J'ai un ptit problème pour graver des CDs. Voila j'utilise K3b fournit
avec mandrake, tout les paramètres par défaut et ça marche pas.
Voici ce que me renvoie K3b. (Ici j'ai essayé avec un RW parceque j'en
avait marre de tuer des cd-R pour rien)
System
-----------------------
K3b Version: 0.11.6cvs
KDE Version: 3.2 BRANCH >= 20040204
QT Version: 3.2.3
cdrecord
-----------------------
scsidev: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd'
devname: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
SCSI buffer size: 64512
Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8480B '
Revision : '1.03'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1582592 = 1545 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 235 MB
Total size: 270 MB (26:45.52) = 120414 sectors
Lout start: 270 MB (26:47/39) = 120414 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 48
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 239435
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 235 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 01 93 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 10.390s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 825344 bytes
Writing time: 26.519s
Average write speed 96.2x.
Fixating...
Fixating time: 0.001s
/usr/bin/cdrecord: fifo had 77 puts and 14 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 87%.
BURN-Free was never needed.
mkisofs
-----------------------
120414
0.42% done, estimate finish Mon Aug 23 23:06:19 2004
0.83% done, estimate finish Mon Aug 23 23:06:19 2004
1.25% done, estimate finish Mon Aug 23 23:06:19 2004
1.67% done, estimate finish Mon Aug 23 23:06:19 2004
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.6cvs (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.6cvs -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-benoit/k3bwsH1Gb.tmp -r -hide-list /tmp/kde-benoit/k3ba32iVb.tmp -l -iso-level 2 -path-list /tmp/kde-benoit/k3bzLx7Ka.tmp
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
pat
bebeuh a écrit :
J'ai un ptit problème pour graver des CDs. Voila j'utilise K3b fournit avec mandrake, tout les paramètres par défaut et ça marche pas. Voici ce que me renvoie K3b. (Ici j'ai essayé avec un RW parceque j'en avait marre de tuer des cd-R pour rien)
System ----------------------- K3b Version: 0.11.6cvs KDE Version: 3.2 BRANCH >= 20040204 QT Version: 3.2.3
cdrecord ----------------------- scsidev: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd' devname: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. SCSI buffer size: 64512 Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to . Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'CD-RW GCE-8480B ' Revision : '1.03' Device seems to be: Generic mmc CD-RW. Current: 0x000A Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 Profile: 0x0002 (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1582592 = 1545 KB FIFO size : 4194304 = 4096 KB Track 01: data 235 MB Total size: 270 MB (26:45.52) = 120414 sectors Lout start: 270 MB (26:47/39) = 120414 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 2 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -12900 (97:10/00) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 5 A1 values: 24 1A D8 A2 values: 26 B2 48 Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Manufacturer is unknown because of the orange forum embargo. As the orange forum likes to get money for recent information, it may be that this media does not use illegal manufacturer coding. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 239435 Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 235 MB written. /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 01 93 00 00 1F 00 status: 0x0 (GOOD STATUS) cmd finished after 10.390s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 825344 bytes Writing time: 26.519s Average write speed 96.2x. Fixating... Fixating time: 0.001s /usr/bin/cdrecord: fifo had 77 puts and 14 gets. /usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 87%. BURN-Free was never needed.
mkisofs ----------------------- 120414 0.42% done, estimate finish Mon Aug 23 23:06:19 2004 0.83% done, estimate finish Mon Aug 23 23:06:19 2004 1.25% done, estimate finish Mon Aug 23 23:06:19 2004 1.67% done, estimate finish Mon Aug 23 23:06:19 2004 /usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.6cvs (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.6cvs -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-benoit/k3bwsH1Gb.tmp -r -hide-list /tmp/kde-benoit/k3ba32iVb.tmp -l -iso-level 2 -path-list /tmp/kde-benoit/k3bzLx7Ka.tmp
à mon avis tu dois changer le repertoir temporaire dans la cofiguration ,cofigurer K3b ,divers le dosier par defaut est trop petit ou pas de droit d'acces
bebeuh a écrit :
J'ai un ptit problème pour graver des CDs. Voila j'utilise K3b fournit
avec mandrake, tout les paramètres par défaut et ça marche pas.
