Périphériques USB

Bonjour/Bonsoir,

J'ai un souci avec mes périphériques USB, je suis sous debian sid et
aucun de mes périphériques usb ne peut fonctionnner faute d'attribution
d'adresse (device not accepting address)
:'(
voici mon syslog de démarrage (désolée je laisse tout et si vous
remarquez d'autres choses anormales, dites-le moi s'il vous plait) :

Feb 15 21:25:56 pc syslogd 1.4.1#16: restart.
Feb 15 21:25:56 pc kernel: klogd 1.4.1#16, log source = /proc/kmsg started.
Feb 15 21:25:56 pc kernel: Inspecting /boot/System.map-2.6.7
Feb 15 21:25:56 pc kernel: Loaded 24508 symbols from /boot/System.map-2.6.7.
Feb 15 21:25:56 pc kernel: Symbols match kernel version 2.6.7.
Feb 15 21:25:56 pc kernel: No module symbols loaded - kernel modules not
enabled.
Feb 15 21:25:56 pc kernel: Linux version 2.6.7 (bulma@pc) (version gcc
3.3.5 (Debian 1:3.3.5-3)) #6 Sat Jan 15 23:00:19 CET 2005
Feb 15 21:25:56 pc kernel: BIOS-provided physical RAM map:
Feb 15 21:25:56 pc kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Feb 15 21:25:56 pc kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Feb 15 21:25:56 pc kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Feb 15 21:25:56 pc kernel: BIOS-e820: 0000000000100000 -
000000001fff0000 (usable)
Feb 15 21:25:56 pc kernel: BIOS-e820: 000000001fff0000 -
000000001fff3000 (ACPI NVS)
Feb 15 21:25:56 pc kernel: BIOS-e820: 000000001fff3000 -
0000000020000000 (ACPI data)
Feb 15 21:25:56 pc kernel: BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
Feb 15 21:25:56 pc kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Feb 15 21:25:56 pc kernel: BIOS-e820: 00000000ffff0000 -
0000000100000000 (reserved)
Feb 15 21:25:56 pc kernel: 511MB LOWMEM available.
Feb 15 21:25:56 pc kernel: On node 0 totalpages: 131056
Feb 15 21:25:56 pc kernel: DMA zone: 4096 pages, LIFO batch:1
Feb 15 21:25:56 pc kernel: Normal zone: 126960 pages, LIFO batch:16
Feb 15 21:25:56 pc kernel: HighMem zone: 0 pages, LIFO batch:1
Feb 15 21:25:56 pc kernel: DMI 2.2 present.
Feb 15 21:25:56 pc kernel: ACPI: RSDP (v000
Nvidia ) @ 0x000f75c0
Feb 15 21:25:56 pc kernel: ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31
AWRD 0x00000000) @ 0x1fff3000
Feb 15 21:25:56 pc kernel: ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31
AWRD 0x00000000) @ 0x1fff3040
Feb 15 21:25:56 pc kernel: ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31
AWRD 0x00000000) @ 0x1fff74c0
Feb 15 21:25:56 pc kernel: ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000
MSFT 0x0100000e) @ 0x00000000
Feb 15 21:25:56 pc kernel: Built 1 zonelists
Feb 15 21:25:56 pc kernel: Kernel command line: BOOT_IMAGE=Linux-2.6.7
ro root=302 apic=off lapic=off
Feb 15 21:25:56 pc kernel: Initializing CPU#0
Feb 15 21:25:56 pc kernel: PID hash table entries: 2048 (order 11: 16384
bytes)
Feb 15 21:25:56 pc kernel: Detected 1664.457 MHz processor.
Feb 15 21:25:56 pc kernel: Using tsc for high-res timesource
Feb 15 21:25:56 pc kernel: Console: colour VGA+ 80x25
Feb 15 21:25:56 pc kernel: Memory: 516880k/524224k available (1489k
kernel code, 6580k reserved, 654k data, 104k init, 0k highmem)
Feb 15 21:25:56 pc kernel: Checking if this processor honours the WP bit
even in supervisor mode... Ok.
