Logo GNT
Actualités Tests & Guides Bons Plans
GTA 6 iPhone 17 Copilot Switch 2 Temu ChatGPT Tesla
OVH Cloud OVH Cloud
Entraide Linux Autres OS Linux Debian Perte de mes modules

Perte de mes modules

1 réponse
Avatar
Damelo
Bonjour !

Voici mon problème:
J'ai un système sarge qui ne redémarre presque jamais. Mais au
redémarrage, il y a plusieur modules qui ne se charge pas où entre en
erreur. je suis obligé de réinstaller le son a chaque fois et celà
devrai être pareil pour fglrx. un peu avant, je perdai mon "s" au
clavier 1 x sur 2. Ce qui est dur à comprendre, c'est que le système ne
subit aucune administration.
Dernier redémarrage tout à l'heure et là, impossible d'imprimer la
moindre page. Le document est transmi à l'imprimante mais rien ne se passe.

J'ai beau scruter les fichiers de config avec mes différentes doc et le
net mais je sèche.

Problème déjà rencontré par une personne de la liste?
Merci d'avance pour votre aide.


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Signaler un problème avec ce contenu

1 réponse

Supprimer
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire

Veuillez sélectionner un problème

Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
Avatar
Damelo
mx a écrit :

Le mercredi 03 janvier 2007 à 02:07 +0100, Damelo a écrit :


Bonjour !




Bonjour



Voici mon problème:
[...]
J'ai beau scruter les fichiers de config avec mes différentes doc et le
net mais je sèche.




Que dit dmesg | less ?
Jette un oeil au journaux systèmes dans /var/log



Problème déjà rencontré par une personne de la liste?
Merci d'avance pour votre aide.





N'as tu pas saturé une partition /var ou / ?

mX








Merci, cependant, dmesg | less ne m'a rien appri sur mon problème. Voici
la réponse:

:~$ dmesg
ata2.00: ata2: dev 0 multi count 16
[ 34.094121] ata2.00: configured for UDMA/100
[ 34.094238] Vendor: ATA Model: HDS722580VLSA80 Rev: V32O
[ 34.095222] Type: Direct-Access ANSI SCSI
revision: 05
[ 34.095448] Vendor: ATA Model: WDC WD3200JD-00K Rev: 08.0
[ 34.096433] Type: Direct-Access ANSI SCSI
revision: 05
[ 34.096636] sata_promise 0000:03:04.0: version 1.04
[ 34.108178] ata3: SATA max UDMA/133 cmd 0xF8CBA200 ctl 0xF8CBA238
bmdma 0x0 irq 23
[ 34.108249] ata4: SATA max UDMA/133 cmd 0xF8CBA280 ctl 0xF8CBA2B8
bmdma 0x0 irq 23
[ 34.108304] scsi2 : sata_promise
[ 34.309793] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.465847] ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48
NCQ (depth 0/32)
[ 34.469839] ata3.00: configured for UDMA/133
[ 34.469881] scsi3 : sata_promise
[ 34.671132] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.827186] ata4.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48
NCQ (depth 0/32)
[ 34.831178] ata4.00: configured for UDMA/133
[ 34.831272] Vendor: ATA Model: ST3320620AS Rev: 3.AA
[ 34.832256] Type: Direct-Access ANSI SCSI
revision: 05
[ 34.832476] Vendor: ATA Model: ST3320620AS Rev: 3.AA
[ 34.833460] Type: Direct-Access ANSI SCSI
revision: 05
[ 34.833723] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
[ 34.833775] sda: Write Protect is off
[ 34.833815] sda: Mode Sense: 00 3a 00 00
[ 34.833837] SCSI device sda: drive cache: write back
[ 34.833918] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
[ 34.833972] sda: Write Protect is off
[ 34.834012] sda: Mode Sense: 00 3a 00 00
[ 34.834030] SCSI device sda: drive cache: write back
[ 34.834071] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 34.914406] sd 0:0:0:0: Attached scsi disk sda
[ 34.914502] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.914553] sdb: Write Protect is off
[ 34.914593] sdb: Mode Sense: 00 3a 00 00
[ 34.914611] SCSI device sdb: drive cache: write back
[ 34.914685] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.914736] sdb: Write Protect is off
[ 34.914776] sdb: Mode Sense: 00 3a 00 00
[ 34.914798] SCSI device sdb: drive cache: write back
[ 34.914840] sdb: sdb1 sdb2 < sdb5 sdb6 > sdb3
[ 34.950404] sd 1:0:0:0: Attached scsi disk sdb
[ 34.950494] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.950546] sdc: Write Protect is off
[ 34.950586] sdc: Mode Sense: 00 3a 00 00
[ 34.950603] SCSI device sdc: drive cache: write back
[ 34.950679] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.950734] sdc: Write Protect is off
[ 34.950774] sdc: Mode Sense: 00 3a 00 00
[ 34.950791] SCSI device sdc: drive cache: write back
[ 34.951441] sdc: sdc1 sdc2 sdc3 sdc4
[ 34.960780] sd 2:0:0:0: Attached scsi disk sdc
[ 34.960873] SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.960924] sdd: Write Protect is off
[ 34.960964] sdd: Mode Sense: 00 3a 00 00
[ 34.960982] SCSI device sdd: drive cache: write back
[ 34.961052] SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB)
[ 34.961104] sdd: Write Protect is off
[ 34.961144] sdd: Mode Sense: 00 3a 00 00
[ 34.961161] SCSI device sdd: drive cache: write back
[ 34.961202] sdd: sdd1 sdd2 sdd3
[ 34.966215] sd 3:0:0:0: Attached scsi disk sdd
[ 34.968124] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 34.968344] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 34.968486] mice: PS/2 mouse device common for all mice
[ 34.968564] Advanced Linux Sound Architecture Driver Version
1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
[ 34.968616] ALSA device list:
[ 34.968655] No soundcards found.
[ 34.968710] TCP bic registered
[ 34.968753] NET: Registered protocol family 1
[ 34.968796] NET: Registered protocol family 17
[ 34.968841] Using IPI Shortcut mode
[ 34.969685] Time: tsc clocksource has been installed.
[ 34.973397] kjournald starting. Commit interval 5 seconds
[ 34.973445] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.973516] VFS: Mounted root (ext3 filesystem) readonly.
[ 34.973641] Freeing unused kernel memory: 180k freed
[ 35.019952] input: AT Translated Set 2 keyboard as /class/input/input0
[ 35.189042] logips2pp: Detected unknown logitech mouse model 26
[ 35.638161] Adding 2104472k swap on /dev/sda8. Priority:-1 extents:1
across:2104472k
[ 35.673657] input: ImExPS/2 Logitech Explorer Mouse as
