Bonjour, je n'arrive pas à graver mon iso de 3.3 Go. Je suis sur une Debian
Sid (noyau 2.4.21), j'utilise dvdrecord (installée avec apt-get).
Voila ce que me dit dvdrecord:
17:49 root@abraracourcix /home/backup# dvdrecord -v -eject speed=2
dev=1,0,0 -dao -ignsize -overburn 1.iso
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <bero@arklinux.org>
This program is free software; you can redistribute it and/or modify it
under
the terms of the GNU General Public License as published by the Free
Software
Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with
this program; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c1.81 01/04/20 Copyright
1988,1995,2000 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.05'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 3348 MB
Total size: 3845 MB (380:56.93) = 1714270 sectors
Lout start: 3845 MB (380:58/70) = 1714270 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 157789 Blocks current: 157789 Blocks remaining: -1556481
dvdrecord: WARNING: Data may not fit on current disk.
dvdrecord: Notice: Overburning active. Trying to write more than the
official disk capacity.
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer .. input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
dvdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
dvdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error
CDB: 5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
dvdrecord: Cannot send CUE sheet.
dvdrecord: fifo had 64 puts and 0 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
zsh: exit 255 dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize -overburn
1.iso
J'ai essayé de chercher un peu sur le net, mais je ne trouve pas vraiment de
réponse, alors si quelqu'un a une idée pour m'aider, merci !
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
Benoit Boccard
Benoit Boccard wrote:
Bonjour, je n'arrive pas à graver mon iso de 3.3 Go. Je suis sur une Debian Sid (noyau 2.4.21), j'utilise dvdrecord (installée avec apt-get). Voila ce que me dit dvdrecord: 17:49 /home/backup# dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize -overburn 1.iso dvdrtools v0.1.4 Portions (c) 2002-2003 Ark Linux This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. Based on: Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.25 Using libscg version 'bero-0.5a' dvdrecord: Warning: using inofficial version of libscg (bero-0.5a '@(#)scsitransp.c1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling'). atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identifikation : 'DVD_RW ND-1300A ' Revision : '1.05' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 1605632 = 1568 KB FIFO size : 4194304 = 4096 KB Track 01: data 3348 MB Total size: 3845 MB (380:56.93) = 1714270 sectors Lout start: 3845 MB (380:58/70) = 1714270 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) ATIP start of lead out: 157789 (35:05/64) Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 157789 Blocks current: 157789 Blocks remaining: -1556481 dvdrecord: WARNING: Data may not fit on current disk. dvdrecord: Notice: Overburning active. Trying to write more than the official disk capacity. Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer .. input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... dvdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1. dvdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error CDB: 5D 00 00 00 00 00 00 00 20 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 200s dvdrecord: Cannot send CUE sheet. dvdrecord: fifo had 64 puts and 0 gets. dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. zsh: exit 255 dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize -overburn 1.iso
J'ai essayé de chercher un peu sur le net, mais je ne trouve pas vraiment de réponse, alors si quelqu'un a une idée pour m'aider, merci !
Personne n'a la moindre idée d'un début de solution ?
Benoit Boccard wrote:
Bonjour, je n'arrive pas à graver mon iso de 3.3 Go. Je suis sur une Debian
Sid (noyau 2.4.21), j'utilise dvdrecord (installée avec apt-get).
Voila ce que me dit dvdrecord:
17:49 root@abraracourcix /home/backup# dvdrecord -v -eject speed=2
dev=1,0,0 -dao -ignsize -overburn 1.iso
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <bero@arklinux.org>
This program is free software; you can redistribute it and/or modify it
under
the terms of the GNU General Public License as published by the Free
Software
Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with
this program; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c1.81 01/04/20 Copyright
1988,1995,2000 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.05'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 3348 MB
Total size: 3845 MB (380:56.93) = 1714270 sectors
Lout start: 3845 MB (380:58/70) = 1714270 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 157789 Blocks current: 157789 Blocks remaining: -1556481
dvdrecord: WARNING: Data may not fit on current disk.
dvdrecord: Notice: Overburning active. Trying to write more than the
official disk capacity.
