graveur SCSI

Begoua

16/01/2004 à 21:09

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver avec
tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier sga - sgh n'existe pas quand je fais ls du repertoire /dev.
est-ce la source du probleme? que dois-faire?
merci d'avance

pour le creer, je me connecte sous root dans un terminal et en tapant bash>
./MAKEDEV sg, j'obtiens bash: ./MAKEDEV: Permission denied.
que faire?

Begoua

16/01/2004 à 21:24

On Fri, 16 Jan 2004 15:09:20 +0000, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver avec
tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier sga - sgh n'existe pas quand je fais ls du repertoire /dev.
est-ce la source du probleme? que dois-faire?
merci d'avance

pour le creer, je me connecte sous root dans un terminal et en tapant bash>
./MAKEDEV sg, j'obtiens bash: ./MAKEDEV: Permission denied.
que faire?

j'essaie toujours mais rien a faire. concernant le module qui gere les
peripheriques SCSI, le fichier fichier /proc/devices n'existe pas. faut-il
le creer?

Rakotomandimby

16/01/2004 à 21:32

Begoua wrote:

On Fri, 16 Jan 2004 15:09:20 +0000, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver
avec tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier
sga - sgh n'existe pas quand je fais ls du repertoire /dev. est-ce la
source du probleme? que dois-faire? merci d'avance

pour le creer, je me connecte sous root dans un terminal et en tapant
bash> ./MAKEDEV sg, j'obtiens bash: ./MAKEDEV: Permission denied.
que faire?

j'essaie toujours mais rien a faire. concernant le module qui gere les
peripheriques SCSI, le fichier fichier /proc/devices n'existe pas. faut-il
le creer?

donne nous le contenu de /etc/lilo.conf
et aussi la sortie de lsmod
et aussi /etc/modules.conf ( pour savoir si il dit de charger les modules au
demarrage )

si tes modumes ide-scsi , ou ide-cd ou des trucs dans le genre ne sont pas
chargés , c'est normal que tu n'aie rien .
--
http://mrakotom.free.fr

Begoua

16/01/2004 à 21:49

On Fri, 16 Jan 2004 21:32:56 +0100, Rakotomandimby wrote:

Begoua wrote:

On Fri, 16 Jan 2004 15:09:20 +0000, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver
avec tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier
sga - sgh n'existe pas quand je fais ls du repertoire /dev. est-ce la
source du probleme? que dois-faire? merci d'avance

pour le creer, je me connecte sous root dans un terminal et en tapant
bash> ./MAKEDEV sg, j'obtiens bash: ./MAKEDEV: Permission denied.
que faire?

j'essaie toujours mais rien a faire. concernant le module qui gere les
peripheriques SCSI, le fichier fichier /proc/devices n'existe pas. faut-il
le creer?

donne nous le contenu de /etc/lilo.conf
et aussi la sortie de lsmod
et aussi /etc/modules.conf ( pour savoir si il dit de charger les modules au
demarrage )

si tes modumes ide-scsi , ou ide-cd ou des trucs dans le genre ne sont pas
chargés , c'est normal que tu n'aie rien .

voici les données:

/etc/lilo.conf

boot=/dev/hda
map=/boot/map
vga=normal
default=linux
keytable=/boot/qc-latin1.klt
prompt
nowarn
timeout000
message=/boot/message
menu-scheme=wb:bw:wb:bw
ignore-table
image=/boot/vmlinuz
label=linux
root=/dev/hda6
initrd=/boot/initrd.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
label=linux-nonfb
root=/dev/hda6
initrd=/boot/initrd.img
append="devfs=mount hdc=ide-scsi"
read-only
other=/dev/hda4
label=NT
table=/dev/hda
other=/dev/fd0
label=floppy
unsafe
image=/boot/vmlinuz-2.4.19-16mdk
label=old_linux
root=/dev/hda6
initrd=/boot/initrd-2.4.19-16mdk.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
labelúilsafe
root=/dev/hda6
initrd=/boot/initrd.img
append="failsafe devfs=nomount hdc=ide-scsi"
read-only
other=/dev/hda4
label=old_NT
table=/dev/hda

ls mod

Module Size Used by Tainted: P
isofs 25652 0 (autoclean)
inflate_fs 17892 0 (autoclean) [isofs]
sg 31276 0 (autoclean)
lp 6720 0 (unused)
parport_pc 21672 1
parport 23936 1 [lp parport_pc]
binfmt_misc 5696 1
ppp_async 7456 0 (autoclean) (unused)
ppp_generic 20064 0 (autoclean) [ppp_async]
sr_mod 15096 0 (autoclean)
floppy 49340 0 (autoclean)
autofs4 9340 2 (autoclean)
nfs 67328 1 (autoclean)
appletalk 21668 12 (autoclean)
tap0 3044 1 (autoclean)
ipsec 242688 2
radeon 75736 1
agpgart 31840 3 (autoclean)
ipt_TOS 984 12 (autoclean)
ipt_LOG 3384 5 (autoclean)
ipt_REJECT 2744 4 (autoclean)
ipt_state 568 8 (autoclean)
iptable_mangle 2072 1 (autoclean)
ip_nat_irc 2384 0 (unused)
ip_nat_ftp 2992 0 (unused)
iptable_nat 15224 2 [ip_nat_irc ip_nat_ftp]
ip_conntrack_irc 3056 1
ip_conntrack_ftp 3952 1
ip_conntrack 18400 4 [ipt_state ip_nat_irc ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_ftp]
iptable_filter 1644 1 (autoclean)
ip_tables 11672 9 [ipt_TOS ipt_LOG ipt_REJECT ipt_state iptable_mangle iptable_nat iptable_filter]
snd-seq-oss 26176 0 (unused)
snd-seq-midi-event 3208 0 [snd-seq-oss]
snd-seq 33264 2 [snd-seq-oss snd-seq-midi-event]
snd-seq-device 3836 0 [snd-seq-oss snd-seq]
snd-pcm-oss 36932 0
snd-mixer-oss 9016 0 [snd-pcm-oss]
snd-via8233 5772 0
snd-ac97-codec 25508 0 [snd-via8233]
snd-pcm 55808 0 [snd-pcm-oss snd-via8233]
snd-timer 9964 0 [snd-seq snd-pcm]
snd 24804 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-seq-device snd-pcm-oss snd-mixer-oss snd-via8233 snd-ac97-codec snd-pcm snd-timer]
soundcore 3780 0 [snd]
nfsd 66576 0 (autoclean)
lockd 46480 1 (autoclean) [nfs nfsd]
sunrpc 60188 1 (autoclean) [nfs nfsd lockd]
af_packet 13000 8 (autoclean)
hisax 444324 0 (unused)
isdn 123744 0 [hisax]
slhc 5072 0 [ppp_generic isdn]
ip_vs 74328 0 (autoclean)
8139too 14472 1 (autoclean)
mii 1152 0 (autoclean) [8139too]
nls_iso8859-15 3356 2 (autoclean)
ntfs 72908 2 (autoclean)
supermount 14340 3 (autoclean)
ide-cd 28712 0
cdrom 26848 0 [sr_mod ide-cd]
ide-scsi 8212 0
scsi_mod 90372 3 [sg sr_mod ide-scsi]
rtc 6560 0 (autoclean)
ext3 74004 2
jbd 38452 2 [ext3]

et /etc/modules.conf

alias autofs autofs4
probeall scsi_hostadapter ide-scsi
alias sound-slot-1 snd-via8233
alias eth0 8139too
alias sound-slot-0 cs4281
above snd-via8233 snd-pcm-oss
above snd-cs4281 snd-pcm-oss
alias sound cs4281
add below cs4281 ac97
alias net-pf-4 ipx
alias tap0 ethertap
options tap0 -o tap0 unit=0

merci

On Fri, 16 Jan 2004 21:32:56 +0100, Rakotomandimby wrote:

