De mani=E8re r=E9guli=E8re depuis quelques jours, alors que je=20
suis en train de surfer, je perds ma connection Noos. Si=20
j'=E9teins le modem puis le rallume, cela ne marche=20
toujours pas. Il faut que je red=E9marre le PC pour que=20
cela remarche.
Avec l'utilitaire grenouille.exe, si j'essaie de tester=20
la connexion, il me met erreur Winsock.
Par ailleurs, j'ai essay=E9 Ex=E9cuter > sfc /scannow avec=20
mon CD XP Familiale (version de mise =E0 jour vers XP) dans=20
le lecteur et il me demande la SP1 Professionnel.=20
Pourquoi ?
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
loic.bougheriou
willow,
la methode suivante permet de reinstaller winsock, je ne te cache pas qu'elle est un peu lourde mais bon, si tu ne veux pas tout reinstaller :
Export and Delete the Corrupted Registry Subkeys 1. Insert a floppy disk in the floppy disk drive of the computer whose registry entries you are exporting. 2. Click "Start", and then click "Run". 3. In the "Open" box, type "regedit" (without the quotation marks), and then click "OK". 4. Locate and click the following registry subkey:
"HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesWinsock" 5. On the "File" menu, click "Export". In the "Save in" box, click "3? Floppy (A:)", type a name for the file in the "File name" box, and then click "Save". 6. Right-click "Winsock", and then click "Delete". When you are prompted to confirm the deletion, click "Yes". 7. Repeat steps 3 through 5 for the following subkey:
"HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesWinsock2"Note Each ".reg" file that you save must have a different name. 8. Right-click "Winsock2", click "Delete", and then click "Yes". 9. Restart the computer. Note Restart the computer after you delete the "Winsock" and "Winsock2" registry subkeys.
Remove TCP/IP on a Windows 2000-based Computer 1. Log on to Windows as Administrator. 2. In Control Panel, double-click "Network Connections", right-click "Local Area Connection", and then click "Properties". 3. Under "This component uses the following items", click "Internet Protocol (TCP/IP)", and then click "Uninstall". 4. Follow the instructions on the screen to remove TCP/IP. 5. Restart the computer when prompted, but click "No" if you are prompted to allow Windows to enable a protocol.
Install TCP/IP on a Windows 2000-based Computer 1. Log on to Windows as Administrator. 2. In Control Panel, double-click "Network Connections", right-click "Local Area Connection", and then click "Properties". 3. Click "Install". 4. In the "Select Network Component Type" dialog box, click "Protocol", and then click "Add". 5. Under "Network Protocol", click" Internet Protocol (TCP/IP)", and then click "OK". 6. When the protocol is installed, click "Close". 7. Restart the computer.
Reinstall TCP/IP on a Windows XP Computer
In Windows XP, the TCP/IP stack is a core component of the operating system; therefore, you cannot remove TCP/IP in Windows XP.
1. Install TCP/IP on top of itself:
a. In Control Panel, double-click "Network Connections", right-click "Local Area Connection", and then click "Properties".
b. Click "Install".
c. Click "Protocol", and then click "Add".
d. Click "Have Disk".
e. Type the path of the Nettcpip.inf file, and then click "OK". Typically, the Nettcpip.inf file is in the C:WindowsInf folder.
f. In the list of available protocols, click "Internet Protocol (TCP/IP)", and then click "OK".
2. Restart the computer. When the computer restarts, the Winsock and the Winsock2 subkeys will be functional.
Method 2 --------
If you are correcting this problem on several computers and you have access to a working computer with the same operating system version and a similar hardware configuration, Microsoft recommends Method 2.
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk. To resolve this issue, delete the corrupted registry entries, and then replace them with the registry key information exported from a computer that has a working installation of TCP/IP. To do this, follow these steps.
Delete the Corrupted Registry Entries 1. Click "Start", click "Run", type "regedit" (without the quotation marks), and then click "OK". 2. In Registry Editor, locate and click the following registry subkey:"HKEY_LOCAL_MACHINESystemCurrentControlSetServices". 3. Right-click "Winsock", and then click "Delete". When you are prompted to confirm the deletion, click "Yes". 4. Right-click "Winsock2", and then click "Delete". When you are prompted to confirm the deletion, click "Yes".
Export the Registry Entries to a Floppy Disk
Note The computer that you are importing the registry entries from must use the same version of Windows and be either similar to or a duplicate of the computer that is experiencing the issues described in the "Symptoms" section.
