probleme d'installation du kernel 2.6.4

Le 27-04-2004, appofice écrivait:

J'ai voulu installer le noyau 2.6, mais j'ai eu beaucoup message d'erreur.
j'ai pu installer mon noyau mais je peu pas installer mon driver du modem.
smlink. Je crois que c'est a cause des binutils et modules-init-tools. qui
ne veullent pas c'installer. j'ai dowloader le binutils2.14 et
modules-init-tools 3.0
qui peut m'aider????

Il serait intéréssant de connaître quelques uns de ces messages
d'erreur, d'en savoir plus sur la distribution et eventuellement sur
votre matériel .

--
apt-get --purge remove Bush

Alain Labarthe wrote:

Il serait intéréssant de connaître quelques uns de ces messages
d'erreur, d'en savoir plus sur la distribution et eventuellement sur
votre matériel .

Et aussi le mode d'installation des nouveaux binutils , pour savoir si
il a desinstalle les anciens ou pas et quel path il a utilise pour ces
binutils .


--
Rakotomandimby Mihamina Andrianifaharana
Tel : +33 2 38 76 43 65
http://stko.dyndns.info/site_principal/Members/mihamina

"Rakotomandimby Mihamina" <rktmb.tontolo@wanadoo.fr> wrote in message
news:c6l3gv$oqs$1@news-reader3.wanadoo.fr...

Alain Labarthe wrote:

Il serait intéréssant de connaître quelques uns de ces messages
d'erreur, d'en savoir plus sur la distribution et eventuellement sur
votre matériel .

Et aussi le mode d'installation des nouveaux binutils , pour savoir si
il a desinstalle les anciens ou pas et quel path il a utilise pour ces
binutils .


--
Rakotomandimby Mihamina Andrianifaharana
Tel : +33 2 38 76 43 65
http://stko.dyndns.info/site_principal/Members/mihamina

Je vais encore installer que j'ai delete un fichier de kde car ca demarre
pas. Je vous envoyerai les messages qui sortent

--nextPart41681743.iNCsQaf8KY
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8Bit

appofice wrote:

"Rakotomandimby Mihamina" <rktmb.tontolo@wanadoo.fr> wrote in message
news:c6l3gv$oqs$1@news-reader3.wanadoo.fr...

Alain Labarthe wrote:

Il serait intéréssant de connaître quelques uns de ces messages
d'erreur, d'en savoir plus sur la distribution et eventuellement sur
votre matériel .

Et aussi le mode d'installation des nouveaux binutils , pour savoir si
il a desinstalle les anciens ou pas et quel path il a utilise pour ces
binutils .


--
Rakotomandimby Mihamina Andrianifaharana
Tel : +33 2 38 76 43 65
http://stko.dyndns.info/site_principal/Members/mihamina

Je vais encore installer que j'ai delete un fichier de kde car ca
demarre pas. Je vous envoyerai les messages qui sortent

Les messages qui apparaissent sont dans les fichier joins. Maintenant j'ai
kernel 2.4.19 mdk .

--nextPart41681743.iNCsQaf8KY
Content-Type: text/plain; name="msgbinutils"
Content-Transfer-Encoding: 8Bit
Content-Disposition: attachment; filename="msgbinutils"

binutils

[root@localhost binutils-2.14]# ./configure
loading cache ./config.cache
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking build system type... i686-pc-linux-gnu
checking for i686-pc-linux-gnu-ar... (cached) ar
checking for i686-pc-linux-gnu-as... no
checking for as... (cached) as
checking for i686-pc-linux-gnu-dlltool... no
checking for dlltool... (cached) dlltool
checking for i686-pc-linux-gnu-ld... no
checking for ld... (cached) ld
checking for i686-pc-linux-gnu-nm... no
checking for nm... (cached) nm
checking for i686-pc-linux-gnu-ranlib... (cached) ranlib
checking for i686-pc-linux-gnu-windres... no
checking for windres... (cached) windres
checking for i686-pc-linux-gnu-objcopy... no
checking for objcopy... (cached) objcopy
checking for i686-pc-linux-gnu-objdump... no
checking for objdump... (cached) objdump
checking for i686-pc-linux-gnu-ar... no
checking for ar... (cached) ar
checking for i686-pc-linux-gnu-as... no
checking for as... (cached) as
checking for i686-pc-linux-gnu-dlltool... no
checking for dlltool... (cached) dlltool
checking for i686-pc-linux-gnu-ld... no
checking for ld... (cached) ld
checking for i686-pc-linux-gnu-nm... no
checking for nm... (cached) nm
checking for i686-pc-linux-gnu-ranlib... no
checking for ranlib... (cached) ranlib
checking for i686-pc-linux-gnu-windres... no
checking for windres... (cached) windres
checking whether to enable maintainer-specific portions of Makefiles... no
creating ./config.status
creating Makefile
[root@localhost binutils-2.14]#