Begoua wrote:

On Fri, 16 Jan 2004 15:09:20 +0000, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver
avec tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier
sga - sgh n'existe pas quand je fais ls du repertoire /dev. est-ce la
source du probleme? que dois-faire? merci d'avance

pour le creer, je me connecte sous root dans un terminal et en tapant
bash> ./MAKEDEV sg, j'obtiens bash: ./MAKEDEV: Permission denied.
que faire?

j'essaie toujours mais rien a faire. concernant le module qui gere les
peripheriques SCSI, le fichier fichier /proc/devices n'existe pas. faut-il
le creer?

donne nous le contenu de /etc/lilo.conf
et aussi la sortie de lsmod
et aussi /etc/modules.conf ( pour savoir si il dit de charger les modules au
demarrage )

si tes modumes ide-scsi , ou ide-cd ou des trucs dans le genre ne sont pas
chargés , c'est normal que tu n'aie rien .

voici les données:

/etc/lilo.conf

boot=/dev/hda
map=/boot/map
vga=normal
default=linux
keytable=/boot/qc-latin1.klt
prompt
nowarn
timeout000
message=/boot/message
menu-scheme=wb:bw:wb:bw
ignore-table
image=/boot/vmlinuz
label=linux
root=/dev/hda6
initrd=/boot/initrd.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
label=linux-nonfb
root=/dev/hda6
initrd=/boot/initrd.img
append="devfs=mount hdc=ide-scsi"
read-only
other=/dev/hda4
label=NT
table=/dev/hda
other=/dev/fd0
label=floppy
unsafe
image=/boot/vmlinuz-2.4.19-16mdk
label=old_linux
root=/dev/hda6
initrd=/boot/initrd-2.4.19-16mdk.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
labelúilsafe
root=/dev/hda6
initrd=/boot/initrd.img
append="failsafe devfs=nomount hdc=ide-scsi"
read-only
other=/dev/hda4
label=old_NT
table=/dev/hda

ls mod

Module Size Used by Tainted: P
isofs 25652 0 (autoclean)
inflate_fs 17892 0 (autoclean) [isofs]
sg 31276 0 (autoclean)
lp 6720 0 (unused)
parport_pc 21672 1
parport 23936 1 [lp parport_pc]
binfmt_misc 5696 1
ppp_async 7456 0 (autoclean) (unused)
ppp_generic 20064 0 (autoclean) [ppp_async]
sr_mod 15096 0 (autoclean)
floppy 49340 0 (autoclean)
autofs4 9340 2 (autoclean)
nfs 67328 1 (autoclean)
appletalk 21668 12 (autoclean)
tap0 3044 1 (autoclean)
ipsec 242688 2
radeon 75736 1
agpgart 31840 3 (autoclean)
ipt_TOS 984 12 (autoclean)
ipt_LOG 3384 5 (autoclean)
ipt_REJECT 2744 4 (autoclean)
ipt_state 568 8 (autoclean)
iptable_mangle 2072 1 (autoclean)
ip_nat_irc 2384 0 (unused)
ip_nat_ftp 2992 0 (unused)
iptable_nat 15224 2 [ip_nat_irc ip_nat_ftp]
ip_conntrack_irc 3056 1
ip_conntrack_ftp 3952 1
ip_conntrack 18400 4 [ipt_state ip_nat_irc ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_ftp]
iptable_filter 1644 1 (autoclean)
ip_tables 11672 9 [ipt_TOS ipt_LOG ipt_REJECT ipt_state iptable_mangle iptable_nat iptable_filter]
snd-seq-oss 26176 0 (unused)
snd-seq-midi-event 3208 0 [snd-seq-oss]
snd-seq 33264 2 [snd-seq-oss snd-seq-midi-event]
snd-seq-device 3836 0 [snd-seq-oss snd-seq]
snd-pcm-oss 36932 0
snd-mixer-oss 9016 0 [snd-pcm-oss]
snd-via8233 5772 0
snd-ac97-codec 25508 0 [snd-via8233]
snd-pcm 55808 0 [snd-pcm-oss snd-via8233]
snd-timer 9964 0 [snd-seq snd-pcm]
snd 24804 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-seq-device snd-pcm-oss snd-mixer-oss snd-via8233 snd-ac97-codec snd-pcm snd-timer]
soundcore 3780 0 [snd]
nfsd 66576 0 (autoclean)
lockd 46480 1 (autoclean) [nfs nfsd]
sunrpc 60188 1 (autoclean) [nfs nfsd lockd]
af_packet 13000 8 (autoclean)
hisax 444324 0 (unused)
isdn 123744 0 [hisax]
slhc 5072 0 [ppp_generic isdn]
ip_vs 74328 0 (autoclean)
8139too 14472 1 (autoclean)
mii 1152 0 (autoclean) [8139too]
nls_iso8859-15 3356 2 (autoclean)
ntfs 72908 2 (autoclean)
supermount 14340 3 (autoclean)
ide-cd 28712 0
cdrom 26848 0 [sr_mod ide-cd]
ide-scsi 8212 0
scsi_mod 90372 3 [sg sr_mod ide-scsi]
rtc 6560 0 (autoclean)
ext3 74004 2
jbd 38452 2 [ext3]

et /etc/modules.conf

alias autofs autofs4
probeall scsi_hostadapter ide-scsi
alias sound-slot-1 snd-via8233
alias eth0 8139too
alias sound-slot-0 cs4281
above snd-via8233 snd-pcm-oss
above snd-cs4281 snd-pcm-oss
alias sound cs4281
add below cs4281 ac97
alias net-pf-4 ipx
alias tap0 ethertap
options tap0 -o tap0 unit=0

merci

Vous avez filtré cet utilisateur ! Consultez son message

On Fri, 16 Jan 2004 21:32:56 +0100, Rakotomandimby wrote:

Begoua wrote:

On Fri, 16 Jan 2004 15:09:20 +0000, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver
avec tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier
sga - sgh n'existe pas quand je fais ls du repertoire /dev. est-ce la
source du probleme? que dois-faire? merci d'avance

pour le creer, je me connecte sous root dans un terminal et en tapant
bash> ./MAKEDEV sg, j'obtiens bash: ./MAKEDEV: Permission denied.
que faire?