Feb 15 21:25:56 pc kernel: Calibrating delay loop... 3284.99 BogoMIPS
Feb 15 21:25:56 pc kernel: Dentry cache hash table entries: 65536
(order: 6, 262144 bytes)
Feb 15 21:25:56 pc kernel: Inode-cache hash table entries: 32768 (order:
5, 131072 bytes)
Feb 15 21:25:56 pc kernel: Mount-cache hash table entries: 512 (order:
0, 4096 bytes)
Feb 15 21:25:56 pc kernel: CPU: After generic identify, caps:
0383fbff c1c3fbff 00000000 00000000
Feb 15 21:25:56 pc kernel: CPU: After vendor identify, caps:
0383fbff c1c3fbff 00000000 00000000
Feb 15 21:25:56 pc kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache
64K (64 bytes/line)
Feb 15 21:25:56 pc kernel: CPU: L2 Cache: 256K (64 bytes/line)
Feb 15 21:25:56 pc kernel: CPU: After all inits, caps: 0383fbff
c1c3fbff 00000000 00000020
Feb 15 21:25:56 pc kernel: Intel machine check architecture supported.
Feb 15 21:25:56 pc kernel: Intel machine check reporting enabled on CPU#0.
Feb 15 21:25:56 pc kernel: CPU: AMD Athlon(tm) XP 2000+ stepping 02
Feb 15 21:25:56 pc kernel: Enabling fast FPU save and restore... done.
Feb 15 21:25:56 pc kernel: Enabling unmasked SIMD FPU exception
support... done.
Feb 15 21:25:56 pc kernel: Checking 'hlt' instruction... OK.
Feb 15 21:25:56 pc kernel: NET: Registered protocol family 16
Feb 15 21:25:56 pc kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb4a0,
last bus=2
Feb 15 21:25:56 pc kernel: PCI: Using configuration type 1
Feb 15 21:25:56 pc kernel: mtrr: v2.0 (20020519)
Feb 15 21:25:56 pc kernel: PCI: Probing PCI hardware
Feb 15 21:25:56 pc kernel: PCI: Probing PCI hardware (bus 00)
Feb 15 21:25:56 pc kernel: PCI: nForce2 C1 Halt Disconnect fixup
Feb 15 21:25:56 pc kernel: PCI: Discovered primary peer bus ff [IRQ]
Feb 15 21:25:56 pc kernel: PCI: Using IRQ router default [10de/01e0] at
0000:00:00.0
Feb 15 21:25:56 pc kernel: Machine check exception polling timer started.
Feb 15 21:25:56 pc kernel: Initializing Cryptographic API
Feb 15 21:25:56 pc kernel: Linux agpgart interface v0.100 (c) Dave Jones
Feb 15 21:25:56 pc kernel: Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
Feb 15 21:25:56 pc kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Feb 15 21:25:56 pc kernel: NFORCE2: IDE controller at PCI slot 0000:00:09.0
Feb 15 21:25:56 pc kernel: NFORCE2: chipset revision 162
Feb 15 21:25:56 pc kernel: NFORCE2: not 100%% native mode: will probe
irqs later
Feb 15 21:25:56 pc kernel: NFORCE2: BIOS didn't set cable bits
correctly. Enabling workaround.
Feb 15 21:25:56 pc kernel: NFORCE2: BIOS didn't set cable bits
correctly. Enabling workaround.
