Twitter iPhone pliant OnePlus 11 PS5 Disney+ Orange Livebox Windows 11

Problème démarrage Mandriva 2006 après installation

6 réponses
Avatar
chauss
Bonjour =E0 tous,

Cela fait maintenant 1 semaine que j'essaye d'installer Mandriva 2006.

En fait l'installation ce passe tout =E0 fait normalement. Arriv=E9 =E0 la
phase de r=E9sum=E9, le programme d'installation me dit qu'il y a un
probl=E8me avec ma carte graphique (classique car c'est une nVidia),
pour =E9viter tout probl=E8me, je vais dans l'entr=E9e Xorg et je choisi
"Vesa", de plus je prends soin de lui demander de ne pas lancer
l'interface graphique au d=E9marrage.

Le probl=E8me, c'est que lorsque le syst=E8me red=E9marre, il va jusqu'au
bout du boot (je vois appara=EEtre le message d'invit de la console)
puis plantage imm=E9diat (l'=E9cran se remplit de plein de messages et on
finit par un Kernel Panic).

Quand je d=E9marre en failsafe (run level 1), je vais jusqu'au bout du
boot et la machine fonctionne.

L=E0 je fais un # init 2 et je me trouve en runlevel 2, donc, toujours
en console mais en mode multi-utilisateur.

Je rentre un startx et je me retrouve sous l'environement graphique
(avec les pilotes vesa car les nv g=E9n=E9riques sont d=E9ffectueux).

Tout est fonctionnel en mode graphique :

- tous les p=E9riph=E9riques sont l=E0 sauf la cl=E9 USB ;
- les applications tournent (openoffice etc...) ;
- la connexion internet est fonctionnelle (livebox sur port ethernet).

Je termine la session pour revenir en mode console.

Je tente un # init 3 et l=E0 je vois la liste des services
suppl=E9mentaires qui d=E9marrent, je vois quelques instants le prompt
final (invite de commande) et la =E7a plante.

Plein de messages incompr=E9hensibles sont affich=E9s et cela se termine
par un Kernel Panic.

Donc, je suppose que j'ai l'un des services qui est lanc=E9 lorsque je
passe du run level 2 au run level 3 qui me met la panique.

1=2E il faut que je rep=E8re ce service ;
2=2E faut que je comprenne avec quel p=E9riph=E9rique il rentre en conflit.

Une piste ?

P=2ES :

J'ai =E9galement pris soin, avant l'installation, de d=E9sactiver PnP
dans le BIOS.

J'aissaie aussi de lancer mandriva en passant des options comme :

linux no apic acpi=3Doff, mais rien n'y fait.

J'ai =E9galement t=E9l=E9charg=E9 memtest86+, mais pas d'erreur d=E9tect=E9=
e=2E

J'ai pens=E9 =E0 v=E9rifier les md5sum des images ISO avant de graver les
CD.

J'ai =E9galement essay=E9 un live CD unbuntu 5.04, et il plante au m=EAme
endroit, plus pr=E9cis=E9ment dans la phase "starting hardware
abstraction layer". Ce live CD fonctionnait tr=E8s bien avant que je ne
remplace la carte graphique, la carte m=E8re, et l'=E9cran (bref, presque
tout !).

Par contre mon live CD Kallea Knoppix Azur boot sans aucun probl=E8me.

Ordinateur
Syst=E8me d'exploitation Microsoft Windows XP Professional
Service Pack du syst=E8me Service Pack 2
Internet Explorer 6.0.2900.2180
Nom du syst=E8me PC_BUREAU
Nom d'utilisateur ychausson
Domaine de connexion PC_BUREAU

Carte m=E8re
Type de processeur AMD Athlon XP, 1000 MHz (5 x 200)
Nom de la carte m=E8re MSI KT4-V via KT400
Chipset de la carte m=E8re VIA VT8377 Apollo KT600
M=E9moire syst=E8me 512 Mo (PC3200 DDR SDRAM)
Type de BIOS AMI (08/12/04)
Port de communication Port de communication (COM1)
Port de communication Port imprimante ECP (LPT1)

Moniteur
Carte vid=E9o ASUS V9520-X V62.11 (128 Mo)
Acc=E9l=E9rateur 3D nVIDIA GeForce FX 5200
Moniteur Belinea 10 19 02 / Art. No. 111916 [NoDB] (151174)

Multim=E9dia
Carte audio VIA AC'97 Enhanced Audio Controller

Stockage
Lecteur de disquettes Lecteur de disquettes
Disque dur IOMEGA ZIP 100
Disque dur MAXTOR 6L040J2 (40 Go, 7200 RPM, Ultra-ATA/133)
Disque dur WDC WD64AA
Lecteur optique ASUS CD-S520/A4 (52x CD-ROM)
Lecteur optique TEAC CD-W512SB SCSI CdRom Device (12x/10x/32x CD-RW)