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer .. input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
dvdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
dvdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error
CDB: 5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
dvdrecord: Cannot send CUE sheet.
dvdrecord: fifo had 64 puts and 0 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
zsh: exit 255 dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize -overburn
1.iso
J'ai essayé de chercher un peu sur le net, mais je ne trouve pas vraiment de
réponse, alors si quelqu'un a une idée pour m'aider, merci !
Personne n'a la moindre idée d'un début de solution ?
Bonjour, je n'arrive pas à graver mon iso de 3.3 Go. Je suis sur une Debian Sid (noyau 2.4.21), j'utilise dvdrecord (installée avec apt-get). Voila ce que me dit dvdrecord: 17:49 /home/backup# dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize -overburn 1.iso dvdrtools v0.1.4 Portions (c) 2002-2003 Ark Linux This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. Based on: Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.25 Using libscg version 'bero-0.5a' dvdrecord: Warning: using inofficial version of libscg (bero-0.5a '@(#)scsitransp.c1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling'). atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identifikation : 'DVD_RW ND-1300A ' Revision : '1.05' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 1605632 = 1568 KB FIFO size : 4194304 = 4096 KB Track 01: data 3348 MB Total size: 3845 MB (380:56.93) = 1714270 sectors Lout start: 3845 MB (380:58/70) = 1714270 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) ATIP start of lead out: 157789 (35:05/64) Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 157789 Blocks current: 157789 Blocks remaining: -1556481 dvdrecord: WARNING: Data may not fit on current disk. dvdrecord: Notice: Overburning active. Trying to write more than the official disk capacity. Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer .. input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... dvdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1. dvdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error CDB: 5D 00 00 00 00 00 00 00 20 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 200s dvdrecord: Cannot send CUE sheet. dvdrecord: fifo had 64 puts and 0 gets. dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. zsh: exit 255 dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize -overburn 1.iso
J'ai essayé de chercher un peu sur le net, mais je ne trouve pas vraiment de réponse, alors si quelqu'un a une idée pour m'aider, merci !
Personne n'a la moindre idée d'un début de solution ?
Benoit Boccard
Benoit Boccard wrote:
Benoit Boccard wrote:
Bonjour, je n'arrive pas à graver mon iso de 3.3 Go. Je suis sur une Debian Sid (noyau 2.4.21), j'utilise dvdrecord (installée avec apt-get). Voila ce que me dit dvdrecord: 17:49 /home/backup# dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize -overburn 1.iso dvdrtools v0.1.4 Portions (c) 2002-2003 Ark Linux This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. Based on: Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.25 Using libscg version 'bero-0.5a' dvdrecord: Warning: using inofficial version of libscg (bero-0.5a '@(#)scsitransp.c1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling'). atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identifikation : 'DVD_RW ND-1300A ' Revision : '1.05' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 1605632 = 1568 KB FIFO size : 4194304 = 4096 KB Track 01: data 3348 MB Total size: 3845 MB (380:56.93) = 1714270 sectors Lout start: 3845 MB (380:58/70) = 1714270 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) ATIP start of lead out: 157789 (35:05/64) Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 157789 Blocks current: 157789 Blocks remaining: -1556481 dvdrecord: WARNING: Data may not fit on current disk. dvdrecord: Notice: Overburning active. Trying to write more than the official disk capacity. Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer .. input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... dvdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1. dvdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error CDB: 5D 00 00 00 00 00 00 00 20 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 200s dvdrecord: Cannot send CUE sheet. dvdrecord: fifo had 64 puts and 0 gets. dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. zsh: exit 255 dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize -overburn 1.iso
J'ai essayé de chercher un peu sur le net, mais je ne trouve pas vraiment de réponse, alors si quelqu'un a une idée pour m'aider, merci !
Personne n'a la moindre idée d'un début de solution ?