j'essaie toujours mais rien a faire. concernant le module qui gere les
peripheriques SCSI, le fichier fichier /proc/devices n'existe pas. faut-il
le creer?

donne nous le contenu de /etc/lilo.conf
et aussi la sortie de lsmod
et aussi /etc/modules.conf ( pour savoir si il dit de charger les modules au
demarrage )

si tes modumes ide-scsi , ou ide-cd ou des trucs dans le genre ne sont pas
chargés , c'est normal que tu n'aie rien .

voici les données:

/etc/lilo.conf

boot=/dev/hda
map=/boot/map
vga=normal
default=linux
keytable=/boot/qc-latin1.klt
prompt
nowarn
timeout000
message=/boot/message
menu-scheme=wb:bw:wb:bw
ignore-table
image=/boot/vmlinuz
label=linux
root=/dev/hda6
initrd=/boot/initrd.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
label=linux-nonfb
root=/dev/hda6
initrd=/boot/initrd.img
append="devfs=mount hdc=ide-scsi"
read-only
other=/dev/hda4
label=NT
table=/dev/hda
other=/dev/fd0
label=floppy
unsafe
image=/boot/vmlinuz-2.4.19-16mdk
label=old_linux
root=/dev/hda6
initrd=/boot/initrd-2.4.19-16mdk.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
labelúilsafe
root=/dev/hda6
initrd=/boot/initrd.img
append="failsafe devfs=nomount hdc=ide-scsi"
read-only
other=/dev/hda4
label=old_NT
table=/dev/hda

ls mod

Module Size Used by Tainted: P
isofs 25652 0 (autoclean)
inflate_fs 17892 0 (autoclean) [isofs]
sg 31276 0 (autoclean)
lp 6720 0 (unused)
parport_pc 21672 1
parport 23936 1 [lp parport_pc]
binfmt_misc 5696 1
ppp_async 7456 0 (autoclean) (unused)
ppp_generic 20064 0 (autoclean) [ppp_async]
sr_mod 15096 0 (autoclean)
floppy 49340 0 (autoclean)
autofs4 9340 2 (autoclean)
nfs 67328 1 (autoclean)
appletalk 21668 12 (autoclean)
tap0 3044 1 (autoclean)
ipsec 242688 2
radeon 75736 1
agpgart 31840 3 (autoclean)
ipt_TOS 984 12 (autoclean)
ipt_LOG 3384 5 (autoclean)
ipt_REJECT 2744 4 (autoclean)
ipt_state 568 8 (autoclean)
iptable_mangle 2072 1 (autoclean)
ip_nat_irc 2384 0 (unused)
ip_nat_ftp 2992 0 (unused)
iptable_nat 15224 2 [ip_nat_irc ip_nat_ftp]
ip_conntrack_irc 3056 1
ip_conntrack_ftp 3952 1
ip_conntrack 18400 4 [ipt_state ip_nat_irc ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_ftp]
iptable_filter 1644 1 (autoclean)
ip_tables 11672 9 [ipt_TOS ipt_LOG ipt_REJECT ipt_state iptable_mangle iptable_nat iptable_filter]
snd-seq-oss 26176 0 (unused)
snd-seq-midi-event 3208 0 [snd-seq-oss]
snd-seq 33264 2 [snd-seq-oss snd-seq-midi-event]
snd-seq-device 3836 0 [snd-seq-oss snd-seq]
snd-pcm-oss 36932 0
snd-mixer-oss 9016 0 [snd-pcm-oss]
snd-via8233 5772 0
snd-ac97-codec 25508 0 [snd-via8233]
snd-pcm 55808 0 [snd-pcm-oss snd-via8233]
snd-timer 9964 0 [snd-seq snd-pcm]
snd 24804 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-seq-device snd-pcm-oss snd-mixer-oss snd-via8233 snd-ac97-codec snd-pcm snd-timer]
soundcore 3780 0 [snd]
nfsd 66576 0 (autoclean)
lockd 46480 1 (autoclean) [nfs nfsd]
sunrpc 60188 1 (autoclean) [nfs nfsd lockd]
af_packet 13000 8 (autoclean)
hisax 444324 0 (unused)
isdn 123744 0 [hisax]
slhc 5072 0 [ppp_generic isdn]
ip_vs 74328 0 (autoclean)
8139too 14472 1 (autoclean)
mii 1152 0 (autoclean) [8139too]
nls_iso8859-15 3356 2 (autoclean)
ntfs 72908 2 (autoclean)
supermount 14340 3 (autoclean)
ide-cd 28712 0
cdrom 26848 0 [sr_mod ide-cd]
ide-scsi 8212 0
scsi_mod 90372 3 [sg sr_mod ide-scsi]
rtc 6560 0 (autoclean)
ext3 74004 2
jbd 38452 2 [ext3]

et /etc/modules.conf

alias autofs autofs4
probeall scsi_hostadapter ide-scsi
alias sound-slot-1 snd-via8233
alias eth0 8139too
alias sound-slot-0 cs4281
above snd-via8233 snd-pcm-oss
above snd-cs4281 snd-pcm-oss
alias sound cs4281
add below cs4281 ac97
alias net-pf-4 ipx
alias tap0 ethertap
options tap0 -o tap0 unit=0

merci

no_spam

16/01/2004 à 22:56

On Fri, 16 Jan 2004 15:09:21 -0500, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver avec
tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier sga - sgh n'existe pas quand je fais ls du repertoire /dev.
est-ce la source du probleme? que dois-faire?
merci d'avance

et /dev/scsi/... n'existent pas non plus ?
Est-ce que le module sg est chargé ?
=> modprobe sg

pour le creer, je me connecte sous root dans un terminal et en tapant bash>
./MAKEDEV sg, j'obtiens bash: ./MAKEDEV: Permission denied.
que faire?

/dev/Makedev généralement.
ou Makedev tout simplement.
Mais la 9.0 est récente, elle devrait utiliser le devfs et non
pas Makedev.

Michel SIMIAN

17/01/2004 à 10:28

no_spam wrote:

On Fri, 16 Jan 2004 15:09:21 -0500, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver avec
tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier sga - sgh n'existe pas quand je fais ls du repertoire /dev.
est-ce la source du probleme? que dois-faire?
merci d'avance

dans ton lilo, l"append hdc=ide-scsi est bon
(si ton cdrom est ide, et en maître 2eme controleur)

avec dmesg, peut-tu savoir si il est
reconnu au boot par le module scsi ?

que donne cdrecord -scanbus ?