Partitions
C: (FAT32) 19992 Mo (15028 Mo libre)
D: (FAT32) 6137 Mo (150 Mo libre)
E: (FAT32) 11989 Mo (5844 Mo libre)

Entr=E9e
Clavier Clavier standard 101/102 touches ou clavier Microsoft Natural
Keyboard PS/2
Souris Souris compatible PS/2

R=E9seau
Adresse IP principale 192.168.1.10
Adresse MAC principale 00-11-09-63-1C-1D
Carte r=E9seau Carte Fast Ethernet compatible VIA (192.168.1.10)
Modem HSP56 Micromodem

P=E9riph=E9riques
Imprimante HP LaserJet 5L
Imprimante PDFCreator
P=E9riph=E9rique USB P=E9riph=E9rique de stockage de masse USB

6 réponses

Avatar
Emmanuel Fleury
Salut,

Y-a-t-il un message du noyau relatif aux crash dans /var/log/messages ?

S'agit-il d'un kernel panic ou juste d'un freeze de la carte graphique
et du clavier ? (un kernel panic fait habituellement clignoter les leds
Num+Caps+Scroll)

Un Oops généré par un kernel panic ressemble à ça:

==================== Oops ========================= Unable to handle kernel NULL pointer dereference at virtual address 00000004
printing eip:
c01c5b5d
*pde = 00000000
Oops: 0002
f t binfmt_misc autofs 8139too mii ide-cd cdrom ehci-hcd usb-uhci
usbcore ext3
CPU: 0
EIP: 0010:[<c01c5b5d>] Tainted: P
EFLAGS: 00010006

EIP is at alloc_skb [kernel] 0x7d (2.4.18-3)

eax: c6bca500 ebx: 00000013 ecx: 00000202 edx: 00000000
esi: 000001e0 edi: 00000000 ebp: c4ea65a0 esp: c4545a1c
ds: 0018 es: 0018 ss: 0018

Process ping (pid: 1171, stackpageÄ545000)

Stack: 000001e0 c4544000 c01c5083 0000008f 000001e0 c6bca5c0 c02d16e0
c6bca5c0
c594d120 c01cd509 00000010 c4ea65a0 00000000 c4ea65a0 c01c51fb
c4ea65a0
0000008f 00000000 00000000 c4545a84 c01de445 c4ea65a0 0000008f
00000000
Call Trace:
[<c01c5083>] sock_alloc_send_pskb [kernel] 0x73
[<c01cd509>] neigh_resolve_output [kernel] 0xc9
[<c01c51fb>] sock_alloc_send_skb [kernel] 0x1b
[<c01de445>] ip_build_xmit [kernel] 0x105
[<c01f6ed6>] udp_sendmsg [kernel] 0x386
[<c01f6a20>] udp_getfrag [kernel] 0x0
[<c01778e9>] scrup [kernel] 0x69
[<c01b3192>] vgacon_cursor [kernel] 0x192
[<c01fcc65>] inet_sendmsg [kernel] 0x35

Code: c7 42 04 c0 be 36 c0 89 15 c0 be 36 c0 c7 00 00 00 00 00 c7
<0>Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing

================================= Ksymoops =============================== ksymoops 2.4.4 on i686 2.4.18-3. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.18-3/ (default)
-m /boot/System.map-2.4.18-3 (default)

On y voit l'état du processeur (contenu des différents registres), le
contenu de la pile (stack) de données et la pile des appels de fonctions
(call trace).

Si tu pouvais trouver un tel Oops, cela aiderai pas mal.

Pour les informations utiles, tu en a donné pas mal (trop à mon avis),
mais tu as oublié de donner la version du noyau que tu utilises, la
version de Xorg et la version du driver propriétaire Nvidia.

Amicalement
--
Emmanuel Fleury

I'm ok with other people using NT. When it's better for them, that's
their choice. I work hard to make sure that the Linux kernel is
technically superior, and if I feel it isn't I want to fix it.
Because I do _not_ want people using Linux for religious reasons.
I want people to use Linux because it is _better_ for them, because they
truly believe that they can make it so (or at least have fun trying).
-- Linus Torvalds
Avatar
chauss
Emmanuel,

Tout d'abord, merci de bien vouloir me porter assistance, car je
commence à me décourrager.

