I have a problem with Wd5.5 to WD10 migration.
>From WD10 I can open and migrate a WD5.5 analysis but after the
migration I can't see any window, report, procedure, .... of the WD5.5
project.
I've copied a window (fenetre) from the WD5.5 folder to the new WD10
folder but I get nothing.
However, I can see and work with the migrated analysis.
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
TLB
a écrit :
Hi everybody,
I have a problem with Wd5.5 to WD10 migration. >From WD10 I can open and migrate a WD5.5 analysis but after the migration I can't see any window, report, procedure, .... of the WD5.5 project.
I've copied a window (fenetre) from the WD5.5 folder to the new WD10 folder but I get nothing. However, I can see and work with the migrated analysis.
Any clue?
Thanks in advance.
Salutacions
You can't migrate a project in windev 5.5 to 10 directly. You'll have to first migrate your project 5.5 with a windev 7 or 7.5 or 8. Then you can migrate the project above 5.5 to the last version (10). Yes, the analysis in 5.5 can be read and/or migate in the 10 version. Cordialement. TLB.
jbistuer@yahoo.com a écrit :
Hi everybody,
I have a problem with Wd5.5 to WD10 migration.
>From WD10 I can open and migrate a WD5.5 analysis but after the
migration I can't see any window, report, procedure, .... of the WD5.5
project.
I've copied a window (fenetre) from the WD5.5 folder to the new WD10
folder but I get nothing.
However, I can see and work with the migrated analysis.
Any clue?
Thanks in advance.
Salutacions
You can't migrate a project in windev 5.5 to 10 directly.
You'll have to first migrate your project 5.5 with a windev 7 or 7.5 or
8. Then you can migrate the project above 5.5 to the last version (10).
Yes, the analysis in 5.5 can be read and/or migate in the 10 version.
Cordialement.
TLB.
I have a problem with Wd5.5 to WD10 migration. >From WD10 I can open and migrate a WD5.5 analysis but after the migration I can't see any window, report, procedure, .... of the WD5.5 project.
I've copied a window (fenetre) from the WD5.5 folder to the new WD10 folder but I get nothing. However, I can see and work with the migrated analysis.
Any clue?
Thanks in advance.
Salutacions
You can't migrate a project in windev 5.5 to 10 directly. You'll have to first migrate your project 5.5 with a windev 7 or 7.5 or 8. Then you can migrate the project above 5.5 to the last version (10). Yes, the analysis in 5.5 can be read and/or migate in the 10 version. Cordialement. TLB.
Michel HERRSCHER
Dans un message TLB disait :
a écrit :
Hi everybody,
I have a problem with Wd5.5 to WD10 migration.
From WD10 I can open and migrate a WD5.5 analysis but after the
migration I can't see any window, report, procedure, .... of the WD5.5 project.
.....
You can't migrate a project in windev 5.5 to 10 directly. You'll have to first migrate your project 5.5 with a windev 7 or 7.5 or 8. Then you can migrate the project above 5.5 to the last version (10).
just clarifcation : It is the 7 7.5 or 8 project that can be moved to 10.
....
-- Michel HERRSCHER CONSULTANT Tel : +33450870912 http://www.mhc.herrscher.fr Président WINDASSO - Association des utilisateurs WxxDEV(c) http://www.windasso.org
Dans un message TLB disait :
jbistuer@yahoo.com a écrit :
Hi everybody,
I have a problem with Wd5.5 to WD10 migration.
From WD10 I can open and migrate a WD5.5 analysis but after the
migration I can't see any window, report, procedure, .... of the WD5.5
project.
.....
You can't migrate a project in windev 5.5 to 10 directly.
You'll have to first migrate your project 5.5 with a windev 7 or 7.5 or
8. Then you can migrate the project above 5.5 to the last version (10).
just clarifcation : It is the 7 7.5 or 8 project that can be moved to 10.
....
--
Michel HERRSCHER CONSULTANT
Tel : +33450870912
http://www.mhc.herrscher.fr
Président WINDASSO - Association des utilisateurs WxxDEV(c)
http://www.windasso.org
From WD10 I can open and migrate a WD5.5 analysis but after the
migration I can't see any window, report, procedure, .... of the WD5.5 project.
.....
You can't migrate a project in windev 5.5 to 10 directly. You'll have to first migrate your project 5.5 with a windev 7 or 7.5 or 8. Then you can migrate the project above 5.5 to the last version (10).
just clarifcation : It is the 7 7.5 or 8 project that can be moved to 10.
....
-- Michel HERRSCHER CONSULTANT Tel : +33450870912 http://www.mhc.herrscher.fr Président WINDASSO - Association des utilisateurs WxxDEV(c) http://www.windasso.org