/class/input/input1
[ 35.701724] EXT3 FS on sdc1, internal journal
[ 35.966794] hda: ATAPI 94X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache,
UDMA(66)
[ 35.967095] Uniform CD-ROM driver Revision: 3.20
[ 35.968853] hdb: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
[ 38.759239] ReiserFS: sdd1: found reiserfs format "3.6" with standard
journal
[ 40.129406] ReiserFS: sdd1: warning: CONFIG_REISERFS_CHECK is set ON
[ 40.129455] ReiserFS: sdd1: warning: - it is slow mode for debugging.
[ 40.129498] ReiserFS: sdd1: using ordered data mode
[ 40.144022] ReiserFS: sdd1: journal params: device sdd1, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 40.144445] ReiserFS: sdd1: checking transaction log (sdd1)
[ 40.144489] ReiserFS: sdd1: journal-1153: found in header:
first_unflushed_offset 7082, last_flushed_trans_id 74411
[ 40.152464] ReiserFS: sdd1: journal-1206: Starting replay from offset
319597106437034, trans_id 0
[ 40.152468] ReiserFS: sdd1: journal-1299: Setting newest_mount_id to 18
[ 40.173015] ReiserFS: sdd1: Using r5 hash to sort names
[ 40.226100] kjournald starting. Commit interval 5 seconds
[ 40.226363] EXT3 FS on sdd3, internal journal
[ 40.226435] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.246849] kjournald starting. Commit interval 5 seconds
[ 40.247111] EXT3 FS on sdc4, internal journal
[ 40.247184] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.285424] kjournald starting. Commit interval 5 seconds
[ 40.285595] EXT3 FS on sdd2, internal journal
[ 40.285667] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.313277] kjournald starting. Commit interval 5 seconds
[ 40.313653] EXT3 FS on sdb1, internal journal
[ 40.313725] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.466769] XFS mounting filesystem sda10
[ 40.574676] Ending clean XFS mount for filesystem: sda10
[ 40.587649] kjournald starting. Commit interval 5 seconds
[ 40.587781] EXT3 FS on sdc3, internal journal
[ 40.587854] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.627010] kjournald starting. Commit interval 5 seconds
[ 40.627165] EXT3 FS on sdc2, internal journal
[ 40.627240] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.655529] ReiserFS: sda3: found reiserfs format "3.6" with standard
journal
[ 41.289185] ReiserFS: sda3: warning: CONFIG_REISERFS_CHECK is set ON
[ 41.289229] ReiserFS: sda3: warning: - it is slow mode for debugging.
[ 41.289272] ReiserFS: sda3: using ordered data mode
[ 41.298830] ReiserFS: sda3: journal params: device sda3, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 41.299261] ReiserFS: sda3: checking transaction log (sda3)
[ 41.299311] ReiserFS: sda3: journal-1153: found in header:
first_unflushed_offset 4757, last_flushed_trans_id 553
[ 41.305948] ReiserFS: sda3: journal-1206: Starting replay from offset
2379411886741, trans_id 0
[ 41.305952] ReiserFS: sda3: journal-1299: Setting newest_mount_id to 18
[ 41.326553] ReiserFS: sda3: Using r5 hash to sort names
[ 41.365884] kjournald starting. Commit interval 5 seconds
[ 41.366172] EXT3 FS on sda9, internal journal
[ 41.366248] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.384565] ReiserFS: sda5: found reiserfs format "3.6" with standard
journal
[ 41.470860] ReiserFS: sda5: warning: CONFIG_REISERFS_CHECK is set ON
[ 41.470903] ReiserFS: sda5: warning: - it is slow mode for debugging.
[ 41.470945] ReiserFS: sda5: using ordered data mode
[ 41.487029] ReiserFS: sda5: journal params: device sda5, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
[ 41.487479] ReiserFS: sda5: checking transaction log (sda5)
[ 41.487523] ReiserFS: sda5: journal-1153: found in header:
first_unflushed_offset 2511, last_flushed_trans_id 86982
[ 41.490173] ReiserFS: sda5: journal-1206: Starting replay from offset
373589140310479, trans_id 0
[ 41.490177] ReiserFS: sda5: journal-1299: Setting newest_mount_id to 18
[ 41.496819] ReiserFS: sda5: Using r5 hash to sort names
[ 41.559064] loop: loaded (max 8 devices)
[ 41.605328] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 41.633596] ISO 9660 Extensions: RRIP_1991A
[ 41.647490] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 41.672427] ISO 9660 Extensions: RRIP_1991A
[ 42.500171] usbcore: registered new driver usbfs
[ 42.500249] usbcore: registered new driver hub
