Suite =E0 une migration de de exchange 5.5 vers exchange=20
2003 tout ce passe bien (ouf!!la doc et les outils=20
microsoft sont bien fait) cependant le service=20
d'=E9v=E9nements ne semble pas fonctionner correctement et ne=20
d=E9marre pas ou en le for=E7ant de nombreuses fois (il en=20
ressort l'erreur 840154) j'ai besoin d'utiliser les=20
dossiers publics et je suis donc bien embet=E9 car je ne=20
trouve absolument pas d'infos sur ce probl=E8me.
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
Thierry DEMAN [MVP]
Bonsoir,
l'utilisation des dossiers publics ne nécessite pas le service d'évènement!!! => Seule l'utilisation des agents/scripts nécessite ce service.
Voici l'erreur qui est connue pour Exchange 5.5 => les élèments sans doutes les mêmes ...
L'erreur ne viendrait-elle pas des scripts qui seraient encore basés sur le serveur Exchange 5.5 qui n'existeraient plus.
A+
MAPI 0x80040154 Error Occurs When Starting Exchange 5.5 Event Service Liste des produits concernés par cet article. This article was previously published under Q270855 SYMPTOMS When you attempt to start the Microsoft Exchange Event Service, the service does not start, and you receive the following error message:
Could not start the Microsoft Exchange Event Service on SERVERNAME. Error 2140: An internal Windows NT Error occurred. The application event log reports the following event:
Event ID: 5 Source: MSExchangeES Description: An unexpected MAPI error occurred. Error returned was [0x80040154]. CAUSE This error can occur when the following .dll files are unregistered:
a.. Scripto.dll b.. Ss.dll c.. Esconf.dll This error can also occur when you uninstall Winsock Proxy Client from a server running Microsoft Exchange Server 5.5. RESOLUTION To resolve this issue, follow these steps: 1.. At a command prompt, type cd %windir%system32, and then press ENTER. 2.. Type the following commands, and press ENTER after each line: regsvr32 exchangedirbinscripto.dll regsvr32 exchangedirbinss.dll regsvr32 exchangedirbinesconf.dll
where exchangedir is the directory where Exchange Server is installed (by default, C:Exchsrvr).
3.. In Control Panel, double-click Services, and then double-click Event Service. Workaround When the Event Service does not start and error 0x80040154 occurs, if you reinstall the Microsoft Outlook client on the computer running Exchange Server, the Event Service starts.
To successfully reinstall the Outlook client on a computer running Exchange Server, follow these steps: 1.. Stop all the Exchange services and set the Microsoft Exchange System Attendant service's startup type to Disabled. 2.. Stop and disable all third-party services, such as monitoring agents, backup applications, and anti-virus applications. 3.. Stop the Simple Network Management Protocol (SNMP) service (if it is installed). 4.. Restart the server. 5.. Reinstall the Outlook client on the server. 6.. Change the Microsoft Exchange System Attendant startup type back to Automatic. 7.. Start all Exchange Services manually except for the Microsoft Exchange Event Service. 8.. Start the Microsoft Exchange Event Service manually. 9.. For any services that were disabled in step two, change the startup type to their previous values. Start any services that you manually disabled.
"Armel" a écrit dans le message de news: 076001c3fd51$96ad1650$ Bonjour,
Suite à une migration de de exchange 5.5 vers exchange 2003 tout ce passe bien (ouf!!la doc et les outils microsoft sont bien fait) cependant le service d'événements ne semble pas fonctionner correctement et ne démarre pas ou en le forçant de nombreuses fois (il en ressort l'erreur 840154) j'ai besoin d'utiliser les dossiers publics et je suis donc bien embeté car je ne trouve absolument pas d'infos sur ce problème.
D'avance merci.
Armel ROUX
Bonsoir,
l'utilisation des dossiers publics ne nécessite pas le service
d'évènement!!!
=> Seule l'utilisation des agents/scripts nécessite ce service.
Voici l'erreur qui est connue pour Exchange 5.5
=> les élèments sans doutes les mêmes ...
L'erreur ne viendrait-elle pas des scripts qui seraient encore basés sur le
serveur Exchange 5.5 qui n'existeraient plus.
A+
MAPI 0x80040154 Error Occurs When Starting Exchange 5.5 Event Service
Liste des produits concernés par cet article.
This article was previously published under Q270855
SYMPTOMS
When you attempt to start the Microsoft Exchange Event Service, the
service does not start, and you receive the following error message:
Could not start the Microsoft Exchange Event Service on \SERVERNAME.
Error 2140: An internal Windows NT Error occurred.
The application event log reports the following event:
Event ID: 5
Source: MSExchangeES
Description: An unexpected MAPI error occurred. Error returned was
[0x80040154].
CAUSE
This error can occur when the following .dll files are unregistered:
a.. Scripto.dll
b.. Ss.dll
c.. Esconf.dll
This error can also occur when you uninstall Winsock Proxy Client from
a server running Microsoft Exchange Server 5.5.
RESOLUTION
To resolve this issue, follow these steps:
1.. At a command prompt, type cd %windir%system32, and then press
ENTER.