1. Insert a floppy disk in the floppy disk drive of the computer whose registry entries you are exporting. 2. Click "Start", and then click "Run". 3. In the "Open "box, type "regedit", and then click "OK". 4. In Registry Editor, locate and click the following registry subkey: "HKEY_LOCAL_MACHINESystemCurrentControlSetServices", and then click "Winsock". 5. Click "File," and then click" Export". 6. In the "Save in" box, click "3? Floppy(A:)", type a name for the file in the "File name" box, and then click "Save". 7. Click "Winsock2", click "File", and then click" Export". 8. In the "Save in" box, click "3? Floppy(A:)", type a name for the file in the "File name" box, and then click "Save". Note Each ".reg" file that you save must have a different name. 9. Quit Registry Editor.
Import the Registry Entries from the Floppy Disk
1. Insert the floppy disk that contains the .reg files in the floppy disk drive of the computer that is experiencing the issue that is mentioned in the "Symptoms" section. 2. Start Windows Explorer, click "My Computer", and then double-click "3? Floppy(A:)". 3. Double-click each .reg file that you created and saved to the floppy disk in the "Export the Registry Keys to a Floppy Disk" section. 4. Click "Yes" when you are prompted to add information to the registry. 5. Click "OK" when you receive the message that the information is successfully entered in the registry. 6. Quit Registry Editor.
"Willow" a écrit dans le message de news: 8f4901c432ec$1b32c800$ Bonjour,
De manière régulière depuis quelques jours, alors que je suis en train de surfer, je perds ma connection Noos. Si j'éteins le modem puis le rallume, cela ne marche toujours pas. Il faut que je redémarre le PC pour que cela remarche. Avec l'utilitaire grenouille.exe, si j'essaie de tester la connexion, il me met erreur Winsock.
Par ailleurs, j'ai essayé Exécuter > sfc /scannow avec mon CD XP Familiale (version de mise à jour vers XP) dans le lecteur et il me demande la SP1 Professionnel. Pourquoi ?
Quelqu'un va-t-il pouvoir m'aider ?
Willow
willow,
la methode suivante permet de reinstaller winsock, je ne te cache pas
qu'elle est un peu lourde mais bon, si tu ne veux pas tout reinstaller :
Export and Delete the Corrupted Registry Subkeys
1. Insert a floppy disk in the floppy disk drive of the computer whose
registry entries you are exporting.
2. Click "Start", and then click "Run".
3. In the "Open" box, type "regedit" (without the quotation marks), and
then click "OK".
4. Locate and click the following registry subkey:
"HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesWinsock"
5. On the "File" menu, click "Export". In the "Save in" box, click "3?
Floppy (A:)", type a name for the file in the "File name" box, and then
click "Save".
6. Right-click "Winsock", and then click "Delete". When you are
prompted to confirm the deletion, click "Yes".
7. Repeat steps 3 through 5 for the following subkey:
"HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesWinsock2"Note Each
".reg" file that you save must have a different name.
8. Right-click "Winsock2", click "Delete", and then click "Yes".
9. Restart the computer. Note Restart the computer after you delete the
"Winsock" and "Winsock2" registry subkeys.
Remove TCP/IP on a Windows 2000-based Computer
1. Log on to Windows as Administrator.
2. In Control Panel, double-click "Network Connections", right-click
"Local Area Connection", and then click "Properties".
3. Under "This component uses the following items", click "Internet
Protocol (TCP/IP)", and then click "Uninstall".
4. Follow the instructions on the screen to remove TCP/IP.
5. Restart the computer when prompted, but click "No" if you are
prompted to allow Windows to enable a protocol.
Install TCP/IP on a Windows 2000-based Computer
1. Log on to Windows as Administrator.
2. In Control Panel, double-click "Network Connections", right-click
"Local Area Connection", and then click "Properties".
3. Click "Install".
4. In the "Select Network Component Type" dialog box, click "Protocol",
and then click "Add".
5. Under "Network Protocol", click" Internet Protocol (TCP/IP)", and
then click "OK".
6. When the protocol is installed, click "Close".
7. Restart the computer.
Reinstall TCP/IP on a Windows XP Computer
In Windows XP, the TCP/IP stack is a core component of the operating system;
therefore, you cannot remove TCP/IP in Windows XP.
1. Install TCP/IP on top of itself:
a. In Control Panel, double-click "Network Connections", right-click "Local
Area
Connection", and then click "Properties".
b. Click "Install".
c. Click "Protocol", and then click "Add".
d. Click "Have Disk".
e. Type the path of the Nettcpip.inf file, and then click "OK". Typically,
the Nettcpip.inf file is in the C:WindowsInf folder.
f. In the list of available protocols, click "Internet Protocol (TCP/IP)",
and then click "OK".