Voici ce que me renvoie K3b. (Ici j'ai essayé avec un RW parceque j'en
avait marre de tuer des cd-R pour rien)
System
-----------------------
K3b Version: 0.11.6cvs
KDE Version: 3.2 BRANCH >= 20040204
QT Version: 3.2.3
cdrecord
-----------------------
scsidev: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd'
devname: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
SCSI buffer size: 64512
Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8480B '
Revision : '1.03'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1582592 = 1545 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 235 MB
Total size: 270 MB (26:45.52) = 120414 sectors
Lout start: 270 MB (26:47/39) = 120414 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 48
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 239435
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 235 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 01 93 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 10.390s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 825344 bytes
Writing time: 26.519s
Average write speed 96.2x.
Fixating...
Fixating time: 0.001s
/usr/bin/cdrecord: fifo had 77 puts and 14 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 87%.
BURN-Free was never needed.
mkisofs
-----------------------
120414
0.42% done, estimate finish Mon Aug 23 23:06:19 2004
0.83% done, estimate finish Mon Aug 23 23:06:19 2004
1.25% done, estimate finish Mon Aug 23 23:06:19 2004
1.67% done, estimate finish Mon Aug 23 23:06:19 2004
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.6cvs (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.6cvs -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-benoit/k3bwsH1Gb.tmp -r -hide-list /tmp/kde-benoit/k3ba32iVb.tmp -l -iso-level 2 -path-list /tmp/kde-benoit/k3bzLx7Ka.tmp
à mon avis tu dois changer le repertoir temporaire dans la cofiguration
,cofigurer K3b ,divers le dosier par defaut est trop petit ou pas de
droit d'acces
J'ai un ptit problème pour graver des CDs. Voila j'utilise K3b fournit avec mandrake, tout les paramètres par défaut et ça marche pas. Voici ce que me renvoie K3b. (Ici j'ai essayé avec un RW parceque j'en avait marre de tuer des cd-R pour rien)
System ----------------------- K3b Version: 0.11.6cvs KDE Version: 3.2 BRANCH >= 20040204 QT Version: 3.2.3
cdrecord ----------------------- scsidev: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd' devname: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. SCSI buffer size: 64512 Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to . Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'CD-RW GCE-8480B ' Revision : '1.03' Device seems to be: Generic mmc CD-RW. Current: 0x000A Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 Profile: 0x0002 (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1582592 = 1545 KB FIFO size : 4194304 = 4096 KB Track 01: data 235 MB Total size: 270 MB (26:45.52) = 120414 sectors Lout start: 270 MB (26:47/39) = 120414 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 2 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -12900 (97:10/00) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 5 A1 values: 24 1A D8 A2 values: 26 B2 48 Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Manufacturer is unknown because of the orange forum embargo. As the orange forum likes to get money for recent information, it may be that this media does not use illegal manufacturer coding. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 239435 Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 235 MB written. /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 01 93 00 00 1F 00 status: 0x0 (GOOD STATUS) cmd finished after 10.390s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 825344 bytes Writing time: 26.519s Average write speed 96.2x. Fixating... Fixating time: 0.001s /usr/bin/cdrecord: fifo had 77 puts and 14 gets. /usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 87%. BURN-Free was never needed.
mkisofs ----------------------- 120414 0.42% done, estimate finish Mon Aug 23 23:06:19 2004 0.83% done, estimate finish Mon Aug 23 23:06:19 2004 1.25% done, estimate finish Mon Aug 23 23:06:19 2004 1.67% done, estimate finish Mon Aug 23 23:06:19 2004 /usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.6cvs (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.6cvs -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-benoit/k3bwsH1Gb.tmp -r -hide-list /tmp/kde-benoit/k3ba32iVb.tmp -l -iso-level 2 -path-list /tmp/kde-benoit/k3bzLx7Ka.tmp
à mon avis tu dois changer le repertoir temporaire dans la cofiguration ,cofigurer K3b ,divers le dosier par defaut est trop petit ou pas de droit d'acces
bebeuh
Ca n'a pas l'air de marcher, j'ai changer les répertoires et toujours le même problème.
