Dans le même genre que le message précédent, je cherche un installeur
firefox que je pourrais modifier (pour y mettre les configs qui vont
bien, et si possible une ou deux extensions), pour passer à des
personnes de mon réseau local, typiquement en cd (et qu'ils aient juste
à cliquer sur un .exe pour que tout se fasse tout seul dans le meilleur
des cas).
(et éventuellement, la même chose pour thunderbird, mais bon...)
--
Will
Dans le même genre que le message précédent, je cherche un installeur firefox que je pourrais modifier (pour y mettre les configs qui vont bien, et si possible une ou deux extensions), pour passer à des personnes de mon réseau local, typiquement en cd (et qu'ils aient juste à cliquer sur un .exe pour que tout se fasse tout seul dans le meilleur des cas).
Tu peux télécharger InstallCreator et te faire du sur-mesure.
http://www.clickteam.com/fr/index.php
-- Steph. K. Validateur d'accessibilité libre et open-source : http://validateur-accessibilite.apinc.org/
Will a écrit :
Dans le même genre que le message précédent, je cherche un installeur
firefox que je pourrais modifier (pour y mettre les configs qui vont
bien, et si possible une ou deux extensions), pour passer à des
personnes de mon réseau local, typiquement en cd (et qu'ils aient juste
à cliquer sur un .exe pour que tout se fasse tout seul dans le meilleur
des cas).
Tu peux télécharger InstallCreator et te faire du sur-mesure.
http://www.clickteam.com/fr/index.php
--
Steph. K.
Validateur d'accessibilité libre et open-source :
http://validateur-accessibilite.apinc.org/
Dans le même genre que le message précédent, je cherche un installeur firefox que je pourrais modifier (pour y mettre les configs qui vont bien, et si possible une ou deux extensions), pour passer à des personnes de mon réseau local, typiquement en cd (et qu'ils aient juste à cliquer sur un .exe pour que tout se fasse tout seul dans le meilleur des cas).
Tu peux télécharger InstallCreator et te faire du sur-mesure.
http://www.clickteam.com/fr/index.php
-- Steph. K. Validateur d'accessibilité libre et open-source : http://validateur-accessibilite.apinc.org/
Will
Le 08/02/2005 21:53 (à peu de choses près), Steph.K a intelligemment dit...
Tu peux télécharger InstallCreator et te faire du sur-mesure. http://www.clickteam.com/fr/index.php
ouais, ça a l'air intéressant, même si je préfèrerais plutôt un truc libre, ou au moins sans pub...
-- Will
Le 08/02/2005 21:53 (à peu de choses près), Steph.K a intelligemment dit...
Tu peux télécharger InstallCreator et te faire du sur-mesure.
http://www.clickteam.com/fr/index.php
ouais, ça a l'air intéressant, même si je préfèrerais plutôt un truc
libre, ou au moins sans pub...
Nsis est libre, et il marche très bien :-) Mais sinon, pour Firefox, AMHA un .bat pourrait suffire...
ok pour le pt bat , mais dans un mode silence cela est-il possible? pour eviter de cliker kom un ouf sur plusieurs poste... lros des installations
Will
Le 08/02/2005 22:44 (à peu de choses près), Fabien LE LEZ a intelligemment dit...
Mais sinon, pour Firefox, AMHA un .bat pourrait suffire...
c'est ce que je pense aussi, mais je réfléchis fort là :)
genre un .bat avec l'install de firefox et le copiage dans la foulée d'un user.js et de quelques chrome ? cela ne nous règle pas le problème des extensions.... :/ et puis par contre, je sais pas trop comment trouver le bon dossier xxxx.default (mais ça doit se faire j'imagine).
-- Will
Le 08/02/2005 22:44 (à peu de choses près), Fabien LE LEZ a
intelligemment dit...
Mais sinon, pour Firefox, AMHA un .bat pourrait suffire...
c'est ce que je pense aussi, mais je réfléchis fort là :)
genre un .bat avec l'install de firefox et le copiage dans la foulée
d'un user.js et de quelques chrome ? cela ne nous règle pas le problème
des extensions.... :/
et puis par contre, je sais pas trop comment trouver le bon dossier
xxxx.default (mais ça doit se faire j'imagine).
Le 08/02/2005 22:44 (à peu de choses près), Fabien LE LEZ a intelligemment dit...
Mais sinon, pour Firefox, AMHA un .bat pourrait suffire...
c'est ce que je pense aussi, mais je réfléchis fort là :)
genre un .bat avec l'install de firefox et le copiage dans la foulée d'un user.js et de quelques chrome ? cela ne nous règle pas le problème des extensions.... :/ et puis par contre, je sais pas trop comment trouver le bon dossier xxxx.default (mais ça doit se faire j'imagine).
