[gentoo-user-fr] X, écran plat, nvisia, résolutions intermédiaires

Le
Pascal Ronecker
Coucou la liste,

pour faire simple : j'ai un écran "wide" 1680x1050, ouais ca marche trop
bien, cool.

J'aimerais l'utiliser de temps en temps à des résolutions
intermédiaires. (oui, pour jouer, j'ai pas une carte graphique de ouf
donc).

Donc, ni une ni deux, xorg.conf, que voici, avec les options que j'ai
tentées d'ajouter d'apres la doc nvidia.

Malgré ça, je n'arrive toujours a avoir de dispo que les reso 1680x1050
1280x1024 1024x768 800x600 640x480, soit disant à 75Hz alors que mon
panel fait que du 60.

J'y perds un peu mon latinX :-)

Dans la log je note
(WW) NVIDIA(0): Option "FlatPanelProperties" is not used


Section "Device"
# Insert Clocks lines here if appropriate
# Option "NoRenderAccel" "false"
# True disable the hardware accel, default false
Identifier "NvidiaCard"
Driver "nvidia"

Option "RenderAccel" "true"
Option "NoRenderExtension" "false"
Option "TripleBuffer" "true"
Option "NoLogo"
Option "NvAgp" "3"
# 1 pour agpgart, 2 pour nvagp, 3 pour tenter 1 puis 2, 0 desactive
Option "HWCursor" "true"
Option "CursorShadow" "true"
#flat panel
Option "FlatPanelProperties" "Scaling = aspect-scaled"
Option "UseEdidFreqs" "false"
Option "IgnoreEDID" "true"
EndSection

Section "Screen"

# Subsection "Display"
# Depth 24
# Modes "1280x1024" "1024x768" "800x600" "768x576" "640x480"
# ViewPort 0 0
# EndSubsection
Identifier "Screen 1"
Device "NvidiaCard"
Monitor "Samsung 205BW"
# Monitor "iiyama VisionMasterPro451"
DefaultDepth 24

SubSection "Display"

Viewport 0 0
Depth 24
Modes "1680x1050" "1280x1024" "1152x720" "1024x768"
"840x525" "800x600" "768x576" "640x480"
EndSubSection
EndSection





la log

(II) NVIDIA(0): Setting mode "1680x1050"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(WW) NVIDIA(0): Option "FlatPanelProperties" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
%--snip-%
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Keyboard1: XkbLayout: "fr"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type:
Other)
xkb_keycodes { include "xfree86+aliases(azerty)" };
xkb_keycodes { include "xfree86+aliases(azerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+fr" };
xkb_geometry { include "pc(pc105)" };
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
SetClientVersion: 0 9
SetKbdSettings - type: -1 rate: 30 delay: 500 snumlk: 0
xkb_types { include "%" };
xkb_compatibility { include "%" };
xkb_symbols { include "%" };
xkb_geometry { include "%" };
(EE) Error loading keymap /usr/share/X11/xkb/compiled/server-0.xkm
(II) NVIDIA(0): Setting mode "1024x768"
(II) NVIDIA(0): Setting mode "1680x1050"
(II) NVIDIA(0): Setting mode "1280x1024"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) NVIDIA(0): Setting mode "1680x1050"
(II) 3rd Button detected: disabling emulate3Button

--
gentoo-user-fr@gentoo.org mailing list
  • Partager ce contenu :
Vos réponses
Trier par : date / pertinence
Pascal Ronecker
Le #7825581
Ouais bon, vieille methodes les meilleures : calcul de modeline ...
et ca marche.

merci gtf

gtf 1152 720 60

# 1152x720 @ 60.00 Hz (GTF) hsync: 44.76 kHz; pclk: 67.32 MHz
Modeline "1152x720_60.00" 67.32 1152 1208 1328 1504 720 721 724 746
-HSync +Vsync


Pascal Ronecker wrote:
Coucou la liste,

pour faire simple : j'ai un écran "wide" 1680x1050, ouais ca marche trop
bien, cool.

J'aimerais l'utiliser de temps en temps à des résolutions
intermédiaires. (oui, pour jouer, j'ai pas une carte graphique de ouf
donc...).

Donc, ni une ni deux, xorg.conf, que voici, avec les options que j'ai
tentées d'ajouter d'apres la doc nvidia.

Malgré ça, je n'arrive toujours a avoir de dispo que les reso 1680x1050
1280x1024 1024x768 800x600 640x480, soit disant à 75Hz alors que mon
panel fait que du 60.

J'y perds un peu mon latinX :-)

Dans la log je note
(WW) NVIDIA(0): Option "FlatPanelProperties" is not used


Section "Device"
# Insert Clocks lines here if appropriate
# Option "NoRenderAccel" "false"
# True disable the hardware accel, default false
Identifier "NvidiaCard"
Driver "nvidia"

Option "RenderAccel" "true"
Option "NoRenderExtension" "false"
Option "TripleBuffer" "true"
Option "NoLogo"
Option "NvAgp" "3"
# 1 pour agpgart, 2 pour nvagp, 3 pour tenter 1 puis 2, 0 desactive
Option "HWCursor" "true"
Option "CursorShadow" "true"
#flat panel
Option "FlatPanelProperties" "Scaling = aspect-scaled"
Option "UseEdidFreqs" "false"
Option "IgnoreEDID" "true"
EndSection

Section "Screen"

# Subsection "Display"
# Depth 24
# Modes "1280x1024" "1024x768" "800x600" "768x576" "640x480"
# ViewPort 0 0
# EndSubsection
Identifier "Screen 1"
Device "NvidiaCard"
Monitor "Samsung 205BW"
# Monitor "iiyama VisionMasterPro451"
DefaultDepth 24

SubSection "Display"

Viewport 0 0
Depth 24
Modes "1680x1050" "1280x1024" "1152x720" "1024x768"
"840x525" "800x600" "768x576" "640x480"
EndSubSection
EndSection





la log

(II) NVIDIA(0): Setting mode "1680x1050"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(WW) NVIDIA(0): Option "FlatPanelProperties" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
%--snip----%
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "fr"
(**) Keyboard1: XkbLayout: "fr"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type:
Other)
xkb_keycodes { include "xfree86+aliases(azerty)" };
xkb_keycodes { include "xfree86+aliases(azerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+fr" };
xkb_geometry { include "pc(pc105)" };
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
SetClientVersion: 0 9
SetKbdSettings - type: -1 rate: 30 delay: 500 snumlk: 0
xkb_types { include "%" };
xkb_compatibility { include "%" };
xkb_symbols { include "%" };
xkb_geometry { include "%" };
(EE) Error loading keymap /usr/share/X11/xkb/compiled/server-0.xkm
(II) NVIDIA(0): Setting mode "1024x768"
(II) NVIDIA(0): Setting mode "1680x1050"
(II) NVIDIA(0): Setting mode "1280x1024"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) NVIDIA(0): Setting mode "1680x1050"
(II) 3rd Button detected: disabling emulate3Button

--
mailing list





--
mailing list
Etienne Hilson
Le #7825571
2007/1/18, Pascal Ronecker
Ouais bon, vieille methodes les meilleures : calcul de modeline ...
et ca marche.

merci gtf

gtf 1152 720 60

# 1152x720 @ 60.00 Hz (GTF) hsync: 44.76 kHz; pclk: 67.32 MHz
Modeline "1152x720_60.00" 67.32 1152 1208 1328 1504 720 721 724 746
-HSync +Vsync



Trop cool ! Je ne connaissais pas !
Merci !

Etienne
--
mailing list
Poster une réponse
Anonyme