J'espère que qqun pourra m venir en aide, après des jours de galère je
n'arrive toujours pas à partager
mon imprimante (hp laserjet 1300). Pourtant j'arrive bien à imprimer une
page de test à partir du hote
où se tourne le serveur CUPs.
Seulement au voisinnage réseau d'un poste client, je ne vois aucune
imprimante.
Et quand j'utilise "rpcclient MONSERV -c enumprinters", j'ai No Returned
Printers.
Ce qui me laisse croire que Samba n'arrive pas à voir les imprimantes CUPS.
Pourquoi? ...
Le démons smbd ne lit-il pas le printcap file pour connaitre les
imprimantes à partager?
car ce fichier est bien créé.
Autres détails : l'imprimante est connecté au réseau via une interface
Ethernet (serveur hp JetDirect)
mais n'est pas intégrée au domaine local TOTO.
A vrai dire, je commence vraiment à m'y perdre,
Merci d'avance pour votre aide précieuse,
Karara.
Ci joint mon fichier smb.conf :
[global]
## Browsing/Identification ###
netbios name = MONSERV
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = TOTO
# server string is the equivalent of the NT Description field
server string = %L
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
# What naming service and in what order should we use to resolve host names
# to IP addresses
name resolve order = wins bcast lmhost host
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
; syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc
# package for details.
security = user
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
; guest account = nobody
; invalid users = root
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
; unix password sync = no
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Augustin Luton
<aluton@hybrigenics.fr> for
# sending the correct chat script for the passwd program in Debian Potato).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
*Retype\snew\sUNIX\spassword:* %n\n .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
; pam password change = no
# add user script = /usr/sbin/mkdir /var/samba/profiles/%u
########## Printing ##########
# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
printing = cups
printcap name = /etc/printcap
load printers = yes
# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
printer admin = @ntadmin
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
domain master = yes
domain logons = yes
preferred master = yes
os level = 254
#script de mise à jour de /usr/user, /usr/passwd et /usr/group
add user script = /usr/sbin/useradd -m %u
delete user script = /usr/sbin/userdel -r %u
add group script = /usr/sbin/groupadd %g
delete group script = /usr/sbin/groupdel %g
add user to group script = /usr/sbin/usermod -G %g %u
add machine script = /usr/sbin/useradd -s /bin/false -d /dev/null %m
#Répertoire utilisé par WinXP et WinNT pour stocker les profils
; logon home = \\%L\%u
; logon path = \\%L\profiles
logon drive = U:
logon script = logon.bat
# Affiche les partages par défaut
browseable = no
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
idmap uid = 10000-20000
idmap gid = 10000-20000
; template shell = /bin/bash
#------------------------ Contrôle des accès
;allow deny = all
;allow host = @CRCFP
; ;valid user = %u
;read only = no
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
; writable = yes
# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you
want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;directory mask = 0700
# Un-comment the following and create the netlogon directory for Domain
Logons
# (you need to configure Samba to act as a domain controller too.)
[printers]
comment = All Printers
browseable = no
path = /var/samba/spool
public = yes
guest ok = yes
printable = yes
writable = yes
write list = root,@ntadmin
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /etc/samba/drivers
browseable = yes
read only = yes
guest ok = yes
write list = root,@ntadmin
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger
Téléchargez cette version sur http://fr.messenger.yahoo.com
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
sbosek
essaie de remplacer ces param par:
printcap name = cups
[printers] path = "vérifie que le chemin indiqué est valide" browseable = yes (si tu veux les voir sur tes client windows... a propos as tu des client windows? Sinon ne t'embête pas avec samba ;) et va direct dans /etc/cups/client.conf sur tes clients et indique l'ip de ton serveur cups
Si tout ça ne fonctionne pas ... va nous falloir un peu de log
steve
Le 15 juil. 05, à 14:54, Karara 33 a écrit :
Bonjour les amis,
J'espère que qqun pourra m venir en aide, après des jours de galère je n'arrive toujours pas à partager mon imprimante (hp laserjet 1300). Pourtant j'arrive bien à imprimer une page de test à partir du hote où se tourne le serveur CUPs.