[root@localhost binutils-2.14]# make
Configuring in intl
loading cache .././config.cache
checking for a BSD compatible install... (cached) /usr//bin/install -c
checking how to run the C preprocessor... (cached) gcc -E
checking whether make sets ${MAKE}... (cached) yes
checking for gcc... (cached) gcc
checking whether the C compiler (gcc -g -O2 ) works... yes
checking whether the C compiler (gcc -g -O2 ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for ranlib... (cached) ranlib
checking for POSIXized ISC... no
checking for ANSI C header files... (cached) yes
checking for working const... (cached) yes
checking for inline... (cached) inline
checking for off_t... (cached) yes
checking for size_t... (cached) yes
checking for working alloca.h... (cached) yes
checking for alloca... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) yes
checking for argz.h... (cached) yes
checking for limits.h... (cached) yes
checking for locale.h... (cached) yes
checking for nl_types.h... (cached) yes
checking for malloc.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for values.h... (cached) yes
checking for sys/param.h... (cached) yes
checking for getcwd... (cached) yes
checking for munmap... (cached) yes
checking for putenv... (cached) yes
checking for setenv... (cached) yes
checking for setlocale... (cached) yes
checking for strchr... (cached) yes
checking for strcasecmp... (cached) yes
checking for __argz_count... (cached) yes
checking for __argz_stringify... (cached) yes
checking for __argz_next... (cached) yes
checking for LC_MESSAGES... (cached) yes
checking whether NLS is requested... yes
checking whether included gettext is requested... no
checking for libintl.h... (cached) yes
checking for gettext in libc... (cached) yes
checking for msgfmt... (cached) /usr//bin/msgfmt
checking for dcgettext... (cached) yes
checking for gmsgfmt... (cached) /usr//bin/msgfmt
checking for xgettext... (cached) /usr//bin/xgettext
creating ./config.status
creating Makefile
creating config.h
config.h is unchanged
make[1]: Entre dans le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/intl'
make[1]: Rien à faire pour `all'.
make[1]: Quitte le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/intl'
Configuring in libiberty
loading cache .././config.cache
checking whether to enable maintainer-specific portions of Makefiles... no
checking for makeinfo... (cached) makeinfo
checking for perl... (cached) perl
checking host system type... i686-pc-linux-gnu
checking build system type... i686-pc-linux-gnu
checking for ar... (cached) ar
checking for ranlib... (cached) ranlib
checking for gcc... (cached) gcc
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking whether gcc and cc understand -c and -o together... (cached) yes
checking for POSIXized ISC... no
checking for working const... (cached) yes
checking for inline... (cached) inline
checking for a BSD compatible install... (cached) /usr//bin/install -c
xhost-mkfrag is unchanged
checking how to run the C preprocessor... (cached) gcc -E
checking for sys/file.h... (cached) yes
checking for sys/param.h... (cached) yes
checking for limits.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for strings.h... (cached) yes
checking for sys/time.h... (cached) yes
checking for time.h... (cached) yes
checking for sys/resource.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for sys/mman.h... (cached) yes
checking for fcntl.h... (cached) yes
checking for alloca.h... (cached) yes
checking for sys/pstat.h... (cached) no
checking for sys/sysmp.h... (cached) no
checking for sys/sysinfo.h... (cached) yes
checking for machine/hal_sysinfo.h... (cached) no
checking for sys/table.h... (cached) no
checking for sys/sysctl.h... (cached) yes
checking for sys/systemcfg.h... (cached) no
checking for sys/wait.h that is POSIX.1 compatible... (cached) yes
checking whether time.h and sys/time.h may both be included... (cached) yes