--
L'Amer Michel

Begoua

18/01/2004 à 07:05

On Fri, 16 Jan 2004 21:32:56 +0100, Rakotomandimby wrote:

Begoua wrote:

On Fri, 16 Jan 2004 15:09:20 +0000, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver
avec tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier
sga - sgh n'existe pas quand je fais ls du repertoire /dev. est-ce la
source du probleme? que dois-faire? merci d'avance

pour le creer, je me connecte sous root dans un terminal et en tapant
bash> ./MAKEDEV sg, j'obtiens bash: ./MAKEDEV: Permission denied.
que faire?

j'essaie toujours mais rien a faire. concernant le module qui gere les
peripheriques SCSI, le fichier fichier /proc/devices n'existe pas. faut-il
le creer?

donne nous le contenu de /etc/lilo.conf
et aussi la sortie de lsmod
et aussi /etc/modules.conf ( pour savoir si il dit de charger les modules au
demarrage )

si tes modumes ide-scsi , ou ide-cd ou des trucs dans le genre ne sont pas
chargés , c'est normal que tu n'aie rien .

Bonjour,

voici les données:

/etc/lilo.conf

boot=/dev/hda
map=/boot/map
vga=normal
default=linux
keytable=/boot/qc-latin1.klt
prompt
nowarn
timeout000
message=/boot/message
menu-scheme=wb:bw:wb:bw
ignore-table
image=/boot/vmlinuz
label=linux
root=/dev/hda6
initrd=/boot/initrd.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
label=linux-nonfb
root=/dev/hda6
initrd=/boot/initrd.img
append="devfs=mount hdc=ide-scsi"
read-only
other=/dev/hda4
label=NT
table=/dev/hda
other=/dev/fd0
label=floppy
unsafe
image=/boot/vmlinuz-2.4.19-16mdk
label=old_linux
root=/dev/hda6
initrd=/boot/initrd-2.4.19-16mdk.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
labelúilsafe
root=/dev/hda6
initrd=/boot/initrd.img
append="failsafe devfs=nomount hdc=ide-scsi"
read-only
other=/dev/hda4
label=old_NT
table=/dev/hda

ls mod

Module Size Used by Tainted: P
isofs 25652 0 (autoclean)
inflate_fs 17892 0 (autoclean) [isofs]
sg 31276 0 (autoclean)
lp 6720 0 (unused)
parport_pc 21672 1
parport 23936 1 [lp parport_pc]
binfmt_misc 5696 1
ppp_async 7456 0 (autoclean) (unused)
ppp_generic 20064 0 (autoclean) [ppp_async]
sr_mod 15096 0 (autoclean)
floppy 49340 0 (autoclean)
autofs4 9340 2 (autoclean)
nfs 67328 1 (autoclean)
appletalk 21668 12 (autoclean)
tap0 3044 1 (autoclean)
ipsec 242688 2
radeon 75736 1
agpgart 31840 3 (autoclean)
ipt_TOS 984 12 (autoclean)
ipt_LOG 3384 5 (autoclean)
ipt_REJECT 2744 4 (autoclean)
ipt_state 568 8 (autoclean)
iptable_mangle 2072 1 (autoclean)
ip_nat_irc 2384 0 (unused)
ip_nat_ftp 2992 0 (unused)
iptable_nat 15224 2 [ip_nat_irc ip_nat_ftp]
ip_conntrack_irc 3056 1
ip_conntrack_ftp 3952 1
ip_conntrack 18400 4 [ipt_state ip_nat_irc ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_ftp]
iptable_filter 1644 1 (autoclean)
ip_tables 11672 9 [ipt_TOS ipt_LOG ipt_REJECT ipt_state iptable_mangle iptable_nat iptable_filter]
snd-seq-oss 26176 0 (unused)
snd-seq-midi-event 3208 0 [snd-seq-oss]
snd-seq 33264 2 [snd-seq-oss snd-seq-midi-event]
snd-seq-device 3836 0 [snd-seq-oss snd-seq]
snd-pcm-oss 36932 0
snd-mixer-oss 9016 0 [snd-pcm-oss]
snd-via8233 5772 0
snd-ac97-codec 25508 0 [snd-via8233]
snd-pcm 55808 0 [snd-pcm-oss snd-via8233]
snd-timer 9964 0 [snd-seq snd-pcm]
snd 24804 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-seq-device snd-pcm-oss snd-mixer-oss snd-via8233 snd-ac97-codec snd-pcm snd-timer]
soundcore 3780 0 [snd]
nfsd 66576 0 (autoclean)
lockd 46480 1 (autoclean) [nfs nfsd]
sunrpc 60188 1 (autoclean) [nfs nfsd lockd]
af_packet 13000 8 (autoclean)
hisax 444324 0 (unused)
isdn 123744 0 [hisax]
slhc 5072 0 [ppp_generic isdn]
ip_vs 74328 0 (autoclean)
8139too 14472 1 (autoclean)
mii 1152 0 (autoclean) [8139too]
nls_iso8859-15 3356 2 (autoclean)
ntfs 72908 2 (autoclean)
supermount 14340 3 (autoclean)
ide-cd 28712 0
cdrom 26848 0 [sr_mod ide-cd]
ide-scsi 8212 0
scsi_mod 90372 3 [sg sr_mod ide-scsi]
rtc 6560 0 (autoclean)
ext3 74004 2
jbd 38452 2 [ext3]

et /etc/modules.conf

alias autofs autofs4
probeall scsi_hostadapter ide-scsi
alias sound-slot-1 snd-via8233
alias eth0 8139too
alias sound-slot-0 cs4281
above snd-via8233 snd-pcm-oss
above snd-cs4281 snd-pcm-oss
alias sound cs4281
add below cs4281 ac97
alias net-pf-4 ipx
alias tap0 ethertap
options tap0 -o tap0 unit=0

merci

On Fri, 16 Jan 2004 21:32:56 +0100, Rakotomandimby wrote:

Begoua wrote:

On Fri, 16 Jan 2004 15:09:20 +0000, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver
avec tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier
sga - sgh n'existe pas quand je fais ls du repertoire /dev. est-ce la
source du probleme? que dois-faire? merci d'avance

pour le creer, je me connecte sous root dans un terminal et en tapant
bash> ./MAKEDEV sg, j'obtiens bash: ./MAKEDEV: Permission denied.
que faire?

j'essaie toujours mais rien a faire. concernant le module qui gere les
peripheriques SCSI, le fichier fichier /proc/devices n'existe pas. faut-il
le creer?

donne nous le contenu de /etc/lilo.conf
et aussi la sortie de lsmod
et aussi /etc/modules.conf ( pour savoir si il dit de charger les modules au
demarrage )

si tes modumes ide-scsi , ou ide-cd ou des trucs dans le genre ne sont pas
chargés , c'est normal que tu n'aie rien .