Et personne ne connait un newsgroup (de préférence en fr :)) où je pourrais trouver ma solution ? Je sui vraiment très embété .............. Merci
Benoit Boccard wrote:
Benoit Boccard wrote:
Bonjour, je n'arrive pas à graver mon iso de 3.3 Go. Je suis sur une
Debian
Sid (noyau 2.4.21), j'utilise dvdrecord (installée avec apt-get).
Voila ce que me dit dvdrecord:
17:49 root@abraracourcix /home/backup# dvdrecord -v -eject speed=2
dev=1,0,0 -dao -ignsize -overburn 1.iso
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <bero@arklinux.org>
This program is free software; you can redistribute it and/or modify it
under
the terms of the GNU General Public License as published by the Free
Software
Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT
ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more
details.
You should have received a copy of the GNU General Public License
along with
this program; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg
Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'bero-0.5a'
dvdrecord: Warning: using inofficial version of libscg (bero-0.5a
'@(#)scsitransp.c1.81 01/04/20 Copyright
1988,1995,2000 J. Schilling').
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-1300A '
Revision : '1.05'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 3348 MB
Total size: 3845 MB (380:56.93) = 1714270 sectors
Lout start: 3845 MB (380:58/70) = 1714270 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 157789 Blocks current: 157789 Blocks remaining: -1556481
dvdrecord: WARNING: Data may not fit on current disk.
dvdrecord: Notice: Overburning active. Trying to write more than the
official disk capacity.
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer .. input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
dvdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
dvdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error
CDB: 5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
dvdrecord: Cannot send CUE sheet.
dvdrecord: fifo had 64 puts and 0 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
zsh: exit 255 dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize
-overburn
1.iso
J'ai essayé de chercher un peu sur le net, mais je ne trouve pas
vraiment de
réponse, alors si quelqu'un a une idée pour m'aider, merci !
Personne n'a la moindre idée d'un début de solution ?
Et personne ne connait un newsgroup (de préférence en fr :)) où je
pourrais trouver ma solution ?
Je sui vraiment très embété ..............
Merci
Bonjour, je n'arrive pas à graver mon iso de 3.3 Go. Je suis sur une Debian Sid (noyau 2.4.21), j'utilise dvdrecord (installée avec apt-get). Voila ce que me dit dvdrecord: 17:49 /home/backup# dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize -overburn 1.iso dvdrtools v0.1.4 Portions (c) 2002-2003 Ark Linux This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. Based on: Cdrecord 1.11a15 (i386-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.25 Using libscg version 'bero-0.5a' dvdrecord: Warning: using inofficial version of libscg (bero-0.5a '@(#)scsitransp.c1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling'). atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : '_NEC ' Identifikation : 'DVD_RW ND-1300A ' Revision : '1.05' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 1605632 = 1568 KB FIFO size : 4194304 = 4096 KB Track 01: data 3348 MB Total size: 3845 MB (380:56.93) = 1714270 sectors Lout start: 3845 MB (380:58/70) = 1714270 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) ATIP start of lead out: 157789 (35:05/64) Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 157789 Blocks current: 157789 Blocks remaining: -1556481 dvdrecord: WARNING: Data may not fit on current disk. dvdrecord: Notice: Overburning active. Trying to write more than the official disk capacity. Starting to write CD/DVD at speed 4 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer .. input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... dvdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1. dvdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error CDB: 5D 00 00 00 00 00 00 00 20 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 200s dvdrecord: Cannot send CUE sheet. dvdrecord: fifo had 64 puts and 0 gets. dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. zsh: exit 255 dvdrecord -v -eject speed=2 dev=1,0,0 -dao -ignsize -overburn 1.iso
J'ai essayé de chercher un peu sur le net, mais je ne trouve pas vraiment de réponse, alors si quelqu'un a une idée pour m'aider, merci !
Personne n'a la moindre idée d'un début de solution ?
Et personne ne connait un newsgroup (de préférence en fr :)) où je pourrais trouver ma solution ? Je sui vraiment très embété .............. Merci