checking whether errno must be declared... (cached) no
checking for ANSI C header files... (cached) yes
checking for uintptr_t... (cached) no
checking for pid_t... (cached) yes
checking whether the C compiler (gcc -g -O2 ) works... yes
checking whether the C compiler (gcc -g -O2 ) is a cross-compiler... no
checking for asprintf... (cached) yes
checking for atexit... (cached) yes
checking for basename... (cached) yes
checking for bcmp... (cached) yes
checking for bcopy... (cached) yes
checking for bsearch... (cached) yes
checking for bzero... (cached) yes
checking for calloc... (cached) yes
checking for clock... (cached) yes
checking for ffs... (cached) yes
checking for getcwd... (cached) yes
checking for getpagesize... (cached) yes
checking for index... (cached) yes
checking for insque... (cached) yes
checking for memchr... (cached) yes
checking for memcmp... (cached) yes
checking for memcpy... (cached) yes
checking for memmove... (cached) yes
checking for mempcpy... (cached) yes
checking for memset... (cached) yes
checking for mkstemps... (cached) no
checking for putenv... (cached) yes
checking for random... (cached) yes
checking for rename... (cached) yes
checking for rindex... (cached) yes
checking for setenv... (cached) yes
checking for snprintf... (cached) yes
checking for sigsetmask... (cached) yes
checking for stpcpy... (cached) yes
checking for stpncpy... (cached) yes
checking for strcasecmp... (cached) yes
checking for strchr... (cached) yes
checking for strdup... (cached) yes
checking for strncasecmp... (cached) yes
checking for strrchr... (cached) yes
checking for strstr... (cached) yes
checking for strtod... (cached) yes
checking for strtol... (cached) yes
checking for strtoul... (cached) yes
checking for tmpnam... (cached) yes
checking for vasprintf... (cached) yes
checking for vfprintf... (cached) yes
checking for vprintf... (cached) yes
checking for vsnprintf... (cached) yes
checking for vsprintf... (cached) yes
checking for waitpid... (cached) yes
checking whether alloca needs Cray hooks... (cached) no
checking stack direction for C alloca... (cached) -1
checking for vfork.h... (cached) no
checking for working vfork... (cached) yes
checking for _doprnt... (cached) no
checking for sys_errlist... (cached) yes
checking for sys_nerr... (cached) yes
checking for sys_siglist... (cached) yes
checking for _system_configuration... (cached) no
checking for getrusage... (cached) yes
checking for on_exit... (cached) yes
checking for psignal... (cached) yes
checking for strerror... (cached) yes
checking for strsignal... (cached) yes
checking for sysconf... (cached) yes
checking for times... (cached) yes
checking for sbrk... (cached) yes
checking for gettimeofday... (cached) yes
checking for realpath... (cached) yes
checking for canonicalize_file_name... (cached) yes
checking for pstat_getstatic... (cached) no
checking for pstat_getdynamic... (cached) no
checking for sysmp... (cached) no
checking for getsysinfo... (cached) no
checking for table... (cached) no
checking for sysctl... (cached) yes
checking whether canonicalize_file_name must be declared... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) yes
checking for working strncmp... (cached) yes
creating ./config.status
creating Makefile
creating testsuite/Makefile
creating config.h
config.h is unchanged
make[1]: Entre dans le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/libiberty'
rm -f needed-list; touch needed-list;
for f in atexit calloc memchr memcmp memcpy memmove memset rename strchr strerror strncmp strrchr strstr strtol strtoul tmpnam vfprintf vprintf vfork waitpid bcmp bcopy bzero; do
for g in mkstemps.o ; do
case "$g" in
*$f*) echo $g >> needed-list ;;
esac;
done;
done
