Je trouve mes photos sombres , est ce que l'installation du firmware 1.0.4
peut résoudre mon problème .
Quels sont les bugs qu'il résoud ?
Quelle est la procédure d'installation ?
Par avance, merci pour vos conseils et vos solutions
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
Laurent L.
Bonsoir,
http://www.download.com/Canon-EOS-60D-firmware-update/3000-11129_4-10407558.html Toutes les instructions pour la maj sont dans l'exécutable. Copie ci dessous
J'ai aussi un D60. La sous expo ne me dérange pas, je la corrige quand nécessaire à partir du format Raw.
Cordialement
-- Laurent Lecatelier http://cjoint.com/galerie/
------------------------------
<< EOS D60 Firmware Update Installation Instructions Firmware version 1.0.4
Precautions
* Use the fully charged Battery Pack BP-511 or the dedicated Compact Power Adapter CA-PS400 for firmware update. * Do not shut off the power during the firmware writing operation. A power failure during the firmware writing operation may disable the camera. * Do not open the CF card slot cover or press any camera buttons during the firmware writing operation.
(1) Copy the "D60V104.fir" file to the formatted CF card.
If you do not have any of the card reading devices,
1. Insert the CF card into the EOS D60, and connect it to the PC with Interface Cable IFC-200PCU. 2. Double-click the "UploadFirmware" in the decompressed folder, and follow the instructions so that the "D60V104.fir" file can be copied onto the CF card in the EOS D60.
When you attempt to transfer the data to the CF card in the EOS D60 with the "UploadFirmware", do not open the CF card slot cover, turn the Main Switch or turn the power off until the data transfer is completed. Any of the above operations during data transfer will disable the firmware update.
(2) Insert he CF card with the firmware into the camera and turn the Main Switch on.
The following message will appear on the LCD after the firmware update program activates.
When using the "UploadFirmware" utility, please be sure that data transfer is completed and open the CF card slot cover. The firmware update program also starts as soon as closing the CF card lot cover and the same message will appear on the LCD.
Execute Upgrade [D60V104.FIR] [OK] [Cancel]
(3) Select [OK] with Quick Control dial of the camera and press the "SET" button.
If you select [Cancel] and press the "SET" button, the firmware update is cancelled. If the message of "Execute Upgrade" does not appear, please return to Procedure (1) as the firmware is not copied correctly.
To start checking the installed firmware.
A message of [Checking Firmware] appears and the firmware currently installed is being checked. This step will take approximately 6 seconds. An indicator (%) and a progress bar will appear during this step. Do not press the shutter button during this step. Checking firmware will be cancelled by pressing the shutter button.
After checking the current firmware, both the current and the replaced versions will be displayed on the LCD as follows.
Replace Firmware From [ 1.00 ] [ 1.01 ] or [ 1.02 ] To [ 1.04 ] [OK] [Cancel]
(4) Execute the firmware update after confirming the version to be installed, by selecting [OK] with Quick Control dial and press the "SET" button.
If you select [Cancel] and press the "SET" button, the firmware update is cancelled.
The following message will appear during firmware updating.
Re-writing Firmware xx% Completed
The update will take approximately 2 minutes.
Do not turn the power off during the firmware writing operation. Do not open the CF card slot cover or press any camera button during the firmware writing operation.
When the update is completed, the following message will appear on the LCD.
Firmware Replaced Successfully [OK]
(5) Complete the firmware update by pressing the "SET" button.
The firmware update is now completed. Format the CF card before it can be used.
If firmware version is "1.0.4", updating is completed properly. To confirm the firmware version, turn the Main Switch ON, and press the MENU button to display the menu. Turn the Quick Control Dial, and you see "Firmware Ver. 1.0.x" at the end of the settings shown in yellow, which is the currently installed firmware version number. For more details, please refer to the instruction manual on pages 32, 33 and 121.
