Je voudrais faire fonctionner ma carte wifi.
Voici le message
dmesg | grep b43
[ 20.073281] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 20.104026] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[ 20.104039] b43-phy0 warning: 5 GHz band is unsupported on this PHY
[ 20.118484] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2)
[ 20.118489] b43 ssb0:0: Direct firmware load failed with error -2
[ 20.118491] b43 ssb0:0: Falling back to user helper
[ 20.119405] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2)
[ 20.119408] b43 ssb0:0: Direct firmware load failed with error -2
[ 20.119410] b43 ssb0:0: Falling back to user helper
[ 20.120479] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2=
)
[ 20.120483] b43 ssb0:0: Direct firmware load failed with error -2
[ 20.120485] b43 ssb0:0: Falling back to user helper
[ 20.120986] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2=
)
[ 20.120990] b43 ssb0:0: Direct firmware load failed with error -2
[ 20.120991] b43 ssb0:0: Falling back to user helper
[ 20.121706] b43-phy0 ERROR: You must go to
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
download the correct firmware for this driver version. Please
carefully read all instructions on this website.
O=C3=B9 les instructions ?
Une recherche me m=C3=A8ne ici
https://wiki.debian.org/bcm43xx#b43-b43legacy
For devices with a BCM4312 LP-PHY chip (PCI ID 14E4:4315), install
firmware-b43-lpphy-installer:
Je voudrais faire fonctionner ma carte wifi. Voici le message
dmesg | grep b43 [ 20.073281] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 20.104026] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1 [ 20.104039] b43-phy0 warning: 5 GHz band is unsupported on this PHY [ 20.118484] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2) [ 20.118489] b43 ssb0:0: Direct firmware load failed with error -2 [ 20.118491] b43 ssb0:0: Falling back to user helper [ 20.119405] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2) [ 20.119408] b43 ssb0:0: Direct firmware load failed with error -2 [ 20.119410] b43 ssb0:0: Falling back to user helper [ 20.120479] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2) [ 20.120483] b43 ssb0:0: Direct firmware load failed with error -2 [ 20.120485] b43 ssb0:0: Falling back to user helper [ 20.120986] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2) [ 20.120990] b43 ssb0:0: Direct firmware load failed with error -2 [ 20.120991] b43 ssb0:0: Falling back to user helper [ 20.121706] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
Où les instructions ?
Une recherche me mène ici https://wiki.debian.org/bcm43xx#b43-b43legacy For devices with a BCM4312 LP-PHY chip (PCI ID 14E4:4315), install firmware-b43-lpphy-installer:
Mais pas de version stable(jessie) ?
Quelqu'un a une idée ?
Merci d'avance.
-- Benoit
Bonjour,
Peut-être dans le paquet firmware-b43-installer Voir est ici : https://packages.debian.org/jessie/firmware-b43-installer
[...]
BCM4312 (with Low-Power a.k.a. LP-PHY). [...]
Le 20/01/2016 11:55, Benoit B a écrit :
Bonjour,
Je voudrais faire fonctionner ma carte wifi.
Voici le message
dmesg | grep b43
[ 20.073281] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 20.104026] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[ 20.104039] b43-phy0 warning: 5 GHz band is unsupported on this PHY
[ 20.118484] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2)
[ 20.118489] b43 ssb0:0: Direct firmware load failed with error -2
[ 20.118491] b43 ssb0:0: Falling back to user helper
[ 20.119405] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2)
[ 20.119408] b43 ssb0:0: Direct firmware load failed with error -2
[ 20.119410] b43 ssb0:0: Falling back to user helper
[ 20.120479] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2)
[ 20.120483] b43 ssb0:0: Direct firmware load failed with error -2
[ 20.120485] b43 ssb0:0: Falling back to user helper
[ 20.120986] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2)
[ 20.120990] b43 ssb0:0: Direct firmware load failed with error -2
[ 20.120991] b43 ssb0:0: Falling back to user helper
[ 20.121706] b43-phy0 ERROR: You must go to
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
download the correct firmware for this driver version. Please
carefully read all instructions on this website.
Où les instructions ?
Une recherche me mène ici
https://wiki.debian.org/bcm43xx#b43-b43legacy
For devices with a BCM4312 LP-PHY chip (PCI ID 14E4:4315), install
firmware-b43-lpphy-installer:
Mais pas de version stable(jessie) ?
Quelqu'un a une idée ?
Merci d'avance.
--
Benoit
Bonjour,
Peut-être dans le paquet firmware-b43-installer
Voir est ici :
https://packages.debian.org/jessie/firmware-b43-installer
Je voudrais faire fonctionner ma carte wifi. Voici le message
dmesg | grep b43 [ 20.073281] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 20.104026] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1 [ 20.104039] b43-phy0 warning: 5 GHz band is unsupported on this PHY [ 20.118484] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2) [ 20.118489] b43 ssb0:0: Direct firmware load failed with error -2 [ 20.118491] b43 ssb0:0: Falling back to user helper [ 20.119405] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2) [ 20.119408] b43 ssb0:0: Direct firmware load failed with error -2 [ 20.119410] b43 ssb0:0: Falling back to user helper [ 20.120479] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2) [ 20.120483] b43 ssb0:0: Direct firmware load failed with error -2 [ 20.120485] b43 ssb0:0: Falling back to user helper [ 20.120986] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2) [ 20.120990] b43 ssb0:0: Direct firmware load failed with error -2 [ 20.120991] b43 ssb0:0: Falling back to user helper [ 20.121706] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
Où les instructions ?
Une recherche me mène ici https://wiki.debian.org/bcm43xx#b43-b43legacy For devices with a BCM4312 LP-PHY chip (PCI ID 14E4:4315), install firmware-b43-lpphy-installer:
Mais pas de version stable(jessie) ?
Quelqu'un a une idée ?
Merci d'avance.
-- Benoit
Bonjour,
Peut-être dans le paquet firmware-b43-installer Voir est ici : https://packages.debian.org/jessie/firmware-b43-installer
[...]
BCM4312 (with Low-Power a.k.a. LP-PHY). [...]
Benoit B
Bonjour,
2016-01-20 11:01 GMT+00:00 Alexandre GRIVEAUX :
Bonjour,
Peut-être dans le paquet firmware-b43-installer Voir est ici : https://packages.debian.org/jessie/firmware-b43-installer