Après avoir cherché beaucoup et expérimenté en dirty mode
(essai-erreur), je suis arrivé à un xorg qui fonctionne, même si c'est
un peu le boxon dedans :-P
Si je lance startx, il se lance avec la résolution de l'écran du portable
Si je lance startx -- -layout external, il se lance avec la résolution
de l'écran externe (1280x1024 pour moi)
Dans les deux cas, les deux écrans sont des clones.
Quand j'utilise l'écran externe, je suis au bureau, et j'ai un clavier
externe usb. Je laisse alors le portable fermé sur un coin du bureau.
Voici mon xorg.conf :
Section "ServerLayout"
Identifier "real"
Screen 0 "real-screen"
#Screen 1 "extra-screen"# LeftOf "real-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "external"
Screen 0 "external-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "real-keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbVariant" "deadkeys"
#Option "XkbModel" "pc105"
#Option "XkbLayout" "be"
EndSection
Section "InputDevice"
Identifier "real-mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "real-monitor"
VendorName "QDS"
ModelName "15"
EndSection
Section "Device"
#Driver "radeon"
#Driver "ati"
Identifier "real-card"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Option "AGPMode" "4"
Option "AGPFastWrite" "yes"
Option "EnablePageFlip" "on"
Option "DDCMode" "Yes"
Option "DynamicClocks" "on"
Option "BIOSHotkeys" "on"
#Option "XAANoOffscreenPixmaps" "true" # AIGLX
Option "DRI" "true"
Option "MergedFB" "off"
Option "RenderAccel" "true"
Option "backingstore" "true"
Option "CRT2HSync" "30.0 - 121.0"
Option "CRT2VRefresh" "48.0 - 160.0"
Option "MonitorLayout" "CRT, LVDS"
#Option "CRT2Position" "Clone"
Identifier "external-monitor-card"
Screen 0
Driver "fglrx" #"radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility M7 LW [Radeon Mobility 7500]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "real-screen"
Device "real-card"
Monitor "real-monitor"
Option "BIOSHotkeys" "on"
DefaultDepth 24
Option "MonitorLayout" "LVDS, TMDS"
Option "MergedFB" "true"
Option "MetaModes" "1024x768-1280x1024 1024x768-1024x768"
SubSection "Display"
#Virtual 1280 1024
Modes "1024x768 800x600 640x480"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "external-screen"
Device "external-monitor-card"
Monitor "real-monitor"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Après avoir cherché beaucoup et expérimenté en dirty mode
(essai-erreur), je suis arrivé à un xorg qui fonctionne, même si c'est
un peu le boxon dedans :-P
Si je lance startx, il se lance avec la résolution de l'écran du portable
Si je lance startx -- -layout external, il se lance avec la résolution
de l'écran externe (1280x1024 pour moi)
Dans les deux cas, les deux écrans sont des clones.
Quand j'utilise l'écran externe, je suis au bureau, et j'ai un clavier
externe usb. Je laisse alors le portable fermé sur un coin du bureau.
Voici mon xorg.conf :
Section "ServerLayout"
Identifier "real"
Screen 0 "real-screen"
#Screen 1 "extra-screen"# LeftOf "real-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "external"
Screen 0 "external-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "real-keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbVariant" "deadkeys"
#Option "XkbModel" "pc105"
#Option "XkbLayout" "be"
EndSection
Section "InputDevice"
Identifier "real-mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "real-monitor"
VendorName "QDS"
ModelName "15"
EndSection
Section "Device"
#Driver "radeon"
#Driver "ati"
Identifier "real-card"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Option "AGPMode" "4"
Option "AGPFastWrite" "yes"
Option "EnablePageFlip" "on"
Option "DDCMode" "Yes"
Option "DynamicClocks" "on"
Option "BIOSHotkeys" "on"
#Option "XAANoOffscreenPixmaps" "true" # AIGLX
Option "DRI" "true"
Option "MergedFB" "off"
Option "RenderAccel" "true"
Option "backingstore" "true"
Option "CRT2HSync" "30.0 - 121.0"
Option "CRT2VRefresh" "48.0 - 160.0"
Option "MonitorLayout" "CRT, LVDS"
#Option "CRT2Position" "Clone"
Identifier "external-monitor-card"
Screen 0
Driver "fglrx" #"radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility M7 LW [Radeon Mobility 7500]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "real-screen"
Device "real-card"
Monitor "real-monitor"
Option "BIOSHotkeys" "on"
DefaultDepth 24
Option "MonitorLayout" "LVDS, TMDS"
Option "MergedFB" "true"
Option "MetaModes" "1024x768-1280x1024 1024x768-1024x768"
SubSection "Display"
#Virtual 1280 1024
Modes "1024x768 800x600 640x480"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "external-screen"
Device "external-monitor-card"
Monitor "real-monitor"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Après avoir cherché beaucoup et expérimenté en dirty mode
(essai-erreur), je suis arrivé à un xorg qui fonctionne, même si c'est
un peu le boxon dedans :-P
Si je lance startx, il se lance avec la résolution de l'écran du portable
Si je lance startx -- -layout external, il se lance avec la résolution
de l'écran externe (1280x1024 pour moi)
Dans les deux cas, les deux écrans sont des clones.