Feb 15 21:25:56 pc kernel: NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
Feb 15 21:25:56 pc kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS
settings: hda:DMA, hdb:DMA
Feb 15 21:25:56 pc kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS
settings: hdc:DMA, hdd:DMA
Feb 15 21:25:56 pc kernel: hda: ST360015A, ATA DISK drive
Feb 15 21:25:56 pc kernel: hdb: SONY DVD RW DRU-510A, ATAPI CD/DVD-ROM drive
Feb 15 21:25:56 pc kernel: Using anticipatory io scheduler
Feb 15 21:25:56 pc kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 15 21:25:56 pc kernel: hdc: HDS722516VLAT80, ATA DISK drive
Feb 15 21:25:56 pc kernel: hdd: Maxtor 6Y080L0, ATA DISK drive
Feb 15 21:25:56 pc kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb 15 21:25:56 pc kernel: hda: max request size: 128KiB
Feb 15 21:25:56 pc kernel: hda: 117231408 sectors (60022 MB) w/2048KiB
Cache, CHS=65535/16/63, UDMA(100)
Feb 15 21:25:56 pc kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
Feb 15 21:25:56 pc kernel: hdc: max request size: 1024KiB
Feb 15 21:25:56 pc kernel: hdc: 321672960 sectors (164696 MB) w/7938KiB
Cache, CHS=20023/255/63, UDMA(100)
Feb 15 21:25:56 pc kernel: hdc: hdc1 hdc2
Feb 15 21:25:56 pc kernel: hdd: max request size: 128KiB
Feb 15 21:25:56 pc kernel: hdd: 160086528 sectors (81964 MB) w/2048KiB
Cache, CHS=65535/16/63, UDMA(133)
Feb 15 21:25:56 pc kernel: hdd: hdd1
Feb 15 21:25:56 pc kernel: mice: PS/2 mouse device common for all mice
Feb 15 21:25:56 pc kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 15 21:25:56 pc kernel: input: ImPS/2 Generic Wheel Mouse on
isa0060/serio1
Feb 15 21:25:56 pc kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 15 21:25:56 pc kernel: input: AT Translated Set 2 keyboard on
isa0060/serio0
Feb 15 21:25:56 pc kernel: NET: Registered protocol family 2
Feb 15 21:25:56 pc kernel: IP: routing cache hash table of 4096 buckets,
32Kbytes
Feb 15 21:25:56 pc kernel: TCP: Hash tables configured (established
32768 bind 65536)
Feb 15 21:25:56 pc kernel: NET: Registered protocol family 1
Feb 15 21:25:56 pc kernel: NET: Registered protocol family 17
Feb 15 21:25:56 pc kernel: kjournald starting. Commit interval 5 seconds
Feb 15 21:25:56 pc kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Feb 15 21:25:56 pc kernel: VFS: Mounted root (ext3 filesystem) readonly.
Feb 15 21:25:56 pc kernel: Freeing unused kernel memory: 104k freed
Feb 15 21:25:56 pc kernel: hdb: ATAPI 31X DVD-ROM DVD-R CD-R/RW drive,
8192kB Cache, UDMA(33)
Feb 15 21:25:56 pc kernel: Uniform CD-ROM driver Revision: 3.20
Feb 15 21:25:56 pc kernel: Adding 514072k swap on /dev/hda3.
Priority:-1 extents:1
Feb 15 21:25:56 pc kernel: EXT3 FS on hda2, internal journal
Feb 15 21:25:56 pc kernel: Real Time Clock Driver v1.12
Feb 15 21:25:56 pc kernel: kjournald starting. Commit interval 5 seconds
Feb 15 21:25:56 pc kernel: EXT3 FS on hda5, internal journal
Feb 15 21:25:56 pc kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Feb 15 21:25:56 pc kernel: ReiserFS: hdc1: found reiserfs format "3.6"
with standard journal
Feb 15 21:25:56 pc kernel: ReiserFS: hdc1: using ordered data mode
Feb 15 21:25:56 pc kernel: ReiserFS: hdc1: journal params: device hdc1,
