bonjour a vous,
voila j'ai un server Compaq Proliant 5500 7*9.1Gb en scsi raid0
4*Pentuim_Pro 200Mhz 800Mo de ram tout ceci sous un FreeBSD 5.4 avec le
SMP qui va bien , mon soucis est d'avoir une connection au reseau local
qui monte pas plus haut que 4.5Mo/s avec des cartes reseaux
Texas_Instrument (tl)
je sais pas d'=F4u peut provenir ce manque de vitesse .
Si tu commençais par donner ton dmesg, ça éclaircirait la boule de crsital ;-)
-- Xav
Jacques Caron
Salut,
On 18 Jun 2005 16:22:04 -0700, wrote:
mon soucis est d'avoir une connection au reseau local qui monte pas plus haut que 4.5Mo/s avec des cartes reseaux Texas_Instrument (tl) je sais pas d'ôu peut provenir ce manque de vitesse .
Un problème de duplex? Encore pire, un mélange de duplex?
Que disent ifconfig et netstat -in?
Jacques.
Salut,
On 18 Jun 2005 16:22:04 -0700, <bsdouille@numericable.fr> wrote:
mon soucis est d'avoir une connection au reseau local
qui monte pas plus haut que 4.5Mo/s avec des cartes reseaux
Texas_Instrument (tl)
je sais pas d'ôu peut provenir ce manque de vitesse .
Un problème de duplex? Encore pire, un mélange de duplex?
mon soucis est d'avoir une connection au reseau local qui monte pas plus haut que 4.5Mo/s avec des cartes reseaux Texas_Instrument (tl) je sais pas d'ôu peut provenir ce manque de vitesse .
Un problème de duplex? Encore pire, un mélange de duplex?
Que disent ifconfig et netstat -in?
Jacques.
bsdouille
mon ifconfig tl0: flags8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::208:c7ff:fe28:c737%tl0 prefixlen 64 scopeid 0x1 inet 81.220.237.*** netmask 0xffffff00 broadcast 81.220.237.255 ether 00:08:c7:28:c7:37 media: Ethernet autoselect (100baseTX <full-duplex>) status: active tl1: flags8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.0.14 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::208:c7ff:fe28:27c4%tl1 prefixlen 64 scopeid 0x2 ether 00:08:c7:28:27:c4 media: Ethernet autoselect (100baseTX <full-duplex>) status: active tl2: flags8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 ether 00:80:5f:fe:a7:c4 media: Ethernet autoselect (none) status: no carrier plip0: flags8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 pfsync0: flags=0<> mtu 2020 lo0: flags€49<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 pflog0: flags=0<> mtu 33208
et enfin le demsg FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 3 cpu1 (AP): APIC ID: 0 cpu2 (AP): APIC ID: 1 cpu3 (AP): APIC ID: 2 ioapic0: Changing APIC ID to 8 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-27 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard cpu1 on motherboard cpu2 on motherboard cpu3 on motherboard pcib0: <ServerWorks NB6536 2.0HE host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: <display, VGA> at device 6.0 (no driver attached) tl0: <Compaq Netelligent 10/100> port 0x5000-0x500f irq 5 at device 12.0 on pci0 miibus0: <MII bus> on tl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tlphy0: <ThunderLAN 10baseT media interface> on miibus0 tlphy0: 10base2/BNC, 10base5/AUI tl0: Ethernet address: 00:08:c7:28:c7:37 tl0: if_start running deferred for Giant tl1: <Compaq Netelligent 10/100> port 0x5010-0x501f irq 9 at device 13.0 on pci0 miibus1: <MII bus> on tl1 nsphy1: <DP83840 10/100 media interface> on miibus1 nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tlphy1: <ThunderLAN 10baseT media interface> on miibus1 tlphy1: 10base2/BNC, 10base5/AUI tl1: Ethernet address: 00:08:c7:28:27:c4 tl1: if_start running deferred for Giant eisab0: <PCI-EISA bridge> at device 15.0 on pci0 eisa0: <EISA bus> on eisab0 mainboard0: <CPQ0561 (System Board)> on eisa0 slot 0 isa0: <ISA bus> on eisab0 pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> pcibus 1 on motherboard pci1: <PCI bus> on pcib1 sym0: <875> port 0x6000-0x60ff mem 0xc6eff000-0xc6efffff,0xc6efdf00-0xc6efdfff irq 10 at device 4.0 on pci1 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x6400-0x64ff mem 0xc6efe000-0xc6efefff,0xc6efde00-0xc6efdeff irq 11 at device 4.1 on pci1 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking tl2: <Compaq Netelligent 10/100> port 0x6800-0x680f irq 10 at device 6.0 on pci1 miibus2: <MII bus> on tl2 nsphy2: <DP83840 10/100 media interface> on miibus2 nsphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tlphy2: <ThunderLAN 10baseT media interface> on miibus2 tlphy2: 10base2/BNC, 10base5/AUI tl2: Ethernet address: 00:80:5f:fe:a7:c4 tl2: if_start running deferred for Giant pcib2: <PCI-PCI bridge> at device 8.0 on pci1 pci2: <PCI bus> on pcib2 ida0: <Compaq Smart Array 3200 controller> port 0x7000-0x70ff mem 0xc6ffff00-0xc6ffffff irq 15 at device 0.0 on pci2 ida0: drives=1 firm_rev=4.32 idad0: <Compaq Logical Drive> on ida0 idad0: 60741MB (124399200 sectors), blocksizeQ2 orm0: <ISA Option ROMs> at iomem 0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata1 at port 0x376,0x170-0x177 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acd0: CDROM <CD-ROM CDU571-Q/1.1a> at ata0-master PIO3 ad1: 125MB <Maxtor 7131 AT/3A5F2559> [1002/8/32] at ata0-slave PIO2 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched!