-- Will
Babar
Babar a écrit :
Fabien LE LEZ a écrit :
On Tue, 08 Feb 2005 21:53:16 +0100, "Steph.K" :
Tu peux télécharger InstallCreator
Nsis est libre, et il marche très bien :-) Mais sinon, pour Firefox, AMHA un .bat pourrait suffire...
ok pour le pt bat , mais dans un mode silence cela est-il possible? pour eviter de cliker kom un ouf sur plusieurs poste... lros des installations
j'ai trouvé un article! pour le sinteressés voici la marche a suivre (in english)
1. Download the Mozilla Firefox installation, and then execute the installation, but do not proceed to install the software. 3. Navigate to "C:Documents and SettingsYourUserNameLocal SettingsTemp" and locate the folder containing the extracted Mozilla Firefox files (it's best to clear out your Temp files and folders before doing this step). 4. Copy the extracted files into a folder somewhere else on your hard drive, then exit from the unfinished Mozilla Firefox installation. 5. Edit the "Config.ini" file located in the folder containing the extracted files (use Notepad). Change "Run Mode = Silent" and all of the "Show Dialog=TRUE" to "Show DialogúLSE" (change all of them except the section titled "[Dialog Installing]", leave this one to TRUE). After testing the basic installation, try editing the other settings to get what you want. 6. Save the "AutoInstall.vbs" script in the folder containing the extracted files. 7. Test your installation using the "AutoInstall.vbs" script.
8. Open Mozilla Firefox and make any preference changes you want using either the GUI interface buttons and menus, or using "About:Config" in the Address bar along the top of the window. 9. Close the Mozilla Firefox browser and then navigate to, and copy, the "C:Documents and SettingsYourUserNameApplication DataMozillaFirefoxProfilesxxxxxprefs.js" file to another location. 10. Edit the "prefs.js" file (use Notepad), removing any references to the specific user account, and then save the file. 11. Rename and copy the file to "C:Program FilesMozilla Firefoxdefaultsprofileuser.js". 12. Delete the "C:Documents and SettingsYourUserNameApplication DataMozilla" folder, and then open Mozilla Firefox to test your new default settings. 13. If desired, edit the "C:Program FilesMozilla Firefoxdefaultsprofilebookmark.html" document if custom default bookmarks are required (use Notepad or an HTML editor).
And here's the code for the "AutoInstall.vbs" script:
' Automatic Mozilla Firefox installation and configuration script.
Option Explicit Dim WshShell, objFSO
On Error Resume Next
Set WshShell = WScript.CreateObject("WScript.Shell") Set objFSO = CreateObject("Scripting.FileSystemObject")
' Executes the installation. WshShell.Run "setup.exe", 1, False
' Verifies that the installation has completed (checks every two seconds). While WshShell.AppActivate("Install Complete") = FALSE wscript.sleep 2001 Wend WScript.Sleep 502
'Brings the installer to the foreground. WshShell.AppActivate "Install Complete" WScript.Sleep 1003
'Sends keystroke to close the installation window. WshShell.SendKeys "{ENTER}" WScript.Sleep 3004
' OPTIONAL CUSTOMIZATIONS ' Configures Firefox preferences. If objFSO.FileExists ("user.js") Then objFSO.CopyFile "user.js", (SystemDrive & "Program FilesMozilla Firefoxdefaultsprofileuser.js"), True End If
If objFSO.FileExists ("bookmarks.html") Then objFSO.CopyFile "bookmarks.html", (SystemDrive & "Program FilesMozilla Firefoxdefaultsprofilebookmarks.html"), True End If
If objFSO.FileExists (SystemDrive & "Documents and SettingsAll UsersDesktopMozilla Firefox.lnk") Then objFSO.DeleteFile (SystemDrive & "Documents and SettingsAll UsersDesktopMozilla Firefox.lnk"), True End If
If objFSO.FileExists (SystemDrive & "Documents and SettingsAll UsersStart MenuProgramsMozilla FirefoxMozilla Firefox (Safe Mode).lnk") Then objFSO.DeleteFile (SystemDrive & "Documents and SettingsAll UsersStart MenuProgramsMozilla FirefoxMozilla Firefox (Safe Mode).lnk"), True End If
Wscript.Quit
I think that's most of it (in a rough nutshell). Hopefully there will be an easier method to silent install the package with customizations someday (I know there are plenty of MSI packages out there that others have built, but I prefer knowing what's in my package when I'm deploying it to a few hundred workstations).
Alors qu'en pensez vous?? un peu fastidieu mais bon...