echo regex.o cplus-dem.o cp-demangle.o md5.o alloca.o argv.o choose-temp.o concat.o dyn-string.o fdmatch.o fibheap.o floatformat.o fnmatch.o getopt.o getopt1.o getpwd.o getruntime.o hashtab.o hex.o lbasename.o lrealpath.o make-relative-prefix.o make-temp-file.o objalloc.o obstack.o partition.o physmem.o pex-unix.o safe-ctype.o sort.o spaces.o splay-tree.o strerror.o strsignal.o ternary.o xatexit.o xexit.o xmalloc.o xmemdup.o xstrdup.o xstrerror.o > required-list
make[2]: Entre dans le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/libiberty/testsuite'
make[2]: Rien à faire pour `all'.
make[2]: Quitte le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/libiberty/testsuite'
make[1]: Quitte le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/libiberty'
Configuring in opcodes
loading cache .././config.cache
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking build system type... i686-pc-linux-gnu
checking for gcc... (cached) gcc
checking whether the C compiler (gcc -g -O2 ) works... yes
checking whether the C compiler (gcc -g -O2 ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for POSIXized ISC... no
checking for a BSD compatible install... (cached) /usr//bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... found
checking for ar... (cached) ar
checking for ranlib... (cached) ranlib
checking for ld used by GCC... (cached) ld
checking if the linker (ld) is GNU ld... (cached) yes
checking for ld option to reload object files... (cached) -r
checking for BSD-compatible nm... (cached) nm
checking whether ln -s works... (cached) yes
checking how to recognise dependant libraries... (cached) pass_all
checking for object suffix... (cached) o
checking for executable suffix... (cached) no
checking for ranlib... (cached) ranlib
checking for strip... (cached) strip
loading cache .././config.cache within ltconfig
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... (cached) yes
checking if gcc static flag works... (cached) no
finding the maximum length of command line arguments... (cached) 49153
checking if gcc supports -c -o file.o... (cached) yes
checking if gcc supports -fno-rtti -fno-exceptions ... yes
checking whether the linker (ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking command to parse nm output... ok
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
creating libtool
loading cache .././config.cache
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether to install libbfd... yes
checking for executable suffix... (cached) no
checking for gcc... (cached) gcc
checking whether the C compiler (gcc -g -O2 ) works... yes
checking whether the C compiler (gcc -g -O2 ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking how to run the C preprocessor... (cached) gcc -E
checking for ranlib... (cached) ranlib
checking for ANSI C header files... (cached) yes
checking for working const... (cached) yes
checking for inline... (cached) inline
checking for off_t... (cached) yes
checking for size_t... (cached) yes
checking for working alloca.h... (cached) yes
checking for alloca... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) yes
checking for argz.h... (cached) yes
checking for limits.h... (cached) yes
checking for locale.h... (cached) yes
checking for nl_types.h... (cached) yes
checking for malloc.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for values.h... (cached) yes
checking for sys/param.h... (cached) yes
checking for getcwd... (cached) yes
checking for munmap... (cached) yes
checking for putenv... (cached) yes
checking for setenv... (cached) yes
checking for setlocale... (cached) yes
checking for strchr... (cached) yes
checking for strcasecmp... (cached) yes
checking for __argz_count... (cached) yes
checking for __argz_stringify... (cached) yes
checking for __argz_next... (cached) yes
checking for LC_MESSAGES... (cached) yes
checking whether NLS is requested... yes
checking whether included gettext is requested... no
checking for libintl.h... (cached) yes
checking for gettext in libc... (cached) yes
checking for msgfmt... (cached) /usr//bin/msgfmt