Seulement au voisinnage réseau d'un poste client, je ne vois aucune imprimante. Et quand j'utilise "rpcclient MONSERV -c enumprinters", j'ai No Returned Printers. Ce qui me laisse croire que Samba n'arrive pas à voir les imprimantes CUPS. Pourquoi? ...
Le démons smbd ne lit-il pas le printcap file pour connaitre les imprimantes à partager? car ce fichier est bien créé.
Autres détails : l'imprimante est connecté au réseau via une interface Ethernet (serveur hp JetDirect) mais n'est pas intégrée au domaine local TOTO.
A vrai dire, je commence vraiment à m'y perdre,
Merci d'avance pour votre aide précieuse,
Karara.
Ci joint mon fichier smb.conf :
[global]
## Browsing/Identification ### netbios name = MONSERV # Change this to the workgroup/NT-domain name your Samba server will part of workgroup = TOTO
# server string is the equivalent of the NT Description field server string = %L # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS. dns proxy = no
# What naming service and in what order should we use to resolve host names # to IP addresses name resolve order = wins bcast lmhost host
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb). max log size = 1000
# If you want Samba to only log through syslog then set the following # parameter to 'yes'. ; syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc # package for details. security = user
# You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what # password database type you are using. passdb backend = tdbsam
obey pam restrictions = yes
; guest account = nobody ; invalid users = root
# This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. ; unix password sync = no
# For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Augustin Luton for # sending the correct chat script for the passwd program in Debian Potato). passwd program = /usr/bin/passwd %u passwd chat = *EntersnewsUNIXspassword:* %nn *RetypesnewsUNIXspassword:* %nn .
# This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. ; pam password change = no
# add user script = /usr/sbin/mkdir /var/samba/profiles/%u
########## Printing ##########
# CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. printing = cups printcap name = /etc/printcap load printers = yes
# When using [print$], root is implicitly a 'printer admin', but you can # also give this right to other users to add drivers and set printer # properties printer admin = @ntadmin
############ Misc ############
# Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF92 SO_SNDBUF92 socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. domain master = yes domain logons = yes preferred master = yes os level = 254
#script de mise à jour de /usr/user, /usr/passwd et /usr/group add user script = /usr/sbin/useradd -m %u delete user script = /usr/sbin/userdel -r %u add group script = /usr/sbin/groupadd %g delete group script = /usr/sbin/groupdel %g add user to group script = /usr/sbin/usermod -G %g %u add machine script = /usr/sbin/useradd -s /bin/false -d /dev/null %m
#Répertoire utilisé par WinXP et WinNT pour stocker les profils ; logon home = %L%u ; logon path = %Lprofiles logon drive = U: logon script = logon.bat # Affiche les partages par défaut browseable = no
# Some defaults for winbind (make sure you're not using the ranges # for something else.) idmap uid = 10000-20000 idmap gid = 10000-20000 ; template shell = /bin/bash
#------------------------ Contrôle des accès ;allow deny = all ;allow host = @CRCFP
; ;valid user = %u ;read only = no # By default, the home directories are exported read-only. Change next # parameter to 'yes' if you want to be able to write to them. ; writable = yes # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ;create mask = 0700 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ;directory mask = 0700 # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.)
[printers] comment = All Printers browseable = no path = /var/samba/spool public = yes guest ok = yes printable = yes writable = yes write list = root,@ntadmin
# Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /etc/samba/drivers browseable = yes read only = yes guest ok = yes write list = root,@ntadmin
_______________________________________________________________________ ____ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com
-- Pensez à lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to with a subject of "unsubscribe". Trouble? Contact
essaie de remplacer ces param par:
printcap name = cups
[printers]
path = "vérifie que le chemin indiqué est valide"
browseable = yes (si tu veux les voir sur tes client windows... a
propos as tu des client windows? Sinon ne t'embête pas avec samba ;) et
va direct dans /etc/cups/client.conf sur tes clients et indique l'ip de
ton serveur cups
Si tout ça ne fonctionne pas ... va nous falloir un peu de log
steve
Le 15 juil. 05, à 14:54, Karara 33 a écrit :
Bonjour les amis,
J'espère que qqun pourra m venir en aide, après des jours de galère je
n'arrive toujours pas à partager
mon imprimante (hp laserjet 1300). Pourtant j'arrive bien à imprimer
une page de test à partir du hote
où se tourne le serveur CUPs.