Bonjour,

voici les données:

/etc/lilo.conf

boot=/dev/hda
map=/boot/map
vga=normal
default=linux
keytable=/boot/qc-latin1.klt
prompt
nowarn
timeout000
message=/boot/message
menu-scheme=wb:bw:wb:bw
ignore-table
image=/boot/vmlinuz
label=linux
root=/dev/hda6
initrd=/boot/initrd.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
label=linux-nonfb
root=/dev/hda6
initrd=/boot/initrd.img
append="devfs=mount hdc=ide-scsi"
read-only
other=/dev/hda4
label=NT
table=/dev/hda
other=/dev/fd0
label=floppy
unsafe
image=/boot/vmlinuz-2.4.19-16mdk
label=old_linux
root=/dev/hda6
initrd=/boot/initrd-2.4.19-16mdk.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
labelúilsafe
root=/dev/hda6
initrd=/boot/initrd.img
append="failsafe devfs=nomount hdc=ide-scsi"
read-only
other=/dev/hda4
label=old_NT
table=/dev/hda

ls mod

Module Size Used by Tainted: P
isofs 25652 0 (autoclean)
inflate_fs 17892 0 (autoclean) [isofs]
sg 31276 0 (autoclean)
lp 6720 0 (unused)
parport_pc 21672 1
parport 23936 1 [lp parport_pc]
binfmt_misc 5696 1
ppp_async 7456 0 (autoclean) (unused)
ppp_generic 20064 0 (autoclean) [ppp_async]
sr_mod 15096 0 (autoclean)
floppy 49340 0 (autoclean)
autofs4 9340 2 (autoclean)
nfs 67328 1 (autoclean)
appletalk 21668 12 (autoclean)
tap0 3044 1 (autoclean)
ipsec 242688 2
radeon 75736 1
agpgart 31840 3 (autoclean)
ipt_TOS 984 12 (autoclean)
ipt_LOG 3384 5 (autoclean)
ipt_REJECT 2744 4 (autoclean)
ipt_state 568 8 (autoclean)
iptable_mangle 2072 1 (autoclean)
ip_nat_irc 2384 0 (unused)
ip_nat_ftp 2992 0 (unused)
iptable_nat 15224 2 [ip_nat_irc ip_nat_ftp]
ip_conntrack_irc 3056 1
ip_conntrack_ftp 3952 1
ip_conntrack 18400 4 [ipt_state ip_nat_irc ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_ftp]
iptable_filter 1644 1 (autoclean)
ip_tables 11672 9 [ipt_TOS ipt_LOG ipt_REJECT ipt_state iptable_mangle iptable_nat iptable_filter]
snd-seq-oss 26176 0 (unused)
snd-seq-midi-event 3208 0 [snd-seq-oss]
snd-seq 33264 2 [snd-seq-oss snd-seq-midi-event]
snd-seq-device 3836 0 [snd-seq-oss snd-seq]
snd-pcm-oss 36932 0
snd-mixer-oss 9016 0 [snd-pcm-oss]
snd-via8233 5772 0
snd-ac97-codec 25508 0 [snd-via8233]
snd-pcm 55808 0 [snd-pcm-oss snd-via8233]
snd-timer 9964 0 [snd-seq snd-pcm]
snd 24804 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-seq-device snd-pcm-oss snd-mixer-oss snd-via8233 snd-ac97-codec snd-pcm snd-timer]
soundcore 3780 0 [snd]
nfsd 66576 0 (autoclean)
lockd 46480 1 (autoclean) [nfs nfsd]
sunrpc 60188 1 (autoclean) [nfs nfsd lockd]
af_packet 13000 8 (autoclean)
hisax 444324 0 (unused)
isdn 123744 0 [hisax]
slhc 5072 0 [ppp_generic isdn]
ip_vs 74328 0 (autoclean)
8139too 14472 1 (autoclean)
mii 1152 0 (autoclean) [8139too]
nls_iso8859-15 3356 2 (autoclean)
ntfs 72908 2 (autoclean)
supermount 14340 3 (autoclean)
ide-cd 28712 0
cdrom 26848 0 [sr_mod ide-cd]
ide-scsi 8212 0
scsi_mod 90372 3 [sg sr_mod ide-scsi]
rtc 6560 0 (autoclean)
ext3 74004 2
jbd 38452 2 [ext3]

et /etc/modules.conf

alias autofs autofs4
probeall scsi_hostadapter ide-scsi
alias sound-slot-1 snd-via8233
alias eth0 8139too
alias sound-slot-0 cs4281
above snd-via8233 snd-pcm-oss
above snd-cs4281 snd-pcm-oss
alias sound cs4281
add below cs4281 ac97
alias net-pf-4 ipx
alias tap0 ethertap
options tap0 -o tap0 unit=0

merci

Vous avez filtré cet utilisateur ! Consultez son message

On Fri, 16 Jan 2004 21:32:56 +0100, Rakotomandimby wrote:

Begoua wrote:

On Fri, 16 Jan 2004 15:09:20 +0000, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver
avec tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier
sga - sgh n'existe pas quand je fais ls du repertoire /dev. est-ce la
source du probleme? que dois-faire? merci d'avance

pour le creer, je me connecte sous root dans un terminal et en tapant
bash> ./MAKEDEV sg, j'obtiens bash: ./MAKEDEV: Permission denied.
que faire?

j'essaie toujours mais rien a faire. concernant le module qui gere les
peripheriques SCSI, le fichier fichier /proc/devices n'existe pas. faut-il
le creer?

donne nous le contenu de /etc/lilo.conf
et aussi la sortie de lsmod
et aussi /etc/modules.conf ( pour savoir si il dit de charger les modules au
demarrage )

si tes modumes ide-scsi , ou ide-cd ou des trucs dans le genre ne sont pas
chargés , c'est normal que tu n'aie rien .

Bonjour,

voici les données:

/etc/lilo.conf

boot=/dev/hda
map=/boot/map
vga=normal
default=linux
keytable=/boot/qc-latin1.klt
prompt
nowarn
timeout000
message=/boot/message
menu-scheme=wb:bw:wb:bw
ignore-table
image=/boot/vmlinuz
label=linux
root=/dev/hda6
initrd=/boot/initrd.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
label=linux-nonfb
root=/dev/hda6
initrd=/boot/initrd.img
append="devfs=mount hdc=ide-scsi"
read-only
other=/dev/hda4
label=NT
table=/dev/hda
other=/dev/fd0
label=floppy
unsafe
image=/boot/vmlinuz-2.4.19-16mdk
label=old_linux
root=/dev/hda6
initrd=/boot/initrd-2.4.19-16mdk.img
append="quiet devfs=mount hdc=ide-scsi"
vgax8
read-only
image=/boot/vmlinuz
labelúilsafe
root=/dev/hda6
initrd=/boot/initrd.img
append="failsafe devfs=nomount hdc=ide-scsi"
read-only
other=/dev/hda4
label=old_NT
table=/dev/hda