checking for dcgettext... (cached) yes
checking for gmsgfmt... (cached) /usr//bin/msgfmt
checking for xgettext... (cached) /usr//bin/xgettext
checking for catalogs to be installed... fr sv tr es da de id pt_BR ro
checking for a BSD compatible install... /usr//bin/install -c
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for stdlib.h... (cached) yes
creating ./config.status
creating Makefile
creating po/Makefile.in
creating config.h
config.h is unchanged
Configuring in bfd
loading cache .././config.cache
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking build system type... i686-pc-linux-gnu
checking for strerror in -lcposix... (cached) no
checking for a BSD compatible install... (cached) /usr//bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... found
checking for ar... (cached) ar
checking for ranlib... (cached) ranlib
checking for gcc... (cached) gcc
checking whether the C compiler (gcc -g -O2 ) works... yes
checking whether the C compiler (gcc -g -O2 ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for ld used by GCC... (cached) ld
checking if the linker (ld) is GNU ld... (cached) yes
checking for ld option to reload object files... (cached) -r
checking for BSD-compatible nm... (cached) nm
checking whether ln -s works... (cached) yes
checking how to recognise dependant libraries... (cached) pass_all
checking for object suffix... (cached) o
checking for executable suffix... (cached) no
checking for ranlib... (cached) ranlib
checking for strip... (cached) strip
loading cache .././config.cache within ltconfig
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... (cached) yes
checking if gcc static flag works... (cached) no
finding the maximum length of command line arguments... (cached) 49153
checking if gcc supports -c -o file.o... (cached) yes
checking if gcc supports -fno-rtti -fno-exceptions ... yes
checking whether the linker (ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking command to parse nm output... ok
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
creating libtool
loading cache .././config.cache
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether to install libbfd... yes
checking for executable suffix... (cached) no
checking for gcc... (cached) gcc
checking whether the C compiler (gcc -g -O2 ) works... yes
checking whether the C compiler (gcc -g -O2 ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking how to run the C preprocessor... (cached) gcc -E
checking for ranlib... (cached) ranlib
checking for ANSI C header files... (cached) yes
checking for working const... (cached) yes
checking for inline... (cached) inline
checking for off_t... (cached) yes
checking for size_t... (cached) yes
checking for working alloca.h... (cached) yes
checking for alloca... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) yes
checking for argz.h... (cached) yes
checking for limits.h... (cached) yes
checking for locale.h... (cached) yes
checking for nl_types.h... (cached) yes
checking for malloc.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for values.h... (cached) yes
checking for sys/param.h... (cached) yes
checking for getcwd... (cached) yes
checking for munmap... (cached) yes
checking for putenv... (cached) yes
checking for setenv... (cached) yes
checking for setlocale... (cached) yes
checking for strchr... (cached) yes
checking for strcasecmp... (cached) yes
checking for __argz_count... (cached) yes
checking for __argz_stringify... (cached) yes
checking for __argz_next... (cached) yes
checking for LC_MESSAGES... (cached) yes
checking whether NLS is requested... yes
checking whether included gettext is requested... no
checking for libintl.h... (cached) yes
checking for gettext in libc... (cached) yes
checking for msgfmt... (cached) /usr//bin/msgfmt
checking for dcgettext... (cached) yes
checking for gmsgfmt... (cached) /usr//bin/msgfmt
checking for xgettext... (cached) /usr//bin/xgettext