Quand j'utilise l'écran externe, je suis au bureau, et j'ai un clavier
externe usb. Je laisse alors le portable fermé sur un coin du bureau.
Voici mon xorg.conf :
Section "ServerLayout"
Identifier "real"
Screen 0 "real-screen"
#Screen 1 "extra-screen"# LeftOf "real-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "external"
Screen 0 "external-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "real-keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbVariant" "deadkeys"
#Option "XkbModel" "pc105"
#Option "XkbLayout" "be"
EndSection
Section "InputDevice"
Identifier "real-mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "real-monitor"
VendorName "QDS"
ModelName "15"
EndSection
Section "Device"
#Driver "radeon"
#Driver "ati"
Identifier "real-card"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Option "AGPMode" "4"
Option "AGPFastWrite" "yes"
Option "EnablePageFlip" "on"
Option "DDCMode" "Yes"
Option "DynamicClocks" "on"
Option "BIOSHotkeys" "on"
#Option "XAANoOffscreenPixmaps" "true" # AIGLX
Option "DRI" "true"
Option "MergedFB" "off"
Option "RenderAccel" "true"
Option "backingstore" "true"
Option "CRT2HSync" "30.0 - 121.0"
Option "CRT2VRefresh" "48.0 - 160.0"
Option "MonitorLayout" "CRT, LVDS"
#Option "CRT2Position" "Clone"
Identifier "external-monitor-card"
Screen 0
Driver "fglrx" #"radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility M7 LW [Radeon Mobility 7500]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "real-screen"
Device "real-card"
Monitor "real-monitor"
Option "BIOSHotkeys" "on"
DefaultDepth 24
Option "MonitorLayout" "LVDS, TMDS"
Option "MergedFB" "true"
Option "MetaModes" "1024x768-1280x1024 1024x768-1024x768"
SubSection "Display"
#Virtual 1280 1024
Modes "1024x768 800x600 640x480"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "external-screen"
Device "external-monitor-card"
Monitor "real-monitor"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Merci à vous ! je vais tester ça, je vous tiendraiau courant.
Pour fglrx ... j'ai passé deux plombes à essayer de le compiler. LE
linux q'ils m'ont installé est livré sans les cou**** : j'ai du le
rootkiter comme un sauvage rien que pour installer gcc qu'était pas dispo !
Et les sources du noyau j'en aprle même pas, et malgré ca, ca veut pas
compiler, les sources que j'ai n'étant pas pile poil celles patchées de
partout de la sled 10.
Un collègue a une mobility M7, qu'il a réussi à faire obéir au doigt et
à l'oeil avec les pilotes radeon. Mais moi, j'ai galéré pour rien.
Ah, détail amusant : je suis en xorg 6.9,
ouinnn
je tairais le nom de ma boîte, j'ai honte ...
Etienne Hilson wrote:Après avoir cherché beaucoup et expérimenté en dirty mode
(essai-erreur), je suis arrivé à un xorg qui fonctionne, même si c'est
un peu le boxon dedans :-P
Si je lance startx, il se lance avec la résolution de l'écran du portable
Si je lance startx -- -layout external, il se lance avec la résolution
de l'écran externe (1280x1024 pour moi)
Dans les deux cas, les deux écrans sont des clones.