Ca n'a pas l'air de marcher, j'ai changer les répertoires et toujours le
même problème.
scsidev: 'ATAPI:0,1,0' devname: 'ATAPI' scsibus: 0 target: 1 lun: 0 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. SCSI buffer size: 64512 Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to . Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Waiting for data on stdin... Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'CD-RW GCE-8480B ' Revision : '1.03' Device seems to be: Generic mmc CD-RW. Current: 0x000A Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 Profile: 0x0002 (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1582592 = 1545 KB FIFO size : 4194304 = 4096 KB Track 01: data 106 MB padsize: 30 KB Total size: 122 MB (12:05.96) = 54447 sectors Lout start: 122 MB (12:07/72) = 54447 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 2 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -12900 (97:10/00) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 5 A1 values: 24 1A D8 A2 values: 26 B2 48 Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Manufacturer is unknown because of the orange forum embargo. As the orange forum likes to get money for recent information, it may be that this media does not use illegal manufacturer coding. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 305402 Starting to write CD/DVD at speed 12.0 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 01 93 00 00 1F 00 status: 0x0 (GOOD STATUS) cmd finished after 10.269s timeout 200s cdrecord: A write error occured. cdrecord: Please properly read the error message above.
write track data: error after 825344 bytes Writing time: 23.429s Average write speed 44.0x. Fixating... Fixating time: 2.010s BURN-Free was never needed. cdrecord: fifo had 77 puts and 14 gets. cdrecord: fifo was 0 times empty and 1 times full, min fill was 79%.
Le Tue, 24 Aug 2004 17:33:51 +0200, Claude Samyn a écrit :
bebeuh wrote:
Ca n'a pas l'air de marcher, j'ai changer les répertoires et toujours le
même problème.
T'inquiètes pas, j'ai abandonné K3B, il n'a jamais marché (plantage pur
et simple).
--
Bah oui mais avec cdroast ca ne marche pas non plus !!! voila ce que
j'obtiens:
scsidev: 'ATAPI:0,1,0'
devname: 'ATAPI'
scsibus: 0 target: 1 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
SCSI buffer size: 64512
Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Waiting for data on stdin...
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8480B '
Revision : '1.03'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1582592 = 1545 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 106 MB padsize: 30 KB
Total size: 122 MB (12:05.96) = 54447 sectors
Lout start: 122 MB (12:07/72) = 54447 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 48
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 305402
Starting to write CD/DVD at speed 12.0 in real SAO mode for single session.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 01 93 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 10.269s timeout 200s
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
write track data: error after 825344 bytes
Writing time: 23.429s
Average write speed 44.0x.
Fixating...
Fixating time: 2.010s
BURN-Free was never needed.
cdrecord: fifo had 77 puts and 14 gets.
cdrecord: fifo was 0 times empty and 1 times full, min fill was 79%.
scsidev: 'ATAPI:0,1,0' devname: 'ATAPI' scsibus: 0 target: 1 lun: 0 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. SCSI buffer size: 64512 Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to . Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Waiting for data on stdin... Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'CD-RW GCE-8480B ' Revision : '1.03' Device seems to be: Generic mmc CD-RW. Current: 0x000A Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 Profile: 0x0002 (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1582592 = 1545 KB FIFO size : 4194304 = 4096 KB Track 01: data 106 MB padsize: 30 KB Total size: 122 MB (12:05.96) = 54447 sectors Lout start: 122 MB (12:07/72) = 54447 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 2 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -12900 (97:10/00) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 5 A1 values: 24 1A D8 A2 values: 26 B2 48 Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Manufacturer is unknown because of the orange forum embargo. As the orange forum likes to get money for recent information, it may be that this media does not use illegal manufacturer coding. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 305402 Starting to write CD/DVD at speed 12.0 in real SAO mode for single session. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 01 93 00 00 1F 00 status: 0x0 (GOOD STATUS) cmd finished after 10.269s timeout 200s cdrecord: A write error occured. cdrecord: Please properly read the error message above.