2. Restart the computer. When the computer restarts, the Winsock and
the Winsock2 subkeys will be functional.
Method 2
--------
If you are correcting this problem on several computers and you have access
to a working computer with the same operating system version and a similar
hardware configuration, Microsoft recommends Method 2.
WARNING: If you use Registry Editor incorrectly, you may cause serious
problems that may require you to reinstall your operating system. Microsoft
cannot guarantee that you can solve problems that result from using Registry
Editor incorrectly. Use Registry Editor at your own risk.
To resolve this issue, delete the corrupted registry entries, and then
replace them with the registry key information exported from a computer that
has a working installation of TCP/IP. To do this, follow these steps.
Delete the Corrupted Registry Entries
1. Click "Start", click "Run", type "regedit" (without the quotation
marks), and then click "OK".
2. In Registry Editor, locate and click the following registry
subkey:"HKEY_LOCAL_MACHINESystemCurrentControlSetServices".
3. Right-click "Winsock", and then click "Delete". When you are
prompted to confirm the deletion, click "Yes".
4. Right-click "Winsock2", and then click "Delete". When you are
prompted to confirm the deletion, click "Yes".
Export the Registry Entries to a Floppy Disk
Note The computer that you are importing the registry entries from must use
the same version of Windows and be either similar to or a duplicate of the
computer that is experiencing the issues described in the "Symptoms"
section.
1. Insert a floppy disk in the floppy disk drive of the computer whose
registry entries you are exporting.
2. Click "Start", and then click "Run".
3. In the "Open "box, type "regedit", and then click "OK".
4. In Registry Editor, locate and click the following registry subkey:
"HKEY_LOCAL_MACHINESystemCurrentControlSetServices", and then click
"Winsock".
5. Click "File," and then click" Export".
6. In the "Save in" box, click "3? Floppy(A:)", type a name for the
file in the "File name" box, and then click "Save".
7. Click "Winsock2", click "File", and then click" Export".
8. In the "Save in" box, click "3? Floppy(A:)", type a name for the
file in the "File name" box, and then click "Save". Note Each ".reg"
file that you save must have a different name.
9. Quit Registry Editor.
Import the Registry Entries from the Floppy Disk
1. Insert the floppy disk that contains the .reg files in the floppy
disk drive of the computer that is experiencing the issue that is
mentioned in the "Symptoms" section.
2. Start Windows Explorer, click "My Computer", and then double-click
"3? Floppy(A:)".
3. Double-click each .reg file that you created and saved to the floppy
disk in the "Export the Registry Keys to a Floppy Disk" section.
4. Click "Yes" when you are prompted to add information to the registry.
5. Click "OK" when you receive the message that the information is
successfully entered in the registry.
6. Quit Registry Editor.
"Willow" <anonymous@discussions.microsoft.com> a écrit dans le message de
news: 8f4901c432ec$1b32c800$a101280a@phx.gbl...
Bonjour,
De manière régulière depuis quelques jours, alors que je
suis en train de surfer, je perds ma connection Noos. Si
j'éteins le modem puis le rallume, cela ne marche
toujours pas. Il faut que je redémarre le PC pour que
cela remarche.
Avec l'utilitaire grenouille.exe, si j'essaie de tester
la connexion, il me met erreur Winsock.
Par ailleurs, j'ai essayé Exécuter > sfc /scannow avec
mon CD XP Familiale (version de mise à jour vers XP) dans
le lecteur et il me demande la SP1 Professionnel.
Pourquoi ?
la methode suivante permet de reinstaller winsock, je ne te cache pas qu'elle est un peu lourde mais bon, si tu ne veux pas tout reinstaller :
Export and Delete the Corrupted Registry Subkeys 1. Insert a floppy disk in the floppy disk drive of the computer whose registry entries you are exporting. 2. Click "Start", and then click "Run". 3. In the "Open" box, type "regedit" (without the quotation marks), and then click "OK". 4. Locate and click the following registry subkey:
"HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesWinsock" 5. On the "File" menu, click "Export". In the "Save in" box, click "3? Floppy (A:)", type a name for the file in the "File name" box, and then click "Save". 6. Right-click "Winsock", and then click "Delete". When you are prompted to confirm the deletion, click "Yes". 7. Repeat steps 3 through 5 for the following subkey:
"HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesWinsock2"Note Each ".reg" file that you save must have a different name. 8. Right-click "Winsock2", click "Delete", and then click "Yes". 9. Restart the computer. Note Restart the computer after you delete the "Winsock" and "Winsock2" registry subkeys.