Je réponds à tes demandes de précisions :

Version du noyau :
- mdk

Version de X.org Mandriva Linux (X.org X11 6.9, patch level
1.csv20050915 .2mdk) :
6.8.99.900

version du driver nVidia :
1.0-7676

Je démarre en int 3 pour faire planter l'ordinateur, je redémarre en
init 2, je me logg en root, puis je lance KDE. Je prend une Konsole et
je tappe : kysmoops -v. Le résultat obtenu est :

ksymoops 2.4.9 on i686 2.6.12-12mdk. Options used
-V (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.12-12mdk/ (default)
-m /boot/System.map-2.6.12-12mdk (default)

Error (regular_file): read_ksyms stat /proc/ksyms failed
/usr/bin/ksymoops.real: No such file or directory
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Reading Oops report from the terminal

Puis plus rien, la console est bloquée ....

Une idée ????

D'avance merci
Avatar
chauss
Emmanuel,

J'ai oublié de te fournir le contenu de /var/log/message. La séquence
d'un boot defectueux qui aboutit au gèle de la machine est la suivante
:

========================= ====================

Nov 28 14:58:37 localhost syslogd 1.4.1: restart.
Nov 28 14:58:37 localhost kernel: klogd 1.4.1, log source = /proc/kmsg
started.
Nov 28 14:58:37 localhost kernel: Inspecting
/boot/System.map-2.6.12-12mdk
Nov 28 14:58:37 localhost kernel: Loaded 20751 symbols from
/boot/System.map-2.6.12-12mdk.
Nov 28 14:58:37 localhost kernel: Symbols match kernel version 2.6.12.
Nov 28 14:58:37 localhost kernel: No module symbols loaded - kernel
modules not enabled.
Nov 28 14:58:37 localhost kernel: Linux version 2.6.12-12mdk
() (gcc version 4.0.1 (4.0.1-5mdk for Mandriva
Linux release 2006.0)) #1 Fri Sep 9 18:15:22 CEST 2005
Nov 28 14:58:37 localhost kernel: BIOS-provided physical RAM map:
Nov 28 14:58:37 localhost kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Nov 28 14:58:37 localhost kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Nov 28 14:58:37 localhost kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Nov 28 14:58:37 localhost kernel: BIOS-e820: 0000000000100000 -
000000001fff0000 (usable)
Nov 28 14:58:37 localhost kernel: BIOS-e820: 000000001fff0000 -
000000001fff8000 (ACPI data)
Nov 28 14:58:37 localhost kernel: BIOS-e820: 000000001fff8000 -
0000000020000000 (ACPI NVS)
Nov 28 14:58:37 localhost kernel: BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
Nov 28 14:58:37 localhost kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Nov 28 14:58:37 localhost kernel: BIOS-e820: 00000000fff80000 -
0000000100000000 (reserved)
Nov 28 14:58:37 localhost kernel: 0MB HIGHMEM available.
Nov 28 14:58:37 localhost kernel: 511MB LOWMEM available.
Nov 28 14:58:37 localhost kernel: found SMP MP-table at 000fb930
Nov 28 14:58:37 localhost kernel: DMI 2.3 present.
Nov 28 14:58:37 localhost kernel: Intel MultiProcessor Specification
v1.4
Nov 28 14:58:37 localhost kernel: Virtual Wire compatibility mode.
Nov 28 14:58:37 localhost kernel: OEM ID: VIA Product ID: VT5440B
APIC at: 0xFEE00000
Nov 28 14:58:37 localhost kernel: Processor #0 6:8 APIC version 17
Nov 28 14:58:37 localhost kernel: I/O APIC #2 Version 3 at 0xFEC00000.
Nov 28 14:58:37 localhost kernel: Enabling APIC mode: Flat. Using 1
I/O APICs
Nov 28 14:58:37 localhost kernel: Processors: 1
Nov 28 14:58:37 localhost kernel: Allocating PCI resources starting at
20000000 (gap: 20000000:dec00000)
Nov 28 14:58:37 localhost kernel: Built 1 zonelists
Nov 28 14:58:37 localhost kernel: Initializing CPU#0
Nov 28 14:58:37 localhost kernel: Kernel command line: BOOT_IMAGE=linux
root06 noapic nolapic acpi=off resume=/dev/hda7 splash=silent
Nov 28 14:58:37 localhost kernel: bootsplash: silent mode.
Nov 28 14:58:37 localhost kernel: PID hash table entries: 2048 (order:
11, 32768 bytes)
Nov 28 14:58:37 localhost kernel: Detected 1004.624 MHz processor.
Nov 28 14:58:37 localhost kernel: Using tsc for high-res timesource
Nov 28 14:58:37 localhost kernel: Console: colour dummy device 80x25
Nov 28 14:58:37 localhost kernel: Dentry cache hash table entries:
131072 (order: 7, 524288 bytes)
Nov 28 14:58:37 localhost kernel: Inode-cache hash table entries: 65536
(order: 6, 262144 bytes)
Nov 28 14:58:37 localhost kernel: Memory: 514736k/524224k available
(2348k kernel code, 8928k reserved, 717k data, 268k init, 0k highmem,