checking for catalogs to be installed... fr tr ja es sv da zh_CN
checking for a BSD compatible install... /usr//bin/install -c
checking for stddef.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for time.h... (cached) yes
checking for unistd.h... (cached) yes
checking for fcntl.h... (cached) yes
checking for sys/file.h... (cached) yes
checking for sys/time.h... (cached) yes
checking whether time.h and sys/time.h may both be included... (cached) yes
checking for dirent.h that defines DIR... (cached) yes
checking for opendir in -ldir... (cached) no
checking for fcntl... (cached) yes
checking for getpagesize... (cached) yes
checking for setitimer... (cached) yes
checking for sysconf... (cached) yes
checking for fdopen... (cached) yes
checking for getuid... (cached) yes
checking for getgid... (cached) yes
checking whether strstr must be declared... (cached) no
checking whether malloc must be declared... (cached) no
checking whether realloc must be declared... (cached) no
checking whether free must be declared... (cached) no
checking whether getenv must be declared... (cached) no
checking for sys/procfs.h... (cached) yes
checking for prstatus_t in sys/procfs.h... (cached) yes
checking for prstatus32_t in sys/procfs.h... (cached) no
checking for prstatus_t.pr_who in sys/procfs.h... (cached) no
checking for prstatus32_t.pr_who in sys/procfs.h... (cached) no
checking for pstatus_t in sys/procfs.h... (cached) no
checking for pxstatus_t in sys/procfs.h... (cached) no
checking for pstatus32_t in sys/procfs.h... (cached) no
checking for prpsinfo_t in sys/procfs.h... (cached) yes
checking for prpsinfo32_t in sys/procfs.h... (cached) no
checking for psinfo_t in sys/procfs.h... (cached) no
checking for psinfo32_t in sys/procfs.h... (cached) no
checking for lwpstatus_t in sys/procfs.h... (cached) no
checking for lwpxstatus_t in sys/procfs.h... (cached) no
checking for lwpstatus_t.pr_context in sys/procfs.h... (cached) no
checking for lwpstatus_t.pr_reg in sys/procfs.h... (cached) no
checking for win32_pstatus_t in sys/procfs.h... (cached) no
checking for unistd.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) yes
checking for madvise... (cached) yes
checking for mprotect... (cached) yes
creating ./config.status
creating Makefile
creating doc/Makefile
creating bfd-in3.h
creating bfdver.h
creating po/Makefile.in
creating config.h
config.h is unchanged
make[1]: Entre dans le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/bfd'
make all-recursive
make[2]: Entre dans le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/bfd'
Making all in doc
make[3]: Entre dans le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/bfd/doc'
make[3]: Rien à faire pour `all'.
make[3]: Quitte le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/bfd/doc'
Making all in po
make[3]: Entre dans le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/bfd/po'
make[3]: Rien à faire pour `all'.
make[3]: Quitte le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/bfd/po'
make[3]: Entre dans le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/bfd'
rm -f bfd-tmp.h
cp bfd-in3.h bfd-tmp.h
/bin/sh ./../move-if-change bfd-tmp.h bfd.h
bfd.h is unchanged
rm -f bfd-tmp.h
touch stmp-bfd-h
/bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -D_GNU_SOURCE -DTRAD_CORE -I. -I. -I./../include -I./../intl -I../intl -W -Wall -Wstrict-prototypes -Wmissing-prototypes -g -O2 -c -DDEFAULT_VECTOR¿d_elf32_i386_vec -DSELECT_VECS='&bfd_elf32_i386_vec,&i386linux_vec,&bfd_efi_app_ia32_vec,&bfd_elf32_little_generic_vec,&bfd_elf32_big_generic_vec' -DSELECT_ARCHITECTURES='&bfd_i386_arch' -DHAVE_bfd_elf32_i386_vec -DHAVE_i386linux_vec -DHAVE_bfd_efi_app_ia32_vec -DHAVE_bfd_elf32_little_generic_vec -DHAVE_bfd_elf32_big_generic_vec ./archures.c
