[OpenBSD-i386_3.8] : modem US Robot Ext. model 5686 non reconnu

Bonjour à tous!

J'aurais besoin de votre aide pour savoir quelle est la raison pour
laquelle mon modem US Robotics modèle 5686 Externe n'est
pas reconnu lors du boot du kernel generic de OpenBSD 3.8?

Pourtant ce modem fonctionne avec Linux. Voici mon dmesg lors du boot.

OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 349 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 335114240 (327260K)
avail mem = 298393600 (291400K)
using 4116 buffers containing 16859136 bytes (16464K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 06/04/98, BIOS32 rev. 0 @ 0xfd841
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2460/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 1 function 0 "S3 Trio3D AGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 83228D3>
wd0: 16-sector PIO, LBA, 3079MB, 6306048 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HITACHI, CDR-8430, 0024> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power" rev 0x02 at pci0 dev 2 function 3 not configured
xl0 at pci0 dev 20 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 11, address 00:60:97:e0:ef:e1
nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt1 at isa0 port 0x278/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
"ESS ES1868 Plug and Play AudioD, ESS0000, , " at isapnp0 port 0x800/8 not configured
ess0 at isapnp0 "ESS ES1868 Plug and Play AudioD, ESS1868, , " port 0x220/16,0x388/4,0x330/2 irq 5 drq 1,0: ESS Technology ES1868 [version 0x688b]
ess0: audio1 interrupting at irq 5
audio0 at ess0
opl0 at ess0: model OPL3
midi1 at opl0: <ESS Yamaha OPL3>
joy0 at isapnp0 "ESS ES1868 Plug and Play AudioD, ESS0001, , " port 0x201/1
biomask efcd netmask efcd ttymask ffcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 2 configuration 1 interface 0
umass0: DMI USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <WDC WD16, 00BB-00GUA0, 0 0> SCSI0 0/direct fixed
sd0: 152627MB, 152627 cyl, 64 head, 32 sec, 512 bytes/sec, 312581808 sec total
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Merci de votre aide!

--
nic