Quand j'utilise l'écran externe, je suis au bureau, et j'ai un clavier
externe usb. Je laisse alors le portable fermé sur un coin du bureau.
Voici mon xorg.conf :
Section "ServerLayout"
Identifier "real"
Screen 0 "real-screen"
#Screen 1 "extra-screen"# LeftOf "real-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "external"
Screen 0 "external-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "real-keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbVariant" "deadkeys"
#Option "XkbModel" "pc105"
#Option "XkbLayout" "be"
EndSection
Section "InputDevice"
Identifier "real-mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "real-monitor"
VendorName "QDS"
ModelName "15"
EndSection
Section "Device"
#Driver "radeon"
#Driver "ati"
Identifier "real-card"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Option "AGPMode" "4"
Option "AGPFastWrite" "yes"
Option "EnablePageFlip" "on"
Option "DDCMode" "Yes"
Option "DynamicClocks" "on"
Option "BIOSHotkeys" "on"
#Option "XAANoOffscreenPixmaps" "true" # AIGLX
Option "DRI" "true"
Option "MergedFB" "off"
Option "RenderAccel" "true"
Option "backingstore" "true"
Option "CRT2HSync" "30.0 - 121.0"
Option "CRT2VRefresh" "48.0 - 160.0"
Option "MonitorLayout" "CRT, LVDS"
#Option "CRT2Position" "Clone"
Identifier "external-monitor-card"
Screen 0
Driver "fglrx" #"radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility M7 LW [Radeon Mobility 7500]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "real-screen"
Device "real-card"
Monitor "real-monitor"
Option "BIOSHotkeys" "on"
DefaultDepth 24
Option "MonitorLayout" "LVDS, TMDS"
Option "MergedFB" "true"
Option "MetaModes" "1024x768-1280x1024 1024x768-1024x768"
SubSection "Display"
#Virtual 1280 1024
Modes "1024x768 800x600 640x480"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "external-screen"
Device "external-monitor-card"
Monitor "real-monitor"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Merci à vous ! je vais tester ça, je vous tiendraiau courant.
Pour fglrx ... j'ai passé deux plombes à essayer de le compiler. LE
linux q'ils m'ont installé est livré sans les cou**** : j'ai du le
rootkiter comme un sauvage rien que pour installer gcc qu'était pas dispo !
Et les sources du noyau j'en aprle même pas, et malgré ca, ca veut pas
compiler, les sources que j'ai n'étant pas pile poil celles patchées de
partout de la sled 10.
Un collègue a une mobility M7, qu'il a réussi à faire obéir au doigt et
à l'oeil avec les pilotes radeon. Mais moi, j'ai galéré pour rien.
Ah, détail amusant : je suis en xorg 6.9,
ouinnn
je tairais le nom de ma boîte, j'ai honte ...
Etienne Hilson wrote:
Après avoir cherché beaucoup et expérimenté en dirty mode
(essai-erreur), je suis arrivé à un xorg qui fonctionne, même si c'est
un peu le boxon dedans :-P
Si je lance startx, il se lance avec la résolution de l'écran du portable
Si je lance startx -- -layout external, il se lance avec la résolution
de l'écran externe (1280x1024 pour moi)
Dans les deux cas, les deux écrans sont des clones.
Quand j'utilise l'écran externe, je suis au bureau, et j'ai un clavier
externe usb. Je laisse alors le portable fermé sur un coin du bureau.