If the ERROR message appears during the firmware update
In case the following message appears during the firmware update, please press the "SET" button and return to the beginning of the procedure. If you still have a problem, please contact Canon Service Center in your region.
http://www.download.com/Canon-EOS-60D-firmware-update/3000-11129_4-10407558.html
Toutes les instructions pour la maj sont dans l'exécutable. Copie ci dessous
J'ai aussi un D60. La sous expo ne me dérange pas, je la corrige quand
nécessaire à partir du format Raw.
Cordialement
--
Laurent Lecatelier
http://cjoint.com/galerie/
------------------------------
<< EOS D60 Firmware Update Installation Instructions Firmware version 1.0.4
Precautions
* Use the fully charged Battery Pack BP-511 or the dedicated Compact Power
Adapter
CA-PS400 for firmware update.
* Do not shut off the power during the firmware writing operation.
A power failure during the firmware writing operation may disable the
camera.
* Do not open the CF card slot cover or press any camera buttons during the
firmware
writing operation.
(1) Copy the "D60V104.fir" file to the formatted CF card.
If you do not have any of the card reading devices,
1. Insert the CF card into the EOS D60, and connect it to the PC
with Interface Cable IFC-200PCU.
2. Double-click the "UploadFirmware" in the decompressed folder,
and follow the instructions so that the "D60V104.fir" file
can be copied onto the CF card in the EOS D60.
When you attempt to transfer the data to the CF card in the EOS D60 with
the "UploadFirmware", do not open the CF card slot cover, turn the Main
Switch
or turn the power off until the data transfer is completed. Any of the
above
operations during data transfer will disable the firmware update.
(2) Insert he CF card with the firmware into the camera and turn the Main
Switch on.
The following message will appear on the LCD after the
firmware update program activates.
When using the "UploadFirmware" utility, please be sure that data transfer
is completed and open the CF card slot cover. The firmware update program
also starts as soon as closing the CF card lot cover and the same message
will appear on the LCD.
Execute Upgrade
[D60V104.FIR]
[OK] [Cancel]
(3) Select [OK] with Quick Control dial of the camera and press the "SET"
button.
If you select [Cancel] and press the "SET" button, the firmware update
is cancelled.
If the message of "Execute Upgrade" does not appear, please return to
Procedure (1) as the firmware is not copied correctly.
To start checking the installed firmware.
A message of [Checking Firmware] appears and the firmware currently
installed is being checked. This step will take approximately 6 seconds.
An indicator (%) and a progress bar will appear during this step.
Do not press the shutter button during this step. Checking firmware will
be cancelled by pressing the shutter button.
After checking the current firmware, both the current and the replaced
versions will be displayed on the LCD as follows.
Replace Firmware
From [ 1.00 ] [ 1.01 ] or [ 1.02 ]
To [ 1.04 ]
[OK] [Cancel]
(4) Execute the firmware update after confirming the version to be
installed,
by selecting [OK] with Quick Control dial and press the "SET" button.
If you select [Cancel] and press the "SET" button, the firmware update
is cancelled.
The following message will appear during firmware updating.
Re-writing Firmware
xx% Completed
The update will take approximately 2 minutes.
Do not turn the power off during the firmware writing operation.
Do not open the CF card slot cover or press any camera button during
the firmware writing operation.
When the update is completed, the following message will appear on the
LCD.
Firmware Replaced
Successfully
[OK]
(5) Complete the firmware update by pressing the "SET" button.
The firmware update is now completed. Format the CF card before it can be
used.
If firmware version is "1.0.4", updating is completed properly. To confirm
the firmware version,
turn the Main Switch ON, and press the MENU button to display the menu.
Turn the Quick
Control Dial, and you see "Firmware Ver. 1.0.x" at the end of the
settings shown in yellow,
which is the currently installed firmware version number. For more
details, please refer
to the instruction manual on pages 32, 33 and 121.
