Using r5 hash to sort names NTFS driver 2.1.27 [Flags: R/W
MODULE]. NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
AppArmor: AppArmor initialized
audit(1167653880.562:2): AppArmor initialized

NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006
Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack
version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack ACPI:
Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (version
2.00.00) powernow-k8: BIOS error - no PSB or ACPI _PSS objects powernow:
This module only works with AMD K7 CPUs eth0: link up, 100Mbps,
full-duplex, lpa 0x45E1 NET: Registered protocol family 17
audit(1167650297.402:3): audit_pid=4117 old=0 by auid=4294967295 hda:
drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd:
error=0x04 { DriveStatusError } ide: failed opcode was: 0xef bootsplash:
status on console 0 changed to on eth0: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.123 DST=224.0.0.251
LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353
LEN=89 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.123
DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP
SPT=5353 DPT=5353 LEN=89 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=
SRC=192.168.1.123 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=0
DF PROTO=UDP SPT=5353 DPT=5353 LEN=89 SFW2-INext-DROP-DEFLT IN=eth0 OUT=
MAC= SRC=192.168.1.123 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255
ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89

Je vous remercie de l'avoir consulte,

Bien amicalement,

Regis.

--
http://blog.bonifacio.com/