write track data: error after 825344 bytes Writing time: 23.429s Average write speed 44.0x. Fixating... Fixating time: 2.010s BURN-Free was never needed. cdrecord: fifo had 77 puts and 14 gets. cdrecord: fifo was 0 times empty and 1 times full, min fill was 79%.
Hervé Riboulot
Le Mon, 23 Aug 2004 23:10:59 +0200, bebeuh a écrit :
J'ai un ptit problème pour graver des CDs. Voila j'utilise K3b fournit avec mandrake, tout les paramètres par défaut et ça marche pas. Voici ce que me renvoie K3b. (Ici j'ai essayé avec un RW parceque j'en avait marre de tuer des cd-R pour rien)
System ----------------------- K3b Version: 0.11.6cvs KDE Version: 3.2 BRANCH >= 20040204 QT Version: 3.2.3
cdrecord ----------------------- scsidev: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd' devname: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. SCSI buffer size: 64512 Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to . Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'CD-RW GCE-8480B ' Revision : '1.03' Device seems to be: Generic mmc CD-RW. Current: 0x000A Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 Profile: 0x0002 (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1582592 = 1545 KB FIFO size : 4194304 = 4096 KB Track 01: data 235 MB Total size: 270 MB (26:45.52) = 120414 sectors Lout start: 270 MB (26:47/39) = 120414 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 2 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -12900 (97:10/00) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 5 A1 values: 24 1A D8 A2 values: 26 B2 48 Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Manufacturer is unknown because of the orange forum embargo. As the orange forum likes to get money for recent information, it may be that this media does not use illegal manufacturer coding. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 239435 Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 235 MB written. /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 01 93 00 00 1F 00 status: 0x0 (GOOD STATUS) cmd finished after 10.390s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 825344 bytes Writing time: 26.519s Average write speed 96.2x. Fixating... Fixating time: 0.001s /usr/bin/cdrecord: fifo had 77 puts and 14 gets. /usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 87%. BURN-Free was never needed.
mkisofs ----------------------- 120414 0.42% done, estimate finish Mon Aug 23 23:06:19 2004 0.83% done, estimate finish Mon Aug 23 23:06:19 2004 1.25% done, estimate finish Mon Aug 23 23:06:19 2004 1.67% done, estimate finish Mon Aug 23 23:06:19 2004 /usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.6cvs (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.6cvs -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-benoit/k3bwsH1Gb.tmp -r -hide-list /tmp/kde-benoit/k3ba32iVb.tmp -l -iso-level 2 -path-list /tmp/kde-benoit/k3bzLx7Ka.tmp
Il semble donc que le lecteur soit en interface scsi et soit employé sur un noyau 2.6.
Toutefois, le lecteur apparaît traité comme un lecteur en interface IDE (ATAPI).
La lecture de l'article suivant apportera quelques informations:
http://www.mandrakeclub.com/article.php?sid83
Pour corriger le pb, il faut paramétrer k3b en déclarant correctement les paramètres scsi (pour identifier ces paramètres, lancer cdrecord -scanbus; pour vérifier que le support scsi est bien assuré, faire un lsmod et rechercher les modules adhoc chargé).
Le Mon, 23 Aug 2004 23:10:59 +0200, bebeuh a écrit :
J'ai un ptit problème pour graver des CDs. Voila j'utilise K3b fournit
avec mandrake, tout les paramètres par défaut et ça marche pas.