Remove TCP/IP on a Windows 2000-based Computer 1. Log on to Windows as Administrator. 2. In Control Panel, double-click "Network Connections", right-click "Local Area Connection", and then click "Properties". 3. Under "This component uses the following items", click "Internet Protocol (TCP/IP)", and then click "Uninstall". 4. Follow the instructions on the screen to remove TCP/IP. 5. Restart the computer when prompted, but click "No" if you are prompted to allow Windows to enable a protocol.
Install TCP/IP on a Windows 2000-based Computer 1. Log on to Windows as Administrator. 2. In Control Panel, double-click "Network Connections", right-click "Local Area Connection", and then click "Properties". 3. Click "Install". 4. In the "Select Network Component Type" dialog box, click "Protocol", and then click "Add". 5. Under "Network Protocol", click" Internet Protocol (TCP/IP)", and then click "OK". 6. When the protocol is installed, click "Close". 7. Restart the computer.
Reinstall TCP/IP on a Windows XP Computer
In Windows XP, the TCP/IP stack is a core component of the operating system; therefore, you cannot remove TCP/IP in Windows XP.
1. Install TCP/IP on top of itself:
a. In Control Panel, double-click "Network Connections", right-click "Local Area Connection", and then click "Properties".
b. Click "Install".
c. Click "Protocol", and then click "Add".
d. Click "Have Disk".
e. Type the path of the Nettcpip.inf file, and then click "OK". Typically, the Nettcpip.inf file is in the C:WindowsInf folder.
f. In the list of available protocols, click "Internet Protocol (TCP/IP)", and then click "OK".
2. Restart the computer. When the computer restarts, the Winsock and the Winsock2 subkeys will be functional.
Method 2 --------
If you are correcting this problem on several computers and you have access to a working computer with the same operating system version and a similar hardware configuration, Microsoft recommends Method 2.
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk. To resolve this issue, delete the corrupted registry entries, and then replace them with the registry key information exported from a computer that has a working installation of TCP/IP. To do this, follow these steps.
Delete the Corrupted Registry Entries 1. Click "Start", click "Run", type "regedit" (without the quotation marks), and then click "OK". 2. In Registry Editor, locate and click the following registry subkey:"HKEY_LOCAL_MACHINESystemCurrentControlSetServices". 3. Right-click "Winsock", and then click "Delete". When you are prompted to confirm the deletion, click "Yes". 4. Right-click "Winsock2", and then click "Delete". When you are prompted to confirm the deletion, click "Yes".
Export the Registry Entries to a Floppy Disk
Note The computer that you are importing the registry entries from must use the same version of Windows and be either similar to or a duplicate of the computer that is experiencing the issues described in the "Symptoms" section.
1. Insert a floppy disk in the floppy disk drive of the computer whose registry entries you are exporting. 2. Click "Start", and then click "Run". 3. In the "Open "box, type "regedit", and then click "OK". 4. In Registry Editor, locate and click the following registry subkey: "HKEY_LOCAL_MACHINESystemCurrentControlSetServices", and then click "Winsock". 5. Click "File," and then click" Export". 6. In the "Save in" box, click "3? Floppy(A:)", type a name for the file in the "File name" box, and then click "Save". 7. Click "Winsock2", click "File", and then click" Export". 8. In the "Save in" box, click "3? Floppy(A:)", type a name for the file in the "File name" box, and then click "Save". Note Each ".reg" file that you save must have a different name. 9. Quit Registry Editor.
Import the Registry Entries from the Floppy Disk
1. Insert the floppy disk that contains the .reg files in the floppy disk drive of the computer that is experiencing the issue that is mentioned in the "Symptoms" section. 2. Start Windows Explorer, click "My Computer", and then double-click "3? Floppy(A:)". 3. Double-click each .reg file that you created and saved to the floppy disk in the "Export the Registry Keys to a Floppy Disk" section. 4. Click "Yes" when you are prompted to add information to the registry. 5. Click "OK" when you receive the message that the information is successfully entered in the registry. 6. Quit Registry Editor.
"Willow" a écrit dans le message de news: 8f4901c432ec$1b32c800$ Bonjour,
De manière régulière depuis quelques jours, alors que je suis en train de surfer, je perds ma connection Noos. Si j'éteins le modem puis le rallume, cela ne marche toujours pas. Il faut que je redémarre le PC pour que cela remarche. Avec l'utilitaire grenouille.exe, si j'essaie de tester la connexion, il me met erreur Winsock.
Par ailleurs, j'ai essayé Exécuter > sfc /scannow avec mon CD XP Familiale (version de mise à jour vers XP) dans le lecteur et il me demande la SP1 Professionnel. Pourquoi ?