0k BadRAM)
Nov 28 14:58:37 localhost kernel: Checking if this processor honours
the WP bit even in supervisor mode... Ok.
Nov 28 14:58:37 localhost kernel: Mount-cache hash table entries: 512
Nov 28 14:58:37 localhost kernel: CPU: L1 I Cache: 64K (64 bytes/line),
D cache 64K (64 bytes/line)
Nov 28 14:58:37 localhost kernel: CPU: L2 Cache: 256K (64 bytes/line)
Nov 28 14:58:37 localhost kernel: Intel machine check architecture
supported.
Nov 28 14:58:37 localhost kernel: Intel machine check reporting enabled
on CPU#0.
Nov 28 14:58:37 localhost kernel: CPU: AMD Sempron(tm) 3200+ stepping
01
Nov 28 14:58:37 localhost kernel: Enabling fast FPU save and restore...
done.
Nov 28 14:58:37 localhost kernel: Enabling unmasked SIMD FPU exception
support... done.
Nov 28 14:58:37 localhost kernel: Checking 'hlt' instruction... OK.
Nov 28 14:58:37 localhost kernel: BIOS bug, local APIC #0 not
detected!...
Nov 28 14:58:37 localhost kernel: checking if image is initramfs...it
isn't (no cpio magic); looks like an initrd
Nov 28 14:58:37 localhost kernel: Freeing initrd memory: 267k freed
Nov 28 14:58:37 localhost kernel: NET: Registered protocol family 16
Nov 28 14:58:37 localhost kernel: PCI: PCI BIOS revision 2.10 entry at
0xfdab1, last bus=1
Nov 28 14:58:37 localhost kernel: PCI: Using configuration type 1
Nov 28 14:58:37 localhost kernel: mtrr: v2.0 (20020519)
Nov 28 14:58:37 localhost kernel: ACPI: Subsystem revision 20050309
Nov 28 14:58:37 localhost kernel: ACPI: Interpreter disabled.
Nov 28 14:58:37 localhost kernel: Linux Plug and Play Support v0.97 (c)
Adam Belay
Nov 28 14:58:37 localhost kernel: pnp: PnP ACPI: disabled
Nov 28 14:58:37 localhost kernel: PnPBIOS: Disabled
Nov 28 14:58:37 localhost kernel: PCI: Probing PCI hardware
Nov 28 14:58:37 localhost kernel: PCI: Probing PCI hardware (bus 00)
Nov 28 14:58:37 localhost kernel: PCI: Using IRQ router default
[1106/3227] at 0000:00:11.0
Nov 28 14:58:37 localhost kernel: PCI: IRQ 0 for device 0000:00:0f.0
doesn't match PIRQ mask - try pci=usepirqmask
Nov 28 14:58:37 localhost kernel: apm: BIOS version 1.2 Flags 0x03
(Driver version 1.16ac)
Nov 28 14:58:37 localhost kernel: audit: initializing netlink socket
(disabled)
Nov 28 14:58:37 localhost kernel: audit(1133189898.621:0): initialized
Nov 28 14:58:37 localhost kernel: VFS: Disk quotas dquot_6.5.1
Nov 28 14:58:37 localhost kernel: Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
Nov 28 14:58:37 localhost kernel: devfs: 2004-01-31 Richard Gooch
()
Nov 28 14:58:37 localhost kernel: devfs: boot_options: 0x0
Nov 28 14:58:37 localhost kernel: Initializing Cryptographic API
Nov 28 14:58:37 localhost kernel: vesafb: framebuffer at 0xd0000000,
mapped to 0xe0880000, using 3750k, total 131072k
Nov 28 14:58:37 localhost kernel: vesafb: mode is 800x600x16,
linelength00, pages=2
Nov 28 14:58:37 localhost kernel: vesafb: protected mode interface info
at c000:e340
Nov 28 14:58:37 localhost kernel: vesafb: scrolling: redraw
Nov 28 14:58:37 localhost kernel: vesafb: Truecolor: size=0:5:6:5,
shift=0:11:5:0
Nov 28 14:58:37 localhost kernel: bootsplash 3.1.6-2004/03/31: looking
for picture...<6> silentjpeg size 34430 bytes,<6>...found (800x600,
34382 bytes, v3).
Nov 28 14:58:37 localhost kernel: Console: switching to colour frame
buffer device 93x30
Nov 28 14:58:37 localhost kernel: fb0: VESA VGA frame buffer device
Nov 28 14:58:37 localhost kernel: isapnp: Scanning for PnP cards...
Nov 28 14:58:37 localhost kernel: isapnp: No Plug & Play device found
Nov 28 14:58:37 localhost kernel: Real Time Clock Driver v1.12
Nov 28 14:58:37 localhost kernel: PNP: No PS/2 controller found.
Probing ports directly.
Nov 28 14:58:37 localhost kernel: serio: i8042 AUX port at 0x60,0x64
irq 12
Nov 28 14:58:37 localhost kernel: serio: i8042 KBD port at 0x60,0x64
irq 1
Nov 28 14:58:37 localhost kernel: Serial: 8250/16550 driver $Revision:
1.90 $ 8 ports, IRQ sharing enabled
Nov 28 14:58:37 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a
16550A
Nov 28 14:58:37 localhost kernel: io scheduler noop registered
Nov 28 14:58:37 localhost kernel: io scheduler anticipatory registered
Nov 28 14:58:37 localhost kernel: io scheduler deadline registered
Nov 28 14:58:37 localhost kernel: io scheduler cfq registered