ls mod

Module Size Used by Tainted: P
isofs 25652 0 (autoclean)
inflate_fs 17892 0 (autoclean) [isofs]
sg 31276 0 (autoclean)
lp 6720 0 (unused)
parport_pc 21672 1
parport 23936 1 [lp parport_pc]
binfmt_misc 5696 1
ppp_async 7456 0 (autoclean) (unused)
ppp_generic 20064 0 (autoclean) [ppp_async]
sr_mod 15096 0 (autoclean)
floppy 49340 0 (autoclean)
autofs4 9340 2 (autoclean)
nfs 67328 1 (autoclean)
appletalk 21668 12 (autoclean)
tap0 3044 1 (autoclean)
ipsec 242688 2
radeon 75736 1
agpgart 31840 3 (autoclean)
ipt_TOS 984 12 (autoclean)
ipt_LOG 3384 5 (autoclean)
ipt_REJECT 2744 4 (autoclean)
ipt_state 568 8 (autoclean)
iptable_mangle 2072 1 (autoclean)
ip_nat_irc 2384 0 (unused)
ip_nat_ftp 2992 0 (unused)
iptable_nat 15224 2 [ip_nat_irc ip_nat_ftp]
ip_conntrack_irc 3056 1
ip_conntrack_ftp 3952 1
ip_conntrack 18400 4 [ipt_state ip_nat_irc ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_ftp]
iptable_filter 1644 1 (autoclean)
ip_tables 11672 9 [ipt_TOS ipt_LOG ipt_REJECT ipt_state iptable_mangle iptable_nat iptable_filter]
snd-seq-oss 26176 0 (unused)
snd-seq-midi-event 3208 0 [snd-seq-oss]
snd-seq 33264 2 [snd-seq-oss snd-seq-midi-event]
snd-seq-device 3836 0 [snd-seq-oss snd-seq]
snd-pcm-oss 36932 0
snd-mixer-oss 9016 0 [snd-pcm-oss]
snd-via8233 5772 0
snd-ac97-codec 25508 0 [snd-via8233]
snd-pcm 55808 0 [snd-pcm-oss snd-via8233]
snd-timer 9964 0 [snd-seq snd-pcm]
snd 24804 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-seq-device snd-pcm-oss snd-mixer-oss snd-via8233 snd-ac97-codec snd-pcm snd-timer]
soundcore 3780 0 [snd]
nfsd 66576 0 (autoclean)
lockd 46480 1 (autoclean) [nfs nfsd]
sunrpc 60188 1 (autoclean) [nfs nfsd lockd]
af_packet 13000 8 (autoclean)
hisax 444324 0 (unused)
isdn 123744 0 [hisax]
slhc 5072 0 [ppp_generic isdn]
ip_vs 74328 0 (autoclean)
8139too 14472 1 (autoclean)
mii 1152 0 (autoclean) [8139too]
nls_iso8859-15 3356 2 (autoclean)
ntfs 72908 2 (autoclean)
supermount 14340 3 (autoclean)
ide-cd 28712 0
cdrom 26848 0 [sr_mod ide-cd]
ide-scsi 8212 0
scsi_mod 90372 3 [sg sr_mod ide-scsi]
rtc 6560 0 (autoclean)
ext3 74004 2
jbd 38452 2 [ext3]

et /etc/modules.conf

alias autofs autofs4
probeall scsi_hostadapter ide-scsi
alias sound-slot-1 snd-via8233
alias eth0 8139too
alias sound-slot-0 cs4281
above snd-via8233 snd-pcm-oss
above snd-cs4281 snd-pcm-oss
alias sound cs4281
add below cs4281 ac97
alias net-pf-4 ipx
alias tap0 ethertap
options tap0 -o tap0 unit=0

merci

Begoua

19/01/2004 à 10:27

On Sat, 17 Jan 2004 10:28:00 +0100, Michel SIMIAN wrote:

no_spam wrote:
On Fri, 16 Jan 2004 15:09:21 -0500, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver avec
tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier sga - sgh n'existe pas quand je fais ls du repertoire /dev.
est-ce la source du probleme? que dois-faire?
merci d'avance

dans ton lilo, l"append hdc=ide-scsi est bon
(si ton cdrom est ide, et en maître 2eme controleur)

avec dmesg, peut-tu savoir si il est
reconnu au boot par le module scsi ?

que donne cdrecord -scanbus ?

Bonjour,

dmesg me donne ce message:
ce.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
Advanced speculative caching feature present
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: VIA Product ID: KT266 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 2 at 0xFEC00000.
Processors: 1
Kernel command line: auto BOOT_IMAGE=linux ro root06 quiet devfs=mount hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1466.762 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2922.90 BogoMIPS
Memory: 515504k/524224k available (1176k kernel code, 8332k reserved, 444k data, 136k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
Advanced speculative caching feature present
Disabling advanced speculative caching
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbf7 c1cbfbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbf7 c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbf7 c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1700+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-19, 2-20, 2-21, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178002
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0002
WARNING: unexpected IO-APIC, please mail
to
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 79
0d 001 01 0 0 0 0 0 1 1 81
0e 001 01 0 0 0 0 0 1 1 89
0f 001 01 0 0 0 0 0 1 1 91
10 001 01 1 1 0 1 0 1 1 99
11 001 01 1 1 0 1 0 1 1 A1
12 001 01 1 1 0 1 0 1 1 A9
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 001 01 1 1 0 1 0 1 1 B1
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ22 -> 0:22
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1466.7214 MHz.
..... host bus clock speed is 266.6766 MHz.
cpu: 0, clocks: 2666766, slice: 1333383
CPU0<T0:2666752,T1:1333360,D:9,S:1333383,C:2666766>
mtrr: v1.40 (20010327) Richard Gooch ()
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/3147] at 00:11.0
PCI->APIC IRQ transform: (B0,I10,P0) -> 18
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B0,I13,P0) -> 17
PCI->APIC IRQ transform: (B0,I17,P0) -> 16
PCI->APIC IRQ transform: (B0,I17,P2) -> 22
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch ()
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 65536k
vesafb: mode is 800x600x16, linelength00, pagesg
vesafb: protected mode interface info at c000:54ab
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 30412 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6E030L0, ATA DISK drive
hdb: MAXTOR 6L060J3, ATA DISK drive
hdc: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
hdd: CREATIVE CD5233E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS738/255/63, UDMA(133)
hdb: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS6336/16/63, UDMA(133)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 > p4
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS%6, MD_SB_DISKS'
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 121k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
Adding Swap: 570236k swap-space (priority -1)
nvidia: no NVIDIA graphics adapter found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-32123S Rev: XS0X
Type: CD-ROM ANSI SCSI revision: 02
hdd: ATAPI 56X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.0a [Flags: R/O MODULE].
NTFS-fs warning (device 03:04): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.0.
NTFS-fs warning (device 03:45): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device 03:45): ntfs_read_super(): Not an NTFS volume.
hdc: DMA disabled
hdd: DMA disabled
8139too Fast Ethernet driver 0.9.25
eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xe49e6f00, 00:50:ba:c2:6a:ed, IRQ 17
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
i2c-core.o: i2c core module version 2.6.4 (20020719)
i2c-proc.o version 2.6.4 (20020719)
IPVS: Connection hash table configured (, memory2Kbytes)
IPVS: Each connection entry needs 116 bytes at least
IPVS: ipvs loaded.
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 1.1.4.1
HiSax: Layer2 Revision 1.1.4.1
HiSax: TeiMgr Revision 1.1.4.1
HiSax: Layer3 Revision 1.1.4.1
HiSax: LinkLayer Revision 1.1.4.1
HiSax: Approval certification valid
HiSax: Approved with ELSA Microlink PCI cards
HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
HiSax: Approved with Sedlbauer Speedfax + cards
HiSax: Approved with HFC-S PCI A based cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=Teles1 (0)
HiSax: Teles IO driver Rev. 1.1.4.1
Teles: 16.3 Byte at d80 is ff
HiSax: Card Teles 16.3 not installed !
Installing knfsd (copyright (C) 1996 ).
PCI: Setting latency timer of device 00:11.5 to 64
NTFS-fs warning (device 03:45): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device 03:45): ntfs_read_super(): Not an NTFS volume.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xe0000000 64MB
[drm] Initialized radeon 1.2.0 20011231 on minor 0
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: 1.98b
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
NET4: AppleTalk 0.18a for Linux NET4.0
PPP generic driver version 2.4.2
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
Splash status on console 0 changed to off
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
sr0: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda tray
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRC!8.37.76.171 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL4 IDD00 DF PROTO=TCP SPT!78 DPT1 WINDOWd240 RES=0x00 SYN URGP=0
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
inserting floppy driver for 2.4.19-16mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRCd.228.184.73 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL8 IDG733 DF PROTO=TCP SPT372 DPT990 WINDOW60 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRCd.228.184.73 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL8 IDG751 DF PROTO=TCP SPT372 DPT990 WINDOW60 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRCd.228.184.73 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL8 IDG783 DF PROTO=TCP SPT372 DPT990 WINDOW60 RES=0x00 SYN URGP=0