Voici mon xorg.conf :
Section "ServerLayout"
Identifier "real"
Screen 0 "real-screen"
#Screen 1 "extra-screen"# LeftOf "real-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "external"
Screen 0 "external-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "real-keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbVariant" "deadkeys"
#Option "XkbModel" "pc105"
#Option "XkbLayout" "be"
EndSection
Section "InputDevice"
Identifier "real-mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "real-monitor"
VendorName "QDS"
ModelName "15"
EndSection
Section "Device"
#Driver "radeon"
#Driver "ati"
Identifier "real-card"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Option "AGPMode" "4"
Option "AGPFastWrite" "yes"
Option "EnablePageFlip" "on"
Option "DDCMode" "Yes"
Option "DynamicClocks" "on"
Option "BIOSHotkeys" "on"
#Option "XAANoOffscreenPixmaps" "true" # AIGLX
Option "DRI" "true"
Option "MergedFB" "off"
Option "RenderAccel" "true"
Option "backingstore" "true"
Option "CRT2HSync" "30.0 - 121.0"
Option "CRT2VRefresh" "48.0 - 160.0"
Option "MonitorLayout" "CRT, LVDS"
#Option "CRT2Position" "Clone"
Identifier "external-monitor-card"
Screen 0
Driver "fglrx" #"radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility M7 LW [Radeon Mobility 7500]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "real-screen"
Device "real-card"
Monitor "real-monitor"
Option "BIOSHotkeys" "on"
DefaultDepth 24
Option "MonitorLayout" "LVDS, TMDS"
Option "MergedFB" "true"
Option "MetaModes" "1024x768-1280x1024 1024x768-1024x768"
SubSection "Display"
#Virtual 1280 1024
Modes "1024x768 800x600 640x480"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "external-screen"
Device "external-monitor-card"
Monitor "real-monitor"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Merci à vous ! je vais tester ça, je vous tiendraiau courant.
Pour fglrx ... j'ai passé deux plombes à essayer de le compiler. LE
linux q'ils m'ont installé est livré sans les cou**** : j'ai du le
rootkiter comme un sauvage rien que pour installer gcc qu'était pas dispo !
Et les sources du noyau j'en aprle même pas, et malgré ca, ca veut pas
compiler, les sources que j'ai n'étant pas pile poil celles patchées de
partout de la sled 10.
Un collègue a une mobility M7, qu'il a réussi à faire obéir au doigt et
à l'oeil avec les pilotes radeon. Mais moi, j'ai galéré pour rien.
Ah, détail amusant : je suis en xorg 6.9,
ouinnn
je tairais le nom de ma boîte, j'ai honte ...
Etienne Hilson wrote:Après avoir cherché beaucoup et expérimenté en dirty mode
(essai-erreur), je suis arrivé à un xorg qui fonctionne, même si c'est
un peu le boxon dedans :-P
Si je lance startx, il se lance avec la résolution de l'écran du portable
Si je lance startx -- -layout external, il se lance avec la résolution
de l'écran externe (1280x1024 pour moi)
Dans les deux cas, les deux écrans sont des clones.
Quand j'utilise l'écran externe, je suis au bureau, et j'ai un clavier
externe usb. Je laisse alors le portable fermé sur un coin du bureau.
Voici mon xorg.conf :
Section "ServerLayout"
Identifier "real"
Screen 0 "real-screen"
#Screen 1 "extra-screen"# LeftOf "real-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "external"
Screen 0 "external-screen"
InputDevice "real-mouse" "CorePointer"
InputDevice "real-keyboard" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "real-keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbVariant" "deadkeys"
#Option "XkbModel" "pc105"
#Option "XkbLayout" "be"
EndSection
Section "InputDevice"
Identifier "real-mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "real-monitor"
VendorName "QDS"
ModelName "15"
EndSection
Section "Device"
#Driver "radeon"
#Driver "ati"
Identifier "real-card"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Option "AGPMode" "4"
Option "AGPFastWrite" "yes"
Option "EnablePageFlip" "on"
Option "DDCMode" "Yes"
Option "DynamicClocks" "on"
Option "BIOSHotkeys" "on"
#Option "XAANoOffscreenPixmaps" "true" # AIGLX
Option "DRI" "true"
Option "MergedFB" "off"
Option "RenderAccel" "true"
Option "backingstore" "true"
Option "CRT2HSync" "30.0 - 121.0"
Option "CRT2VRefresh" "48.0 - 160.0"
Option "MonitorLayout" "CRT, LVDS"
#Option "CRT2Position" "Clone"
Identifier "external-monitor-card"
Screen 0
Driver "fglrx" #"radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility M7 LW [Radeon Mobility 7500]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "real-screen"
Device "real-card"
Monitor "real-monitor"
Option "BIOSHotkeys" "on"
DefaultDepth 24
Option "MonitorLayout" "LVDS, TMDS"
Option "MergedFB" "true"
Option "MetaModes" "1024x768-1280x1024 1024x768-1024x768"
SubSection "Display"
#Virtual 1280 1024
Modes "1024x768 800x600 640x480"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "external-screen"
Device "external-monitor-card"
Monitor "real-monitor"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Bon, ben ca marche.