Nov 28 14:58:37 localhost kernel: RAMDISK driver initialized: 16 RAM
disks of 32000K size 1024 blocksize
Nov 28 14:58:37 localhost kernel: pktcdvd: v0.2.0a 2004-07-14 Jens
Axboe () and
Nov 28 14:58:37 localhost kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Nov 28 14:58:37 localhost kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
Nov 28 14:58:37 localhost kernel: VP_IDE: IDE controller at PCI slot
0000:00:0f.0
Nov 28 14:58:37 localhost kernel: PCI: IRQ 0 for device 0000:00:0f.0
doesn't match PIRQ mask - try pci=usepirqmask
Nov 28 14:58:37 localhost kernel: PCI: Via IRQ fixup for 0000:00:0f.0,
from 255 to 0
Nov 28 14:58:37 localhost kernel: VP_IDE: chipset revision 6
Nov 28 14:58:37 localhost kernel: VP_IDE: not 100%% native mode: will
probe irqs later
Nov 28 14:58:37 localhost kernel: VP_IDE: VIA vt8237 (rev 00) IDE
UDMA133 controller on pci0000:00:0f.0
Nov 28 14:58:37 localhost kernel: ide0: BM-DMA at 0xfc00-0xfc07,
BIOS settings: hda:DMA, hdb:DMA
Nov 28 14:58:37 localhost kernel: ide1: BM-DMA at 0xfc08-0xfc0f,
BIOS settings: hdc:DMA, hdd:pio
Nov 28 14:58:37 localhost kernel: hda: MAXTOR 6L040J2, ATA DISK drive
Nov 28 14:58:37 localhost kernel: hdb: WDC WD64AA, ATA DISK drive
Nov 28 14:58:37 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 28 14:58:37 localhost kernel: hdc: ASUS CD-S520/A4, ATAPI
CD/DVD-ROM drive
Nov 28 14:58:37 localhost kernel: hdd: IOMEGA ZIP 100 ATAPI, ATAPI
FLOPPY drive
Nov 28 14:58:37 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 28 14:58:37 localhost kernel: hda: max request size: 128KiB
Nov 28 14:58:37 localhost kernel: hda: 78177792 sectors (40027 MB)
w/1818KiB Cache, CHSe535/16/63, UDMA(133)
Nov 28 14:58:37 localhost kernel: hda: cache flushes supported
Nov 28 14:58:37 localhost kernel: /dev/ide/host0/bus0/target0/lun0: p1
p2 < p5 p6 p7 p8 >
Nov 28 14:58:37 localhost kernel: hdb: max request size: 128KiB
Nov 28 14:58:37 localhost kernel: hdb: 12594960 sectors (6448 MB)
w/2048KiB Cache, CHS328/15/63
Nov 28 14:58:37 localhost kernel: hdb: cache flushes not supported
Nov 28 14:58:37 localhost kernel: /dev/ide/host0/bus0/target1/lun0: p1
Nov 28 14:58:37 localhost kernel: mice: PS/2 mouse device common for
all mice
Nov 28 14:58:37 localhost kernel: md: md driver 0.90.1 MAX_MD_DEVS%6,
MD_SB_DISKS'
Nov 28 14:58:37 localhost kernel: NET: Registered protocol family 2
Nov 28 14:58:37 localhost kernel: IP: routing cache hash table of 4096
buckets, 32Kbytes
Nov 28 14:58:37 localhost kernel: TCP established hash table entries:
32768 (order: 6, 262144 bytes)
Nov 28 14:58:37 localhost kernel: TCP bind hash table entries: 32768
(order: 5, 131072 bytes)
Nov 28 14:58:37 localhost kernel: TCP: Hash tables configured
(established 32768 bind 32768)
Nov 28 14:58:37 localhost kernel: NET: Registered protocol family 1
Nov 28 14:58:37 localhost kernel: swsusp: Suspend partition has wrong
signature?
Nov 28 14:58:37 localhost kernel: BIOS EDD facility v0.16 2004-Jun-25,
2 devices found
Nov 28 14:58:37 localhost kernel: devfs_mk_dev: could not append to
parent for md/0
Nov 28 14:58:37 localhost kernel: md: Autodetecting RAID arrays.
Nov 28 14:58:37 localhost kernel: md: autorun ...
Nov 28 14:58:37 localhost kernel: md: ... autorun DONE.
Nov 28 14:58:37 localhost kernel: RAMDISK: Compressed image found at
block 0
Nov 28 14:58:37 localhost kernel: input: AT Translated Set 2 keyboard
on isa0060/serio0
Nov 28 14:58:37 localhost kernel: VFS: Mounted root (ext2 filesystem).
Nov 28 14:58:37 localhost kernel: SCSI subsystem initialized
Nov 28 14:58:37 localhost kernel: dc395x: Tekram DC395(U/UW/F),
DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08
Nov 28 14:58:37 localhost kernel: dc395x: Used settings: AdapterID,
Speed=0(20.0MHz), dev_mode=0x57
Nov 28 14:58:37 localhost kernel: dc395x:
AdaptMode=0x0f, Tags=4(16), DelayReset=1s
Nov 28 14:58:37 localhost kernel: dc395x: Connectors: int50
Termination: Auto Low High
Nov 28 14:58:37 localhost kernel: dc395x: Performing initial SCSI bus
reset
Nov 28 14:58:37 localhost kernel: scsi0 : Tekram DC395(U/UW/F),
DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08
Nov 28 14:58:37 localhost kernel: logips2pp: Detected unknown logitech
mouse model 85
Nov 28 14:58:37 localhost kernel: input: ImPS/2 Logitech Wheel Mouse on