et cdrecord -scanbus celui-ci

Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) *
0,1,0 1) *
0,2,0 2) 'LITE-ON ' 'LTR-32123S ' 'XS0X' Removable CD-ROM
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *

est-ce le CD-W est correctement installé et reconnu?

On Sat, 17 Jan 2004 10:28:00 +0100, Michel SIMIAN wrote:

no_spam wrote:

On Fri, 16 Jan 2004 15:09:21 -0500, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver avec
tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier sga - sgh n'existe pas quand je fais ls du repertoire /dev.
est-ce la source du probleme? que dois-faire?
merci d'avance

dans ton lilo, l"append hdc=ide-scsi est bon
(si ton cdrom est ide, et en maître 2eme controleur)

avec dmesg, peut-tu savoir si il est
reconnu au boot par le module scsi ?

que donne cdrecord -scanbus ?

Bonjour,

dmesg me donne ce message:
ce.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
Advanced speculative caching feature present
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: VIA Product ID: KT266 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 2 at 0xFEC00000.
Processors: 1
Kernel command line: auto BOOT_IMAGE=linux ro root06 quiet devfs=mount hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1466.762 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2922.90 BogoMIPS
Memory: 515504k/524224k available (1176k kernel code, 8332k reserved, 444k data, 136k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
Advanced speculative caching feature present
Disabling advanced speculative caching
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbf7 c1cbfbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbf7 c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbf7 c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1700+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-19, 2-20, 2-21, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178002
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0002
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 79
0d 001 01 0 0 0 0 0 1 1 81
0e 001 01 0 0 0 0 0 1 1 89
0f 001 01 0 0 0 0 0 1 1 91
10 001 01 1 1 0 1 0 1 1 99
11 001 01 1 1 0 1 0 1 1 A1
12 001 01 1 1 0 1 0 1 1 A9
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 001 01 1 1 0 1 0 1 1 B1
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ22 -> 0:22
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1466.7214 MHz.
..... host bus clock speed is 266.6766 MHz.
cpu: 0, clocks: 2666766, slice: 1333383
CPU0<T0:2666752,T1:1333360,D:9,S:1333383,C:2666766>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/3147] at 00:11.0
PCI->APIC IRQ transform: (B0,I10,P0) -> 18
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B0,I13,P0) -> 17
PCI->APIC IRQ transform: (B0,I17,P0) -> 16
PCI->APIC IRQ transform: (B0,I17,P2) -> 22
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 65536k
vesafb: mode is 800x600x16, linelength00, pagesg
vesafb: protected mode interface info at c000:54ab
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 30412 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6E030L0, ATA DISK drive
hdb: MAXTOR 6L060J3, ATA DISK drive
hdc: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
hdd: CREATIVE CD5233E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS738/255/63, UDMA(133)
hdb: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS6336/16/63, UDMA(133)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 > p4
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS%6, MD_SB_DISKS'
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 121k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
Adding Swap: 570236k swap-space (priority -1)
nvidia: no NVIDIA graphics adapter found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-32123S Rev: XS0X
Type: CD-ROM ANSI SCSI revision: 02
hdd: ATAPI 56X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.0a [Flags: R/O MODULE].
NTFS-fs warning (device 03:04): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.0.
NTFS-fs warning (device 03:45): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device 03:45): ntfs_read_super(): Not an NTFS volume.
hdc: DMA disabled
hdd: DMA disabled
8139too Fast Ethernet driver 0.9.25
eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xe49e6f00, 00:50:ba:c2:6a:ed, IRQ 17
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
i2c-core.o: i2c core module version 2.6.4 (20020719)
i2c-proc.o version 2.6.4 (20020719)
IPVS: Connection hash table configured (size@96, memory2Kbytes)
IPVS: Each connection entry needs 116 bytes at least
IPVS: ipvs loaded.
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 1.1.4.1
HiSax: Layer2 Revision 1.1.4.1
HiSax: TeiMgr Revision 1.1.4.1
HiSax: Layer3 Revision 1.1.4.1
HiSax: LinkLayer Revision 1.1.4.1
HiSax: Approval certification valid
HiSax: Approved with ELSA Microlink PCI cards
HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
HiSax: Approved with Sedlbauer Speedfax + cards
HiSax: Approved with HFC-S PCI A based cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=Teles1 (0)
HiSax: Teles IO driver Rev. 1.1.4.1
Teles: 16.3 Byte at d80 is ff
HiSax: Card Teles 16.3 not installed !
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
PCI: Setting latency timer of device 00:11.5 to 64
NTFS-fs warning (device 03:45): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device 03:45): ntfs_read_super(): Not an NTFS volume.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xe0000000 64MB
[drm] Initialized radeon 1.2.0 20011231 on minor 0
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: 1.98b
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
NET4: AppleTalk 0.18a for Linux NET4.0
PPP generic driver version 2.4.2
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
Splash status on console 0 changed to off
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
sr0: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda tray
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRC!8.37.76.171 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL4 IDD00 DF PROTO=TCP SPT!78 DPT1 WINDOWd240 RES=0x00 SYN URGP=0
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
inserting floppy driver for 2.4.19-16mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRCd.228.184.73 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL8 IDG733 DF PROTO=TCP SPT372 DPT990 WINDOW60 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRCd.228.184.73 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL8 IDG751 DF PROTO=TCP SPT372 DPT990 WINDOW60 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRCd.228.184.73 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL8 IDG783 DF PROTO=TCP SPT372 DPT990 WINDOW60 RES=0x00 SYN URGP=0

et cdrecord -scanbus celui-ci

Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) *
0,1,0 1) *
0,2,0 2) 'LITE-ON ' 'LTR-32123S ' 'XS0X' Removable CD-ROM
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *

est-ce le CD-W est correctement installé et reconnu?