[ 42.501324] USB Universal Host Controller Interface driver v3.0
[ 42.501422] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 42.501426] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 42.501544] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 42.501612] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
[ 42.501770] usb usb1: configuration #1 chosen from 1 choice
[ 42.501850] hub 1-0:1.0: USB hub found
[ 42.501895] hub 1-0:1.0: 2 ports detected
[ 42.602731] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 42.602734] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 42.602810] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 42.602876] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
[ 42.603021] usb usb2: configuration #1 chosen from 1 choice
[ 42.603094] hub 2-0:1.0: USB hub found
[ 42.603139] hub 2-0:1.0: 2 ports detected
[ 42.704526] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 42.704530] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 42.704602] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 3
[ 42.704666] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
[ 42.704811] usb usb3: configuration #1 chosen from 1 choice
[ 42.704885] hub 3-0:1.0: USB hub found
[ 42.704929] hub 3-0:1.0: 2 ports detected
[ 42.806339] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 42.806343] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 42.806416] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 4
[ 42.806482] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
[ 42.806631] usb usb4: configuration #1 chosen from 1 choice
[ 42.806704] hub 4-0:1.0: USB hub found
[ 42.806748] hub 4-0:1.0: 2 ports detected
[ 42.808254] usb 1-1: new full speed USB device using uhci_hcd and
address 2
[ 42.947434] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 42.947440] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 42.947525] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 5
[ 42.947602] ehci_hcd 0000:00:1d.7: debug port 1
[ 42.947647] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 42.947654] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 42.951565] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 42.951705] usb usb5: configuration #1 chosen from 1 choice
[ 42.951781] hub 5-0:1.0: USB hub found
[ 42.951826] hub 5-0:1.0: 8 ports detected
[ 42.958855] usb 1-1: string descriptor 0 read error: -71
[ 42.966840] usb 1-1: string descriptor 0 read error: -71
[ 42.966953] usb 1-1: configuration #1 chosen from 1 choice
[ 42.970833] usb 1-1: can't set config #1, error -71
[ 43.074783] usb 1-1: USB disconnect, address 2
[ 43.591826] usb 5-1: new high speed USB device using ehci_hcd and
address 2
[ 43.664086] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full
Duplex
[ 43.722053] usb 5-1: configuration #1 chosen from 1 choice
[ 43.722229] hub 5-1:1.0: USB hub found
[ 43.722449] hub 5-1:1.0: 1 port detected
[ 44.454375] usb 5-1.1: new high speed USB device using ehci_hcd and
address 6
[ 44.544534] usb 5-1.1: configuration #1 chosen from 1 choice
[ 44.750703] usb 1-2: new low speed USB device using uhci_hcd and
address 3
[ 44.919401] usb 1-2: configuration #1 chosen from 1 choice
[ 45.128011] usb 2-2: new low speed USB device using uhci_hcd and
address 2
[ 45.297136] usb 2-2: configuration #1 chosen from 1 choice
[ 45.506320] usb 3-2: new full speed USB device using uhci_hcd and
address 2
[ 45.683403] usb 3-2: configuration #1 chosen from 1 choice
[ 49.885040] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 50.238666] ALSA sound/pci/ac97/ac97_codec.c:1990: AC'97 0 analog
subsections not ready
[ 50.301553] intel8x0_measure_ac97_clock: measured 51064 usecs
[ 50.301596] intel8x0: clocking to 48000
[ 51.715349] Initializing USB Mass Storage driver...
[ 51.715615] usb-storage: USB Mass Storage device detected
[ 51.715738] usb-storage: -- associate_dev
[ 51.715868] usb-storage: Vendor: 0x067b, Product: 0x2517, Revision:
0x0100
[ 51.715972] usb-storage: Interface Subclass: 0x05, Protocol: 0x50
[ 51.716075] usb-storage: Transport: Bulk
[ 51.716170] usb-storage: Protocol: 8070i
[ 51.716276] usb-storage: *** thread sleeping.
[ 51.716375] scsi4 : SCSI emulation for USB Mass Storage devices
[ 51.716566] usb-storage: device found at 6
[ 51.716568] usb-storage: waiting for device to settle before scanning
