J'essaie depuis plusieurs jours de faire fonctionner une carte t=E9l=E9
Pinnacle PCTV pro sur une Mandrake 9.1.
Tout marche parfaitement sous Windows XP, mais sous Linux, je
n'arrive pas =E0 piloter le tuner.
J'ai essay=E9 avec ces options dans "/etc/modules.conf":
<<<<<
# i2c
alias char-major-89 i2c-dev
options i2c-core i2c_debug=3D1
options i2c-algo-bit bit_test=3D1
card=3D1 - MIRO PCTV
card=3D11 - MIRO PCTV pro
card=3D39 - Pinnacle PCTV Studio/Rave
card=3D52 - Pinnacle PCTV Studio Pro
type=3D0 - Temic PAL (4002 FH5)
type=3D3 - Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)
type=3D33 - MT2032 universal
(ainsi que pas mal d'autres...)
Quand je choisis une cha=EEne sous Windows, puis que je reboote la
machine sans l'arr=EAter, j'obtiens une image sous Linux avec plusieurs
de ces combinaisons carte/tuner. Mais impossible de trouver d'autres
cha=EEnes avec scantv ou xawtv.
Voil=E0 un extrait significatif de syslog:
<<<<<
00:40:07 kernel: bttv0: unloading
00:40:07 kernel: bttv0: i2c detach [client=3Dtda9887,ok]
00:40:07 kernel: bttv0: i2c detach [client=3DMSP3410G-B11,ok]
00:40:07 kernel: bttv0: i2c detach [client=3DPhilips (SECAM+PAL_BG) (FI1216=
MF,ok]
00:40:17 kernel: bttv: driver version 0.7.100 loaded
00:40:17 kernel: bttv: using 4 buffers with 2080k (8320k total) for capture
00:40:17 kernel: bttv: Host bridge is Advanced Micro Devices [AMD] AMD-760 =
MP [IGD4-2P] System Controller
00:40:17 kernel: bttv: Bt8xx card found (0).
00:40:17 kernel: bttv0: Bt878 (rev 17) at 00:09.0, irq: 17, latency: 32, mm=
io: 0xe7000000
00:40:17 kernel: bttv0: detected: Pinnacle PCTV [card=3D39], PCI subsystem =
ID is 11bd:0012
00:40:17 kernel: bttv0: using: BT878(MIRO PCTV pro) [card=3D11,insmod optio=
n]
00:40:17 kernel: tda9887: probing bt848 #0 i2c adapter [id=3D0x10005]
00:40:17 kernel: tda9887: chip found @ 0x86
00:40:17 kernel: bttv0: i2c attach [client=3Dtda9887,ok]
00:40:17 kernel: msp34xx: init: chip=3DMSP3410G-B11, has NICAM support
00:40:17 kernel: msp3410: daemon started
00:40:17 kernel: bttv0: i2c attach [client=3DMSP3410G-B11,ok]
00:40:17 kernel: tuner: probing bt848 #0 i2c adapter [id=3D0x10005]
00:40:17 kernel: tuner: chip found @ 0xc0
00:40:17 kernel: tuner(bttv): type forced to 3 (Philips (SECAM+PAL_BG) (FI1=
216MF, FM1216MF, FR1216MF)) [insmod]
00:40:17 kernel: bttv0: i2c attach [client=3DPhilips (SECAM+PAL_BG) (FI1216=
MF,ok]
00:40:17 kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found
00:40:17 kernel: bttv0: pinnacle/mt: id=3D2 info=3D"PAL+SECAM / stereo" rad=
io=3Dyes
00:40:17 kernel: tuner: type already set (3)
00:40:17 kernel: bttv0: using tuner=3D33
00:40:17 kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found
00:40:17 kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
00:40:17 kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
00:40:17 kernel: bttv0: PLL: 28636363 =3D> 35468950 ... ok
00:40:17 kernel: bttv0: registered device video0
00:40:17 kernel: bttv0: registered device vbi0
00:40:17 kernel: bttv0: registered device radio0
>>>>>
Auriez-vous des suggestions?
--=20
J=E9r=E9my JUST <jeremy_just@netcourrier.com>