Voici ce que me renvoie K3b. (Ici j'ai essayé avec un RW parceque j'en
avait marre de tuer des cd-R pour rien)
System
-----------------------
K3b Version: 0.11.6cvs
KDE Version: 3.2 BRANCH >= 20040204
QT Version: 3.2.3
cdrecord
-----------------------
scsidev: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd'
devname: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
SCSI buffer size: 64512
Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8480B '
Revision : '1.03'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1582592 = 1545 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 235 MB
Total size: 270 MB (26:45.52) = 120414 sectors
Lout start: 270 MB (26:47/39) = 120414 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 2
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -12900 (97:10/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 48
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Manufacturer is unknown because of the orange forum embargo.
As the orange forum likes to get money for recent information,
it may be that this media does not use illegal manufacturer coding.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 239435
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 235 MB written.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 01 93 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 10.390s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 825344 bytes
Writing time: 26.519s
Average write speed 96.2x.
Fixating...
Fixating time: 0.001s
/usr/bin/cdrecord: fifo had 77 puts and 14 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 87%.
BURN-Free was never needed.
mkisofs
-----------------------
120414
0.42% done, estimate finish Mon Aug 23 23:06:19 2004
0.83% done, estimate finish Mon Aug 23 23:06:19 2004
1.25% done, estimate finish Mon Aug 23 23:06:19 2004
1.67% done, estimate finish Mon Aug 23 23:06:19 2004
/usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.6cvs (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.6cvs -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-benoit/k3bwsH1Gb.tmp -r -hide-list /tmp/kde-benoit/k3ba32iVb.tmp -l -iso-level 2 -path-list /tmp/kde-benoit/k3bzLx7Ka.tmp
Il semble donc que le lecteur soit en interface scsi et soit employé sur
un noyau 2.6.
Toutefois, le lecteur apparaît traité comme un lecteur en interface IDE
(ATAPI).
La lecture de l'article suivant apportera quelques informations:
http://www.mandrakeclub.com/article.php?sid83
Pour corriger le pb, il faut paramétrer k3b en déclarant correctement
les paramètres scsi (pour identifier ces paramètres, lancer cdrecord
-scanbus; pour vérifier que le support scsi est bien assuré, faire un
lsmod et rechercher les modules adhoc chargé).
Le Mon, 23 Aug 2004 23:10:59 +0200, bebeuh a écrit :
J'ai un ptit problème pour graver des CDs. Voila j'utilise K3b fournit avec mandrake, tout les paramètres par défaut et ça marche pas. Voici ce que me renvoie K3b. (Ici j'ai essayé avec un RW parceque j'en avait marre de tuer des cd-R pour rien)
System ----------------------- K3b Version: 0.11.6cvs KDE Version: 3.2 BRANCH >= 20040204 QT Version: 3.2.3
cdrecord ----------------------- scsidev: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd' devname: 'ATAPI:/dev/ide/host0/bus0/target1/lun0/cd' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Warning: There may be fatal problems. SCSI buffer size: 64512 Cdrecord-Clone 2.01a26-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to . Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'CD-RW GCE-8480B ' Revision : '1.03' Device seems to be: Generic mmc CD-RW. Current: 0x000A Profile: 0x000A (current) Profile: 0x0009 Profile: 0x0008 Profile: 0x0002 (current) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1582592 = 1545 KB FIFO size : 4194304 = 4096 KB Track 01: data 235 MB Total size: 270 MB (26:45.52) = 120414 sectors Lout start: 270 MB (26:47/39) = 120414 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 2 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -12900 (97:10/00) ATIP start of lead out: 359849 (79:59/74) 1T speed low: 4 1T speed high: 10 2T speed low: 4 2T speed high: 0 (reserved val 6) power mult factor: 1 5 recommended erase/write power: 5 A1 values: 24 1A D8 A2 values: 26 B2 48 Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Manufacturer is unknown because of the orange forum embargo. As the orange forum likes to get money for recent information, it may be that this media does not use illegal manufacturer coding. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 239435 Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... /usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 235 MB written. /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 01 93 00 00 1F 00 status: 0x0 (GOOD STATUS) cmd finished after 10.390s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 825344 bytes Writing time: 26.519s Average write speed 96.2x. Fixating... Fixating time: 0.001s /usr/bin/cdrecord: fifo had 77 puts and 14 gets. /usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 87%. BURN-Free was never needed.