2.. Type the following commands, and press ENTER after each line:
regsvr32 exchangedirbinscripto.dll
regsvr32 exchangedirbinss.dll
regsvr32 exchangedirbinesconf.dll
where exchangedir is the directory where Exchange Server is
installed (by default, C:Exchsrvr).
3.. In Control Panel, double-click Services, and then double-click
Event Service.
Workaround
When the Event Service does not start and error 0x80040154 occurs, if
you reinstall the Microsoft Outlook client on the computer running Exchange
Server, the Event Service starts.
To successfully reinstall the Outlook client on a computer running
Exchange Server, follow these steps:
1.. Stop all the Exchange services and set the Microsoft Exchange
System Attendant service's startup type to Disabled.
2.. Stop and disable all third-party services, such as monitoring
agents, backup applications, and anti-virus applications.
3.. Stop the Simple Network Management Protocol (SNMP) service (if
it is installed).
4.. Restart the server.
5.. Reinstall the Outlook client on the server.
6.. Change the Microsoft Exchange System Attendant startup type back
to Automatic.
7.. Start all Exchange Services manually except for the Microsoft
Exchange Event Service.
8.. Start the Microsoft Exchange Event Service manually.
9.. For any services that were disabled in step two, change the
startup type to their previous values. Start any services that you manually
disabled.
"Armel" <a.roux@strego.fr> a écrit dans le message de news:
076001c3fd51$96ad1650$a601280a@phx.gbl...
Bonjour,
Suite à une migration de de exchange 5.5 vers exchange
2003 tout ce passe bien (ouf!!la doc et les outils
microsoft sont bien fait) cependant le service
d'événements ne semble pas fonctionner correctement et ne
démarre pas ou en le forçant de nombreuses fois (il en
ressort l'erreur 840154) j'ai besoin d'utiliser les
dossiers publics et je suis donc bien embeté car je ne
trouve absolument pas d'infos sur ce problème.
l'utilisation des dossiers publics ne nécessite pas le service d'évènement!!! => Seule l'utilisation des agents/scripts nécessite ce service.
Voici l'erreur qui est connue pour Exchange 5.5 => les élèments sans doutes les mêmes ...
L'erreur ne viendrait-elle pas des scripts qui seraient encore basés sur le serveur Exchange 5.5 qui n'existeraient plus.
A+
MAPI 0x80040154 Error Occurs When Starting Exchange 5.5 Event Service Liste des produits concernés par cet article. This article was previously published under Q270855 SYMPTOMS When you attempt to start the Microsoft Exchange Event Service, the service does not start, and you receive the following error message:
Could not start the Microsoft Exchange Event Service on SERVERNAME. Error 2140: An internal Windows NT Error occurred. The application event log reports the following event:
Event ID: 5 Source: MSExchangeES Description: An unexpected MAPI error occurred. Error returned was [0x80040154]. CAUSE This error can occur when the following .dll files are unregistered:
a.. Scripto.dll b.. Ss.dll c.. Esconf.dll This error can also occur when you uninstall Winsock Proxy Client from a server running Microsoft Exchange Server 5.5. RESOLUTION To resolve this issue, follow these steps: 1.. At a command prompt, type cd %windir%system32, and then press ENTER. 2.. Type the following commands, and press ENTER after each line: regsvr32 exchangedirbinscripto.dll regsvr32 exchangedirbinss.dll regsvr32 exchangedirbinesconf.dll
where exchangedir is the directory where Exchange Server is installed (by default, C:Exchsrvr).
3.. In Control Panel, double-click Services, and then double-click Event Service. Workaround When the Event Service does not start and error 0x80040154 occurs, if you reinstall the Microsoft Outlook client on the computer running Exchange Server, the Event Service starts.
To successfully reinstall the Outlook client on a computer running Exchange Server, follow these steps: 1.. Stop all the Exchange services and set the Microsoft Exchange System Attendant service's startup type to Disabled. 2.. Stop and disable all third-party services, such as monitoring agents, backup applications, and anti-virus applications. 3.. Stop the Simple Network Management Protocol (SNMP) service (if it is installed). 4.. Restart the server. 5.. Reinstall the Outlook client on the server. 6.. Change the Microsoft Exchange System Attendant startup type back to Automatic. 7.. Start all Exchange Services manually except for the Microsoft Exchange Event Service. 8.. Start the Microsoft Exchange Event Service manually. 9.. For any services that were disabled in step two, change the startup type to their previous values. Start any services that you manually disabled.
"Armel" a écrit dans le message de news: 076001c3fd51$96ad1650$ Bonjour,
Suite à une migration de de exchange 5.5 vers exchange 2003 tout ce passe bien (ouf!!la doc et les outils microsoft sont bien fait) cependant le service d'événements ne semble pas fonctionner correctement et ne démarre pas ou en le forçant de nombreuses fois (il en ressort l'erreur 840154) j'ai besoin d'utiliser les dossiers publics et je suis donc bien embeté car je ne trouve absolument pas d'infos sur ce problème.