Seulement au voisinnage réseau d'un poste client, je ne vois aucune
imprimante.
Et quand j'utilise "rpcclient MONSERV -c enumprinters", j'ai No
Returned Printers.
Ce qui me laisse croire que Samba n'arrive pas à voir les imprimantes
CUPS.
Pourquoi? ...
Le démons smbd ne lit-il pas le printcap file pour connaitre les
imprimantes à partager?
car ce fichier est bien créé.
Autres détails : l'imprimante est connecté au réseau via une interface
Ethernet (serveur hp JetDirect)
mais n'est pas intégrée au domaine local TOTO.
A vrai dire, je commence vraiment à m'y perdre,
Merci d'avance pour votre aide précieuse,
Karara.
Ci joint mon fichier smb.conf :
[global]
## Browsing/Identification ###
netbios name = MONSERV
# Change this to the workgroup/NT-domain name your Samba server will
part of
workgroup = TOTO
# server string is the equivalent of the NT Description field
server string = %L
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS
Server
wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT
both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
# What naming service and in what order should we use to resolve host
names
# to IP addresses
name resolve order = wins bcast lmhost host
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 1000
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
; syslog only = no
# We want Samba to log a minimum amount of information to syslog.
Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to
log
# through syslog you should set the following parameter to something
higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix
account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc
# package for details.
security = user
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. passdb backend = tdbsam
obey pam restrictions = yes
; guest account = nobody
; invalid users = root
# This boolean parameter controls whether Samba attempts to sync the
Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
; unix password sync = no
# For Unix password sync to work on a Debian GNU/Linux system, the
following
# parameters must be set (thanks to Augustin Luton
<aluton@hybrigenics.fr> for
# sending the correct chat script for the passwd program in Debian
Potato).
passwd program = /usr/bin/passwd %u
passwd chat = *EntersnewsUNIXspassword:* %nn
*RetypesnewsUNIXspassword:* %nn .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
; pam password change = no
# add user script = /usr/sbin/mkdir /var/samba/profiles/%u
########## Printing ##########
# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
printing = cups
printcap name = /etc/printcap
load printers = yes
# When using [print$], root is implicitly a 'printer admin', but you
can
# also give this right to other users to add drivers and set printer
# properties
printer admin = @ntadmin
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup
package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm
%s' &
# Domain Master specifies Samba to be the Domain Master Browser. If
this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is
recommended.
domain master = yes
domain logons = yes
preferred master = yes
os level = 254
#script de mise à jour de /usr/user, /usr/passwd et /usr/group
add user script = /usr/sbin/useradd -m %u
delete user script = /usr/sbin/userdel -r %u
add group script = /usr/sbin/groupadd %g
delete group script = /usr/sbin/groupdel %g
add user to group script = /usr/sbin/usermod -G %g %u
add machine script = /usr/sbin/useradd -s /bin/false -d /dev/null %m
#Répertoire utilisé par WinXP et WinNT pour stocker les profils
; logon home = \%L%u
; logon path = \%Lprofiles
logon drive = U:
logon script = logon.bat
# Affiche les partages par défaut
browseable = no
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
idmap uid = 10000-20000
idmap gid = 10000-20000
; template shell = /bin/bash
#------------------------ Contrôle des accès
;allow deny = all
;allow host = @CRCFP
; ;valid user = %u
;read only = no
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
; writable = yes
# File creation mask is set to 0700 for security reasons. If you want
to
# create files with group=rw permissions, set next parameter to 0775.
;create mask = 0700
# Directory creation mask is set to 0700 for security reasons. If you
want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;directory mask = 0700
# Un-comment the following and create the netlogon directory for
Domain Logons
# (you need to configure Samba to act as a domain controller too.)
[printers]
comment = All Printers
browseable = no
path = /var/samba/spool
public = yes
guest ok = yes
printable = yes
writable = yes
write list = root,@ntadmin
# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /etc/samba/drivers
browseable = yes
read only = yes
guest ok = yes
write list = root,@ntadmin
_______________________________________________________________________
____ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo!
Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
[printers] path = "vérifie que le chemin indiqué est valide" browseable = yes (si tu veux les voir sur tes client windows... a propos as tu des client windows? Sinon ne t'embête pas avec samba ;) et va direct dans /etc/cups/client.conf sur tes clients et indique l'ip de ton serveur cups
Si tout ça ne fonctionne pas ... va nous falloir un peu de log
steve
Le 15 juil. 05, à 14:54, Karara 33 a écrit :
Bonjour les amis,
J'espère que qqun pourra m venir en aide, après des jours de galère je n'arrive toujours pas à partager mon imprimante (hp laserjet 1300). Pourtant j'arrive bien à imprimer une page de test à partir du hote où se tourne le serveur CUPs.