Babar a écrit :
Fabien LE LEZ a écrit :
On Tue, 08 Feb 2005 21:53:16 +0100, "Steph.K"
<kupecky.stephane@freeMAISPASGRATUIT.fr>:
Tu peux télécharger InstallCreator
Nsis est libre, et il marche très bien :-)
Mais sinon, pour Firefox, AMHA un .bat pourrait suffire...
ok pour le pt bat , mais dans un mode silence cela est-il possible?
pour eviter de cliker kom un ouf sur plusieurs poste... lros des
installations
j'ai trouvé un article! pour le sinteressés voici la marche a suivre (in
english)
1. Download the Mozilla Firefox installation, and then execute the
installation, but do not proceed to install the software.
3. Navigate to "C:Documents and SettingsYourUserNameLocal
SettingsTemp" and locate the folder containing the extracted Mozilla
Firefox files (it's best to clear out your Temp files and folders before
doing this step).
4. Copy the extracted files into a folder somewhere else on your hard
drive, then exit from the unfinished Mozilla Firefox installation.
5. Edit the "Config.ini" file located in the folder containing the
extracted files (use Notepad). Change "Run Mode = Silent" and all of the
"Show Dialog=TRUE" to "Show DialogúLSE" (change all of them except the
section titled "[Dialog Installing]", leave this one to TRUE). After
testing the basic installation, try editing the other settings to get
what you want.
6. Save the "AutoInstall.vbs" script in the folder containing the
extracted files.
7. Test your installation using the "AutoInstall.vbs" script.
8. Open Mozilla Firefox and make any preference changes you want using
either the GUI interface buttons and menus, or using "About:Config" in
the Address bar along the top of the window.
9. Close the Mozilla Firefox browser and then navigate to, and copy, the
"C:Documents and SettingsYourUserNameApplication
DataMozillaFirefoxProfilesxxxxxprefs.js" file to another location.
10. Edit the "prefs.js" file (use Notepad), removing any references to
the specific user account, and then save the file.
11. Rename and copy the file to "C:Program FilesMozilla
Firefoxdefaultsprofileuser.js".
12. Delete the "C:Documents and SettingsYourUserNameApplication
DataMozilla" folder, and then open Mozilla Firefox to test your new
default settings.
13. If desired, edit the "C:Program FilesMozilla
Firefoxdefaultsprofilebookmark.html" document if custom default
bookmarks are required (use Notepad or an HTML editor).
And here's the code for the "AutoInstall.vbs" script:
' Automatic Mozilla Firefox installation and configuration script.
Option Explicit
Dim WshShell, objFSO
On Error Resume Next
Set WshShell = WScript.CreateObject("WScript.Shell")
Set objFSO = CreateObject("Scripting.FileSystemObject")
' Executes the installation.
WshShell.Run "setup.exe", 1, False
' Verifies that the installation has completed (checks every two seconds).
While WshShell.AppActivate("Install Complete") = FALSE
wscript.sleep 2001
Wend
WScript.Sleep 502
'Brings the installer to the foreground.
WshShell.AppActivate "Install Complete"
WScript.Sleep 1003
'Sends keystroke to close the installation window.
WshShell.SendKeys "{ENTER}"
WScript.Sleep 3004
' OPTIONAL CUSTOMIZATIONS
' Configures Firefox preferences.
If objFSO.FileExists ("user.js") Then
objFSO.CopyFile "user.js", (SystemDrive & "Program FilesMozilla
Firefoxdefaultsprofileuser.js"), True
End If
If objFSO.FileExists ("bookmarks.html") Then
objFSO.CopyFile "bookmarks.html", (SystemDrive & "Program
FilesMozilla Firefoxdefaultsprofilebookmarks.html"), True
End If
If objFSO.FileExists (SystemDrive & "Documents and SettingsAll
UsersDesktopMozilla Firefox.lnk") Then
objFSO.DeleteFile (SystemDrive & "Documents and SettingsAll
UsersDesktopMozilla Firefox.lnk"), True
End If
If objFSO.FileExists (SystemDrive & "Documents and SettingsAll
UsersStart MenuProgramsMozilla FirefoxMozilla Firefox (Safe
Mode).lnk") Then
objFSO.DeleteFile (SystemDrive & "Documents and SettingsAll
UsersStart MenuProgramsMozilla FirefoxMozilla Firefox (Safe
Mode).lnk"), True
End If
Wscript.Quit
I think that's most of it (in a rough nutshell). Hopefully there will be
an easier method to silent install the package with customizations
someday (I know there are plenty of MSI packages out there that others
have built, but I prefer knowing what's in my package when I'm deploying
it to a few hundred workstations).
Alors qu'en pensez vous?? un peu fastidieu mais bon...