isa0060/serio1
Nov 28 14:58:37 localhost kernel: Vendor: TEAC Model: CD-W512SB
Rev: 1.0B
Nov 28 14:58:37 localhost kernel: Type: CD-ROM
ANSI SCSI revision: 02
Nov 28 14:58:37 localhost kernel: kjournald starting. Commit interval
5 seconds
Nov 28 14:58:37 localhost kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Nov 28 14:58:37 localhost kernel: Freeing unused kernel memory: 268k
freed
Nov 28 14:58:37 localhost kernel: dc395x: Target 03: Sync: 48ns Offset
8 (20.8 MB/s)
Nov 28 14:58:37 localhost kernel: sr0: scsi3-mmc drive: 32x/32x writer
cd/rw xa/form2 cdda tray
Nov 28 14:58:37 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Nov 28 14:58:37 localhost kernel: usbcore: registered new driver usbfs
Nov 28 14:58:37 localhost kernel: usbcore: registered new driver hub
Nov 28 14:58:37 localhost kernel: USB Universal Host Controller
Interface driver v2.2
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.0: UHCI Host
Controller
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.0: new USB bus
registered, assigned bus number 1
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.0: irq 11, io
base 0x0000d800
Nov 28 14:58:37 localhost kernel: hub 1-0:1.0: USB hub found
Nov 28 14:58:37 localhost kernel: hub 1-0:1.0: 2 ports detected
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.1: UHCI Host
Controller
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.1: new USB bus
registered, assigned bus number 2
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.1: irq 11, io
base 0x0000dc00
Nov 28 14:58:37 localhost kernel: hub 2-0:1.0: USB hub found
Nov 28 14:58:37 localhost kernel: hub 2-0:1.0: 2 ports detected
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.2: UHCI Host
Controller
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.2: new USB bus
registered, assigned bus number 3
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.2: irq 5, io base
0x0000e000
Nov 28 14:58:37 localhost kernel: hub 3-0:1.0: USB hub found
Nov 28 14:58:37 localhost kernel: hub 3-0:1.0: 2 ports detected
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.3: UHCI Host
Controller
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.3: new USB bus
registered, assigned bus number 4
Nov 28 14:58:37 localhost kernel: uhci_hcd 0000:00:10.3: irq 5, io base
0x0000e400
Nov 28 14:58:37 localhost kernel: hub 4-0:1.0: USB hub found
Nov 28 14:58:37 localhost kernel: hub 4-0:1.0: 2 ports detected
Nov 28 14:58:37 localhost kernel: ehci_hcd 0000:00:10.4: EHCI Host
Controller
Nov 28 14:58:37 localhost kernel: ehci_hcd 0000:00:10.4: new USB bus
registered, assigned bus number 5
Nov 28 14:58:37 localhost kernel: ehci_hcd 0000:00:10.4: irq 3, io mem
0xdfffee00
Nov 28 14:58:37 localhost kernel: ehci_hcd 0000:00:10.4: USB 2.0
initialized, EHCI 1.00, driver 10 Dec 2004
Nov 28 14:58:37 localhost kernel: hub 5-0:1.0: USB hub found
Nov 28 14:58:37 localhost kernel: hub 5-0:1.0: 8 ports detected
Nov 28 14:58:37 localhost kernel: ts: Compaq touchscreen protocol
output
Nov 28 14:58:37 localhost kernel: usb 5-5: new high speed USB device
using ehci_hcd and address 2
Nov 28 14:58:37 localhost kernel: EXT3 FS on hda6, internal journal
Nov 28 14:58:37 localhost kernel: Adding 690752k swap on /dev/hda7.
Priority:-1 extents:1
Nov 28 14:58:37 localhost kernel: Linux agpgart interface v0.101 (c)
Dave Jones
Nov 28 14:58:37 localhost kernel: agpgart: Detected VIA
KT400/KT400A/KT600 chipset
Nov 28 14:58:37 localhost kernel: agpgart: AGP aperture is 128M @
0xe0000000
Nov 28 14:58:37 localhost kernel: kjournald starting. Commit interval
5 seconds
Nov 28 14:58:37 localhost kernel: EXT3 FS on hda8, internal journal
Nov 28 14:58:37 localhost kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Nov 28 14:58:37 localhost kernel: Supermount version 2.0.4 for kernel
2.6
Nov 28 14:58:37 localhost kernel: Initializing USB Mass Storage
driver...
Nov 28 14:58:37 localhost kernel: scsi1 : SCSI emulation for USB Mass
Storage devices
Nov 28 14:58:37 localhost kernel: usbcore: registered new driver
usb-storage
Nov 28 14:58:37 localhost kernel: USB Mass Storage support registered.
Nov 28 14:58:37 localhost kernel: loop: loaded (max 8 devices)
Nov 28 14:58:37 localhost kernel: hdc: ATAPI 52X CD-ROM drive, 128kB
