Sur mon portable Acer Aspire 1700 (1705SMI), il y a un graveur de DVD
Matshita UJ-811 que je n'arrive pas à utiliser sous Linux (Mandrake
9.2 ou Knoppix 3.2). La lecture fonctionne bien, mais aucune écriture
possible sur CD-R, CD-RW ou DVD+/-RW.
Tout est bien installé : cdrecord, mkisofs, cdrdao, mais que ce soit
avec xcdroast ou k3b, toute tentative de gravure plante. Le plus
râlant, c'est que tout fonctionne bien sous Windaube XP. Dur dans ces
conditions de convertir aux logiciels libres les dubitatifs qui
m'entourent.
Voici quelques données :
# cdrecord -scanbus
Cdrecord-Clone 2.01a18-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2003
Jörg Schilling
Note: This version is an unofficial (modified) version with DVD
support
Note: and therefore may have bugs that are not present in the
original.
Note: Please send bug reports or support requests to
<warly@mandrakesoft.com>.
Note: The author of cdrecord is not to be bothered with problems in
this version.
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'MATSHITA' 'DVD-RAM UJ-811 ' 'H101' Removable
CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
et avec un CD-RW ou un CD-R vierge inséré :
# cdrecord dev=0,0,0 -toc
[...]
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identifikation : 'DVD-RAM UJ-811 '
Revision : 'H101'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO
cdrecord: Input/output error. read toc: scsi sendcmd: no error
CDB: 43 00 00 00 00 00 00 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.007s timeout 40s
cdrecord: Cannot read TOC header
cdrecord: Cannot read TOC/PMA
J'ai eu beau chercher depuis plus d'un mois, je n'ai rien trouvé.
Merci de votre aide !
3°) # cdrecord -v dev=0,0,0 essai.iso Cdrecord-Clone 2.01a20-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to . Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.25 Using libscg version 'schily-0.7' SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'MATSHITA' Identifikation : 'DVD-RAM UJ-811 ' Revision : 'H101' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x0012 Profile: 0x0013 Profile: 0x0014 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 Profile: 0x0002 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO Drive buf size : 1343488 = 1312 KB FIFO size : 4194304 = 4096 KB Track 01: data 57 MB Total size: 66 MB (06:35.26) = 29645 sectors Lout start: 66 MB (06:37/20) = 29645 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11077 (97:34/23) ATIP start of lead out: 359848 (79:59/73) Disk type: Long strategy type (Cyanine, AZO or similar) Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Blocks total: 359848 Blocks current: 359848 Blocks remaining: 330203 Starting to write CD/DVD at speed 16.0 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. Turning BURN-Free off Performing OPC... Starting new track at sector: 0 Track 01: 57 of 57 MB written (fifo 100%) [buf 98%] 0.9x. Track 01: Total bytes read/written: 60708864/60708864 (29643 sectors). Writing time: 58.376s Average write speed 0.8x. Min drive buffer fill was 97% Fixating... Fixating time: 31.955s cdrecord: fifo had 957 puts and 957 gets. cdrecord: fifo was 0 times empty and 874 times full, min fill was 81%.
Tout va bien ! Mis à part la vitesse de gravure. Je vais tester davantage. Merci à Geaorge.
Claudiux
Ayéééé !
Je peux enfin graver avec mon Matshita UJ-811. Il suffisait d'attendre
la nouvelle version de cdrecord :
3°) # cdrecord -v dev=0,0,0 essai.iso
Cdrecord-Clone 2.01a20-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2003
Jörg Schilling
Note: This version is an unofficial (modified) version with DVD
support
Note: and therefore may have bugs that are not present in the
original.
Note: Please send bug reports or support requests to
<warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identifikation : 'DVD-RAM UJ-811 '
Revision : 'H101'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x0012
Profile: 0x0013
Profile: 0x0014
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO
Drive buf size : 1343488 = 1312 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 57 MB
Total size: 66 MB (06:35.26) = 29645 sectors
Lout start: 66 MB (06:37/20) = 29645 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 330203
Starting to write CD/DVD at speed 16.0 in real TAO mode for single
session.
Last chance to quit, starting real write 0 seconds. Operation
starts.
Waiting for reader process to fill input buffer ... input buffer
ready.
trackno=0
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01: 57 of 57 MB written (fifo 100%) [buf 98%] 0.9x.
Track 01: Total bytes read/written: 60708864/60708864 (29643 sectors).
Writing time: 58.376s
Average write speed 0.8x.
Min drive buffer fill was 97%
Fixating...
Fixating time: 31.955s
cdrecord: fifo had 957 puts and 957 gets.
cdrecord: fifo was 0 times empty and 874 times full, min fill was 81%.
Tout va bien ! Mis à part la vitesse de gravure. Je vais tester
davantage.
Merci à Geaorge.
3°) # cdrecord -v dev=0,0,0 essai.iso Cdrecord-Clone 2.01a20-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to . Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.25 Using libscg version 'schily-0.7' SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'MATSHITA' Identifikation : 'DVD-RAM UJ-811 ' Revision : 'H101' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x0012 Profile: 0x0013 Profile: 0x0014 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A Profile: 0x0009 (current) Profile: 0x0008 Profile: 0x0002 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO Drive buf size : 1343488 = 1312 KB FIFO size : 4194304 = 4096 KB Track 01: data 57 MB Total size: 66 MB (06:35.26) = 29645 sectors Lout start: 66 MB (06:37/20) = 29645 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11077 (97:34/23) ATIP start of lead out: 359848 (79:59/73) Disk type: Long strategy type (Cyanine, AZO or similar) Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Blocks total: 359848 Blocks current: 359848 Blocks remaining: 330203 Starting to write CD/DVD at speed 16.0 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. Turning BURN-Free off Performing OPC... Starting new track at sector: 0 Track 01: 57 of 57 MB written (fifo 100%) [buf 98%] 0.9x. Track 01: Total bytes read/written: 60708864/60708864 (29643 sectors). Writing time: 58.376s Average write speed 0.8x. Min drive buffer fill was 97% Fixating... Fixating time: 31.955s cdrecord: fifo had 957 puts and 957 gets. cdrecord: fifo was 0 times empty and 874 times full, min fill was 81%.
Tout va bien ! Mis à part la vitesse de gravure. Je vais tester davantage. Merci à Geaorge.