voila voila je les avais pas mis car je ne trouve rien de pas normal enfin je me trompe surment
voila merci à vous
bsdouille
mon ifconfig
tl0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::208:c7ff:fe28:c737%tl0 prefixlen 64 scopeid 0x1
inet 81.220.237.*** netmask 0xffffff00 broadcast 81.220.237.255
ether 00:08:c7:28:c7:37
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
tl1: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.14 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::208:c7ff:fe28:27c4%tl1 prefixlen 64 scopeid 0x2
ether 00:08:c7:28:27:c4
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
tl2: flags=108802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:80:5f:fe:a7:c4
media: Ethernet autoselect (none)
status: no carrier
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
pfsync0: flags=0<> mtu 2020
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
pflog0: flags=0<> mtu 33208
et enfin le demsg
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 3
cpu1 (AP): APIC ID: 0
cpu2 (AP): APIC ID: 1
cpu3 (AP): APIC ID: 2
ioapic0: Changing APIC ID to 8
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-27 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
cpu2 on motherboard
cpu3 on motherboard
pcib0: <ServerWorks NB6536 2.0HE host to PCI bridge> pcibus 0 on
motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 6.0 (no driver attached)
tl0: <Compaq Netelligent 10/100> port 0x5000-0x500f irq 5 at device
12.0 on pci0
miibus0: <MII bus> on tl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0: 10base2/BNC, 10base5/AUI
tl0: Ethernet address: 00:08:c7:28:c7:37
tl0: if_start running deferred for Giant
tl1: <Compaq Netelligent 10/100> port 0x5010-0x501f irq 9 at device
13.0 on pci0
miibus1: <MII bus> on tl1
nsphy1: <DP83840 10/100 media interface> on miibus1
nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy1: <ThunderLAN 10baseT media interface> on miibus1
tlphy1: 10base2/BNC, 10base5/AUI
tl1: Ethernet address: 00:08:c7:28:27:c4
tl1: if_start running deferred for Giant
eisab0: <PCI-EISA bridge> at device 15.0 on pci0
eisa0: <EISA bus> on eisab0
mainboard0: <CPQ0561 (System Board)> on eisa0 slot 0
isa0: <ISA bus> on eisab0
pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> pcibus 1 on
motherboard
pci1: <PCI bus> on pcib1
sym0: <875> port 0x6000-0x60ff mem
0xc6eff000-0xc6efffff,0xc6efdf00-0xc6efdfff irq 10 at device 4.0 on
pci1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x6400-0x64ff mem
0xc6efe000-0xc6efefff,0xc6efde00-0xc6efdeff irq 11 at device 4.1 on
pci1
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
tl2: <Compaq Netelligent 10/100> port 0x6800-0x680f irq 10 at device
6.0 on pci1
miibus2: <MII bus> on tl2
nsphy2: <DP83840 10/100 media interface> on miibus2
nsphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy2: <ThunderLAN 10baseT media interface> on miibus2
tlphy2: 10base2/BNC, 10base5/AUI
tl2: Ethernet address: 00:80:5f:fe:a7:c4
tl2: if_start running deferred for Giant
pcib2: <PCI-PCI bridge> at device 8.0 on pci1
pci2: <PCI bus> on pcib2
ida0: <Compaq Smart Array 3200 controller> port 0x7000-0x70ff mem
0xc6ffff00-0xc6ffffff irq 15 at device 0.0 on pci2
ida0: drives=1 firm_rev=4.32
idad0: <Compaq Logical Drive> on ida0
idad0: 60741MB (124399200 sectors), blocksize=512
orm0: <ISA Option ROMs> at iomem
0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on
isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
acd0: CDROM <CD-ROM CDU571-Q/1.1a> at ata0-master PIO3
ad1: 125MB <Maxtor 7131 AT/3A5F2559> [1002/8/32] at ata0-slave PIO2
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