Cache, UDMA(33)
Nov 28 14:58:37 localhost kernel: Floppy drive(s): fd0 is 1.44M
Nov 28 14:58:37 localhost kernel: FDC 0 is a post-1991 82077
Nov 28 14:58:37 localhost kernel: NET: Registered protocol family 17
Nov 28 14:58:37 localhost kernel: via-rhine.c:v1.10-LK1.2.0-2.6
June-10-2004 Written by Donald Becker
Nov 28 14:58:37 localhost kernel: Vendor: RAmosTek Model: RunDisk
Rev: 3.01
Nov 28 14:58:37 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 02
Nov 28 14:58:37 localhost kernel: SCSI device sda: 1039040 512-byte
hdwr sectors (532 MB)
Nov 28 14:58:37 localhost kernel: sda: Write Protect is off
Nov 28 14:58:37 localhost kernel: sda: assuming drive cache: write
through
Nov 28 14:58:37 localhost kernel: SCSI device sda: 1039040 512-byte
hdwr sectors (532 MB)
Nov 28 14:58:37 localhost kernel: sda: Write Protect is off
Nov 28 14:58:37 localhost kernel: sda: assuming drive cache: write
through
Nov 28 14:58:37 localhost kernel: /dev/scsi/host1/bus0/target0/lun0:
p1
Nov 28 14:58:37 localhost kernel: Attached scsi removable disk sda at
scsi1, channel 0, id 0, lun 0
Nov 28 14:58:37 localhost kernel: eth0: VIA Rhine II at 0x1d000,
00:11:09:63:1c:1d, IRQ 11.
Nov 28 14:58:37 localhost kernel: eth0: link up, 100Mbps, full-duplex,
lpa 0xFFFF
Nov 28 14:58:37 localhost partmon: Vérification de l'espace libre sur
les partitions :
Nov 28 14:58:37 localhost partmon:
Nov 28 14:58:37 localhost rc: Lancement de partmon : succeeded
Nov 28 14:58:38 localhost rpc.statd[2587]: Version 1.0.7 Starting
Nov 28 14:58:38 localhost rpc.statd[2587]: statd running as root. chown
/var/lib/nfs/sm to choose different user
Nov 28 14:58:38 localhost nfslock: Démarrage de rpc.statd succeeded
Nov 28 14:58:38 localhost kernel: parport0: PC-style at 0x378 (0x778)
[PCSPP,TRISTATE,EPP]
Nov 28 14:58:38 localhost kernel: parport0: irq 7 detected
Nov 28 14:58:38 localhost kernel: parport0: Printer, Hewlett-Packard HP
LaserJet 5L
Nov 28 14:58:38 localhost kernel: lp0: using parport0 (polling).
Nov 28 14:58:38 localhost kernel: lp0: console ready
Nov 28 14:58:40 localhost dhclient: DHCPREQUEST on eth0 to
255.255.255.255 port 67
Nov 28 14:58:40 localhost dhclient: DHCPACK from 192.168.1.1
Nov 28 14:58:40 localhost dhclient: bound to 192.168.1.12 -- renewal in
276994 seconds.
Nov 28 14:58:40 localhost ifplugd(eth0)[2376]: client: Determining IP
information for eth0... done.
Nov 28 14:58:40 localhost ifplugd(eth0)[2376]: Program executed
successfully.
Nov 28 14:58:40 localhost cups: Démarrage de cupsd succeeded
Nov 28 14:58:42 localhost alsa: succeeded
Nov 28 14:58:43 localhost xfs: Démarrage de xfs succeeded
Nov 28 14:58:43 localhost xfs[3088]: ignoring font path element
/usr/X11R6/lib/X11/fonts/drakfont (unreadable)
Nov 28 14:58:43 localhost xfs[3088]: ignoring font path element
/usr/X11R6/lib/X11/fonts/drakfont/Type1 (unreadable)
Nov 28 14:58:43 localhost xfs[3088]: ignoring font path element
/usr/X11R6/lib/X11/fonts/drakfont/ttf (unreadable)
Nov 28 14:58:43 localhost xfs[3088]: ignoring font path element
/usr/X11R6/lib/X11/fonts/100dpi:unscaled (unreadable)
Nov 28 14:58:43 localhost messagebus: Démarrage de messagebus
succeeded
Nov 28 14:58:44 localhost haldaemon: Démarrage de haldaemon succeeded
Nov 28 14:58:44 localhost netfs: Montage des autres systèmes de
fichiers : succeeded
Nov 28 14:58:44 localhost numlock: Lancement du verrouillage numérique
:
Nov 28 14:58:44 localhost numlock: ^[[65G[^[[1;32m
Nov 28 14:58:44 localhost numlock: OK
Nov 28 14:58:44 localhost numlock:
Nov 28 14:58:44 localhost fstab-sync[3204]: removed all generated mount
points
Nov 28 14:58:44 localhost rc: Lancement de numlock : succeeded
Nov 28 14:58:45 localhost su(pam_unix)[3333]: session opened for user
nobody by (uid=0)
Nov 28 14:58:45 localhost fstab-sync[3305]: added mount point
/mnt/K_USB for /dev/sda1
Nov 28 14:58:45 localhost su(pam_unix)[3333]: session closed for user
nobody
Nov 28 14:58:45 localhost mDNSResponder: Démarrage de succeeded
Nov 28 14:58:46 localhost atd: Démarrage de atd succeeded
Nov 28 14:58:46 localhost xinetd: Démarrage de xinetd succeeded
Nov 28 14:58:46 localhost xinetd[3468]: xinetd Version 2.3.13 started
with libwrap options compiled in.
Nov 28 14:58:46 localhost xinetd[3468]: Started working: 0 available
services