mkisofs ----------------------- 120414 0.42% done, estimate finish Mon Aug 23 23:06:19 2004 0.83% done, estimate finish Mon Aug 23 23:06:19 2004 1.25% done, estimate finish Mon Aug 23 23:06:19 2004 1.67% done, estimate finish Mon Aug 23 23:06:19 2004 /usr/bin/mkisofs: Connection reset by peer. cannot fwrite 32768*1
mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11.6cvs (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11.6cvs -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-benoit/k3bwsH1Gb.tmp -r -hide-list /tmp/kde-benoit/k3ba32iVb.tmp -l -iso-level 2 -path-list /tmp/kde-benoit/k3bzLx7Ka.tmp
Il semble donc que le lecteur soit en interface scsi et soit employé sur un noyau 2.6.
Toutefois, le lecteur apparaît traité comme un lecteur en interface IDE (ATAPI).
La lecture de l'article suivant apportera quelques informations:
http://www.mandrakeclub.com/article.php?sid83
Pour corriger le pb, il faut paramétrer k3b en déclarant correctement les paramètres scsi (pour identifier ces paramètres, lancer cdrecord -scanbus; pour vérifier que le support scsi est bien assuré, faire un lsmod et rechercher les modules adhoc chargé).
bebeuh
> Il semble donc que le lecteur soit en interface scsi et soit employé sur un noyau 2.6.
Toutefois, le lecteur apparaît traité comme un lecteur en interface IDE (ATAPI).
La lecture de l'article suivant apportera quelques informations:
http://www.mandrakeclub.com/article.php?sid83
Pour corriger le pb, il faut paramétrer k3b en déclarant correctement les paramètres scsi (pour identifier ces paramètres, lancer cdrecord -scanbus; pour vérifier que le support scsi est bien assuré, faire un lsmod et rechercher les modules adhoc chargé).
Merci maintenant ca marche du feu de dieu en fait j'ai juste mis a jour le kernel et pouf plus de problèmes.
> Il semble donc que le lecteur soit en interface scsi et soit employé sur
un noyau 2.6.
Toutefois, le lecteur apparaît traité comme un lecteur en interface IDE
(ATAPI).
La lecture de l'article suivant apportera quelques informations:
http://www.mandrakeclub.com/article.php?sid83
Pour corriger le pb, il faut paramétrer k3b en déclarant correctement
les paramètres scsi (pour identifier ces paramètres, lancer cdrecord
-scanbus; pour vérifier que le support scsi est bien assuré, faire un
lsmod et rechercher les modules adhoc chargé).
Merci maintenant ca marche du feu de dieu en fait j'ai juste mis a jour le
kernel et pouf plus de problèmes.
> Il semble donc que le lecteur soit en interface scsi et soit employé sur un noyau 2.6.
Toutefois, le lecteur apparaît traité comme un lecteur en interface IDE (ATAPI).
La lecture de l'article suivant apportera quelques informations:
http://www.mandrakeclub.com/article.php?sid83
Pour corriger le pb, il faut paramétrer k3b en déclarant correctement les paramètres scsi (pour identifier ces paramètres, lancer cdrecord -scanbus; pour vérifier que le support scsi est bien assuré, faire un lsmod et rechercher les modules adhoc chargé).
Merci maintenant ca marche du feu de dieu en fait j'ai juste mis a jour le kernel et pouf plus de problèmes.