Est-ce qu'il n'y a pas moyen de tweaker gdm de facona passer des
options de démarrage du server X ?
(genre le layout, quitte a choisir parmi plusieurs sessions ?)
Bon, ben ca marche.
Est-ce qu'il n'y a pas moyen de tweaker gdm de facona passer des
options de démarrage du server X ?
(genre le layout, quitte a choisir parmi plusieurs sessions ?)
Bon, ben ca marche.
Est-ce qu'il n'y a pas moyen de tweaker gdm de facona passer des
options de démarrage du server X ?
(genre le layout, quitte a choisir parmi plusieurs sessions ?)
On 6/4/07, Pascal Ronecker wrote:
Bon, ben ca marche.
Est-ce qu'il n'y a pas moyen de tweaker gdm de facona passer des
options de démarrage du server X ?
(genre le layout, quitte a choisir parmi plusieurs sessions ?)
J'ai cherché, mais j'ai pas trouvé.
Le seul moyen est de se faire dans le grub plusieurs entrées, de
passer le softlevel au kernel sur la ligne du grub, et de jouer avec
les runlevel dans gentoo
Le problème, c'est que tout peut être fait avec les runlevel, SAUF le
serverlayout de xorg.conf :'(
Donc, direction bidouille : un fichier init que tu fais toi-même et
qui en fonction du runlevel, écrase le xorg.conf avec le xorg.conf qui
convient à la situation.
Perso, je suis trop flemmard pour l'avoir implémanté :-P
Etienne
On 6/4/07, Pascal Ronecker <pascal.ronecker@noos.fr> wrote:
Bon, ben ca marche.
Est-ce qu'il n'y a pas moyen de tweaker gdm de facona passer des
options de démarrage du server X ?
(genre le layout, quitte a choisir parmi plusieurs sessions ?)
J'ai cherché, mais j'ai pas trouvé.
Le seul moyen est de se faire dans le grub plusieurs entrées, de
passer le softlevel au kernel sur la ligne du grub, et de jouer avec
les runlevel dans gentoo
Le problème, c'est que tout peut être fait avec les runlevel, SAUF le
serverlayout de xorg.conf :'(
Donc, direction bidouille : un fichier init que tu fais toi-même et
qui en fonction du runlevel, écrase le xorg.conf avec le xorg.conf qui
convient à la situation.
Perso, je suis trop flemmard pour l'avoir implémanté :-P
Etienne
On 6/4/07, Pascal Ronecker wrote:
Bon, ben ca marche.
Est-ce qu'il n'y a pas moyen de tweaker gdm de facona passer des
options de démarrage du server X ?
(genre le layout, quitte a choisir parmi plusieurs sessions ?)
J'ai cherché, mais j'ai pas trouvé.
Le seul moyen est de se faire dans le grub plusieurs entrées, de
passer le softlevel au kernel sur la ligne du grub, et de jouer avec
les runlevel dans gentoo
Le problème, c'est que tout peut être fait avec les runlevel, SAUF le
serverlayout de xorg.conf :'(
Donc, direction bidouille : un fichier init que tu fais toi-même et
qui en fonction du runlevel, écrase le xorg.conf avec le xorg.conf qui
convient à la situation.
Perso, je suis trop flemmard pour l'avoir implémanté :-P
Etienne
> J'ai fait un truc bourrin mais sympa :
-> mon xorg.conf avec deux displayslayout
-> config de gdm pour qu'il lance systematiquement 2 serveurs X
- un pour un display "sur portable"
- un pour l autre layout, écran fixe seul
Et hop, Alt F7 / F8 selon ou je veux me logger.
> J'ai fait un truc bourrin mais sympa :
-> mon xorg.conf avec deux displayslayout
-> config de gdm pour qu'il lance systematiquement 2 serveurs X
- un pour un display "sur portable"
- un pour l autre layout, écran fixe seul
Et hop, Alt F7 / F8 selon ou je veux me logger.
> J'ai fait un truc bourrin mais sympa :
-> mon xorg.conf avec deux displayslayout
-> config de gdm pour qu'il lance systematiquement 2 serveurs X
- un pour un display "sur portable"
- un pour l autre layout, écran fixe seul
Et hop, Alt F7 / F8 selon ou je veux me logger.