========================= =========================

Certes c'est un peu long.....

@+
Avatar
Thibaut Paumard
"chauss" writes:

Bonjour à tous,
[...]

Là je fais un # init 2 et je me trouve en runlevel 2, donc, toujours
en console mais en mode multi-utilisateur.

Je rentre un startx et je me retrouve sous l'environement graphique
(avec les pilotes vesa car les nv génériques sont déffectueux).

Tout est fonctionnel en mode graphique :
[...]

Je tente un # init 3 et là je vois la liste des services
supplémentaires qui démarrent, je vois quelques instants le prompt
final (invite de commande) et la ça plante.


Bonjour,

tu peux essayer de lancer ces services un par un à la main en regardant ce
qu'il y a dans /etc/init.d/rc3.d

[...]
Ordinateur
Système d'exploitation Microsoft Windows XP Professional
[...]


Marrant, je croyais que tu étais sous Mandriva 2006.

Cordialement, Thibaut.

Avatar
chauss
Merci pour la réponse,

En fait, je suis en dual boot, mais quand j'excute Aida32 sous windows,
il ne voit pas linux !!!
Avatar
chauss
En cherchant un peu, je m'apperçois que lorsque j'insère un CD da ns
mon graveur TEAC CD-W512SB SCSI, relié à une carte TEKRAM
‎TRM-S1040 le plantage de la machine viens de là.

Je contiue mes recherches.