Seulement au voisinnage réseau d'un poste client, je ne vois aucune imprimante. Et quand j'utilise "rpcclient MONSERV -c enumprinters", j'ai No Returned Printers. Ce qui me laisse croire que Samba n'arrive pas à voir les imprimantes CUPS. Pourquoi? ...
Le démons smbd ne lit-il pas le printcap file pour connaitre les imprimantes à partager? car ce fichier est bien créé.
Autres détails : l'imprimante est connecté au réseau via une interface Ethernet (serveur hp JetDirect) mais n'est pas intégrée au domaine local TOTO.
A vrai dire, je commence vraiment à m'y perdre,
Merci d'avance pour votre aide précieuse,
Karara.
Ci joint mon fichier smb.conf :
[global]
## Browsing/Identification ### netbios name = MONSERV # Change this to the workgroup/NT-domain name your Samba server will part of workgroup = TOTO
# server string is the equivalent of the NT Description field server string = %L # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS. dns proxy = no
# What naming service and in what order should we use to resolve host names # to IP addresses name resolve order = wins bcast lmhost host
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb). max log size = 1000
# If you want Samba to only log through syslog then set the following # parameter to 'yes'. ; syslog only = no
# We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc # package for details. security = user
# You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what # password database type you are using. passdb backend = tdbsam
obey pam restrictions = yes
; guest account = nobody ; invalid users = root
# This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. ; unix password sync = no
# For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Augustin Luton for # sending the correct chat script for the passwd program in Debian Potato). passwd program = /usr/bin/passwd %u passwd chat = *EntersnewsUNIXspassword:* %nn *RetypesnewsUNIXspassword:* %nn .
# This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. ; pam password change = no
# add user script = /usr/sbin/mkdir /var/samba/profiles/%u
########## Printing ##########
# CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. printing = cups printcap name = /etc/printcap load printers = yes
# When using [print$], root is implicitly a 'printer admin', but you can # also give this right to other users to add drivers and set printer # properties printer admin = @ntadmin
############ Misc ############
# Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF92 SO_SNDBUF92 socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. domain master = yes domain logons = yes preferred master = yes os level = 254
#script de mise à jour de /usr/user, /usr/passwd et /usr/group add user script = /usr/sbin/useradd -m %u delete user script = /usr/sbin/userdel -r %u add group script = /usr/sbin/groupadd %g delete group script = /usr/sbin/groupdel %g add user to group script = /usr/sbin/usermod -G %g %u add machine script = /usr/sbin/useradd -s /bin/false -d /dev/null %m
#Répertoire utilisé par WinXP et WinNT pour stocker les profils ; logon home = %L%u ; logon path = %Lprofiles logon drive = U: logon script = logon.bat # Affiche les partages par défaut browseable = no
# Some defaults for winbind (make sure you're not using the ranges # for something else.) idmap uid = 10000-20000 idmap gid = 10000-20000 ; template shell = /bin/bash
#------------------------ Contrôle des accès ;allow deny = all ;allow host = @CRCFP
; ;valid user = %u ;read only = no # By default, the home directories are exported read-only. Change next # parameter to 'yes' if you want to be able to write to them. ; writable = yes # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ;create mask = 0700 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ;directory mask = 0700 # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.)
[printers] comment = All Printers browseable = no path = /var/samba/spool public = yes guest ok = yes printable = yes writable = yes write list = root,@ntadmin
# Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /etc/samba/drivers browseable = yes read only = yes guest ok = yes write list = root,@ntadmin
_______________________________________________________________________ ____ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com
-- Pensez à lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to with a subject of "unsubscribe". Trouble? Contact