gcc -DHAVE_CONFIG_H -I. -I. -I. -D_GNU_SOURCE -DTRAD_CORE -I. -I. -I./../include -I./../intl -I../intl -W -Wall -Wstrict-prototypes -Wmissing-prototypes -g -O2 -c -DDEFAULT_VECTOR¿d_elf32_i386_vec "-DSELECT_VECS=&bfd_elf32_i386_vec,&i386linux_vec,&bfd_efi_app_ia32_vec,&bfd_elf32_little_generic_vec,&bfd_elf32_big_generic_vec" "-DSELECT_ARCHITECTURES=&bfd_i386_arch" -DHAVE_bfd_elf32_i386_vec -DHAVE_i386linux_vec -DHAVE_bfd_efi_app_ia32_vec -DHAVE_bfd_elf32_little_generic_vec -DHAVE_bfd_elf32_big_generic_vec ./archures.c -o archures.o
/bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -D_GNU_SOURCE -DTRAD_CORE -I. -I. -I./../include -I./../intl -I../intl -W -Wall -Wstrict-prototypes -Wmissing-prototypes -g -O2 -c bfd.c
gcc -DHAVE_CONFIG_H -I. -I. -I. -D_GNU_SOURCE -DTRAD_CORE -I. -I. -I./../include -I./../intl -I../intl -W -Wall -Wstrict-prototypes -Wmissing-prototypes -g -O2 -c bfd.c -o bfd.o
/bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -D_GNU_SOURCE -DTRAD_CORE -I. -I. -I./../include -I./../intl -I../intl -W -Wall -Wstrict-prototypes -Wmissing-prototypes -g -O2 -c -DDEFAULT_VECTOR¿d_elf32_i386_vec -DSELECT_VECS='&bfd_elf32_i386_vec,&i386linux_vec,&bfd_efi_app_ia32_vec,&bfd_elf32_little_generic_vec,&bfd_elf32_big_generic_vec' -DSELECT_ARCHITECTURES='&bfd_i386_arch' -DHAVE_bfd_elf32_i386_vec -DHAVE_i386linux_vec -DHAVE_bfd_efi_app_ia32_vec -DHAVE_bfd_elf32_little_generic_vec -DHAVE_bfd_elf32_big_generic_vec ./targets.c
gcc -DHAVE_CONFIG_H -I. -I. -I. -D_GNU_SOURCE -DTRAD_CORE -I. -I. -I./../include -I./../intl -I../intl -W -Wall -Wstrict-prototypes -Wmissing-prototypes -g -O2 -c -DDEFAULT_VECTOR¿d_elf32_i386_vec "-DSELECT_VECS=&bfd_elf32_i386_vec,&i386linux_vec,&bfd_efi_app_ia32_vec,&bfd_elf32_little_generic_vec,&bfd_elf32_big_generic_vec" "-DSELECT_ARCHITECTURES=&bfd_i386_arch" -DHAVE_bfd_elf32_i386_vec -DHAVE_i386linux_vec -DHAVE_bfd_efi_app_ia32_vec -DHAVE_bfd_elf32_little_generic_vec -DHAVE_bfd_elf32_big_generic_vec ./targets.c -o targets.o
rm -f tofiles
f="";
for i in elf32-i386.lo elf32.lo elf.lo elflink.lo elf-strtab.lo elf-eh-frame.lo dwarf1.lo i386linux.lo aout32.lo efi-app-ia32.lo peigen.lo cofflink.lo elf32-gen.lo cpu-i386.lo trad-core.lo ; do
case " $f " in
*" $i "*) ;;
*) f="$f $i" ;;
esac ;
done ;
echo $f > tofiles
/bin/sh ./../move-if-change tofiles ofiles
ofiles is unchanged
touch stamp-ofiles
/bin/sh ./libtool --mode=link gcc -W -Wall -Wstrict-prototypes -Wmissing-prototypes -g -O2 -o libbfd.la -rpath /usr/local/lib -release 2.14 archive.lo archures.lo bfd.lo bfdio.lo bfdwin.lo cache.lo coffgen.lo corefile.lo format.lo init.lo libbfd.lo opncls.lo reloc.lo section.lo syms.lo targets.lo hash.lo linker.lo srec.lo binary.lo tekhex.lo ihex.lo stabs.lo stab-syms.lo merge.lo dwarf2.lo simple.lo archive64.lo `cat ofiles`
rm -fr .libs/libbfd.a .libs/libbfd.lai
ar cru .libs/libbfd.a archive.o archures.o bfd.o bfdio.o bfdwin.o cache.o coffgen.o corefile.o format.o init.o libbfd.o opncls.o reloc.o section.o syms.o targets.o hash.o linker.o srec.o binary.o tekhex.o ihex.o stabs.o stab-syms.o merge.o dwarf2.o simple.o archive64.o elf32-i386.o elf32.o elf.o elflink.o elf-strtab.o elf-eh-frame.o dwarf1.o i386linux.o aout32.o efi-app-ia32.o peigen.o cofflink.o elf32-gen.o cpu-i386.o trad-core.o
ranlib .libs/libbfd.a
creating libbfd.la
(cd .libs && rm -f libbfd.la && ln -s ../libbfd.la libbfd.la)
ln: création d'un lien symbolique `libbfd.la' vers `../libbfd.la': Operation not permitted
make[3]: *** [libbfd.la] Erreur 1
make[3]: Quitte le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/bfd'
make[2]: *** [all-recursive] Erreur 1
make[2]: Quitte le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/bfd'
make[1]: *** [all-recursive-am] Erreur 2
make[1]: Quitte le répertoire `/mnt/windows/linux/tools/blinux/binutils-2.14/bfd'
make: *** [all-bfd] Erreur 2
[root@localhost binutils-2.14]#
--nextPart41681743.iNCsQaf8KY
Content-Type: text/plain; name="msgmake"
Content-Transfer-Encoding: 8Bit
Content-Disposition: attachment; filename="msgmake"