Vous avez filtré cet utilisateur ! Consultez son message

On Sat, 17 Jan 2004 10:28:00 +0100, Michel SIMIAN wrote:

no_spam wrote:
On Fri, 16 Jan 2004 15:09:21 -0500, Begoua wrote:

On Fri, 16 Jan 2004 15:04:48 +0000, Begoua wrote:

je suis nouvel utilisateur de la MDK 9.0 et je n'arrive pas a graver avec
tous les logiciels disponibles. en fouillant dans le HOWTO sur les
graveurs pour les procedures a suivre, je me rendu compte que le fichier sga - sgh n'existe pas quand je fais ls du repertoire /dev.
est-ce la source du probleme? que dois-faire?
merci d'avance

dans ton lilo, l"append hdc=ide-scsi est bon
(si ton cdrom est ide, et en maître 2eme controleur)

avec dmesg, peut-tu savoir si il est
reconnu au boot par le module scsi ?

que donne cdrecord -scanbus ?

Bonjour,

dmesg me donne ce message:
ce.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
Advanced speculative caching feature present
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: VIA Product ID: KT266 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 2 at 0xFEC00000.
Processors: 1
Kernel command line: auto BOOT_IMAGE=linux ro root06 quiet devfs=mount hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1466.762 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2922.90 BogoMIPS
Memory: 515504k/524224k available (1176k kernel code, 8332k reserved, 444k data, 136k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
Advanced speculative caching feature present
Disabling advanced speculative caching
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbf7 c1cbfbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbf7 c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbf7 c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1700+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-19, 2-20, 2-21, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178002
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0002
WARNING: unexpected IO-APIC, please mail
to
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 79
0d 001 01 0 0 0 0 0 1 1 81
0e 001 01 0 0 0 0 0 1 1 89
0f 001 01 0 0 0 0 0 1 1 91
10 001 01 1 1 0 1 0 1 1 99
11 001 01 1 1 0 1 0 1 1 A1
12 001 01 1 1 0 1 0 1 1 A9
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 001 01 1 1 0 1 0 1 1 B1
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ22 -> 0:22
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1466.7214 MHz.
..... host bus clock speed is 266.6766 MHz.
cpu: 0, clocks: 2666766, slice: 1333383
CPU0<T0:2666752,T1:1333360,D:9,S:1333383,C:2666766>
mtrr: v1.40 (20010327) Richard Gooch ()
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router default [1106/3147] at 00:11.0
PCI->APIC IRQ transform: (B0,I10,P0) -> 18
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B0,I13,P0) -> 17
PCI->APIC IRQ transform: (B0,I17,P0) -> 16
PCI->APIC IRQ transform: (B0,I17,P2) -> 22
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch ()
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 65536k
vesafb: mode is 800x600x16, linelength00, pagesg
vesafb: protected mode interface info at c000:54ab
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 30412 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6E030L0, ATA DISK drive
hdb: MAXTOR 6L060J3, ATA DISK drive
hdc: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
hdd: CREATIVE CD5233E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS738/255/63, UDMA(133)
hdb: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS6336/16/63, UDMA(133)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 > p4
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS%6, MD_SB_DISKS'
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 121k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
Adding Swap: 570236k swap-space (priority -1)
nvidia: no NVIDIA graphics adapter found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-32123S Rev: XS0X
Type: CD-ROM ANSI SCSI revision: 02
hdd: ATAPI 56X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,65), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.0a [Flags: R/O MODULE].
NTFS-fs warning (device 03:04): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.0.
NTFS-fs warning (device 03:45): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device 03:45): ntfs_read_super(): Not an NTFS volume.
hdc: DMA disabled
hdd: DMA disabled
8139too Fast Ethernet driver 0.9.25
eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xe49e6f00, 00:50:ba:c2:6a:ed, IRQ 17
eth0: Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
i2c-core.o: i2c core module version 2.6.4 (20020719)
i2c-proc.o version 2.6.4 (20020719)
IPVS: Connection hash table configured (, memory2Kbytes)
IPVS: Each connection entry needs 116 bytes at least
IPVS: ipvs loaded.
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 1.1.4.1
HiSax: Layer2 Revision 1.1.4.1
HiSax: TeiMgr Revision 1.1.4.1
HiSax: Layer3 Revision 1.1.4.1
HiSax: LinkLayer Revision 1.1.4.1
HiSax: Approval certification valid
HiSax: Approved with ELSA Microlink PCI cards
HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
HiSax: Approved with Sedlbauer Speedfax + cards
HiSax: Approved with HFC-S PCI A based cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=Teles1 (0)
HiSax: Teles IO driver Rev. 1.1.4.1
Teles: 16.3 Byte at d80 is ff
HiSax: Card Teles 16.3 not installed !
Installing knfsd (copyright (C) 1996 ).
PCI: Setting latency timer of device 00:11.5 to 64
NTFS-fs warning (device 03:45): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device 03:45): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device 03:45): ntfs_read_super(): Not an NTFS volume.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xe0000000 64MB
[drm] Initialized radeon 1.2.0 20011231 on minor 0
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version: 1.98b
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
NET4: AppleTalk 0.18a for Linux NET4.0
PPP generic driver version 2.4.2
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
Splash status on console 0 changed to off
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
sr0: scsi3-mmc drive: 12x/12x writer cd/rw xa/form2 cdda tray
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRC!8.37.76.171 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL4 IDD00 DF PROTO=TCP SPT!78 DPT1 WINDOWd240 RES=0x00 SYN URGP=0
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
attempt to access beyond end of device
0b:00: rw=0, want4, (=0x22), limit=2
isofs_read_super: bread failed, dev:00, iso_blknum, block
inserting floppy driver for 2.4.19-16mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRCd.228.184.73 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL8 IDG733 DF PROTO=TCP SPT372 DPT990 WINDOW60 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRCd.228.184.73 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL8 IDG751 DF PROTO=TCP SPT372 DPT990 WINDOW60 RES=0x00 SYN URGP=0
Shorewall:net2all:DROP:IN=eth0 OUT= MAC:50:ba:c2:6a:ed:00:0b:be:a8:5b:80:08:00 SRCd.228.184.73 DST$.202.41.123 LENH TOS=0x00 PREC=0x00 TTL8 IDG783 DF PROTO=TCP SPT372 DPT990 WINDOW60 RES=0x00 SYN URGP=0

et cdrecord -scanbus celui-ci

Cdrecord 1.11a32 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) *
0,1,0 1) *
0,2,0 2) 'LITE-ON ' 'LTR-32123S ' 'XS0X' Removable CD-ROM
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *

est-ce le CD-W est correctement installé et reconnu?

graveur SCSI

8 réponses

Veuillez sélectionner un problème