[ 51.716774] usbcore: registered new driver usb-storage
[ 51.716911] USB Mass Storage support registered.
[ 52.679990] NET: Registered protocol family 10
[ 52.680603] IPv6 over IPv4 tunneling driver
[ 56.706847] usb-storage: usb_stor_control_msg: rqþ rqtype¡
value00 index len=1
[ 56.707047] usb-storage: GetMaxLUN command result is 1, data is 0
[ 56.707087] usb-storage: queuecommand called
[ 56.707092] usb-storage: *** thread awakened.
[ 56.707095] usb-storage: Command INQUIRY (6 bytes)
[ 56.707096] usb-storage: 12 00 00 00 24 00
[ 56.707102] usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128
Trg 0 LUN 0 CL 12
[ 56.707105] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.707169] usb-storage: Status code 0; transferred 31/31
[ 56.707171] usb-storage: -- transfer complete
[ 56.707172] usb-storage: Bulk command transfer result=0
[ 56.707175] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36
bytes, 1 entries
[ 56.707916] usb-storage: Status code 0; transferred 36/36
[ 56.707918] usb-storage: -- transfer complete
[ 56.707920] usb-storage: Bulk data transfer result 0x0
[ 56.707922] usb-storage: Attempting to get CSW...
[ 56.707923] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.708039] usb-storage: Status code 0; transferred 13/13
[ 56.708041] usb-storage: -- transfer complete
[ 56.708043] usb-storage: Bulk status result = 0
[ 56.708045] usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
[ 56.708047] usb-storage: scsi cmd done, result=0x0
[ 56.708050] usb-storage: *** thread sleeping.
[ 56.708623] Vendor: Corsair Model: Flash Voyager Rev: 1.00
[ 56.709632] Type: Direct-Access ANSI SCSI
revision: 00
[ 56.709828] usb-storage: queuecommand called
[ 56.709836] usb-storage: *** thread awakened.
[ 56.709838] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 56.709839] usb-storage: 00 00 00 00 00 00
[ 56.709845] usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg
0 LUN 0 CL 12
[ 56.709847] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.709915] usb-storage: Status code 0; transferred 31/31
[ 56.709917] usb-storage: -- transfer complete
[ 56.709918] usb-storage: Bulk command transfer result=0
[ 56.709920] usb-storage: Attempting to get CSW...
[ 56.709922] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.710285] usb-storage: Status code 0; transferred 13/13
[ 56.710287] usb-storage: -- transfer complete
[ 56.710289] usb-storage: Bulk status result = 0
[ 56.710291] usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0
[ 56.710293] usb-storage: scsi cmd done, result=0x0
[ 56.710295] usb-storage: *** thread sleeping.
[ 56.710610] usb-storage: queuecommand called
[ 56.710614] usb-storage: *** thread awakened.
[ 56.710616] usb-storage: Command READ_CAPACITY (10 bytes)
[ 56.710618] usb-storage: 25 00 00 00 00 00 00 00 00 00
[ 56.710625] usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128
Trg 0 LUN 0 CL 12
[ 56.710627] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.710788] usb-storage: Status code 0; transferred 31/31
[ 56.710790] usb-storage: -- transfer complete
[ 56.710792] usb-storage: Bulk command transfer result=0
[ 56.710794] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes,
1 entries
[ 56.711034] usb-storage: Status code 0; transferred 8/8
[ 56.711037] usb-storage: -- transfer complete
[ 56.711038] usb-storage: Bulk data transfer result 0x0
[ 56.711040] usb-storage: Attempting to get CSW...
[ 56.711041] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.711159] usb-storage: Status code 0; transferred 13/13
[ 56.711161] usb-storage: -- transfer complete
[ 56.711162] usb-storage: Bulk status result = 0
[ 56.711164] usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
[ 56.711166] usb-storage: scsi cmd done, result=0x0
[ 56.711168] usb-storage: *** thread sleeping.
[ 56.711605] SCSI device sde: 2002944 512-byte hdwr sectors (1026 MB)
[ 56.711653] usb-storage: queuecommand called
[ 56.711657] usb-storage: *** thread awakened.
[ 56.711659] usb-storage: Command MODE_SENSE_10 (10 bytes)
[ 56.711661] usb-storage: 5a 00 3f 00 00 00 00 00 c0 00
[ 56.711668] usb-storage: Bulk Command S 0x43425355 T 0x4 L 192 F 128
Trg 0 LUN 0 CL 12
[ 56.711670] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.711785] usb-storage: Status code 0; transferred 31/31