voila voila je les avais pas mis car je ne trouve rien de pas normal
enfin je me trompe surment
et enfin le demsg FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 3 cpu1 (AP): APIC ID: 0 cpu2 (AP): APIC ID: 1 cpu3 (AP): APIC ID: 2 ioapic0: Changing APIC ID to 8 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-27 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard cpu1 on motherboard cpu2 on motherboard cpu3 on motherboard pcib0: <ServerWorks NB6536 2.0HE host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: <display, VGA> at device 6.0 (no driver attached) tl0: <Compaq Netelligent 10/100> port 0x5000-0x500f irq 5 at device 12.0 on pci0 miibus0: <MII bus> on tl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tlphy0: <ThunderLAN 10baseT media interface> on miibus0 tlphy0: 10base2/BNC, 10base5/AUI tl0: Ethernet address: 00:08:c7:28:c7:37 tl0: if_start running deferred for Giant tl1: <Compaq Netelligent 10/100> port 0x5010-0x501f irq 9 at device 13.0 on pci0 miibus1: <MII bus> on tl1 nsphy1: <DP83840 10/100 media interface> on miibus1 nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tlphy1: <ThunderLAN 10baseT media interface> on miibus1 tlphy1: 10base2/BNC, 10base5/AUI tl1: Ethernet address: 00:08:c7:28:27:c4 tl1: if_start running deferred for Giant eisab0: <PCI-EISA bridge> at device 15.0 on pci0 eisa0: <EISA bus> on eisab0 mainboard0: <CPQ0561 (System Board)> on eisa0 slot 0 isa0: <ISA bus> on eisab0 pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> pcibus 1 on motherboard pci1: <PCI bus> on pcib1 sym0: <875> port 0x6000-0x60ff mem 0xc6eff000-0xc6efffff,0xc6efdf00-0xc6efdfff irq 10 at device 4.0 on pci1 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: <875> port 0x6400-0x64ff mem 0xc6efe000-0xc6efefff,0xc6efde00-0xc6efdeff irq 11 at device 4.1 on pci1 sym1: No NVRAM, ID 7, Fast-20, SE, parity checking tl2: <Compaq Netelligent 10/100> port 0x6800-0x680f irq 10 at device 6.0 on pci1 miibus2: <MII bus> on tl2 nsphy2: <DP83840 10/100 media interface> on miibus2 nsphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tlphy2: <ThunderLAN 10baseT media interface> on miibus2 tlphy2: 10base2/BNC, 10base5/AUI tl2: Ethernet address: 00:80:5f:fe:a7:c4 tl2: if_start running deferred for Giant pcib2: <PCI-PCI bridge> at device 8.0 on pci1 pci2: <PCI bus> on pcib2 ida0: <Compaq Smart Array 3200 controller> port 0x7000-0x70ff mem 0xc6ffff00-0xc6ffffff irq 15 at device 0.0 on pci2 ida0: drives=1 firm_rev=4.32 idad0: <Compaq Logical Drive> on ida0 idad0: 60741MB (124399200 sectors), blocksizeQ2 orm0: <ISA Option ROMs> at iomem 0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata1 at port 0x376,0x170-0x177 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acd0: CDROM <CD-ROM CDU571-Q/1.1a> at ata0-master PIO3 ad1: 125MB <Maxtor 7131 AT/3A5F2559> [1002/8/32] at ata0-slave PIO2 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched!
voila voila je les avais pas mis car je ne trouve rien de pas normal enfin je me trompe surment
voila merci à vous
bsdouille
bsdouille
hummm merci a toi :) mais non le debit est pas meilleur sans le SMP ceci dit si je met un OpenBSD cela va peut-etre regler le probleme car je crois savoir que Open supporte bcp plus de cartes reseaux !!??
bsdouille
hummm merci a toi :)
mais non le debit est pas meilleur sans le SMP
ceci dit si je met un OpenBSD cela va peut-etre regler le probleme
car je crois savoir que Open supporte bcp plus de cartes reseaux !!??
hummm merci a toi :) mais non le debit est pas meilleur sans le SMP ceci dit si je met un OpenBSD cela va peut-etre regler le probleme car je crois savoir que Open supporte bcp plus de cartes reseaux !!??