make 3.80

[root@localhost make-3.80]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets ${MAKE}... yes
checking whether make sets ${MAKE}... (cached) yes
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD-compatible install... /usr/bin/install -c
checking for ranlib... ranlib
checking how to run the C preprocessor... gcc -E
checking for ar... ar
checking for perl... perl
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for egrep... grep -E
checking for AIX... no
checking for strerror in -lcposix... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking whether NLS is requested... yes
checking for GNU gettext in libc... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking for _LARGE_FILES value needed for large files... no
checking for library containing getpwnam... none required
checking for ANSI C header files... (cached) yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking whether stat file-mode macros are broken... no
checking whether time.h and sys/time.h may both be included... yes
checking for stdlib.h... (cached) yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for unistd.h... (cached) yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/timeb.h usability... yes
checking sys/timeb.h presence... yes
checking for sys/timeb.h... yes
checking whether gcc and cc understand -c and -o together... yes
checking for gcc option to accept ANSI C... none needed
checking for an ANSI C-conforming const... yes
checking return type of signal handlers... void
checking for uid_t in sys/types.h... yes
checking for pid_t... yes
checking for uintmax_t... yes
checking for nanoseconds field of struct stat.st_mtim... no
checking whether to use high resolution file timestamps... no
checking for standard gettimeofday... yes
checking for memcpy... yes
checking for memmove... yes
checking for strchr... yes
checking for strdup... yes
checking for mkstemp... yes
checking for mktemp... yes
checking for fdopen... yes
checking for bsd_signal... yes
checking for dup2... yes
checking for getcwd... yes
checking for sigsetmask... yes
checking for sigaction... yes
checking for getgroups... yes
checking for seteuid... yes
checking for setegid... yes
checking for setlinebuf... yes
checking for setreuid... yes
checking for setregid... yes
checking for setvbuf... yes
checking for pipe... yes
checking for strerror... yes
checking for strsignal... yes
checking for function prototypes... yes
checking whether setvbuf arguments are reversed... no
checking for working strcoll... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for unistd.h... (cached) yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for vprintf... yes
checking for _doprnt... no
checking whether closedir returns void... no
checking for getloadavg... yes
checking for pstat_getdynamic... no
checking for kstat_open in -lkstat... no
checking for getloadavg... yes
checking whether getloadavg requires setgid... no
checking for sys_siglist declaration in signal.h or unistd.h... yes
checking sys/wait.h usability... yes
checking sys/wait.h presence... yes
checking for sys/wait.h... yes
checking for waitpid... yes
checking for wait3... yes
checking for union wait... no
checking for SA_RESTART... yes
checking for location of SCCS get command... get
checking if system libc has GNU glob... yes
checking if malloc debugging is wanted... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating glob/Makefile
config.status: creating po/Makefile.in
config.status: creating config/Makefile
config.status: creating doc/Makefile
config.status: creating build.sh
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
[root@localhost make-3.80]#
--nextPart41681743.iNCsQaf8KY
Content-Type: text/plain; name="msgmodule-init-tools3"
Content-Transfer-Encoding: 8Bit
Content-Disposition: attachment; filename="msgmodule-init-tools3"

module-init-tools 3

[root@localhost module-init-tools-3.0]# ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
configure: Adding gcc options: -g -O2 -Wunused -Wall
configure: creating ./config.status
config.status: creating Makefile
config.status: executing depfiles commands
[root@localhost module-init-tools-3.0]#

[root@localhost module-init-tools-3.0]# make
gcc -g -O2 -Wunused -Wall -o insmod.static -static insmod.o
/usr/bin/ld: cannot find -lc
collect2: ld returned 1 exit status
make: *** [insmod.static] Erreur 1
[root@localhost module-init-tools-3.0]#

--nextPart41681743.iNCsQaf8KY
Content-Type: text/x-csrc; name="msgutil-linux"
Content-Transfer-Encoding: 8Bit
Content-Disposition: attachment; filename="msgutil-linux"

util-linux-2.12


[root@localhost util-linux-2.12pre]# ./configure

configuring util-linux-2.12pre

You have <scsi/scsi.h>
You have <linux/blkpg.h>
You have <linux/kd.h>
You have <locale.h>
You have <langinfo.h>
You have <sys/user.h>
You have <rpcsvc/nfs_prot.h>
You have <asm/types.h>
You have <linux/raw.h>
You have inet_aton()
You have fsync()
You have getdomainname()
You have nanosleep()
You have personality()
You have updwtmp()
You have fseeko()
You have lchown()
You have rpmatch()
You don't need <linux/tqueue.h>
You have <term.h>
You have ncurses. Using <ncurses/curses.h>.
You have termcap
You need -lcrypt
Strange... Static compilation fails here.
You have <libintl.h> and gettext()
You have __progname
You have <pty.h> and openpty()
You have wide character support
You have __NR_pivot_root
You have a tm_gmtoff field in struct tm
Your rpcgen seems to work
You have zlib
[root@localhost util-linux-2.12pre]#




--nextPart41681743.iNCsQaf8KY--