[ 56.711788] usb-storage: -- transfer complete
[ 56.711789] usb-storage: Bulk command transfer result=0
[ 56.711791] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192
bytes, 1 entries
[ 56.714407] usb-storage: Status code -121; transferred 40/192
[ 56.714409] usb-storage: -- short read transfer
[ 56.714411] usb-storage: Bulk data transfer result 0x1
[ 56.714413] usb-storage: Attempting to get CSW...
[ 56.714414] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.714653] usb-storage: Status code 0; transferred 13/13
[ 56.714655] usb-storage: -- transfer complete
[ 56.714656] usb-storage: Bulk status result = 0
[ 56.714658] usb-storage: Bulk Status S 0x53425355 T 0x4 R 152 Stat 0x0
[ 56.714660] usb-storage: scsi cmd done, result=0x0
[ 56.714662] usb-storage: *** thread sleeping.
[ 56.714830] sde: Write Protect is off
[ 56.714872] sde: Mode Sense: 00 26 00 00
[ 56.714874] sde: assuming drive cache: write through
[ 56.714940] usb-storage: queuecommand called
[ 56.714945] usb-storage: *** thread awakened.
[ 56.714947] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 56.714948] usb-storage: 00 00 00 00 00 00
[ 56.714953] usb-storage: Bulk Command S 0x43425355 T 0x5 L 0 F 0 Trg
0 LUN 0 CL 12
[ 56.714955] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.715029] usb-storage: Status code 0; transferred 31/31
[ 56.715031] usb-storage: -- transfer complete
[ 56.715033] usb-storage: Bulk command transfer result=0
[ 56.715034] usb-storage: Attempting to get CSW...
[ 56.715036] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.715276] usb-storage: Status code 0; transferred 13/13
[ 56.715278] usb-storage: -- transfer complete
[ 56.715280] usb-storage: Bulk status result = 0
[ 56.715282] usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
[ 56.715284] usb-storage: scsi cmd done, result=0x0
[ 56.715286] usb-storage: *** thread sleeping.
[ 56.715599] usb-storage: queuecommand called
[ 56.715602] usb-storage: *** thread awakened.
[ 56.715604] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
[ 56.715606] usb-storage: 1e 00 00 00 01 00
[ 56.715611] usb-storage: Bulk Command S 0x43425355 T 0x6 L 0 F 0 Trg
0 LUN 0 CL 12
[ 56.715613] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.715778] usb-storage: Status code 0; transferred 31/31
[ 56.715780] usb-storage: -- transfer complete
[ 56.715781] usb-storage: Bulk command transfer result=0
[ 56.715783] usb-storage: Attempting to get CSW...
[ 56.715785] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.716024] usb-storage: Status code 0; transferred 13/13
[ 56.716026] usb-storage: -- transfer complete
[ 56.716028] usb-storage: Bulk status result = 0
[ 56.716030] usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x1
[ 56.716032] usb-storage: -- transport indicates command failure
[ 56.716034] usb-storage: Issuing auto-REQUEST_SENSE
[ 56.716036] usb-storage: Bulk Command S 0x43425355 T 0x7 L 18 F 128
Trg 0 LUN 0 CL 12
[ 56.716038] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.716152] usb-storage: Status code 0; transferred 31/31
[ 56.716154] usb-storage: -- transfer complete
[ 56.716155] usb-storage: Bulk command transfer result=0
[ 56.716157] usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
[ 56.716399] usb-storage: Status code 0; transferred 18/18
[ 56.716401] usb-storage: -- transfer complete
[ 56.716403] usb-storage: Bulk data transfer result 0x0
[ 56.716404] usb-storage: Attempting to get CSW...
[ 56.716406] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.716524] usb-storage: Status code 0; transferred 13/13
[ 56.716526] usb-storage: -- transfer complete
[ 56.716528] usb-storage: Bulk status result = 0
[ 56.716530] usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0
[ 56.716532] usb-storage: -- Result from auto-sense is 0
[ 56.716534] usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
[ 56.716536] usb-storage: (Unknown Key): (unknown ASC/ASCQ)
[ 56.716539] usb-storage: scsi cmd done, result=0x2
[ 56.716540] usb-storage: *** thread sleeping.
[ 56.716605] usb-storage: queuecommand called
[ 56.716609] usb-storage: *** thread awakened.
[ 56.716611] usb-storage: Command TEST_UNIT_READY (6 bytes)
[ 56.716613] usb-storage: 00 00 00 00 00 00
[ 56.716618] usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg
0 LUN 0 CL 12
[ 56.716620] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.716775] usb-storage: Status code 0; transferred 31/31
[ 56.716778] usb-storage: -- transfer complete
[ 56.716779] usb-storage: Bulk command transfer result=0
[ 56.716781] usb-storage: Attempting to get CSW...
[ 56.716782] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.717023] usb-storage: Status code 0; transferred 13/13
[ 56.717025] usb-storage: -- transfer complete
[ 56.717026] usb-storage: Bulk status result = 0
[ 56.717028] usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0
[ 56.717030] usb-storage: scsi cmd done, result=0x0
[ 56.717032] usb-storage: *** thread sleeping.
[ 56.717596] usb-storage: queuecommand called
[ 56.717600] usb-storage: *** thread awakened.
[ 56.717602] usb-storage: Command READ_CAPACITY (10 bytes)
[ 56.717604] usb-storage: 25 00 00 00 00 00 00 00 00 00
[ 56.717611] usb-storage: Bulk Command S 0x43425355 T 0x9 L 8 F 128
Trg 0 LUN 0 CL 12
[ 56.717613] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.717774] usb-storage: Status code 0; transferred 31/31
[ 56.717776] usb-storage: -- transfer complete
[ 56.717778] usb-storage: Bulk command transfer result=0
[ 56.717780] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes,
1 entries
[ 56.718021] usb-storage: Status code 0; transferred 8/8
[ 56.718023] usb-storage: -- transfer complete
[ 56.718025] usb-storage: Bulk data transfer result 0x0
[ 56.718026] usb-storage: Attempting to get CSW...
[ 56.718028] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.718146] usb-storage: Status code 0; transferred 13/13
[ 56.718148] usb-storage: -- transfer complete
[ 56.718149] usb-storage: Bulk status result = 0
[ 56.718151] usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0
[ 56.718153] usb-storage: scsi cmd done, result=0x0
[ 56.718155] usb-storage: *** thread sleeping.
[ 56.718592] SCSI device sde: 2002944 512-byte hdwr sectors (1026 MB)
[ 56.718640] usb-storage: queuecommand called
[ 56.718643] usb-storage: *** thread awakened.
[ 56.718645] usb-storage: Command MODE_SENSE_10 (10 bytes)
[ 56.718647] usb-storage: 5a 00 3f 00 00 00 00 00 c0 00
[ 56.718654] usb-storage: Bulk Command S 0x43425355 T 0xa L 192 F 128
Trg 0 LUN 0 CL 12
[ 56.718656] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.718773] usb-storage: Status code 0; transferred 31/31
[ 56.718775] usb-storage: -- transfer complete
[ 56.718776] usb-storage: Bulk command transfer result=0
[ 56.718779] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192
bytes, 1 entries
[ 56.721394] usb-storage: Status code -121; transferred 40/192
[ 56.721396] usb-storage: -- short read transfer
[ 56.721397] usb-storage: Bulk data transfer result 0x1
[ 56.721399] usb-storage: Attempting to get CSW...
[ 56.721401] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.721640] usb-storage: Status code 0; transferred 13/13
[ 56.721642] usb-storage: -- transfer complete
[ 56.721643] usb-storage: Bulk status result = 0
[ 56.721645] usb-storage: Bulk Status S 0x53425355 T 0xa R 152 Stat 0x0
[ 56.721647] usb-storage: scsi cmd done, result=0x0
[ 56.721649] usb-storage: *** thread sleeping.
[ 56.721820] sde: Write Protect is off
[ 56.721861] sde: Mode Sense: 00 26 00 00
[ 56.721863] sde: assuming drive cache: write through
[ 56.721904] sde:<7>usb-storage: queuecommand called
[ 56.721992] usb-storage: *** thread awakened.
[ 56.721995] usb-storage: Command READ_10 (10 bytes)
[ 56.721996] usb-storage: 28 00 00 00 00 00 00 00 08 00
[ 56.722003] usb-storage: Bulk Command S 0x43425355 T 0xb L 4096 F 128
Trg 0 LUN 0 CL 12
[ 56.722005] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 56.722141] usb-storage: Status code 0; transferred 31/31
[ 56.722143] usb-storage: -- transfer complete
[ 56.722145] usb-storage: Bulk command transfer result=0
[ 56.722147] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096
bytes, 1 entries
[ 56.764821] usb-storage: Status code 0; transferred 4096/4096
[ 56.764826] usb-storage: -- transfer complete
[ 56.764828] usb-storage: Bulk data transfer result 0x0
[ 56.764830] usb-storage: Attempting to get CSW...
[ 56.764832] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 56.765062] usb-storage: Status code 0; transferred 13/13
[ 56.765064] usb-storage: -- transfer complete