size 8192, journal first block 18, max trans len 1024, max batch 900,
max commit age 30, max trans age 30
Feb 15 21:25:56 pc kernel: ReiserFS: hdc1: checking transaction log (hdc1)
Feb 15 21:25:56 pc kernel: ReiserFS: hdc1: Using r5 hash to sort names
Feb 15 21:25:56 pc kernel: usbcore: registered new driver usbfs
Feb 15 21:25:56 pc kernel: usbcore: registered new driver hub
Feb 15 21:25:56 pc kernel: ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host
Controller (OHCI) Driver (PCI)
Feb 15 21:25:56 pc kernel: ohci_hcd: block sizes: ed 64 td 64
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:00:02.0: nVidia Corporation
nForce2 USB Controller
Feb 15 21:25:56 pc kernel: PCI: Setting latency timer of device
0000:00:02.0 to 64
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:00:02.0: irq 11, pci mem e090f000
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:00:02.0: new USB bus
registered, assigned bus number 1
Feb 15 21:25:56 pc kernel: hub 1-0:1.0: USB hub found
Feb 15 21:25:56 pc kernel: hub 1-0:1.0: 3 ports detected
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:00:02.1: nVidia Corporation
nForce2 USB Controller (#2)
Feb 15 21:25:56 pc kernel: PCI: Setting latency timer of device
0000:00:02.1 to 64
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:00:02.1: irq 5, pci mem e091f000
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:00:02.1: new USB bus
registered, assigned bus number 2
Feb 15 21:25:56 pc kernel: hub 2-0:1.0: USB hub found
Feb 15 21:25:56 pc kernel: hub 2-0:1.0: 3 ports detected
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:01:07.0: NEC Corporation USB
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:01:07.0: irq 11, pci mem e092f000
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:01:07.0: new USB bus
registered, assigned bus number 3
Feb 15 21:25:56 pc kernel: hub 3-0:1.0: USB hub found
Feb 15 21:25:56 pc kernel: hub 3-0:1.0: 3 ports detected
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:01:07.1: NEC Corporation USB (#2)
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:01:07.1: irq 5, pci mem e0931000
Feb 15 21:25:56 pc kernel: ohci_hcd 0000:01:07.1: new USB bus
registered, assigned bus number 4
Feb 15 21:25:56 pc kernel: hub 4-0:1.0: USB hub found
Feb 15 21:25:56 pc kernel: hub 4-0:1.0: 2 ports detected
Feb 15 21:25:56 pc kernel: usb 3-2: new full speed USB device using
address 2
Feb 15 21:25:56 pc kernel: ehci_hcd 0000:00:02.2: nVidia Corporation
nForce2 USB Controller
Feb 15 21:25:56 pc kernel: PCI: Setting latency timer of device
0000:00:02.2 to 64
Feb 15 21:25:56 pc kernel: ehci_hcd 0000:00:02.2: irq 11, pci mem e0933000
Feb 15 21:25:56 pc kernel: ehci_hcd 0000:00:02.2: new USB bus
registered, assigned bus number 5
Feb 15 21:25:56 pc kernel: irq 11: nobody cared!
Feb 15 21:25:56 pc kernel: [__report_bad_irq+42/144]
__report_bad_irq+0x2a/0x90
Feb 15 21:25:56 pc kernel: [note_interrupt+112/160]
note_interrupt+0x70/0xa0
Feb 15 21:25:56 pc kernel: [do_IRQ+289/304] do_IRQ+0x121/0x130
Feb 15 21:25:56 pc kernel: [common_interrupt+24/32]
common_interrupt+0x18/0x20
Feb 15 21:25:56 pc kernel: [__do_softirq+48/128] __do_softirq+0x30/0x80
Feb 15 21:25:56 pc kernel: [do_softirq+38/48] do_softirq+0x26/0x30