If the ERROR message appears during the firmware update
In case the following message appears during the firmware update,
please press the "SET" button and return to the beginning of the procedure.
If you still have a problem, please contact Canon Service Center in your
region.
http://www.download.com/Canon-EOS-60D-firmware-update/3000-11129_4-10407558.html Toutes les instructions pour la maj sont dans l'exécutable. Copie ci dessous
J'ai aussi un D60. La sous expo ne me dérange pas, je la corrige quand nécessaire à partir du format Raw.
Cordialement
-- Laurent Lecatelier http://cjoint.com/galerie/
------------------------------
<< EOS D60 Firmware Update Installation Instructions Firmware version 1.0.4
Precautions
* Use the fully charged Battery Pack BP-511 or the dedicated Compact Power Adapter CA-PS400 for firmware update. * Do not shut off the power during the firmware writing operation. A power failure during the firmware writing operation may disable the camera. * Do not open the CF card slot cover or press any camera buttons during the firmware writing operation.
(1) Copy the "D60V104.fir" file to the formatted CF card.
If you do not have any of the card reading devices,
1. Insert the CF card into the EOS D60, and connect it to the PC with Interface Cable IFC-200PCU. 2. Double-click the "UploadFirmware" in the decompressed folder, and follow the instructions so that the "D60V104.fir" file can be copied onto the CF card in the EOS D60.
When you attempt to transfer the data to the CF card in the EOS D60 with the "UploadFirmware", do not open the CF card slot cover, turn the Main Switch or turn the power off until the data transfer is completed. Any of the above operations during data transfer will disable the firmware update.
(2) Insert he CF card with the firmware into the camera and turn the Main Switch on.
The following message will appear on the LCD after the firmware update program activates.
When using the "UploadFirmware" utility, please be sure that data transfer is completed and open the CF card slot cover. The firmware update program also starts as soon as closing the CF card lot cover and the same message will appear on the LCD.
Execute Upgrade [D60V104.FIR] [OK] [Cancel]
(3) Select [OK] with Quick Control dial of the camera and press the "SET" button.
If you select [Cancel] and press the "SET" button, the firmware update is cancelled. If the message of "Execute Upgrade" does not appear, please return to Procedure (1) as the firmware is not copied correctly.
To start checking the installed firmware.
A message of [Checking Firmware] appears and the firmware currently installed is being checked. This step will take approximately 6 seconds. An indicator (%) and a progress bar will appear during this step. Do not press the shutter button during this step. Checking firmware will be cancelled by pressing the shutter button.
After checking the current firmware, both the current and the replaced versions will be displayed on the LCD as follows.
Replace Firmware From [ 1.00 ] [ 1.01 ] or [ 1.02 ] To [ 1.04 ] [OK] [Cancel]
(4) Execute the firmware update after confirming the version to be installed, by selecting [OK] with Quick Control dial and press the "SET" button.
If you select [Cancel] and press the "SET" button, the firmware update is cancelled.
The following message will appear during firmware updating.
Re-writing Firmware xx% Completed
The update will take approximately 2 minutes.
Do not turn the power off during the firmware writing operation. Do not open the CF card slot cover or press any camera button during the firmware writing operation.
When the update is completed, the following message will appear on the LCD.
Firmware Replaced Successfully [OK]
(5) Complete the firmware update by pressing the "SET" button.
The firmware update is now completed. Format the CF card before it can be used.
If firmware version is "1.0.4", updating is completed properly. To confirm the firmware version, turn the Main Switch ON, and press the MENU button to display the menu. Turn the Quick Control Dial, and you see "Firmware Ver. 1.0.x" at the end of the settings shown in yellow, which is the currently installed firmware version number. For more details, please refer to the instruction manual on pages 32, 33 and 121.
If the ERROR message appears during the firmware update
In case the following message appears during the firmware update, please press the "SET" button and return to the beginning of the procedure. If you still have a problem, please contact Canon Service Center in your region.