[ 56.765066] usb-storage: Bulk status result = 0
[ 56.765068] usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0
[ 56.765070] usb-storage: scsi cmd done, result=0x0
[ 56.765073] usb-storage: *** thread sleeping.
[ 56.765519] sde1
[ 56.765694] sd 4:0:0:0: Attached scsi removable disk sde
[ 56.765810] usb-storage: queuecommand called
[ 56.765815] usb-storage: *** thread awakened.
[ 56.765817] usb-storage: Bad target number (1:0)
[ 56.765819] usb-storage: scsi cmd done, result=0x40000
[ 56.765821] usb-storage: *** thread sleeping.
[ 56.766533] usb-storage: queuecommand called
[ 56.766537] usb-storage: *** thread awakened.
[ 56.766539] usb-storage: Bad target number (2:0)
[ 56.766541] usb-storage: scsi cmd done, result=0x40000
[ 56.766542] usb-storage: *** thread sleeping.
[ 56.766757] usb-storage: queuecommand called
[ 56.766761] usb-storage: *** thread awakened.
[ 56.766763] usb-storage: Bad target number (3:0)
[ 56.766765] usb-storage: scsi cmd done, result=0x40000
[ 56.766767] usb-storage: *** thread sleeping.
[ 56.767527] usb-storage: queuecommand called
[ 56.767531] usb-storage: *** thread awakened.
[ 56.767533] usb-storage: Bad target number (4:0)
[ 56.767534] usb-storage: scsi cmd done, result=0x40000
[ 56.767536] usb-storage: *** thread sleeping.
[ 56.767756] usb-storage: queuecommand called
[ 56.767760] usb-storage: *** thread awakened.
[ 56.767762] usb-storage: Bad target number (5:0)
[ 56.767764] usb-storage: scsi cmd done, result=0x40000
[ 56.767766] usb-storage: *** thread sleeping.
[ 56.768522] usb-storage: queuecommand called
[ 56.768526] usb-storage: *** thread awakened.
[ 56.768528] usb-storage: Bad target number (6:0)
[ 56.768530] usb-storage: scsi cmd done, result=0x40000
[ 56.768532] usb-storage: *** thread sleeping.
[ 56.768753] usb-storage: queuecommand called
[ 56.768757] usb-storage: *** thread awakened.
[ 56.768758] usb-storage: Bad target number (7:0)
[ 56.768760] usb-storage: scsi cmd done, result=0x40000
[ 56.768762] usb-storage: *** thread sleeping.
[ 56.769506] usb-storage: device scan complete
[ 62.943437] eth0: no IPv6 routers present
[ 186.888119] hdb: drive_cmd: status=0x41 { DriveReady Error }
[ 186.888127] hdb: drive_cmd: error=0x04 { AbortedCommand }
[ 186.888130] ide: failed opcode was: 0xe5
[ 186.888596] hdb: drive_cmd: status=0x41 { DriveReady Error }
[ 186.888602] hdb: drive_cmd: error=0x04 { AbortedCommand }
[ 186.888604] ide: failed opcode was: 0x98
[ 186.888943] hdb: drive_cmd: status=0x41 { DriveReady Error }
[ 186.888949] hdb: drive_cmd: error=0x04 { AbortedCommand }
[ 186.888951] ide: failed opcode was: 0xb0
[ 186.892861] hda: drive_cmd: status=0x41 { DriveReady Error }
[ 186.892867] hda: drive_cmd: error=0x04 { AbortedCommand }
[ 186.892870] ide: failed opcode was: 0xe5
[ 186.893221] hda: drive_cmd: status=0x41 { DriveReady Error }
[ 186.893227] hda: drive_cmd: error=0x04 { AbortedCommand }
[ 186.893230] ide: failed opcode was: 0x98
[ 186.893567] hda: drive_cmd: status=0x41 { DriveReady Error }
[ 186.893573] hda: drive_cmd: error=0x04 { AbortedCommand }
[ 186.893576] ide: failed opcode was: 0xb0
[ 1287.395809] drivers/usb/class/usblp.c: usblp0: USB Bidirectional
printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0808
[ 1287.395857] usbcore: registered new driver usblp
[ 1287.395876] drivers/usb/class/usblp.c: v0.13: USB Printer Device
Class driver
[ 4148.023074] i2c_adapter i2c-9191: ISA main adapter registered
[ 7603.909661] Linux agpgart interface v0.101 (c) Dave Jones
[46085.899001] usb 3-2: USB disconnect, address 2
[46085.899273] drivers/usb/class/usblp.c: usblp0: removed
[46110.966158] usb 3-2: new full speed USB device using uhci_hcd and
address 3
[46111.145224] usb 3-2: configuration #1 chosen from 1 choice
[46111.163115] drivers/usb/class/usblp.c: usblp0: USB Bidirectional
printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0808

Et mes partitions ont toutes suffisament d'espace disque.

Je suis obligé de recharger mes modules à la main (modprobe) et un
updates-modules ne change rien. je doit les recharger a chaque fois.

Merci.


--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Vous pouvez aussi ajouter le mot ``spam'' dans vos champs "From" et
"Reply-To:"

To UNSUBSCRIBE, email to
with a subject of "unsubscribe". Trouble? Contact