Nsis est libre, et il marche très bien :-) Mais sinon, pour Firefox, AMHA un .bat pourrait suffire...
ok pour le pt bat , mais dans un mode silence cela est-il possible? pour eviter de cliker kom un ouf sur plusieurs poste... lros des installations
j'ai trouvé un article! pour le sinteressés voici la marche a suivre (in english)
1. Download the Mozilla Firefox installation, and then execute the installation, but do not proceed to install the software. 3. Navigate to "C:Documents and SettingsYourUserNameLocal SettingsTemp" and locate the folder containing the extracted Mozilla Firefox files (it's best to clear out your Temp files and folders before doing this step). 4. Copy the extracted files into a folder somewhere else on your hard drive, then exit from the unfinished Mozilla Firefox installation. 5. Edit the "Config.ini" file located in the folder containing the extracted files (use Notepad). Change "Run Mode = Silent" and all of the "Show Dialog=TRUE" to "Show DialogúLSE" (change all of them except the section titled "[Dialog Installing]", leave this one to TRUE). After testing the basic installation, try editing the other settings to get what you want. 6. Save the "AutoInstall.vbs" script in the folder containing the extracted files. 7. Test your installation using the "AutoInstall.vbs" script.
8. Open Mozilla Firefox and make any preference changes you want using either the GUI interface buttons and menus, or using "About:Config" in the Address bar along the top of the window. 9. Close the Mozilla Firefox browser and then navigate to, and copy, the "C:Documents and SettingsYourUserNameApplication DataMozillaFirefoxProfilesxxxxxprefs.js" file to another location. 10. Edit the "prefs.js" file (use Notepad), removing any references to the specific user account, and then save the file. 11. Rename and copy the file to "C:Program FilesMozilla Firefoxdefaultsprofileuser.js". 12. Delete the "C:Documents and SettingsYourUserNameApplication DataMozilla" folder, and then open Mozilla Firefox to test your new default settings. 13. If desired, edit the "C:Program FilesMozilla Firefoxdefaultsprofilebookmark.html" document if custom default bookmarks are required (use Notepad or an HTML editor).
And here's the code for the "AutoInstall.vbs" script:
' Automatic Mozilla Firefox installation and configuration script.
Option Explicit Dim WshShell, objFSO
On Error Resume Next
Set WshShell = WScript.CreateObject("WScript.Shell") Set objFSO = CreateObject("Scripting.FileSystemObject")
' Executes the installation. WshShell.Run "setup.exe", 1, False
' Verifies that the installation has completed (checks every two seconds). While WshShell.AppActivate("Install Complete") = FALSE wscript.sleep 2001 Wend WScript.Sleep 502
'Brings the installer to the foreground. WshShell.AppActivate "Install Complete" WScript.Sleep 1003
'Sends keystroke to close the installation window. WshShell.SendKeys "{ENTER}" WScript.Sleep 3004
' OPTIONAL CUSTOMIZATIONS ' Configures Firefox preferences. If objFSO.FileExists ("user.js") Then objFSO.CopyFile "user.js", (SystemDrive & "Program FilesMozilla Firefoxdefaultsprofileuser.js"), True End If
If objFSO.FileExists ("bookmarks.html") Then objFSO.CopyFile "bookmarks.html", (SystemDrive & "Program FilesMozilla Firefoxdefaultsprofilebookmarks.html"), True End If
If objFSO.FileExists (SystemDrive & "Documents and SettingsAll UsersDesktopMozilla Firefox.lnk") Then objFSO.DeleteFile (SystemDrive & "Documents and SettingsAll UsersDesktopMozilla Firefox.lnk"), True End If
If objFSO.FileExists (SystemDrive & "Documents and SettingsAll UsersStart MenuProgramsMozilla FirefoxMozilla Firefox (Safe Mode).lnk") Then objFSO.DeleteFile (SystemDrive & "Documents and SettingsAll UsersStart MenuProgramsMozilla FirefoxMozilla Firefox (Safe Mode).lnk"), True End If
Wscript.Quit
I think that's most of it (in a rough nutshell). Hopefully there will be an easier method to silent install the package with customizations someday (I know there are plenty of MSI packages out there that others have built, but I prefer knowing what's in my package when I'm deploying it to a few hundred workstations).
Alors qu'en pensez vous?? un peu fastidieu mais bon...
Steph.K
Babar a écrit : [...]
En libre mais je ne l'ai jamais utilisé : http://www.framasoft.net/article1468.html
tu preconise a un soft ke tu n'a jamais essayé??
Je préconise rien du tout, j'indique au monsieur qu'il existe ce logiciel et qu'il est libre de l'essayer.
sinon connais tu d'autres logiciels libre de droit pour faire du deploy et creer tes installateurs perso? thks!
Non, désolé.
-- Steph.K
Babar a écrit :
[...]
En libre mais je ne l'ai jamais utilisé :
http://www.framasoft.net/article1468.html
tu preconise a un soft ke tu n'a jamais essayé??
Je préconise rien du tout, j'indique au monsieur qu'il existe ce
logiciel et qu'il est libre de l'essayer.
sinon connais tu d'autres logiciels libre de droit pour faire du deploy
et creer tes installateurs perso? thks!