Feb 15 21:25:56 pc kernel: [do_IRQ+253/304] do_IRQ+0xfd/0x130
Feb 15 21:25:56 pc kernel: [common_interrupt+24/32]
common_interrupt+0x18/0x20
Feb 15 21:25:56 pc kernel: [pci_bus_read_config_byte+95/144]
pci_bus_read_config_byte+0x5f/0x90
Feb 15 21:25:56 pc kernel: [__crc_agp_memory_reserved+717778/7539436]
ehci_start+0x2ce/0x360 [ehci_hcd]
Feb 15 21:25:56 pc kernel: [printk+269/368] printk+0x10d/0x170
Feb 15 21:25:56 pc kernel: [__crc_agp_memory_reserved+754987/7539436]
usb_register_bus+0x137/0x160 [usbcore]
Feb 15 21:25:56 pc kernel: [__crc_agp_memory_reserved+775551/7539436]
usb_hcd_pci_probe+0x2ab/0x4e0 [usbcore]
Feb 15 21:25:56 pc kernel: [pci_device_probe_static+82/112]
pci_device_probe_static+0x52/0x70
Feb 15 21:25:56 pc kernel: [__pci_device_probe+59/80]
__pci_device_probe+0x3b/0x50
Feb 15 21:25:56 pc kernel: [pci_device_probe+44/80]
pci_device_probe+0x2c/0x50
Feb 15 21:25:56 pc kernel: [bus_match+63/112] bus_match+0x3f/0x70
Feb 15 21:25:56 pc kernel: [driver_attach+89/144] driver_attach+0x59/0x90
Feb 15 21:25:56 pc kernel: [bus_add_driver+145/176]
bus_add_driver+0x91/0xb0
Feb 15 21:25:56 pc kernel: [driver_register+47/64]
driver_register+0x2f/0x40
Feb 15 21:25:56 pc kernel: [pci_register_driver+92/144]
pci_register_driver+0x5c/0x90
Feb 15 21:25:56 pc kernel: [__crc_agp_memory_reserved+458839/7539436]
init+0x23/0x30 [ehci_hcd]
Feb 15 21:25:56 pc kernel: [sys_init_module+276/560]
sys_init_module+0x114/0x230
Feb 15 21:25:56 pc kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Feb 15 21:25:56 pc kernel:
Feb 15 21:25:56 pc kernel: handlers:
Feb 15 21:25:56 pc kernel: [__crc_agp_memory_reserved+758548/7539436]
(usb_hcd_irq+0x0/0x70 [usbcore])
Feb 15 21:25:56 pc last message repeated 2 times
Feb 15 21:25:56 pc kernel: Disabling IRQ #11
Feb 15 21:25:56 pc kernel: PCI: cache line size of 64 is not supported
by device 0000:00:02.2
Feb 15 21:25:56 pc kernel: ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI
1.00, driver 2004-May-10
Feb 15 21:25:56 pc kernel: hub 5-0:1.0: USB hub found
Feb 15 21:25:56 pc kernel: hub 5-0:1.0: 6 ports detected
Feb 15 21:25:56 pc kernel: ehci_hcd 0000:01:07.2: NEC Corporation USB 2.0
Feb 15 21:25:56 pc kernel: ehci_hcd 0000:01:07.2: irq 11, pci mem e0935000
Feb 15 21:25:56 pc kernel: ehci_hcd 0000:01:07.2: new USB bus
registered, assigned bus number 6
Feb 15 21:25:56 pc kernel: ehci_hcd 0000:01:07.2: USB 2.0 enabled, EHCI
1.00, driver 2004-May-10
Feb 15 21:25:56 pc kernel: hub 6-0:1.0: USB hub found
Feb 15 21:25:56 pc kernel: hub 6-0:1.0: 5 ports detected
Feb 15 21:25:56 pc kernel: usb 6-3: new high speed USB device using
address 2
Feb 15 21:25:56 pc kernel: PCI: Setting latency timer of device
0000:00:06.0 to 64
Feb 15 21:25:56 pc kernel: intel8x0_measure_ac97_clock: measured 49344 usecs
Feb 15 21:25:56 pc kernel: intel8x0: clocking to 47370
Feb 15 21:25:56 pc kernel: 8139too Fast Ethernet driver 0.9.27
Feb 15 21:25:56 pc kernel: eth0: RealTek RTL8139 at 0x9000,
00:50:fc:23:1d:22, IRQ 5
Feb 15 21:25:56 pc kernel: eth0: Identified 8139 chip type 'RTL-8139C'
Feb 15 21:25:56 pc kernel: usb 6-3: control timeout on ep0out
Feb 15 21:25:56 pc kernel: ehci_hcd 0000:01:07.2: Unlink after no-IRQ?
Different ACPI or APIC settings may help.
Feb 15 21:25:56 pc kernel: usb 3-2: control timeout on ep0in
Feb 15 21:25:56 pc kernel: usb 6-3: control timeout on ep0out
Feb 15 21:25:56 pc kernel: usb 6-3: device not accepting address 2,
error -110
Feb 15 21:25:56 pc kernel: usb 6-3: new high speed USB device using
address 3
Feb 15 21:25:56 pc kernel: usb 6-3: control timeout on ep0out
Feb 15 21:25:56 pc kernel: usb 6-3: control timeout on ep0out
Feb 15 21:25:56 pc kernel: usb 6-3: device not accepting address 3,
error -110
Feb 15 21:25:56 pc kernel: SysRq : SAK
Feb 15 21:25:56 pc kernel: SAK: killed process 160 (init):
p->signal->session==tty->session
Feb 15 21:25:56 pc kernel: SAK: killed process 163 (rcS):
p->signal->session==tty->session
Feb 15 21:25:56 pc kernel: SAK: killed process 588 (S40hotplug):
p->signal->session==tty->session
Feb 15 21:25:56 pc kernel: SAK: killed process 1564 (usb.rc):
p->signal->session==tty->session
Feb 15 21:25:56 pc kernel: SAK: killed process 1575 (grep):
p->signal->session==tty->session
Feb 15 21:25:58 pc postfix/postfix-script: starting the Postfix mail system
Feb 15 21:25:58 pc postfix/master[1719]: daemon started -- version 2.1.5
Feb 15 21:26:00 pc xfs: ignoring font path element
/usr/lib/X11/fonts/cyrillic/ (unreadable)
Feb 15 21:26:00 pc xfs: ignoring font path element
/usr/lib/X11/fonts/CID (unreadable)
Feb 15 21:26:00 pc rpc.statd[1893]: Version 1.0.6 Starting
Feb 15 21:26:00 pc rpc.statd[1893]: statd running as root. chown
/var/lib/nfs/sm to choose different user
Feb 15 21:26:00 pc rpc.statd[1893]: unable to register (statd, 1, udp).
Feb 15 21:26:00 pc Xprt_64: lpstat: Unable to connect to server: Network
is unreachable
Feb 15 21:26:01 pc proftpd[1938]: pc - ProFTPD 1.2.10 (stable) (built do
mrt 22 18:28:32 CET 2001) standalone mode STARTUP
Feb 15 21:26:01 pc /usr/sbin/cron[1943]: (CRON) INFO (pidfile fd = 3)
Feb 15 21:26:01 pc /usr/sbin/cron[1944]: (CRON) STARTUP (fork ok)
Feb 15 21:26:01 pc Xprt_64: No matching visual for __GLcontextMode with
visual class = 0 (32775), nplanes = 8
Feb 15 21:26:01 pc /usr/sbin/cron[1944]: (CRON) INFO (Running @reboot jobs)
Feb 15 21:26:02 pc udev[1972]: creating device node '/dev/vcs2'
Feb 15 21:26:02 pc udev[1979]: creating device node '/dev/vcs3'
Feb 15 21:26:02 pc udev[1986]: creating device node '/dev/vcsa2'
Feb 15 21:26:02 pc udev[1990]: creating device node '/dev/vcsa3'
Feb 15 21:26:02 pc udev[2000]: creating device node '/dev/vcs5'
Feb 15 21:26:02 pc udev[2007]: creating device node '/dev/vcs6'
Feb 15 21:26:02 pc udev[2013]: creating device node '/dev/vcsa5'
Feb 15 21:26:02 pc udev[2018]: creating device node '/dev/vcs4'
Feb 15 21:26:02 pc udev[2035]: creating device node '/dev/vcsa6'
Feb 15 21:26:02 pc udev[2036]: creating device node '/dev/vcsa4'
Feb 15 21:26:02 pc udev[2044]: creating device node '/dev/vcs7'
Feb 15 21:26:02 pc udev[2051]: creating device node '/dev/vcsa7'
Feb 15 21:26:05 pc kernel: [drm] Initialized radeon 1.11.0 20020828 on
minor 0: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
Feb 15 21:26:05 pc kernel: [drm:radeon_cp_init] *ERROR* radeon_cp_init
called without lock held
Feb 15 21:26:05 pc kernel: [drm:radeon_unlock] *ERROR* Process 2014
using kernel context 0
Feb 15 21:26:05 pc udev[2077]: creating device node '/dev/radeon'

Je vois pas pkoi ça ne marche pas, malgré le apic=off et lapic=off et
dans le bios j'ai mis l'attibution IRQ en manuel (cété en auto avant
mais pareil ça ne marchais pas)

Merci pour votre aide :)

Annabelle D.


--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench

Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"

To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org